Related
That can be flashed through Odin?
Im unable to flash any ROMs through CWM or through recovery since I have a problem with the SD card (had this problem after flashing a stock Froyo ROM) also after doing this I cant get into recovery or download through the 3 button combo, used to be able to do it but cant anymore for some reason (I think its also because of the Froyo flash), I have CWM installed and every time I try to flash any ROM it gives me an E:Error cache/sd (Status 2)
I havent been able to fix this issue, so I thought of trying to work around it, I am able to get into download mode using ADB, so I was hoping to find a custom ROM that can be done through Odin, by trying a new custom ROM Im hoping to get rid of my SD card issue (card says its write protected but its not)
Your best bet would be to odin back to stock and go from there. Start back off with a clean slate and be able to use ClockworkMod. Just check the stickies for the proper procedures.
Oh, and just for reference, you are putting the .zip ROM file on the root of you internal memory? If not, try that with ClockworkMod again and see what happens.
Sent from Andromeda Galaxy!
I would have to second the Odin back to stock recommendation as well.
Last thing you want to do is soft brick the phone while it's hardware locked. That's a recipe for hard brick if I ever saw one.
offdutyninja808 said:
Your best bet would be to odin back to stock and go from there. Start back off with a clean slate and be able to use ClockworkMod. Just check the stickies for the proper procedures.
Oh, and just for reference, you are putting the .zip ROM file on the root of you internal memory? If not, try that with ClockworkMod again and see what happens.
Sent from Andromeda Galaxy!
Click to expand...
Click to collapse
Ok thanks for the advice, ya I had it in the root of my internal SD card
Drewstein said:
I would have to second the Odin back to stock recommendation as well.
Last thing you want to do is soft brick the phone while it's hardware locked. That's a recipe for hard brick if I ever saw one.
Click to expand...
Click to collapse
When you guys say stock... do you mean back to stock 2.1 or 2.2?
All my issues have started from flashing a stock 2.2 ROM
Do you guys have a link to a stable stock ROM?
I think I still have the stock ROM that I flashed but Id rather not use that one
Thanks for the help guys
DT3CH said:
Ok thanks for the advice, ya I had it in the root of my internal SD card
When you guys say stock... do you mean back to stock 2.1 or 2.2?
All my issues have started from flashing a stock 2.2 ROM
Do you guys have a link to a stable stock ROM?
I think I still have the stock ROM that I flashed but Id rather not use that one
Thanks for the help guys
Click to expand...
Click to collapse
I am referring to stock 2.1. All the Froyo builds are unofficial. Just do a search in the vibrant Android dev section for JFD. That is the latest official Rom, which 2.1.
Sent from Andromeda!
Hi all,
I would like to flashing back to original rom on my lg optimus one
because my phone always keep hang,such as switch on the phone hang at LG icon,switch on phone then off itself,open application auto jump back to homescreen,can't type any word
so,now i still using stock microsd 2gb
but the question is,can I flashing back to original rom v10e using stock microsd ?
i know already got android 2.2.2,but in Malaysia(my country) v10e is the newest
so,which rom should i download ?
someone tell me to download Singapore version,so i download this one
CDMA LGP500 ASEABK SEA/HUB(SINGAPORE)
so is it correct that i download it ?
Hope all of you can help me solve my problem,because I gonna flashing back to original rom tomorrow or today ~
ya go ahead with singapore rom..
then is it dangerous using stock microsd flashing back to original rom ?
help pls,need you all helping T_T
No its not
From MicroSD you can only flash .zip files. Otherwise you have to usethe LG utility. But if you have such problems with your phone, try to reflash the rom you want to use and don't forget to wipe data and cache before flashing.
ccdreadcc said:
No its not
Click to expand...
Click to collapse
okay thx for ur answering
will flashing it back soon ~
Micky_G said:
From MicroSD you can only flash .zip files. Otherwise you have to usethe LG utility. But if you have such problems with your phone, try to reflash the rom you want to use and don't forget to wipe data and cache before flashing.
Click to expand...
Click to collapse
can you teach me step-by-step how to reflash the rom ??
and i know before flashing back the firmware,i sure backup
currently using mybackup pro
but dunno can backup the application data anot,such as angry bird
almost finish already !!!
Vibrant Stock Rom boots after I odin, wipes all the data and everything but then it freezes on a black screen right after the Galaxy S screen. The screen is black and the buttons are highlighted.
