Recently i got a notification for OTA firmware for my I9100G. I guess it was JB update. After the update phone refused to start, it went into boot loop. I am trying to flash the stock rom ICS for India (I9100GXXLPQ_I9100GODDLP7_I9100GDDLP5_HOME.tar.md5) using Odin .
1. Initially I tried to flash custom ICS Kernel (SuperICS_i9100g_v1.0.2.tar) , then tried to wipe cache and wipe data/factory reset and wipe Dalvik cache. It says error mounting /sdcard/android.secure! .
2. After that I tried to flash the Stock firmware mentioned above after going into download mode but Odin fails every time after factoryfs.img or hidden.img
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> factoryfs.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Tried different stock firmwares and custom Kernels for GB,ICS and JB (all for G versions) , different USB ports, different ODIN versions too! Nothing helped
Also I disable Kies everytime while attempting to flash the firmware.
Phone is soft bricked.
Any help will be highly appreciated. Thanks in advance
Since you Necro-Posted an old thread, please do not open another with the same info. One or the other and in this case, it is the other.
Thread Closed
Related
Hello,
I'm in trouble. I have a SGS2 with stock 2.3.4 and did the cfroot a while ago and all went well.
Today I got a notice from KIES that an update was available, and so I started the update which failed.
After that my phone won't start at all and got stuck on the screen which said that I should use KIES recovery mode. I tried that but it didn't worked.
So I have tried to reflash with the cfroot, but that also didn't help.
So I wanted to reflash the stock rom as described here http://forum.xda-developers.com/showthread.php?t=1075278
but that's also giving me errors.
Odin doesn't even write the rom it gave me this:
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.bin
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/012> Removed!!
Can anyone help me please ?? I need the phone for my work
Best Regards,
Stefan.
tjempeng said:
Hello,
I'm in trouble. I have a SGS2 with stock 2.3.4 and did the cfroot a while ago and all went well.
Today I got a notice from KIES that an update was available, and so I started the update which failed.
After that my phone won't start at all and got stuck on the screen which said that I should use KIES recovery mode. I tried that but it didn't worked.
So I have tried to reflash with the cfroot, but that also didn't help.
So I wanted to reflash the stock rom as described here http://forum.xda-developers.com/showthread.php?t=1075278
but that's also giving me errors.
Odin doesn't even write the rom it gave me this:
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.bin
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/012> Removed!!
Can anyone help me please ?? I need the phone for my work
Best Regards,
Stefan.
Click to expand...
Click to collapse
Pull out the battery, reinsert the battery after 30 seconds, go in downloadmode (volume up + menu button + power button) and reflash the stock rom you need with Odin. Do NOT tick repartition or anything. You`ll find the stock rom here http://forum.xda-developers.com/showthread.php?t=1075278. Do NOT use a pit file. Flash the rom in PDA. Good luck
tjempeng said:
Hello,
I'm in trouble. I have a SGS2 with stock 2.3.4 and did the cfroot a while ago and all went well.
Today I got a notice from KIES that an update was available, and so I started the update which failed.
After that my phone won't start at all and got stuck on the screen which said that I should use KIES recovery mode. I tried that but it didn't worked.
So I have tried to reflash with the cfroot, but that also didn't help.
So I wanted to reflash the stock rom as described here http://forum.xda-developers.com/showthread.php?t=1075278
but that's also giving me errors.
Odin doesn't even write the rom it gave me this:
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> boot.bin
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/012> Removed!!
Can anyone help me please ?? I need the phone for my work
Best Regards,
Stefan.
Click to expand...
Click to collapse
Dear Stefan,
let me suggest:
1. Try to use another USB port.
2. Try to use another USB cable.
3. Try to boot into recovery mode (Volume UP + Home + Power, and hold the keys until the recovery menu appears), then choose factory reset and reboot.
4. Start Odin as Administrator and make sure that KIES (and no process of KIES) is running on your PC. Then try to flash the stock ROM again.
5. After flashing, try to boot into recovery mode (Volume UP + Home + Power, and hold the keys until the recovery menu appears), then choose factory reset and reboot.
Hope that it helps.
Good luck !
Solved !!!
YES !!!! IT WORKED !!!!!
I'm not sure which tip did the trick as I did all the things you both said and it worked !
I'm so happy !!!
YOU GUYS ROCK !!!!!
XDA is the best
So, I was attempting to root my Sprint Galaxy s3, using the CF-root 6.3 via Odin v1.85. All was going well, then just before the big finale, Odin crashes. Now my firmware is messed up on my new phone. I can get back into Downloading... mode, but if I try to re-flash with cf-root, I get this in Odin:
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> cache.img
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And this on the phone:
Unsupport dev_type.
And when I reboot:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Is my phone bricked? How can I undo this?
Thanks.
If this is in the wrong section, I apologize.
Did you try root your US sprint s3 with a method for the international s3?
If so then search because someone made that same mistake last night.
In future don't flash anything for the inter national version on your American version.
Sent from my GT-I9300 using xda premium
I seem to have fixed it. Used Odin to install the clockwork mod, and the phone boots up normally now. Close call.
Hi Devs,
I am stuck in a issue. I installed cm 12.0 (unofficial rom) to my Galaxy s3 GT-i9300 everything was working fine but suddenly it keeps on crashing randomly one day while calling my phone froze. I restarted the phone it stucked on SAMSUNG BOOT SCREEN.
I can go into download mode and recovery mode, currently using PhilzTouch 6 on recovery.
