Hi guys,
I not sure how am i going to do this so I hope you guys can help me out. Currently i am using PA 3.15 rom in my Samsung Galaxy GT-I9300 and i think my kernel is stock kernel. My recovery boot is Teamwin.
Please correct me if i am wrong, this is the way which i understand how to flash Siyah Kernel.
1. Download Siyah kernel and put into my phone.
2. Go to recovery boot
3. Wipe cache and dalvik cache
4. Install Siyah kernel
5. Reboot
That's it right? Do i miss anything and is my system support the latest siyah kernel which is SiyahKernel s3-v1.9.1?
Please advice!!
Thanks a lot!!
6GDominator said:
Hi guys,
I not sure how am i going to do this so I hope you guys can help me out. Currently i am using PA 3.15 rom in my Samsung Galaxy GT-I9300 and i think my kernel is stock kernel. My recovery boot is Teamwin.
Please correct me if i am wrong, this is the way which i understand how to flash Siyah Kernel.
1. Download Siyah kernel and put into my phone.
2. Go to recovery boot
3. Wipe cache and dalvik cache
4. Install Siyah kernel
5. Reboot
That's it right? Do i miss anything and is my system support the latest siyah kernel which is SiyahKernel s3-v1.9.1?
Please advice!!
Thanks a lot!!
Click to expand...
Click to collapse
If that's what the instructions say that is what you do .
It is the instructions is it that you flash a Zip through CWM recovery .
You really need to read the thread again .
http://forum.xda-developers.com/showpost.php?p=27385880&postcount=5
Siyah Kernel Discussion Thread
jje
That is correct. After you have booted back into your ROM, I'd suggest you installed STweaks from Play Store.
Otherwise, read both the development thread and the Q&A thread.
Happy flashing!
6GDominator said:
Hi guys,
I not sure how am i going to do this so I hope you guys can help me out. Currently i am using PA 3.15 rom in my Samsung Galaxy GT-I9300 and i think my kernel is stock kernel. My recovery boot is Teamwin.
Please correct me if i am wrong, this is the way which i understand how to flash Siyah Kernel.
1. Download Siyah kernel and put into my phone.
2. Go to recovery boot
3. Wipe cache and dalvik cache
4. Install Siyah kernel
5. Reboot
That's it right? Do i miss anything and is my system support the latest siyah kernel which is SiyahKernel s3-v1.9.1?
Please advice!!
Thanks a lot!!
Click to expand...
Click to collapse
Download Odin, download Siyah tar file (gokhanmoral.com), boot phone into download mode (Odin mode), open Odin on your pc, click PDA button, select Siyah tar file, hit start. Not hard, mate
CyanogenModded Very China-like, from my Samsung Galaxy S III
LG Familyguy59/Beatsleigher
Thanks a lot guys!! I just wondering how good is this latest Siyah Kernel's battery life performance. Any comments which this? I just noticed my phone draining its battery quite drastically. Maybe i have to do something using the STweak app? Undervolting?
6GDominator said:
Thanks a lot guys!! I just wondering how good is this latest Siyah Kernel's battery life performance. Any comments which this? I just noticed my phone draining its battery quite drastically. Maybe i have to do something using the STweak app? Undervolting?
Click to expand...
Click to collapse
Check my profile, and look for my latest post in the MIUI polimorph thread, there's a comment to the ROM and to battery life.
CyanogenModded Very China-like, from my Samsung Galaxy S III
LG Familyguy59/Beatsleigher
familyguy59 said:
Check my profile, and look for my latest post in the MIUI polimorph thread, there's a comment to the ROM and to battery life.
CyanogenModded Very China-like, from my Samsung Galaxy S III
LG Familyguy59/Beatsleigher
Click to expand...
Click to collapse
Thanks! I just want to stick with PA 3.15 a while and see how this kernel does with it. Regarding your results, you do it with maximum usage on data/wireless and i wonder how much time you spend on the 'on screen'?
