is there a way to root the prime without usb connection. i have installed asus sync on 2 of my laptops, and on both i get a trouble massage when i connect the prime. he massage is that the last connected usb device causes a fallier on the usb port.I tried the sparkyroot app, but that came with a massage that "the exploiteble file not found" is. when i press unroot, it says that the root has been removed, but whene i recheck it still can't find the exploit.
I'm currently running original android 4.1.1 and the build-number is 10.4.2.18-20121122
Greats Robert
naze1975 said:
is there a way to root the prime without usb connection. i have installed asus sync on 2 of my laptops, and on both i get a trouble massage when i connect the prime. he massage is that the last connected usb device causes a fallier on the usb port.I tried the sparkyroot app, but that came with a massage that "the exploiteble file not found" is. when i press unroot, it says that the root has been removed, but whene i recheck it still can't find the exploit.
I'm currently running original android 4.1.1 and the build-number is 10.4.2.18-20121122
Greats Robert
Click to expand...
Click to collapse
Use the power USB cable direct to tablet not USB male to USB male.
pooblej said:
Use the power USB cable direct to tablet not USB male to USB male.
Click to expand...
Click to collapse
,
I have use the connector where you also charge the tablet with
no
Glebun said:
no
Click to expand...
Click to collapse
no, there is no way, or don't use that kable
there is no way
naze1975 said:
is there a way to root the prime without usb connection. i have installed asus sync on 2 of my laptops, and on both i get a trouble massage when i connect the prime. he massage is that the last connected usb device causes a fallier on the usb port.I tried the sparkyroot app, but that came with a massage that "the exploiteble file not found" is. when i press unroot, it says that the root has been removed, but whene i recheck it still can't find the exploit.
I'm currently running original android 4.1.1 and the build-number is 10.4.2.18-20121122
Greats Robert
Click to expand...
Click to collapse
Are you using the correct root method?
http://forum.xda-developers.com/showthread.php?t=2228613
pooblej said:
Are you using the correct root method?
http://forum.xda-developers.com/showthread.php?t=2228613
Click to expand...
Click to collapse
I had already tried that, but because of usb connection i can't use it. Thanks anyway
Related
usb connection and charging isn't possible.
So i opened the phone and replaced the charger port flex cable.
Still no connection to PC but charging is after a few tries on disabling usb debugging and reactivating is now possible. But connecting to the PC is even now impossible Maybe a firmware update solves the issue.
Is it possible to root via w-lan, bluetooth or SD-card?
i did nowhere find any solution
colbad said:
usb connection and charging isn't possible.
So i opened the phone and replaced the charger port flex cable.
Still no connection to PC but charging is after a few tries on disabling usb debugging and reactivating is now possible. But connecting to the PC is even now impossible Maybe a firmware update solves the issue.
Is it possible to root via w-lan, bluetooth or SD-card?
i did nowhere find any solution
Click to expand...
Click to collapse
No.
Make sure you've installed all of the necessary drivers. (Kies or the standalone driver pack)
i had 2 of this smartphones. Both factory reset. I know exactly how to root!
With the first one root was no problem. But the second one seems to be defective!
Didn't you read my message properly? there must be any solution how to root without usb!
Try something like this and push the su files manually.
https://market.android.com/details?id=com.ttxapps.wifiadb
Sent from my GT-I9100 using xda premium
i need for wifi adb root permission but i don't have root and my usb is broken as i mentioned above
No one any idea?
Morning all.
As of yesterday, my S2 won't connect to any pc in mass storage mode.
At first it connected as it should, but after about 5 minutes - before I'd transferred anything - I got a message that windows couldn't recognise the device/driver installation unsuccessful.
Since then I get this message immediately, have tried 4 different pcs.
Would seem the USB drivers are FUBAR somehow, but MTP via Kies works, as does Odin.
I've tried a full factory reset/reinstall, previous backups - stock and custom - removed, reinstalled and updated Kies, cleaned the USB port on the phone - nothing doing. Have tried stock kernels, Siyah, Nimphetamine - nothing. Currently on XWKL1, custom ROM (krinyo's SlimROM) with Siyah 2.6.3+
Also tried uninstalling various USB ports on my home pc, but stopped when I discovered it was the same on all pcs.
It's not the end of the world - I have bluetooth and my microSD - but it's a PITA and I'm out of ideas.
Many thanks for any help/suggestions.
Have you cheched if USB Debugging is enabled or not?
AzureusPT said:
Have you cheched if USB Debugging is enabled or not?
Click to expand...
Click to collapse
Yes, forgot to add that, sorry. Tried with and without, no difference.
Tried changing the usb cable?
From another post
Dear All
Following are my observations and possible steps to
1. When the phone is upgraded to Android 2.3.4 and above (mine is 2.3.6) Kies stops recognizing the phones and USB connection / Serial port connections etc get reset on the phone
2. Even if proper drivers are there on the laptop (mine is Windows 7 64bit) they are not recognized
3. Device Manager shows "unknown device"
4. Updating the driver also does not result in any help
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect (thanks to napi1 @ androidforums.com/samsung-galaxy-s2-international/447145-sgs2-kies-not-syncing-os-2-3-5-a.html#post3484588)
6. The Laptop will start recognizing the required drivers and install them
also
Click to expand...
