So out of nowhere today my DNA just starts rebooting constantly over and over and over when booting roms. It's getting faster and faster with reboots, wont even get 3 seconds into the boot animation. I've flashed 3 different known working roms that I've flashed in the past that were on my SDCard. I can get into bootloader and recovery, can factory reset/wipe fine.
I managed to get a logcat, but the thing I don't get is why it's rebooting the same way on different roms with different kernels.
Here's the best logcat I was able to retrieve. Any help would be great.
From what I am able to see it looks like it's rebooting on temp errors. This makes me wonder if it's a kernel issue or if it's a hardware issue.
Code:
E/HtcBootAnimation( 433): sqlite3_open error, sqlite result: 14, errno: 2, No such file or directory
D/libc ( 207): pt_debug : pthread_create->start_routine=0x404a8509, tls=0x41b1df00, arg=0x40997588
D/libc ( 207): pt_debug : __thread_entry->func=0x404a8509
D/libc ( 207): , tls=0x41b1df00, arg=0x40997588
D/libc ( 208): pt_debug : pthread_create->start_routine=0x4052a509, tls=0x41b7ef00, arg=0x41d71128
D/libc ( 208): pt_debug : __thread_entry->func=0x4052a509
D/libc ( 208): , tls=0x41b7ef00, arg=0x41d71128
D/libc ( 208): pt_debug : pthread_create->start_routine=0x4052a509, tls=0x41cc5f00, arg=0x41d712c8
D/libc ( 208): pt_debug : __thread_entry->func=0x4052a509
D/libc ( 208): , tls=0x41cc5f00, arg=0x41d712c8
W/MediaPlayer( 208): info/warning (1, 902)
D/libc ( 208): pt_debug : pthread_create->start_routine=0x40c9de41, tls=0x41e71f00, arg=0x41d6f53c
D/libc ( 208): pt_debug : __thread_entry->func=0x40c9de41
D/libc ( 208): , tls=0x41e71f00, arg=0x41d6f53c
I/Adreno200-EGL( 433): <qeglDrvAPI_eglInitialize:294>: EGL 1.4 QUALCOMM build: (Merge)
I/Adreno200-EGL( 433): Build Date: 12/09/12 Sun
I/Adreno200-EGL( 433): Local Branch: case_1021867
I/Adreno200-EGL( 433): Remote Branch:
I/Adreno200-EGL( 433): Local Patches:
I/Adreno200-EGL( 433): Reconstruct Branch:
E/Trace ( 433): error opening trace file: No such file or directory (2)
D/libc ( 433): pt_debug : pthread_create->start_routine=0x401e7e95, tls=0x41084f00, arg=0x414b6ff0
D/libc ( 433): pt_debug : __thread_entry->func=0x401e7e95
D/libc ( 433): , tls=0x41084f00, arg=0x414b6ff0
D/memalloc( 197): ion: Allocated buffer base:0x466cf000 size:8355840 fd:36
D/memalloc( 197): ion: Allocated buffer base:0x46f5c000 size:4096 fd:38
D/memalloc( 433): ion: Mapped buffer base:0x414f7000 size:8355840 offset:0 fd:23
D/memalloc( 433): ion: Mapped buffer base:0x40058000 size:4096 offset:0 fd:25
D/libc ( 208): pt_debug : pthread_create->start_routine=0x4052a509, tls=0x41f71f00, arg=0x400e7058
D/libc ( 208): pt_debug : pthread_create->start_routine=0x4052a509, tls=0x42094f00, arg=0x400e7390
D/libc ( 208): pt_debug : __thread_entry->func=0x4052a509
D/libc ( 208): , tls=0x42094f00, arg=0x400e7390
D/libc ( 208): pt_debug : __thread_entry->func=0x4052a509
D/libc ( 208): , tls=0x41f71f00, arg=0x400e7058
W/MediaPlayer( 208): info/warning (1, 902)
D/libc ( 208): pt_debug : pthread_create->start_routine=0x4052a509, tls=0x42370f00, arg=0x400f1f28
D/libc ( 208): pt_debug : __thread_entry->func=0x4052a509
D/libc ( 208): , tls=0x42370f00, arg=0x400f1f28
D/libc ( 208): pt_debug : pthread_create->start_routine=0x4052a509, tls=0x42503f00, arg=0x400f1fb0
D/libc ( 208): pt_debug : __thread_entry->func=0x4052a509
D/libc ( 208): , tls=0x42503f00, arg=0x400f1fb0
E/ ( 208): [ACDB RTC]->rtc init done!->result [0]
E/ ( 208): actp_diag_init: call diag init function with 409476F5
E/ ( 208): Diag_LSM_Init: Failed to open handle to diag driver, error = 13
E/ ( 208): actp_diag_init: diag init failed
E/ ( 208): [ACDB ACPH]->actp diag init done!
