I have 2 HTC One's and here is what I can report
Here are the differences based on build serial numbers:
Build serial # HT343W
Slight gap on the top
The screen is slightly raised where it meets the top speaker
The screen is slightly recessed where it meets the bottom speaker
Volume rocker buttons are slightly raised
Power button is almost flush
Home and back menu buttons light up and are bright
Deep black colors
Build serial # HT34FW
Slight gap on the top
Screen is flush as it should be on the top
Screen is slightly recessed where it meets the bottom speaker
Volume up is flush and volume down is slightly raised
Power button is slightly raised
Home and back menu buttons are VERY dim
Brownish blacks. Not as deep as the HT343W build
Text appears slightly crisper but slightly smaller
Please do NOT turn this into a complaining thread or another gap gate (rolleyes) type thread.
This is simply to compare the build qualities between the devices.
You can check this thread to decipher the build information of your device.
http://forum.xda-developers.com/showpost.php?p=39623665&postcount=1
Not to start anything but isn't this the exact same information we looking for on the other thread?
This thread is more like a OCD party.
Sent from my HTC One using xda app-developers app
Related
[Q] Tactile stickers/decals for non-illuminated standards "android" buttons?
Hello,
I find it really annoying that I can't feel or see the standard four "android" buttons at night. Has anyone found aftermarket stickers or decals that I can place over the buttons to provide some tactile feedback in the dark? I can't find anything like this anywhere.
Thanks
I like the idea of some type of vinyl decal or something. Put that on and then put a screen protector on top of it maybe... Anyway, seems like someone would make something.
I also like the idea of making them backlit.
Other people have dealt with this various ways including glueing stuff to the android buttons.
And another person superglued some tubing to the side of the tablet...
http://forum.xda-developers.com/showthread.php?t=948313
And someone else used glow in the dark puffy paint...
http://forum.xda-developers.com/showpost.php?p=12306949&postcount=9
I wish there was a mod to add some kind of LED underneath.
Or install button savior. Not as convenient, but very easy to use.
I'm using TnT Lite and it has soft buttons on the screen, which definitely are convenient. I was mainly wanting this for the tactile feel.
If we were to scratch the paint off of the back if the buttons and then punch a little hole in the seal around the screen maybe that would allow enough light to bleed through to light em up.
but what would I know. Haven't even got mine yet. :'(
Sent from my Desire HD using XDA Premium App
I was at Office Max tonight and I picked up some clear hole reinforcements. These are the little sticky rings you put on paper when the punch hole has torn out but you want them to stay in the binder. Turns out they are just the right size to go over the buttons and cheap so you can mess up and put them on many times over.
The button labels are a little to the right of center. From a foot away you can't see the rings at all (probably even less if I had cleaned the tablet good before sticking them on). And you can "feel" the buttons very easily. Now on the other hand, feeling them can push them if you aren't careful. Running your finger up the screen edge (not the device edge) seems to work best.
Cheap to try and simple to reverse if you don't like it.
that idea looks like a winner to me, unless someone is making glow in the dark stickers resembling those icons
I was in a computer store the other day and saw "glow in the dark" keyboard stickers. They were in a few florescent looking colors.
Not cheap, but I was in a mood to spend money so I bought them. I figured an arrow key on the back button, the "Home" button on the home key and then use two generic keys for Menu and search.
Unfortunately, they don't really glow in the dark! They "catch" light off the monitor the keyboard is sitting in front of. Of course, on the tablets on a plane the monitor is shooting the light in the right direction. So if there is any ambient light you can see them. But if you really are in the dark, nada.
Also they look kind of tacky. Part of that is that I'm not artistic and so I didn't get them as lined up as someone crafty would. But even then they look tacky. On top of that I am now afraid to give it a good spray with cleaner. So I think they are coming off but thought I'd take a picture first.
The clear hole stickers I mentioned earlier are not very useful either because you have to "feel" them and if you feel the buttons you've pressed them so too late.
By the way the picture also shows a Skinomi screen protector on. Crystal clear except for one blemish on the far left side off the visible part of the screen
Picture is a little fuzzy but you get the idea.
http://www.myglowkeys.com/
Of course, I didn't read the FAQ online in the store (smart phone, duh). It clearly says there that they don't really glow. You'd think the packaging would have to reflect that.
