Hi, I'm a new poster here and I ran into a problem on my archos 101 g9. All I want is to root so I tried this tutorial..[TUT] How to Install Official SDE menu and rooted firmware (updated 19 Nov 2012) and during the set up I think I messed up somewhere and now I'm stuck at a screen where it says " SDE Installed will now reboot" and it has that pegasus thing sittin. It will blink for about good 15 sec. and goes back to that screen again. I hope I didnt messed it up for good. I just need to get it back to factory settings and I'll try to root again.
I have the same problem so if someone has a solution, I am interested.
Edit : It's okay I managed to get out of that by myself
Related
Hello everyone, I follow you for a while but I had already done recording ...
My name is Gennaro, I have a problem with the tosbib folio 100 after installing the new update I was able to install the toshiba foliomod 1.4 x HDMI a few days it worked and then went not so I tried to put back the original by a Roma factory reset before installing it but it is not successful, now when I turn on the tablet I get a black screen and after Chermiti toshiba ...
Does anyone know how I can fix?
Thanks!
I forgot when I try to install the original update the progress bar does not move after a while it smooths ...
Sorry for my English I use google translator
Before Christmas I tried to do a OTA update on my Prime, which has not been successful and I have not been able to use the Prime since.
It has previously been rooted and previously have always been successful in using Voodoo OTA Rootkeeper to retain root after updates. I've not unlocked the Prime.
Now when I try to boot it spends a while 'optimizing' the applications (as if it was the first time i've booted it since the update), and then once it is started, no apps will startup, all of them resulting in saying "unfortunately xyz has stopped"
A video of the problem: youtu.be/e1yfTtGiR78 (sorry can't post full link as am a new user).
I'd like to get it working again, possibly installing the Androwook ROM (or at the very least, just working on the stock rom). What steps do I need to do from where I am at the moment?
There are many threads about flashing roms, brick-fixing (some more up to date than others), but I'd just like a bit of advice about this problem and what I should do next (maybe some good links?). I haven’t gone near doing any flashing on the Prime, and it would be nice to seperate the things I could do, from the things I -should- do (I don't know where to start).
I believe as the Nvidida logo is on the bottom right this means I'm on the JB bootloader? Currently the settings menu shows I'm on android 4.1.1, but not sure if this is pre or post the failed update.
Thanks for any help,
Steve
A factory reset will fix you up. You'll lose your data
Hold vol down + power when booting to access the boatloader menu. Select wipe with vol down and use vol up to confirm.
Hi,
Thanks, I've done the reset, but I still seem to have the same problem.
imageshack.us/photo/my-images/502/imag0217c.jpg
I can't actually proceed throuh the inital set up, because it closes itself when it gets to the account setup page.
Any ideas?
I have resolved this.
I downloaded the latest firmware from the ASUS support website, extracted the zip file from within the downloaded zip file and renamed it to EP201_SDUPDATE.ZIP .
Put this on a microSD card (which I had formatted to FAT32), inserted it into the Prime, then booted into the bootloader menu.
Selected the RCK option, it did the update, and 10 minutes later it was up and running again.
From what I have read, it won't try to complete the update if it thinks you have already got that version installed already, but I guess it knew it hadn't successfully completed the update previously.
Glad it's working again.
Hello,
recently I downloaded a Glamour S4 and installed it. Also I downloaded, what is propably obvious, CWM. I used it for some time, but didn't like bacause of many bugs and limitations. I tried to download other rom, Project Chaos, but what is driving me crazy I couldn't download it from mega.co.nz becauze it freezes all the time on 66 or 90%. So after two days of trying to download and having this issue I decided to go back to original. I did everything as in this thread http://forum.xda-developers.com/showthread.php?t=2323847 but after finishing I realized that the software is branded by one of operators here in Poland, and it was freezing too long (about 30 minutes and samsung logo stayed still).