E/ACDB-LOADER( 208): Error opening MBHC file 2
E/ACDB-LOADER( 208): Error opening anc file 2
D/memalloc( 197): ion: Allocated buffer base:0x46f7e000 size:8355840 fd:41
D/memalloc( 197): ion: Allocated buffer base:0x477ba000 size:4096 fd:42
D/memalloc( 433): ion: Mapped buffer base:0x44b4e000 size:8355840 offset:0 fd:28
D/memalloc( 433): ion: Mapped buffer base:0x453ce000 size:4096 offset:0 fd:30
D/libc ( 197): pt_debug : pthread_create->start_routine=0x400f4509, tls=0x47998f00, arg=0x4552dda8
D/libc ( 197): pt_debug : __thread_entry->func=0x400f4509
D/libc ( 197): , tls=0x47998f00, arg=0x4552dda8
D/memalloc( 197): ion: Allocated buffer base:0x47a21000 size:8355840 fd:45
D/memalloc( 197): ion: Allocated buffer base:0x482a0000 size:4096 fd:48
D/memalloc( 433): ion: Mapped buffer base:0x4740e000 size:8355840 offset:0 fd:32
D/memalloc( 433): ion: Mapped buffer base:0x47c88000 size:4096 offset:0 fd:34
E/kickstart-htc( 199): mycat: fopen /vendor/firmware//dev/block/mmcblk0p30 failed! Error 2: No such file or directory
D/libc ( 208): pt_debug : pthread_create->start_routine=0x423837b0, tls=0x4271ef00, arg=0x4032a6f0
D/libc ( 208): pt_debug : __thread_entry->func=0x423837b0
D/libc ( 208): , tls=0x4271ef00, arg=0x4032a6f0
E/alsa_ucm( 208): Invalid current verb value: Inactive - -1
E/alsa_ucm( 208): No valid device Speaker found
E/kickstart( 495): Requested ID 21, file "/vendor/firmware/sbl1.mbn"
E/ACDB-LOADER( 208): Error: ACDB AFE returned = -8
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor0' - alarm raised 1 at 55.0 degC
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor7' - alarm raised 3 at 66.0 degC
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor7' - alarm raised 2 at 66.0 degC
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor7' - alarm raised 1 at 66.0 degC
E/ThermalDaemon( 198): ACTION: CPU - Setting CPU[0] to 1026000
E/ThermalDaemon( 198): notify PnPMgr CPU0 frequency limit to 1026000(temp reaches 66.0 degC)
E/ThermalDaemon( 198): ACTION: CPU - Setting CPU[1] to 1026000
E/ThermalDaemon( 198): notify PnPMgr CPU1 frequency limit to 1026000(temp reaches 66.0 degC)
E/ThermalDaemon( 198): ACTION: HOTPLUG CPU 1 critical failsafe cleared - Sensor 'tsens_tz_sensor8' - temperature 67, mpdecision_active 0
E/ThermalDaemon( 198): ACTION: CPU - Setting CPU[2] to 1026000
E/ThermalDaemon( 198): notify PnPMgr CPU2 frequency limit to 1026000(temp reaches 66.0 degC)
E/ThermalDaemon( 198): ACTION: CPU - Setting CPU[3] to 1026000
E/ThermalDaemon( 198): notify PnPMgr CPU3 frequency limit to 1026000(temp reaches 66.0 degC)
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor8' - alarm raised 3 at 67.0 degC
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor8' - alarm raised 2 at 67.0 degC
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor8' - alarm raised 1 at 67.0 degC
E/ThermalDaemon( 198): ACTION: HOTPLUG CPU 3 critical failsafe cleared - Sensor 'tsens_tz_sensor10' - temperature 59, mpdecision_active 0
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor10' - alarm raised 1 at 59.0 degC
E/ThermalDaemon( 198): ACTION: HOTPLUG CPU 2 critical failsafe cleared - Sensor 'tsens_tz_sensor9' - temperature 59, mpdecision_active 0