6GDominator said:
Thanks! I just want to stick with PA 3.15 a while and see how this kernel does with it. Regarding your results, you do it with maximum usage on data/wireless and i wonder how much time you spend on the 'on screen'?
Click to expand...
Click to collapse
just undervolt for 75mv.. it'd probably help ya.. and for a lil more.. reduce JUST A LITTLE BIT of the GPU levels.. but my suggestion is try perseus kernel.. it's awesome with battery.. and got more stweaks than siyah :good:
hit thanks if you want to thank them
mense onviteA
BHARGAV33 said:
just undervolt for 75mv.. it'd probably help ya.. and for a lil more.. reduce JUST A LITTLE BIT of the GPU levels.. but my suggestion is try perseus kernel.. it's awesome with battery.. and got more stweaks than siyah :good:
Click to expand...
Click to collapse
I am using PA 3.15 ROM. Does Perseus Kernel works with this ROM?
Just got to know that Perseus Kernel doesn't support PA ROM.
Please correct me if i am wrong
Here is the link
http://forum.xda-developers.com/showthread.php?t=1691401
6GDominator said:
I am using PA 3.15 ROM. Does Perseus Kernel works with this ROM?
Just got to know that Perseus Kernel doesn't support PA ROM.
Please correct me if i am wrong
Here is the link
http://forum.xda-developers.com/showthread.php?t=1691401
Click to expand...
Click to collapse
Yup.
Sent from my GT-I9300 using xda premium
ravitomar said:
Yup.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks for confirming. Any other kernel can i use in this situation?
Siyah?
Glebun said:
Siyah?
Click to expand...
Click to collapse
I am using Siyah Kernel 1.9.1 (latest) now.
6GDominator said:
I am using PA 3.15 ROM. Does Perseus Kernel works with this ROM?
Just got to know that Perseus Kernel doesn't support PA ROM.
Please correct me if i am wrong
Here is the link
http://forum.xda-developers.com/showthread.php?t=1691401
Click to expand...
Click to collapse
Siyah is the only option for battery saving on paranoid..
Black Screen when flashing 1.9.1 with CM 10.1
JJEgan said:
If that's what the instructions say that is what you do .
It is the instructions is it that you flash a Zip through CWM recovery .
You really need to read the thread again .
http://forum.xda-developers.com/showpost.php?p=27385880&postcount=5
Siyah Kernel Discussion Thread
jje
Click to expand...
Click to collapse
I currently run Siyah 1.8.9 with CM 10.1 nightly (20130218), and I've tried to flash Siyah 1.9.1 with both Odin (PC) and through CM recovery. Both ways end up with a black screen after the Siyah logo. I've wiped cache and dalvik as well and fixed permissions. I'm not sure what the problem is. Am I missing something in stweaks setup?
thanks in advance.
BHARGAV33 said:
Siyah is the only option for battery saving on paranoid..
Click to expand...
Click to collapse
I actually find Devil kernel (built from perseus sources) much better for battery saving on paranoid android. Its still in its infancy though. Feels faster too
Sent from my GT-I9300 using Tapatalk 2
tylerharms said:
I currently run Siyah 1.8.9 with CM 10.1 nightly (20130218), and I've tried to flash Siyah 1.9.1 with both Odin (PC) and through CM recovery. Both ways end up with a black screen after the Siyah logo. I've wiped cache and dalvik as well and fixed permissions. I'm not sure what the problem is. Am I missing something in stweaks setup?
thanks in advance.
Click to expand...
Click to collapse
I think you need to flash the latest nightly with factory reset.
Sent from my GT-I9300 using xda app-developers app
Related
Hello,
i just bought a new i9100. Currently it has sensation rom 3.4 and siyah v 3.1 kernel. Now i want to flash hydrgen ics rom. How do I flash that rom ?
Follow the instructions for flashing that particular rom in the thread in the dev section devoted to that rom.
MistahBungle said:
Follow the instructions for flashing that particular rom in the thread in the dev section devoted to that rom.