Things I have tried already.
Wiped Cache Partition
Wiped Data/Factory Reset
when i try to wipe cache or factory reset i get errors
E: can't mount /data or Formatting /sdcard/.android_secure
For some reason my phones internal memory is on the read only mode i tried to flash the stock rom as well so far no luck.
I tried 4 different stock roms none of them work they all stopped on nand write or setup connection
I followed the instruction below because thats what exactly happened to my phone but no luck when ever i try to load boot files into PDA it keeps failing.
http://forum.xda-developers.com/showthread.php?t=1840030
please guys i am tired and exhausted trying all different stuff guide me. I even tried PIT Files noting work. Thanks in advance
Try going back to stock/factory.
Boot in download mode (vol down+home+power).
Use Odin to flash stock recovery and firmware.
Once you are able to boot perfectly into touchwiz, can narrow down your points of failure and try again or try another ROM
blu88 said:
Try going back to stock/factory.
Boot in download mode (vol down+home+power).
Use Odin to flash stock recovery and firmware.
Once you are able to boot perfectly into touchwiz, can narrow down your points of failure and try again or try another ROM
Click to expand...
Click to collapse
Hi Blue,
Thanks for reply , so you meant to say i replace philztouch with stock recovery.
Correct me if i am wrong.
Replace philz with stock recovery and replace your rom with touchwiz. Figure out where you went wrong and then flash your custom rom again or flash a different custom rom.
Try flashing another recovery. Worked for me once
Thanks for Help
Can you send me link for GT-i9300 International Stock Recovery so i am installing exact thing it would be great help from you guys and i would really appreciate it.
blu88 said:
Replace philz with stock recovery and replace your rom with touchwiz. Figure out where you went wrong and then flash your custom rom again or flash a different custom rom.
Click to expand...
Click to collapse
Hi Blue i tried official recovery this what comes up and get fails
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
its problem with internal memory to read only is there any way to change it read write mod.
saqygee said:
Hi Blue i tried official recovery this what comes up and get fails
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
its problem with internal memory to read only is there any way to change it read write mod.
Click to expand...
Click to collapse
saqyee, you placed the stock recovery file in the PDA section right? DO NOT TOUCH THE PIT SECTION.
saqygee said:
Hi Blue i tried official recovery this what comes up and get fails
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
its problem with internal memory to read only is there any way to change it read write mod.
Click to expand...
Click to collapse
Nand write fail usually means emmc corrupt/damaged you could try the rescue firmware but this looks like hardware failure.
Sent from my LG-D855 using Tapatalk
Getting this error after trying to install a custom rom which didnt work , now trying to install the stock rom and in download mode , using odin 3.10.7 with the G925I firmware (from Australia however have had to download the indian international firmware)
odin keeps telling me its failed , is my phone stuffed or can I do something to get it back to the stock rom so I Can try a custom rom again?
Thanks in advance for the help!
<ID:0/006> Odin engine v(ID:3.1100)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Sboot.bin is bootloader. You are flashing a firmware with incorrect bootloader or old bootloader should i say.
Is your phone network locked?
http://www.sammobile.com/firmwares/download/107097/G925IDVS3EPJ6_G925IXSA3EPGG_XSA/
Try to flash this.
Was you rooted before you tried to flash custom rom?
perfect thanks mate , that rom worked and everythings good!
s3lkies said:
perfect thanks mate , that rom worked and everythings good!
Click to expand...
Click to collapse
No problem mate. If you are flashing a custom rom you need to root first and flash twrp. If you need help let me know mate
Very simple and hard for me at the same time
Flashed twrp on my galaxy s6edge 925f and that was the only thing i did so far, after 1st reboot it started up, but on second time i tryed to restart phone and wiped system (think ) becouse it ways i dont have os installed, it stuck at samsung logo, smartswtich neither kies recognizes my phone (yes drivers are installed) have downloaded stock firmware and tryed to flash it via odin, but..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed
ok with odin 3.12 i have this error
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can please anyone help me out?
managed somehow make it to work, cloes please
if you have samsung kies also installed on your comp it wont work....
I have this problem , can you explain how you fixed it?
aryaazimi72 said:
I have this problem , can you explain how you fixed it?
Click to expand...
Click to collapse
If you have sboot.bin fail this happens when you try to downgrade. Just flash stock firmware through odin. Use odin v3.10.6. Of it sticks on Samsung logo it's normal can take up to 20 minutes for first boot
callumbr1 said:
If you have sboot.bin fail this happens when you try to downgrade. Just flash stock firmware through odin. Use odin v3.10.6. Of it sticks on Samsung logo it's normal can take up to 20 minutes for first boot
Click to expand...
Click to collapse
I dont think i am downgrading... im flashing a bl from a new rom but i had an old rom before this...
I have these errors :
aryaazimi72 said:
I dont think i am downgrading... im flashing a bl from a new rom but i had an old rom before this...
I have these errors :
Click to expand...
Click to collapse
Which rom are you on? And which BL are you flashing?
callumbr1 said:
Which rom are you on? And which BL are you flashing?
Click to expand...
Click to collapse
i tried crisscross and xtrestolite...
now im downloading omega.. maybe that workes...
aryaazimi72 said:
i tried crisscross and xtrestolite...
now im downloading omega.. maybe that workes...
Click to expand...
Click to collapse
Crisscross development has stopped. I recommend CarHD rom it is the best by far.
Make sure your flashing the roms through twrp