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor9' - alarm raised 1 at 59.0 degC
E/kickstart( 495): 117492 bytes transferred in 0.015s (7.39 MBps)
E/kickstart( 495): Requested ID 23, file "/vendor/firmware/rpm.mbn"
E/kickstart( 495): 106124 bytes transferred in 0.018s (5.68 MBps)
E/kickstart( 495): Requested ID 22, file "/vendor/firmware/sbl2.mbn"
E/kickstart( 495): 241852 bytes transferred in 0.027s (8.63 MBps)
E/kickstart( 495): Requested ID 12, file "/vendor/firmware/dsp2.mbn"
E/HTC Acoustic( 208): @@##loadSpeakerFile /data/audio/tcoefA.speaker size 0x0 NOT match!!
E/HTC Acoustic( 208): @@##loadSpeakerFile /etc/tfa/tcoef.speaker fopen NULL,No such file or directory
E/HTC Acoustic( 208): @@## line 1266: Status = 0x885f, mtp:0x1, systcl:0x25c
E/ThermalDaemon( 198): ACTION: HOTPLUG CPU 1 critical failsafe cleared - Sensor 'tsens_tz_sensor8' - temperature 61, mpdecision_active 0
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor8' - alarm cleared 3 at 61.0 degC
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor7' - alarm cleared 3 at 59.0 degC
E/ThermalDaemon( 198): ACTION: CPU - Setting CPU[0] to 1134000
E/ThermalDaemon( 198): notify PnPMgr CPU0 frequency limit to 1134000(temp reaches 59.0 degC)
E/ThermalDaemon( 198): ACTION: CPU - Setting CPU[1] to 1134000
E/ThermalDaemon( 198): notify PnPMgr CPU1 frequency limit to 1134000(temp reaches 59.0 degC)
E/ThermalDaemon( 198): ACTION: CPU - Setting CPU[2] to 1134000
E/ThermalDaemon( 198): ACTION: HOTPLUG CPU 3 critical failsafe cleared - Sensor 'tsens_tz_sensor10' - temperature 62, mpdecision_active 0
E/ThermalDaemon( 198): notify PnPMgr CPU2 frequency limit to 1134000(temp reaches 59.0 degC)
E/ThermalDaemon( 198): ACTION: CPU - Setting CPU[3] to 1134000
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor10' - alarm raised 2 at 62.0 degC
E/ThermalDaemon( 198): notify PnPMgr CPU3 frequency limit to 1134000(temp reaches 59.0 degC)
E/ThermalDaemon( 198): ACTION: HOTPLUG CPU 2 critical failsafe cleared - Sensor 'tsens_tz_sensor9' - temperature 65, mpdecision_active 0
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor9' - alarm raised 3 at 65.0 degC
E/ThermalDaemon( 198): Sensor 'tsens_tz_sensor9' - alarm raised 2 at 65.0 degC
E/ThermalDaemon( 198): ACTION: CPU - Setting CPU[0] to 1026000
E/ThermalDaemon( 198): notify PnPMgr CPU0 frequency limit to 1026000(temp reaches 65.0 degC)
E/ThermalDaemon( 198): ACTION: CPU - Setting CPU[1] to 1026000
E/ThermalDaemon( 198): notify PnPMgr CPU1 frequency limit to 1026000(temp reaches 65.0 degC)
E/ThermalDaemon( 198): ACTION: CPU - Setting CPU[2] to 1026000
E/ThermalDaemon( 198): notify PnPMgr CPU2 frequency limit to 1026000(temp reaches 65.0 degC)
E/ThermalDaemon( 198): ACTION: CPU - Setting CPU[3] to 1026000
E/ThermalDaemon( 198): notify PnPMgr CPU3 frequency limit to 1026000(temp reaches 65.0 degC)
full logcat attached
yutsoku said:
So out of nowhere today my DNA just starts rebooting constantly over and over and over when booting roms. It's getting faster and faster with reboots, wont even get 3 seconds into the boot animation. I've flashed 3 different known working roms that I've flashed in the past that were on my SDCard. I can get into bootloader and recovery, can factory reset/wipe fine.