Click to expand...
Click to collapse
Actually I am new to android so dont know much. I should just go into recovery and flash it straight forward? Or I would need to change kernel too?
I've never used that particular rom, so I have absolutely no idea. As I said in my previous post, go to the thread devoted to the rom & read the instructions (read the entire first page).
hassaan123 said:
Actually I am new to android so dont know much. I should just go into recovery and flash it straight forward? Or I would need to change kernel too?
Click to expand...
Click to collapse
first go into recovery mode and wipe everything factory reset and cache late format data format cache and last thing wipe dalvik cache and later on you can install your new rom. you dont have to change kernel because rom has its kernel in it.
how did u get on sensation with siyah kernel...??????
hassaan123 said:
Hello,
i just bought a new i9100. Currently it has sensation rom 3.4 and siyah v 3.1 kernel. Now i want to flash hydrgen ics rom. How do I flash that rom ?
Click to expand...
Click to collapse
Brand new I9100, Came with Sensation rom & Siyah kernel. Does Samsung know about this.
Sent from my GT-I9100 using Tapatalk 2
bored_stupid said:
Brand new I9100, Came with Sensation rom & Siyah kernel. Does Samsung know about this.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I bought used phone from someone
Switch ur cell off and power on holding Down power key, volume up and home button.U'll boot into CWM.that will do the magic
Sent from my GT-I9100 using XDA
And siyah works well with hydra and hydrogen both.u can try them both
Sent from my GT-I9100 using XDA
I was on supernexus I777 build 4, before upgrading to build 5 I wiped everything and also did format system kernelcleaner script was also used, then first installed siyah 4.3.3 for I777 then installed build 5 and then gapps and then reboot phone boots up siyah screen loads and then phone goes dark waited for 1/2 hour nothing happens reinstalled 3 times same problem also did reset after install same problem what should I do now.
Sent from my SGH-I777 using xda app-developers app
lingarajug said:
I was on supernexus I777 build 4, before upgrading to build 5 I wiped everything and also did format system kernelcleaner script was also used, then first installed siyah 4.3.3 for I777 then installed build 5 and then gapps and then reboot phone boots up siyah screen loads and then phone goes dark waited for 1/2 hour nothing happens reinstalled 3 times same problem also did reset after install same problem what should I do now.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Are you using the right siyah?
Bleh
Sounds like the ROM doesn't have the Mali updates. It will work without Siyah, or you can use a non-mali version of Siyah.
korockinout13 said:
Sounds like the ROM doesn't have the Mali updates. It will work without Siyah, or you can use a non-mali version of Siyah.
Click to expand...
Click to collapse
It does have mali
Doesn't matter what version of kernel you use from my understanding... (as long as it's for this phone)
Flashing the ROM, via CWM, will overwrite whatever kernel is installed with its own kernel.
Something is wrong, true. But I don't believe it to be Siyah or SuperNexus.
Have you tried re-downloading SuperNexus and flashing the new dl? You may have had a bad dl.
Oh, and if I'm wrong about anything, please correct me. Always willing to learn!
Clay
Team Pirate
Sent from my PINK GSwagger2
And the logcat says?
Sent from Arkham
0. Complete wipe of course.
1.Flash supernexus build 5 + gapps.
2.Reboot, Let it boot up once atleast.
3.Boot into recovery
4. wipe, dalvik cache
5. flash siyah.
6. Reboot
thank you everyone, I'm tired to see my phone go blank again, I read some posts saying siyah gives better battery life than the kernel included in the ROM, which was the reason I wanted to try it, I have tried siyah with older supernexus ROM and currently using built in kernel and notice no difference, I guess I should try it before asking it here, thanks again everyone for ur support.
Sent from my SGH-I777 using xda app-developers app
4.3.3 nomswap??
I have an at&t gs2 i777 and I'm currently on SuperNexus build 2 with Siyah-v4.1.5-nomswap. I want to upgrade to supernexus build5 with siyah 4.3.3. The only thing I'm confused with is that I don't see anymore any download for nomswap for JB.