My solution was to take a razor blade and make an ever so slight cut into the plastic bordering the screen. I made two, one next to the home button and one next to the back button. Now when I need to find a button in the dark I just slide my thumb down the side and feel for the nick in the plastic. The "damage" to the plastic is imperceptible and it doesn't limit the cases I can use down the line (the way gluing those buttons on the side would).
wd5gnr said:
The clear hole stickers I mentioned earlier are not very useful either because you have to "feel" them and if you feel the buttons you've pressed them so too late.
Click to expand...
Click to collapse
Why not stick them on the side next to the buttons instead over the buttons ?
Why not just get the glow in the dark stars package?
LEDs backlight for the Android keys
cobrast6 said:
I wish there was a mod to add some kind of LED underneath.
Click to expand...
Click to collapse
A user here modded his Gtablet (which is now my Gtablet) to include LED backlighting.
His write-up on the mod is here:
http://forum.xda-developers.com/showthread.php?t=899132&highlight=LEDs
- Michael
Button Savior placement
I've been pleased with using Button Savior, not for it's buttons, but for it's placement. I position it in line with the menu button, which makes it very easy to know where the Home, Menu, and Back are. Free and clean, though I do sometimes inadvertently trigger the Button Savior menu.
I would prefer a way to disable these buttons because i am always touch the search button by accident
adam714 said:
I would prefer a way to disable these buttons because i am always touch the search button by accident
Click to expand...
Click to collapse
Search Button Remapper on market.
My SGS2 screen tilts SLIGHTLY to the right. Once I started to notice this I see this every time I use the phone, and it's getting very annoying.
Is someone else experiencing the same problem? Is this something you would send the phone in to service because of?
Can you provide a photo of your phone showing the problem?
I know of no software issue that causes this (there is a Google Egg that hangs the phone screen output slightly to the right).
It sounds like you could have a hardware screen issue but it would have to be showing on all screens, be that the Home screen or when running any Apps/Games.
I don't know if you can see it. If you look at the bottom of the screen it might be noticeable to you. It's the same way in every screen, so I think it's a hardware problem. It tilts slightly to the right.
Sorry, I can't see any tilt from that photo.
I also measured the angle of the bottom edge of the screen and the Home button.
They are both in alignment with each other.
When the screen is switched off you should see the outlining edge of the display.
Now when you switch on the screen does it fit to this?
It seems to be that to whole frame is is a BIT crooked. I don't know how I can show this accurately when it doesn't show that much.
Are you sure it's not your eyes deceiving you?
Try taking a few more shots (close in at the bottom) and then load the shots up on your PC and look closer...... Try and measure the angle against say the bottom of the phone to see if there is any discrepancy.
Quasar83 said:
I don't know if you can see it. If you look at the bottom of the screen it might be noticeable to you. It's the same way in every screen, so I think it's a hardware problem. It tilts slightly to the right.
Click to expand...
Click to collapse
I've been staring at the photo for like one minute now. And I don't see it. Maybe if you go closer with the camera?
I can see it the top leans to the right, like the frame is not correct. defo faulty
Out of curiosity, has anyone tried using a ruler? Or a measuring tape (like the free paper ones you get at Ikea if you are afraid of scratching it).
I just did a measurement of my screen to the edge of the outside bezel... Starting from bottom to top..
Bottom from both corners of the screen to the outside bottom bezel: 1.55cm +/- 0.025cm
Bottom of both sides of screen to the outside bezel: 0.45cm +/- 0.025cm
Top of both sides of screen to the outside bezel: 0.45cm +/- 0.025cm
Top from both corners of the screen to the outside top bezel: 1.55cm +/- 0.025cm
Never knew this before, but the screen is dead center of the phone..
I also took a measurement of the diagonal: 4 1/4" or 10.25cm +/- 0.025cm
Height: 9.30cm +/- 0.025cm (both sides)
width: 5.55cm +/- 0.025cm (top & bottom)
My Galaxy S II is perfectly aligned.. I do admit though, after you said it, I felt it was crooked... That's why I ended up taking the above measurements --
I've noticed that on my phone the distance between the screen and the bezel is not even all the way around the phone. It looks like in the top right and top left the screen is deeper than the bottom. At the same time the screen in the bottom left is higher than the rest of the phone. The screen doesn't appear to be loose, so I doubt this will ever be an issue, but I was wondering what exactly causes this. I've checked out a few phones from different stores this seems to vary between phone to phone. I have seen a few that are more or less even all the way around while I have seen others like mine. Between the ones I have seen with the varying distance, the bottom left corner seems to always be higher than the rest.