I managed to get a logcat, but the thing I don't get is why it's rebooting the same way on different roms with different kernels.
Here's the best logcat I was able to retrieve. Any help would be great.
From what I am able to see it looks like it's rebooting on temp errors. This makes me wonder if it's a kernel issue or if it's a hardware issue.
full logcat attached
Click to expand...
Click to collapse
Have you tried flashing a stock kernel? It looks like your phone is getting hot which might be related to an overclocked kernel.
Related
I am trying to port SEMC Debrand Engine to Galaxy FIt using clean CM7 as base
So far it boots and then bootloops.
Logcat:
Code:
--------- beginning of /dev/log/main
I/cm ( 112): Welcome to Android 2.3.7 / Achotjan's_SEMC-Debrand-engine_v3
I/cm ( 113): _
I/cm ( 114): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 115): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
I/cm ( 116): )) _))
I/cm ( 117):
I/DEBUG ( 151): debuggerd: Jan 1 2013 02:59:43
--------- beginning of /dev/log/system
I/Vold ( 149): Vold 2.1 (the revenge) firing up
I/Netd ( 150): Netd 1.0 starting
D/Vold ( 149): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 149): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
D/Vold ( 149): Volume sdcard state changing 2 (Pending) -> 1 (Idle-Unmounted)
D/AndroidRuntime( 153):
D/AndroidRuntime( 153): >>>>>> AndroidRuntime START com.android.internal.os.ZygoteInit <<<<<<
I/AndroidRuntime( 153): Heap size: -Xmx32m
D/AndroidRuntime( 153): CheckJNI is OFF
I/ ( 154): ServiceManager: 0xad50
I/AudioHardwareMSM72XX( 154): get_audpp_filter
I/AudioHardwareMSM72XX( 154): open /system/etc/AudioFilter.csv success.
I/AudioHardwareMSM72XX( 154): EQ flag = 00.
I/AudioHardwareMSM72XX( 154): EQ flag = 00.
I/AudioHardwareMSM72XX( 154): EQ flag = 00.
D/AudioHardwareInterface( 154): setMode(NORMAL)
I/AudioHardwareMSM72XX( 154): Set master volume to 7.
I/QualcommCameraHardware( 154): getCameraInfo: IN
I/QualcommCameraHardware( 154): getCameraInfo: loading libqcamera at 0xb000e0e8
I/QualcommCameraHardware( 154): getCameraInfo: numOfCameras = 1
I/QualcommCameraHardware( 154): Camera sensor 0 info:
I/QualcommCameraHardware( 154): camera_id: 0
I/QualcommCameraHardware( 154): modes_supported: 1
I/QualcommCameraHardware( 154): position: 0
I/QualcommCameraHardware( 154): sensor_mount_angle: 90
V/QualcommCameraHardware( 154): getCameraInfo: dlclose(libqcamera)
I/QualcommCameraHardware( 154): getCameraInfo: OUT
D/AudioFlinger( 154): setParameters(): io 1, keyvalue routing=2, tid 216, calling tid 154
I/AudioFlinger( 154): AudioFlinger's thread 0xcc68 ready to run
I/AudioHardwareMSM72XX( 154): Routing audio to Speakerphone
D/AudioHardwareMSM72XX( 154): doAudioRouteOrMute() device 6, mMode 0, mMicMute 1, mBuiltinMicSelected 0, muted
I/AudioHardwareMSM72XX( 154): Routing audio to Speakerphone
D/AudioHardwareMSM72XX( 154): setVoiceVolume(1.000000)
I/AudioHardwareMSM72XX( 154): Setting in-call volume to 7 (available range is 0 to 7)
I/SamplingProfilerIntegration( 153): Profiler is disabled.