Download v4.3.3 - CM10/AOKP MALI - CWM Flashable
WITH mic swap
Download v4.3.3 - ICS
WITH mic swap
WITHOUT mic swap
Which one should I install??
Thnks!!
t7reyeslua said:
I have an at&t gs2 i777 and I'm currently on SuperNexus build 2 with Siyah-v4.1.5-nomswap. I want to upgrade to supernexus build5 with siyah 4.3.3. The only thing I'm confused with is that I don't see anymore any download for nomswap for JB.
Download v4.3.3 - CM10/AOKP MALI - CWM Flashable
WITH mic swap
Download v4.3.3 - ICS
WITH mic swap
WITHOUT mic swap
Which one should I install??
Thnks!!
Click to expand...
Click to collapse
You need mswap on all JB roms...
Thanks
122ninjas said:
You need mswap on all JB roms...
Click to expand...
Click to collapse
Wow! Thanks a lot for the quick response! I'll take your word ...I had doubts because when I installed supernexus build2 (JB) I got confused first and installed siyah with mic swap and couldn't hear anything during calls...so I changed it to nomswap and everything ran smoothly...so now that I wanted to install siyah 4.3.3 i was surprised there was no nomswap.
This is my first Android and I love the Supernexus/Siyah Combo!!
t7reyeslua said:
Wow! Thanks a lot for the quick response! I'll take your word ...I had doubts because when I installed supernexus build2 (JB) I got confused first and installed siyah with mic swap and couldn't hear anything during calls...so I changed it to nomswap and everything ran smoothly...so now that I wanted to install siyah 4.3.3 i was surprised there was no nomswap.
This is my first Android and I love the Supernexus/Siyah Combo!!
Click to expand...
Click to collapse
Mswap and noMswap effects people hearing you not you hearing them
Just installed siyah kernel 1.7 on my sgs3 but i would like to play around with the dual booting features but the siyah recovery is no where to be seen, ive installed it via odin and cwm but the recovery never changes! What am i doing wrong?
hunter2k said:
Just installed siyah kernel 1.7 on my sgs3 but i would like to play around with the dual booting features but the siyah recovery is no where to be seen, ive installed it via odin and cwm but the recovery never changes! What am i doing wrong?
Click to expand...
Click to collapse
Siyah recovery does not overwrite your current recovery
The only way to access Siyah recovery is in STweaks app (Dualboot section)
well ive had siyah running on my s2 for ages so how come its changed between devices? Tbh i miss the nice theme as well lol
I9300's recovery is not integrated in the kernel
It has separate partitions.
Your first recovery will stick.
Gokhan added an option in STweaks to access the true Siyah recovery. This is the only way to get to it.
hunter2k said:
Just installed siyah kernel 1.7 on my sgs3 but i would like to play around with the dual booting features but the siyah recovery is no where to be seen, ive installed it via odin and cwm but the recovery never changes! What am i doing wrong?
Click to expand...
Click to collapse
Siyah 1.7b1 and b2 included the recovery. Gokhanmoral removed it from b3 and later kernels.
I have the b2 kernel if you want. If Gokhanmoral does not mind, I'll share it here, so others who want Siyah recovery can install it.
You can flash rc1 after flashing it. You'll retain Siyah recovery.
Sent from my GT-I9300 using xda app-developers app
Oomahey said:
Siyah 1.7b1 and b2 included the recovery. Gokhanmoral removed it from b3 and later kernels.
I have the b2 kernel if you want. If Gokhanmoral does not mind, I'll share it here, so others who want Siyah recovery can install it.
You can flash rc1 after flashing it. You'll retain Siyah recovery.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Please do! I always use Siyah, and really miss the recovery.
majickal said:
Please do! I always use Siyah, and really miss the recovery.
Click to expand...
Click to collapse
Yes i would also appreciate it!