Fortunetly I had my backup from CWM. So what I did then was:
Installed CWM
backed up software
Installed original recovery
Set binary counter to default
Then I figured that root is still on my phone, so I choosed option in SU to fully unroot
Voila! Soft is smooth and as it was orginally. Status is original. Everything as it was before I changed any software, except one thing - I cannot check if there is a new update. I have internet connection, can access websites through wifi or mobile data etc., but when I check if there is new software, phone only shows "checking if there is new software" and progress bar, and it stays for 5, 10, 30... 60 minutes even, and nothing is happening...
It is annoying cause I wanted to back to fully original and wait for the official update, but right now something is wrong... Do anyone know, why?
Cheers!
Adam.st said:
Hello,
recently I downloaded a Glamour S4 and installed it. Also I downloaded, what is propably obvious, CWM. I used it for some time, but didn't like bacause of many bugs and limitations. I tried to download other rom, Project Chaos, but what is driving me crazy I couldn't download it from mega.co.nz becauze it freezes all the time on 66 or 90%. So after two days of trying to download and having this issue I decided to go back to original. I did everything as in this thread http://forum.xda-developers.com/showthread.php?t=2323847 but after finishing I realized that the software is branded by one of operators here in Poland, and it was freezing too long (about 30 minutes and samsung logo stayed still).
Fortunetly I had my backup from CWM. So what I did then was:
Installed CWM
backed up software
Installed original recovery
Set binary counter to default
Then I figured that root is still on my phone, so I choosed option in SU to fully unroot
Voila! Soft is smooth and as it was orginally. Status is original. Everything as it was before I changed any software, except one thing - I cannot check if there is a new update. I have internet connection, can access websites through wifi or mobile data etc., but when I check if there is new software, phone only shows "checking if there is new software" and progress bar, and it stays for 5, 10, 30... 60 minutes even, and nothing is happening...
It is annoying cause I wanted to back to fully original and wait for the official update, but right now something is wrong... Do anyone know, why?
Cheers!
Click to expand...
Click to collapse
You will need to flash a stock ROM with odin use: SAMSUNG GALAXY S3 UNIFIED TOOLKIT
Hello everyone,
Here is my problem of which I hope you can help me out.
I own a Allwinner A13 7 inch tablet, on which I installed the Cyanogen 10 mod (Due to restrictions I cannot place the link to the mod)
The problem is I probably installed the wrong touchscreen driver, so the tablet boots perfectly into the Mod but I can't do anything.
Normally it would be no problem to just put back my backup, but I can't get it to boot into CWM.
In the first place I rebooted into CWM to instal the mod by adding the following command through the "terminal app" before rebooting,
Command: "echo -e 'boot-recovery\0' > /dev/block/nandf; sync"
Now I cannot use the screen so i cant use the terminal.
I also cannot use ADB because USB debugging is standard switched of after flashing a new MOD.
Does anyone know if there is another way to get into CWM??
Thanks a LOT!
Thanks a lot!
I will have a look
Do you by change know where to get a working stock rom? I flashed one which i found using google a couple of times but it only results in a Boot loop (I have no luck at all!).
Thanks!
Update: found a stock version that works. But no my touchscreen is inverted.
Also I probably made another **** up, because I accepted the format option of Livesuit, so now I lost my backup.....
Hello!
My dad was using Nokia 7.1 for a while but recently he asked for help with his phone which is constanlty restarting... Looking into other threads, I can see it is kind of known problem, so I hope you can help me somehow. The phone is running now on 00WW_3_51F. He doesn't remember what was recently done with the phone but I guess he simply updated it do Android 9.0... When I power on the phone, it boots correctly but restarts after few seconds (sometimes it's longer, up to 1 minute).
- I have already reseted phone to factory default but problem remained.
- I have tried to boot it in safe mode but same problem occurred.
I managed to access Settings>Advanced>Updates and noticed that there is an update available (V3.54H) with size 1299.4 MB. When I started to download it, phone crashed...
I was able to download V3.54H OTA from another thread in this forum with size 119MB (pretty weird...) and I am wondering if there is any chance to update it manually from SD Card or Fastboot. Assuming there is V3.51F version installed, can I simply execute command fastboot update update.zip in fastboot? Will it install only this patch to exisiting OS or replace it?
Do you have any other ideas how to fix it?
Thanks!