Click to collapse
Maybe this can help
Getting a Service Mode FC when I enter that code in the keypad.
Will try it with an older backup.
Edit - tried it with a backup of CheckROM , 2.3.6. No FC, PDA already selected. Tried 5c above, still no good - unknown device on pc..
Lennyz1988 said:
Tried changing the usb cable?
Click to expand...
Click to collapse
No. Can't see that there's a problem there if Kies and Odin connect OK.
Lennyz1988 said:
Tried changing the usb cable?
Click to expand...
Click to collapse
B3311 said:
No. Can't see that there's a problem there if Kies and Odin connect OK.
Click to expand...
Click to collapse
Bugger me, it was the cable....
Bought a new S2 yesterday - nice to have a backup, and the Nexus is meh - and tried the new cable on old S2, everything fine. Old cable on new S2, no good for USB but fine for Kies and Odin as mentioned before.
No idea why it should be like this, but sh*t happens. Easiest solution is often the best!
same problem happened to me too
I have the exact same problem, tried everything like OP, even new cable still same issue...any ideas?
Red_Vex said:
From another post
Maybe this can help
Click to expand...
Click to collapse
Tried this..and it works! thanks alot man.
Red_Vex said:
From another post
Maybe this can help
Click to expand...
Click to collapse
Thanks buddy, that was very helpful
Hello,
Im trying to flash my phone but having a issue
So i have added the insecure kernel but when i try and do the next part (Run S2 Root) i get the following error
Device is not connected! Please connect the USB cables and try again
Im running the following
S2 Root 1.5.1
Android Version 2.3.6
Kernel Version I9100XWKJ2
Anyone able to help its annoying the hell out of me have tried different USB ports get the same issue
Make sure samsung drivers are installed, try different USB ports, check USB debugging in settings.
If it doesnt work again, try it with a different computer if possible.
Ok when i turn off USB debugging on the phone the PC will connect to it. When it is on it wont?
lowndes8 said:
Ok when i turn off USB debugging on the phone the PC will connect to it. When it is on it wont?
Click to expand...
Click to collapse
If its on, then leave it. I meant check that the USB debugging is on.
Where about do i check that?
lowndes8 said:
Where about do i check that?
Click to expand...
Click to collapse
Phone menu / settings / applications / development
And also make sure kies is not running on PC same time a Odin. Also ensure PC task manager has no kies processes
Sent from my GT-I9100 using xda premium
lowndes8 said:
Where about do i check that?
Click to expand...
Click to collapse
settings - applications- development
Yes that has been on the whole time.
As i said when this is on the deice wont connect
When its off it will connect??
lowndes8 said:
Yes that has been on the whole time.
As i said when this is on the deice wont connect
When its off it will connect??
Click to expand...
Click to collapse
That needs to be on, so the problem is elsewhere. Did you install samsung drivers, if you did, have you tried different USB ports?
I have downloaded the drivers and still not working
Still cant get it to work
Try this:
http://forum.xda-developers.com/showthread.php?p=18805560
Read the instructions carefully though.
No matter what I do I cannot get my Prime to get discovered by my PC. Tried un installing and re installing drivers/pc suite. Still nothing. Is there any trick to it? Trying to get it connected so I can get rooted and get JB up and running.
holmern said:
No matter what I do I cannot get my Prime to get discovered by my PC. Tried un installing and re installing drivers/pc suite. Still nothing. Is there any trick to it? Trying to get it connected so I can get rooted and get JB up and running.
Click to expand...
Click to collapse
you connect the cord to your prime and to your usb port and nothing at all happens at either end?
Yup. Nothing at all. Install led drivers multiple times and restored to factory defaults.
Sent from my GS3
its either bad cable, bad usb port on your computer, or your computer thinks it has the right driver and no further action is required.
Have you tried plugging it in to another computer?
Somehow it worked on the third computer I tried on. At least it's not the tablet then.. I think. Thanks for all the help!
holmern said:
Somehow it worked on the third computer I tried on. At least it's not the tablet then.. I think. Thanks for all the help!
Click to expand...
Click to collapse
could still be the usb cable then. You might want to order a backup just in case.
I juss got my Verizon Note 2, and was about to move some music and videos on it from my PC, but I ran into a strange issue. At first, when I plugged in my phone to my computer (Windows 8), Windows recognized the device, but no matter what mode I put it in, it never showed up in Windows Explorer. So, I tried downloading the Galaxy Note 2 Toolkit from XDA, but was unable to install it because it has yet to add support for the Verizon Note 2. So, I tried installing Kies, which installed my phone's driver, but won't actually recognize the device. When I look in Windows' device manager, I found the device was found under the name "SAMSUNG_Android", and had a yellow caution symbol next to it, and had the following text in the device status box:
This device cannot start. (Code 10)
{Operation Failed}
The requested operation was unsuccessful.