There is a link to download the recovery on this page;
http://forum.xda-developers.com/showthread.php?t=1623525&page=1837
Just flash it in odin.
Sent from my GT-I9300 using xda premium
Somebody has a separate file recovery from Siyah 1.7?
Alex 136 said:
Somebody has a separate file recovery from Siyah 1.7?
Click to expand...
Click to collapse
I think this is what you are looking for.Check the attachment.
hi im using jb cm10 4.2 rom and the CWM is not touch, how do I put the touch CWM on so it works for my rom
thanks
pitbull123 said:
hi im using jb cm10 4.2 rom and the CWM is not touch, how do I put the touch CWM on so it works for my rom
thanks
Click to expand...
Click to collapse
u can use Siyah or Dorimanx kernel's which come with the latest 'CWM touch' recovery
Sun90 said:
u can use Siyah or Dorimanx kernel's which come with the latest 'CWM touch' recovery
Click to expand...
Click to collapse
is the battery life good with Siyah, which is best one??
pitbull123 said:
is the battery life good with Siyah, which is best one??
Click to expand...
Click to collapse
Both are good with lots of customization thro 'Stweaks' app that comes along with those kernels
I have flashed paranoidandroid 3.15 on my galaxy s3 a couple weeks ago, aside the occasional screen that win't turn on I haven't had any problem, but I set my mind on flashing a new kernel in order to be able to change thez governor. I tried to flash air kernel on, I did exactly what I was told: Boot into recovery, clear cache/delvik, installed kernel from sd card, and rebooted. But after the phone being rebooted, I still had the stock kernel.
My question is, why did this happen, and how do I fix it?
All help is appreciated
what recovery? link to the kernel?
Glebun said:
what recovery? link to the kernel?
Click to expand...
Click to collapse
I'm running TWRP ( Team Win Recovery Project)
http://forum.xda-developers.com/showthread.php?t=1469842 link to the kernel, although if you know any kernels that work better/ more appropriate for ParanoidAndroid, I am more than open to suggestions
vonniel said:
I'm running TWRP ( Team Win Recovery Project)
http://forum.xda-developers.com/showthread.php?t=1469842 link to the kernel, although if you know any kernels that work better/ more appropriate for ParanoidAndroid, I am more than open to suggestions
Click to expand...
Click to collapse
Kernel is for nexus s not galaxy s3
Sent from my GT-I9300 using xda premium
wow, you're lucky the updater-script saved your phone. Flashing wrong firmware will kill it
Glenbun. Only mismatched, corrupted, or missing boot loaders can kill a phone.
yeah-yeah, but we should scare the noobs away from flashing the wrong firmware that potentially includes a bootloader
Glebun said:
yeah-yeah, but we should scare the noobs away from flashing the wrong firmware that potentially includes a bootloader
Click to expand...
Click to collapse
Glebun u have a point, even other incompatible components of recovery zip packages can brick the phone.
Sent from my Supercharged V12 Samsung Galaxy S3 using Tapatalk
Glebun said:
wow, you're lucky the updater-script saved your phone. Flashing wrong firmware will kill it
Click to expand...
Click to collapse
Wow, I feel so dumb ^^' I'll be more careful next time around.
What kernel would you recommend for me?
I recommed stock mb5 or speedmod k2-12 kernels for you
Bahadirafro said:
I recommed stock mb5 or speedmod k2-12 kernels for you
Click to expand...
Click to collapse
Well, I don't really know either of them, I don't mind stock, but I want to change things, sometimes it just isn't up for the task, or uses up battery when I would rather it didn't, without even knowing what they do, and looking around, I found the perseus kernel, I would like some opinions on the kernel, I would be very grateful if you told me if it fits me, if it's compatible with ParanoidAndroid, and finally if you have a better suggestion for a kernel.
http://forum.xda-developers.com/showthread.php?t=1691401
read the first post of the thread to find out if it's compatible with your ROM.
and try it to see if it suits you
If I'm running TWRP can I still download kernels that say they are meant for CWM?
yes