Any help is much appreciated.
Flash this in Odin after you disconnect every USB device, take battery out of phone for few minutes, reboot your computer, only plug your phone into a new USB slot.
http://www.4shared.com/file/dJiyRz3v/EUGENE373_SamsungS_Froyo_PDA.html
^ you should probably point out to flash back to JFD if thats eugenes froyo that doesnt brick
s15274n said:
^ you should probably point out to flash back to JFD if thats eugenes froyo that doesnt brick
Click to expand...
Click to collapse
I thought you only did that if you're running a working rom. Because I flashed this over a custom rom that soft bricked and it worked fine.....but to play it safe, you are right and it's even stated on his thread
crazy25000 said:
Flash this in Odin after you disconnect every USB device, take battery out of phone for few minutes, reboot your computer, only plug your phone into a new USB slot.
http://www.4shared.com/file/dJiyRz3v/EUGENE373_SamsungS_Froyo_PDA.html
Click to expand...
Click to collapse
It didnt work I'm really lost now, how do i fix it please.
This will get you to jfd...it's the original rom.
http://forum.xda-developers.com/showthread.php?t=848737
crazy25000 said:
This will get you to jfd...it's the original rom.
http://forum.xda-developers.com/showthread.php?t=848737
Click to expand...
Click to collapse
I used every type of stock rom there is. Is there anyway to like flash an actual rom like other than the stock ones? I'm on Stock 2.2 now but the sd card just isn't working. Only 1 drive mounts and thats the drive that had avatar on it.
DHackley said:
I used every type of stock rom there is. Is there anyway to like flash an actual rom like other than the stock ones? I'm on Stock 2.2 now but the sd card just isn't working. Only 1 drive mounts and thats the drive that had avatar on it.
Click to expand...
Click to collapse
I posted that because you said that the phone couldn't flash froyo or the other rom.....I was under the impression that your phone was still not booting and stuck at a black screen.....is this not the case?
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
crazy25000 said:
I posted that because you said that the phone couldn't flash froyo or the other rom.....I was under the impression that your phone was still not booting and stuck at a black screen.....is this not the case?
Click to expand...
Click to collapse
My bad man, I forgot to add that It flashes the stock 2.2 froyo. I just cant use my internal sd card. So all i can do is use wifi, service features, but cannot download apps and other stuff like that. The build number: Froyo.UVJK2 is the one it works almost as usual.
So far I have tried to format the sd card and even restore factory reset but nothing has worked.
movieaddict said:
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
Click to expand...
Click to collapse
I tried this about a couple of days ago, You posted this in another thread that I have started. I ended up with no luck though. Thanks man.
Do you have a cwm recovery working?
crazy25000 said:
Do you have a cwm recovery working?
Click to expand...
Click to collapse
No, I can't even reinstall packages on the 2e recovery.
Ok, download rom manager app, flash vibrant recovery, reboot into recovery, reinstall package.
http://forum.xda-developers.com/showthread.php?t=846384
Which kernel are you using? Settings, about, kernel. Just to make sure you flash the correct file.
It says that I don't have enough memory to download any apps.
Am I supposed to Odin that?
First tell me which kernel you have so I can tell you which file to use with Odin.
crazy25000 said:
First tell me which kernel you have so I can tell you which file to use with Odin.
Click to expand...
Click to collapse
Baseband: T959UVJK2
Kernel: 2.6.32.9
Is there anything else after the numbers for the kernel version?
Could anyone tell me if there are any Gingerbread Retail UK rooted CWM flashable firmwares I can't seem to find any, I have tried lots of different rom's but they all seem to have the ATT stuff included which is usless to me.
I'm on the edge of flashing a UK retail SBf but it does worry me having to flash 1.5gb onto my phone. hopefully someone can help
Thanks
Pete
audipete said:
Could anyone tell me if there are any Gingerbread Retail UK rooted CWM flashable firmwares I can't seem to find any, I have tried lots of different rom's but they all seem to have the ATT stuff included which is usless to me.
I'm on the edge of flashing a UK retail SBf but it does worry me having to flash 1.5gb onto my phone. hopefully someone can help
Thanks
Pete
Click to expand...
Click to collapse
Well I flashed the SBF and now my phone just boot loops and I have no CWM or standard wipe bootloader option's, Think I will try a different SBF file when I get home from work. Well gutted
I assume your bootloader is unlocked?