Click to expand...
Click to collapse
Any ideas on what to do?
P.S. I do have a 32GB microSD in the phone, in addition to the internal 16GB, but I have tried accessing the phone with and without the card installed.
lisalover1 said:
I juss got my Verizon Note 2, and was about to move some music and videos on it from my PC, but I ran into a strange issue. At first, when I plugged in my phone to my computer (Windows 8), Windows recognized the device, but no matter what mode I put it in, it never showed up in Windows Explorer. So, I tried downloading the Galaxy Note 2 Toolkit from XDA, but was unable to install it because it has yet to add support for the Verizon Note 2. So, I tried installing Kies, which installed my phone's driver, but won't actually recognize the device. When I look in Windows' device manager, I found the device was found under the name "SAMSUNG_Android", and had a yellow caution symbol next to it, and had the following text in the device status box:
Any ideas on what to do?
P.S. I do have a 32GB microSD in the phone, in addition to the internal 16GB, but I have tried accessing the phone with and without the card installed.
Click to expand...
Click to collapse
Try going into settings, about phone, tap build number 7 times, you are now a developer, back out to the main settings, go into developer options, enable usb debugging. Did that work?
drumdestroyer said:
Try going into settings, about phone, tap build number 7 times, you are now a developer, back out to the main settings, go into developer options, enable usb debugging. Did that work?
Click to expand...
Click to collapse
It was already enabled for some reason. Huh. Well, it's still not working.
I couldn't access my phone on my computer either it ended up being that I had to use the stock cable that came with the phone instead of the ones I bought off ebay
Sent from my SCH-I605 using Tapatalk 2
I'm having the same problem and neither the stock cable nor the cables from my GNex work. I have downloaded the Kies, deleted, re installed it numerous times with no luck. Also an aside, do the phones all come with a white cable and plug even when the phone is Gray?
Nevermind.
Make sure when you guys plug it into your pc that when you slide the notification bar down and it says conncected as installer you have to click that and check the box beside MTP. That solved my issue.
Sent From VZW Galaxy Note 2
Has anyone successfully gotten Kies to work? I'm on a MacBook Pro with no luck so far. Switched over to Windows and still no dice. So has Verizon just completely blocked us from using Kies???
I was having the same problem. I used the Toolkit option to install the Samsung drivers and restarted my computer, and it worked.
SwiftLegend said:
I was having the same problem. I used the Toolkit option to install the Samsung drivers and restarted my computer, and it worked.
Click to expand...
Click to collapse
What's the Toolkit Option?
i had the same problem and had to use the stock cable for it,other usb cables would only charge from the computer
fluidj said:
What's the Toolkit Option?
Click to expand...
Click to collapse
"Install Samsung Drivers" it's #1 I think.
s10sdeville said:
i had the same problem and had to use the stock cable for it,other usb cables would only charge from the computer
Click to expand...
Click to collapse
The stock cable is the only one I have and use.
---------- Post added at 08:09 PM ---------- Previous post was at 08:07 PM ----------
SwiftLegend said:
I was having the same problem. I used the Toolkit option to install the Samsung drivers and restarted my computer, and it worked.
Click to expand...
Click to collapse
Are you on a Mac or a PC?
PC
solution
hi guys
I found the solution using the code *#7284# on the dial pad (have no idea what the menue it leads to...)
there is a button (the very last one) USB settings
inside this menu check the MTP
after this manipulation I'm now able to see my phone on all computers I connect it to and no matter which cable I use
Thank You!!! Thank You!!!!
[/COLOR]
yokme said:
hi guys
I found the solution using the code *#7284# on the dial pad (have no idea what the menue it leads to...)
there is a button (the very last one) USB settings
inside this menu check the MTP
after this manipulation I'm now able to see my phone on all computers I connect it to and no matter which cable I use
Click to expand...
Click to collapse
Thank You Yokme!!! This worked for me. I have looked all over the web and this advice was the only thing that worked for me. God Bless You!!! :laugh:
yokme said:
hi guys
I found the solution using the code *#7284# on the dial pad (have no idea what the menue it leads to...)
there is a button (the very last one) USB settings
inside this menu check the MTP
after this manipulation I'm now able to see my phone on all computers I connect it to and no matter which cable I use
Click to expand...
Click to collapse
BRILLIANT! Just wasted an hour trying other options, this should be a sticky!
Rockin_Zombie said:
BRILLIANT! Just wasted an hour trying other options, this should be a sticky!
Click to expand...
Click to collapse
The code *#7248# isn't working for me. I type it into the dailer but nothing happens. Help?
manoosie said:
The code *#7248# isn't working for me. I type it into the dailer but nothing happens. Help?
Click to expand...
Click to collapse
Its 7284
Rockin_Zombie said:
Its 7284
Click to expand...
Click to collapse
Whoops sorry. I typed it wrong. Unfortunately, the right number still isn't working.