That's been reported on. Seems quality checks vary a bit. No one has posted any problems resulting from it. Most phone cases cover the difference.
Sent from my páhhōniē
I am not talking about the space between the bezel and the screen horizontally, I am talking vertically. The bottom left corner looks like the glue didn't stick properly causing it to become unstuck. If I press on the screen in that area there is a noticeable sound like when your fingers have something sticky on them and you put them together and take them apart. However, this sound might be created due to the fact that that corner is where the speaker is and the plastic is weaker because of the holes.
JaRay said:
I am not talking about the space between the bezel and the screen horizontally, I am talking vertically. The bottom left corner looks like the glue didn't stick properly causing it to become unstuck. If I press on the screen in that area there is a noticeable sound like when your fingers have something sticky on them and you put them together and take them apart. However, this sound might be created due to the fact that that corner is where the speaker is and the plastic is weaker because of the holes.
Click to expand...
Click to collapse
Mine makes the same noise and I don't have a raised area of the screen in the bottom left corner...
JaRay said:
I am not talking about the space between the bezel and the screen horizontally, I am talking vertically. The bottom left corner looks like the glue didn't stick properly causing it to become unstuck. If I press on the screen in that area there is a noticeable sound like when your fingers have something sticky on them and you put them together and take them apart. However, this sound might be created due to the fact that that corner is where the speaker is and the plastic is weaker because of the holes.
Click to expand...
Click to collapse
Haven't heard much about it making a noise when you press on it, but a number have posted about your issue. Seems it's always the bottom and either the right or left side being higher. No one has yet posted about both being higher, at least not yet.
Samsung screens are attached to the phone by an adhesive tape/pad. So it would be possible that some bad batches went out allowing the screen to lift. All Samsung phones come with a one year warranty. You'll be without a phone but you can send it in to get fixed if it bothers you enough or gets worse.
If you go to their website you can register your phone and they will extend the warranty a little bit. I think at least a month longer.
Sent from my páhhōniē
Situation:
1)Tablet docked into keyboard.
2) Just after turning into sleep (using power button).
3) Sometimes while sleeping as well
What:
The power button makes an almost silent squealing sound.
Sorry for double posting but it is driving me insane. The ultra high pitch sound I think comes from this round thing in the corner (speaker/beeper/mic whatever it is)
It is located in the bottom right corner of the backplate when You look at a horizontally oriented Asus in the middle. The whole backplate seems to be producing the sound, it is however more load near the right edge of the backplate
Here are some photos of Nexus 10 with backcover removed, you can see the screen is fused inside a frame along with digitiser and gorilla glass, the screws you see is for holding the battery and have no effect on the extent of light bleed.
awesome pictures!
Hm.. Have you tried to turn on the tablet with open cover just to see of the light bleed is still there ?
So I wonder...does it just all snap together during the manufacturing process? If the only screws are for the battery then what is holding the screen assembly to the frame? I hope its not the frame itself causing all the problems...that could take Samsung while to fix if at all :/
davidmclaren said:
Hm.. Have you tried to turn on the tablet with open cover just to see of the light bleed is still there ?
Click to expand...
Click to collapse
still there
atg284 said:
So I wonder...does it just all snap together during the manufacturing process? If the only screws are for the battery then what is holding the screen assembly to the frame? I hope its not the frame itself causing all the problems...that could take Samsung while to fix if at all :/
Click to expand...
Click to collapse
i guess they are glued together
great photos
have you tried to press at some points to see if the lightbleed changes?
after some speculation i think the backlight on the N10s is set to high
i know that my old Samsung TV looked terrible when using max backlight.
as i dont have any N10 yet (picking it up on friday) im not sure if the brightness slider changes the backlight or the brightness(black level)?
my teory is that the backlight is set at max all the time and you only change the brightness.
thats plain WRONG!
thats why colors looks washed out when increasing the brightness
what you want is also a slider for the backlight
the brightness(black level) should ALLWAYS be the same
if you want a brighter display you should only change the backlight as the backlight doesnt affect colors/black level or gamma.
backlight only increase the white level.
you dont want to change your gamma right?
so hackers and kernel experts
find a way to change the backlight and most of the problems should be gone
i think
also you need to replace or add a slider with backlight setting instead of the brightness slider
I
263629749 said:
i guess they are glued together
Click to expand...