If so then its advised not to use SBFs
As long as you can get into fastboot you can flash cwm and go from there
If you want stock UK Gingerbread i can run you through how to extract system.img and boot.img (can do webtop aswell if you use it) from the sbf and safely flash with fastboot, but CM7 is the way to go
ears1991 said:
I assume your bootloader is unlocked?
If so then its advised not to use SBFs
As long as you can get into fastboot you can flash cwm and go from there
If you want stock UK Gingerbread i can run you through how to extract system.img and boot.img (can do webtop aswell if you use it) from the sbf and safely flash with fastboot, but CM7 is the way to go
Click to expand...
Click to collapse
Thanks for the help installed through fast boot did full wipe now working fine. For some reason my original nandroid back up was damaged.
Thanks
Rofl it STILL SHOCKS me how uniformed people are. Look. Last time im saying this. You can. Not. Brick. Your. Phone. With. The stock 2.3.4 sbf file. Only PREVIOUS versions will brick it. Like froyo or previous. Come on people it aint that difficult. Read.
Sent from my MB860 using Tapatalk
Phalanx7621 said:
Rofl it STILL SHOCKS me how uniformed people are. Look. Last time im saying this. You can. Not. Brick. Your. Phone. With. The stock 2.3.4 sbf file. Only PREVIOUS versions will brick it. Like froyo or previous. Come on people it aint that difficult. Read.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
So if I flashed the sbf file and then pulled the usb cable out half way through the flash the phone would be ok?
Hi im in need of the same thing can you pm or tell me how to extract images from sbf thanks
Sent from my MB860 using Tapatalk
Probably no help to you, but you can root the stock UK Gingerbread.
Hi Guys,
I already successful downgrade to GB 2.3.6 (en.eu or asia retail) from ICS China. At first i get bootloop, but after flash GB radio from fastboot it works.
After downgrade n flash radio then I restore mmcblk1p18, then flash GB again, my problem is, I still get CustomerIDerror..... n still have to boot from bptools...n the worse is, mass storage function is missing. Yes i can connect to RSD but my Razr cannot be read by explorer.
What can I do guys?...how can i get my mass storage function work again?? please anyone help me...
-regards-
WeiiMyWay
weiimyway said:
Hi Guys,
I already successful downgrade to GB 2.3.6 (en.eu or asia retail) from ICS China. At first i get bootloop, but after flash GB radio from fastboot it works.
After downgrade n flash radio then I restore mmcblk1p18, then flash GB again, my problem is, I still get CustomerIDerror..... n still have to boot from bptools...n the worse is, mass storage function is missing. Yes i can connect to RSD but my Razr cannot be read by explorer.
What can I do guys?...how can i get my mass storage function work again?? please anyone help me...
-regards-
WeiiMyWay
Click to expand...
Click to collapse
simplest way should be reflashing 2.3.5 and then upgrading back to 2.3.6 ... 2.3.5 via RSD or Fla**** by EternityProject will perform a "full wipe" of your phone, so that every functionality should be restored.
greetings
is it okay?
Sh4itan said:
simplest way should be reflashing 2.3.5 and then upgrading back to 2.3.6 ... 2.3.5 via RSD or Fla**** by EternityProject will perform a "full wipe" of your phone, so that every functionality should be restored.
greetings
Click to expand...
Click to collapse
Tx for ur reply...
Which step is the best:
1. Flash 2.3.5 en.eu, then update 2.3.6 en.eu.zip.
2. Flash 2.3.5 en.eu, then flash 2.3.6 retail.asia.
since I only have 3 files right now, (2.3.5 en.eu sbf) (2.3.6 en.eu update.zip) & (2.3.6 retaila asia .sbf). OR should I download the real 2.3.6 en.eu .sbf/2.3.5 retail asia .sbf.
-regards-
WeiiMyWay
weiimyway said:
Tx for ur reply...
Which step is the best:
1. Flash 2.3.5 en.eu, then update 2.3.6 en.eu.zip.
2. Flash 2.3.5 en.eu, then flash 2.3.6 retail.asia.
since I only have 3 files right now, (2.3.5 en.eu sbf) (2.3.6 en.eu update.zip) & (2.3.6 retaila asia .sbf). OR should I download the real 2.3.6 en.eu .sbf/2.3.5 retail asia .sbf.