I/Zygote ( 153): Preloading classes...
E/Zygote ( 153): setreuid() failed. errno: 2
D/dalvikvm( 153): GC_EXPLICIT freed 48K, 77% free 239K/1024K, external 0K/0K, paused 4ms
I/bluetooth_ScoSocket.cpp( 153): Entry name = MY-CAR ScoTypes = 0x7f
I/bluetooth_ScoSocket.cpp( 153): Entry name = Motorola HF850 ScoTypes = 0x7
D/szipinf ( 153): Initializing inflate state
D/dalvikvm( 153): GC_FOR_MALLOC freed 2914K, 57% free 2209K/5123K, external 0K/0K, paused 75ms
D/dalvikvm( 153): GC_FOR_MALLOC freed 2634K, 52% free 2485K/5123K, external 0K/0K, paused 68ms
I/Zygote ( 153): ...preloaded 1829 classes in 5841ms.
D/Zygote ( 153): setreuid() error ignored, same uid.
D/dalvikvm( 153): GC_EXPLICIT freed 887K, 48% free 2685K/5123K, external 0K/0K, paused 55ms
I/Zygote ( 153): Preload resources disabled, skipped.
D/dalvikvm( 153): GC_EXPLICIT freed 25K, 49% free 2660K/5123K, external 0K/0K, paused 45ms
D/dalvikvm( 153): GC_EXPLICIT freed <1K, 49% free 2660K/5123K, external 0K/0K, paused 44ms
D/dalvikvm( 153): GC_EXPLICIT freed <1K, 49% free 2660K/5123K, external 0K/0K, paused 44ms
I/dalvikvm( 153): System server process 254 has been created
I/Zygote ( 153): Accepting command socket connections
I/sysproc ( 254): Entered system_init()
I/sysproc ( 254): ServiceManager: 0xbed50
I/SurfaceFlinger( 254): SurfaceFlinger is starting
I/SurfaceFlinger( 254): dithering enabled
I/SurfaceFlinger( 254): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
E/SurfaceFlinger( 254): Couldn't open /sys/power/wait_for_fb_sleep or /sys/power/wait_for_fb_wake
I/msm7k.gralloc( 254): using (fd=27)
I/msm7k.gralloc( 254): id = msmfb30_30001
I/msm7k.gralloc( 254): xres = 240 px
I/msm7k.gralloc( 254): yres = 320 px
I/msm7k.gralloc( 254): xres_virtual = 240 px
I/msm7k.gralloc( 254): yres_virtual = 640 px
I/msm7k.gralloc( 254): bpp = 32
I/msm7k.gralloc( 254): r = 24:8
I/msm7k.gralloc( 254): g = 16:8
I/msm7k.gralloc( 254): b = 8:8
I/msm7k.gralloc( 254): width = 38 mm (160.421051 dpi)
I/msm7k.gralloc( 254): height = 51 mm (159.372543 dpi)
I/msm7k.gralloc( 254): refresh rate = 1.34 Hz
D/libEGL ( 254): loaded /system/lib/egl/libGLES_android.so
D/libEGL ( 254): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 254): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 254): loaded /system/lib/egl/libGLESv2_adreno200.so
E/libEGL ( 254): eglSetSwapRectangleANDROID:1909 error 3008 (EGL_BAD_DISPLAY)
I/SurfaceFlinger( 254): EGL informations:
I/SurfaceFlinger( 254): # of configs : 35
I/SurfaceFlinger( 254): vendor : Android
I/SurfaceFlinger( 254): version : 1.4 Android META-EGL
I/SurfaceFlinger( 254): extensions: EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_ANDROID_image_native_buffer EGL_ANDROID_swap_rectangle EGL_ANDROID_get_render_buffer
I/SurfaceFlinger( 254): Client API: OpenGL ES
I/SurfaceFlinger( 254): EGLSurface: 8-8-8-8, config=0x3
I/SurfaceFlinger( 254): OpenGL informations:
I/SurfaceFlinger( 254): vendor : Qualcomm
I/SurfaceFlinger( 254): renderer : Adreno (TM) 200
I/SurfaceFlinger( 254): version : OpenGL ES-CM 1.1