Click to collapse
I suspect a thin strip of double sided foam tape. Glue aren't typically used on screens as they create fumes which can haze the screen. Atleast not when we install touchscreens for ATM machines. Double sided tapes are easier to apply also. Same process as screen protectors where you have 3 layers with the center being the actual film. In this case center is the double sided tape. Peel one side, put it on the screen then peel off the other side to expose the other sticky side then lay the screen down on the glass. When its not on perfectly is when I suspect light bleed happens.
The huge problem is trying to remove it once its on. You can use heat to try to separate them. With ATM screens they're thicker so somewhat easier to pull them apart as you heat them but with newer phones or tablets they're so thin that if you do this they'll easily crack.
IMO if the light bleed is bugging you just exchange it rather than risk cracking the screen. Then you'll end up completely voiding your warranty exchange
Sent from my SGH-T999 using Tapatalk 2
Here's a complete tear down. There's no mention of any sketchiness in the way it's put together or components used.
Today we received and promptly disassembled the Google Nexus 10. In usual fashion we’ll release the take apart video next week, but wanted to go ahead and post the preliminary take apart steps and photos. The model we’ve taken apart is the 16GB Wi-FI model. Model # GT-P8110.
One thing that struck us about this disassembly was the complete ease of taking this tablet apart. Whereas Apple seems to be making it more and more difficult to repair devices by combining parts and using as much glue as possible, Google seems to be taking the complete opposite approach. The end result is a device that is extremely repairable. Go Google!
Another interesting note is how many of the components in the device are manufactured by Samsung. It appears that the battery, processor, and flash memory are all made by Samsung. Is this Google’s way of capitalizing on the drift between Apple and Samsung?
That’s it. The Nexus 10 display and digitizer are fused together, so that is where the take apart ends.
http://www.powerbookmedic.com/wordpress/2012/11/16/google-nexus-10-take-apart-first-look
that cable that says "GT-P8110" is very interesting. Might help with Samsung support reps in trying to identify what the device is
http://www.samsung.com/us/support/owners/product/GT-P8110HAEXAR
Edit: Hmm, just looked at my N10 box and it has the number as well; not sure how I missed that before.
pg_ice said:
great photos
have you tried to press at some points to see if the lightbleed changes?
after some speculation i think the backlight on the N10s is set to high
i know that my old Samsung TV looked terrible when using max backlight.
as i dont have any N10 yet (picking it up on friday) im not sure if the brightness slider changes the backlight or the brightness(black level)?
my teory is that the backlight is set at max all the time and you only change the brightness.
thats plain WRONG!
thats why colors looks washed out when increasing the brightness
what you want is also a slider for the backlight
the brightness(black level) should ALLWAYS be the same
if you want a brighter display you should only change the backlight as the backlight doesnt affect colors/black level or gamma.
backlight only increase the white level.
you dont want to change your gamma right?
so hackers and kernel experts
find a way to change the backlight and most of the problems should be gone
i think
also you need to replace or add a slider with backlight setting instead of the brightness slider
Click to expand...
Click to collapse
its usually the back light led whose brightness is changed thats y u save battery life when u reduce brightness, what ur talking about is the contrast and thats fixed on the tablet, brightness being led light intensity and contrast being each pixel allowing amount of light through it
ok time to get this tablet perfect
i have some slight lightbleed at the bottom right corner as many has.
if i press at the back of the screen at the right corner i can clearly see that the lightbleed gets worse.
so the conclusion is that is has something to do with uneven pressure at the screen when you can affect it with pressure from the back.
i report back how it went and if i found some solution
A little bit off topic here, in regards to thermal throttling, do you think it would be possible to fit a small blower some where up top where the cpu/gpu is located?
Something like this (16mmx16mmx4.5mm):
http://www.digikey.com/scripts/dkse...ewproducts=0&ptm=0&fid=0&quantity=0&PV46=5197
It would need to be hooked up to 5V, some where like the USB or HDMI port connections on the inside or on the board.
It looks like there is a small hole underneath the camera in the lid that could act as an exhaust, a very restricted one, and the usb/hdmi/3.5mm ports may help intake and exhaust too.