-regards-
WeiiMyWay
Click to expand...
Click to collapse
i don't know if it's possible to update an 2.3.5.retail.EN.EU to an 2.3.6.retail.ASIA (my opinion is it won't work), but the way it should work fine is the first. Do you need the asian one?
2.3.5 retail.asia.sbf
Sh4itan said:
i don't know if it's possible to update an 2.3.5.retail.EN.EU to an 2.3.6.retail.ASIA (my opinion is it won't work), but the way it should work fine is the first. Do you need the asian one?
Click to expand...
Click to collapse
I already try it, yes it is possible to update an 2.3.5 en.eu.sbf then flash 2.3.6 retail.asia.sbf. but from my experience it wont solve the problem.
maybe i should try to download 2.3.5 retail.asia.sbf. do you have one?
-regards-
WeiiMyWay
weiimyway said:
I already try it, yes it is possible to update an 2.3.5 en.eu.sbf then flash 2.3.6 retail.asia.sbf. but from my experience it wont solve the problem.
maybe i should try to download 2.3.5 retail.asia.sbf. do you have one?
-regards-
WeiiMyWay
Click to expand...
Click to collapse
have you downgraded like explained? or just flashed?
maybe just reupgrade to chinese ics and downgrade again?
weiimyway said:
I already try it, yes it is possible to update an 2.3.5 en.eu.sbf then flash 2.3.6 retail.asia.sbf. but from my experience it wont solve the problem.
maybe i should try to download 2.3.5 retail.asia.sbf. do you have one?
-regards-
WeiiMyWay
Click to expand...
Click to collapse
Root and reatore your own p18 backup .
Sent from my XT910 using Tapatalk 2
weiimyway said:
Hi Guys,
I already successful downgrade to GB 2.3.6 (en.eu or asia retail) from ICS China. At first i get bootloop, but after flash GB radio from fastboot it works.
After downgrade n flash radio then I restore mmcblk1p18, then flash GB again, my problem is, I still get CustomerIDerror..... n still have to boot from bptools...n the worse is, mass storage function is missing. Yes i can connect to RSD but my Razr cannot be read by explorer.
What can I do guys?...how can i get my mass storage function work again?? please anyone help me...
-regards-
WeiiMyWay
Click to expand...
Click to collapse
If you still get customer ID error you did not successfully restore mmcblk1p18 and this is the cause of your problems
Sent from my XT910 using XDA
weiimyway said:
Hi Guys,
After downgrade n flash radio then I restore mmcblk1p18, then flash GB again, my problem is, I still get CustomerIDerror..... n still have to boot from bptools...n the worse is, mass storage function is missing.
Click to expand...
Click to collapse
Well AFAIK if you still getting Customer ID error etc you should try to restore mmcblk1p18 once again. Pls use ConnectBot to restore the original file. If you're doing everything right you don't need to flash any firmware again. After the correct restoration you should be able to boot w/o BP Tools and have mass storage properly functioning. The most common mistakes are:
1. You haven't rooted via motofail before restoring mmcblk
2. You are using Terminal Emulator instead of ConnectBot (probably it is the reason)
3. You made a mistake during typing command in ConnectBot program. It should be as follows:
cat /sdcard-ext/mmcblk1p18-back> /dev/block/mmcblk1p18
my own mmcblk
thank you so much guys for ur reply...
until today i still get customerIDerror n lost mass storage function...
I already root with motofail, restore with connectbot, but the problem persist...
I need to know, is that mmcblk different on every device even they use the same ROM? and what size is mmcblk file is?
I ask because my very own mmcblk is 0 Byte size. is that mean that my backup failed? thats why i use mmcblk backup from my friend with the same ROM. the size ia 512kb....
If mmcblk is spesific for each device, is that mean i cant make it works?? is there any method to solve my problem?
-regards-
weiimyway
one more thing guys..how we know that we successful restore with connectbot?
is there appear any line that said "success" or what?
after I write the cat /sdcard....... and then enter, it doesnt say anything, just start a new blank line...is that correct??
Help confirm please...
Guys, anyone can confirm that mmcblk is specific to each device?
I mean is it true that mmcblk on every device is different even use the same ROM or radio?
Until now i cant make my mass storage function works or pass the customerIDerror....
I already done all the instruction you guys given to me, but none of it can make it works. what should i do now....?