I/SurfaceFlinger( 254): extensions: GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_APPLE_texture_2D_limited_npot GL_EXT_texture_filter_anisotropic GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_OES_blend_equation_separate GL_OES_blend_func_separate GL_OES_blend_subtract GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_depth_texture GL_OES_draw_texture GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_framebuffer_object GL_OES_matrix_palette GL_OES_packed_depth_stencil GL_OES_point_size_array GL_OES_point_sprite GL_OES_read_format GL_OES_rgb8_rgba8 GL_OES_stencil_wrap GL_OES_texture_cube_map GL_OES_texture_env_crossbar GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_texture_mirrored_repeat GL_QCOM_binning_control GL_QCOM_extended_get GL_QCOM_tiled_rendering GL_AMD_compressed_3DC_texture
I/SurfaceFlinger( 254): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 254): GL_MAX_VIEWPORT_DIMS = 4096
I/SurfaceFlinger( 254): flags = 00000000
D/SensorService( 254): nuSensorService starting...
E/bdaddr ( 271): Error reading /data/.nvmac_bt.info (unexpected size 18)
E/SensorHAL( 254): __poll_init
E/SensorHAL( 254): +__poll_activate: handle=0 enabled=0
E/SensorHAL( 254): +__poll_activate: handle=1 enabled=0
E/SensorHAL( 254): +__poll_activate: handle=2 enabled=0
E/SensorHAL( 254): +__poll_activate: handle=3 enabled=0
I/SensorService( 254): BMA220
I/SensorService( 254): MMC314X
I/SensorService( 254): Mag & Acc Combo Orientation Sensor
I/SensorService( 254): TAOS
I/sysproc ( 254): System server: starting Android runtime.
I/sysproc ( 254): System server: starting Android services.
I/SystemServer( 254): Entered the Android system server!
D/SensorService( 254): nuSensorService thread starting...
I/sysproc ( 254): System server: entering thread pool.
I/SystemServer( 254): Entropy Service
I/SystemServer( 254): Power Manager
I/SystemServer( 254): Activity Manager
I/ActivityManager( 254): Memory class: 32
D/libEGL ( 270): loaded /system/lib/egl/libGLES_android.so
D/libEGL ( 270): loaded /system/lib/egl/libEGL_adreno200.so
W/UsageStats( 254): Usage stats version changed; dropping
D/libEGL ( 270): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 270): loaded /system/lib/egl/libGLESv2_adreno200.so
E/SurfaceFlinger( 254): eglSwapBuffers: EGL error 0x3008 (EGL_BAD_DISPLAY)
W/zipro ( 270): Unable to open zip '/data/local/bootanimation.zip': No such file or directory
HELP ME PLEASE!
PS. Full logcat http://pastebin.com/wxcMd6Nz
Thanx in Advance!
Logcat shows lot of Sony Ericsson specific libraries and files are missing and because of the dependency, it's throwing error and restarting framework again and again. Why are you trying to use something Sony Ericsson on a Samsung phone?
ivoidwarranty said:
Logcat shows lot of Sony Ericsson specific libraries and files are missing and because of the dependency, it's throwing error and restarting framework again and again. Why are you trying to use something Sony Ericsson on a Samsung phone?
Click to expand...
Click to collapse
Here it is running on Galaxy Y:
http://forum.xda-developers.com/showthread.php?t=1979146
and
Here is original thread (It is CM7, modded to run SE files)
http://forum.xda-developers.com/showthread.php?t=1504633
Somehow last night my phone (Galaxy S4 running AOSP 4.4.2) crashed and now it wont reboot. It just sticks on the screen with the four colours animation for ever. I tried deleting the Cache, and Davilik Cache but it has not fixed the problem .. after this is went through the Upgrading Android process for all the apps but then stuck on "Starting Apps" .. so pretty clearly some application is starting and has a problem and so my phone wont boot .. but is there anyway of finding out which application it is?? Im aware I can wipe data and start again but would like to solve the problem without this if its possible. I also tried re-flashing my ROM but it didnt help.
Thanks for any help in advance.
If it helps anybody help me, I plugged my phone into usb while it is stuck in the bootloop and ran
adb logcat *:E .. here is the result
--------- beginning of /dev/log/system
--------- beginning of /dev/log/main
E/DataRouter( 198): USB Interface is open with 0x9
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 1 of 10
E/macloader( 210): CID info file will be created!!!
E/wcnss_service( 221): CAL file not found
E/wcnss_service( 221): Failed to open wcnss device : No such file or directory
E/mm-camera( 211): qcamsvr_start: old_mode = 3f
E/INSTHK ( 249): Checked...
E/PPDaemon( 217): Failed to open the config file!
E/PPDaemon( 217): Panel type: 8
E/rmt_storage( 223): Remote storage service is not supported on mdm target
E/AT_Distributor( 212): Failed to init ATD
E/mm-camera( 211): qcamsvr_load_gesture_lib Error opening gesture library
E/mm-camera( 211): Cannot init Gesture library
E/mm-camera( 211): camera_plugin_create_func: handle = 0xb6c10008, client_open_fn = 0xb6c0d565, destroy_fn = 0xb6c0db99
E/QC-time-services( 220): Daemon:genoff_boot_tod_init: Unable to set TOD at boot up
E/QC-time-services( 220): Daemon: Unable to set TOD at boot up
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/Diag_Lib( 195): Diag_LSM_Init: Failed to open handle to diag driver, error = 13
E/QCNEA ( 214): CnE Standard Version 4.01
E/QCNEA ( 214): CnE Pro Version 1.01
E/QCNEA ( 214): Cne WQE Version 0.1
E/QCNEA ( 214): Cne NSRM Version 1.01
E/Sensorhubs( 207): couldn't find 'ssp_context' input device
E/Sensorhubs( 207): SSPContext: open sensorhub device failed(-1)
E/PRDrmPlugIn( 202): PRDrmPlugin:RDrmPlugin
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::create
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::SetEventHandler
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 2 of 10
E/PRDrmPlugIn( 202): PRDrmPlugin:nGetSupportInfo, uniqueId = 0
E/Sensorhubs( 207): couldn't find 'gesture_sensor' input device
E/MediaPlayerFactory( 203): calling dlopen on FACTORY_LIB
E/MediaPlayerFactory( 203): calling dlsym on pFactoryLib for FACTORY_CREATE_FN
E/MediaPlayerFactory( 203): registering DASH Player factory...
E/QualcommCamera( 203): Qint android::get_number_of_cameras(): E
E/alsa_mixer( 203): Control open failed
E/ ( 203): [ACDB RTC]->rtc init done!->result [0]
E/Diag_Lib( 203): actp_diag_init: call diag init function with B50181DD
E/ ( 203): [ACDB ACPH]->actp diag init done!
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/AndroidRuntime( 201): cannot open customer xml file
E/AndroidRuntime( 201): /system/csc/customer.xml can't open file
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 3 of 10
E/ICD ( 194): There is no file or permission.
E/BootAnimation( 613): Could not open '/sys/devices/w1_bus_master1/w1_master_check_id'
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 4 of 10
E/EmojiFactory_jni( 201): Failed to load libemoji.so: dlopen failed: library "libemoji.so" not found
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 5 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 6 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 7 of 10
E/Sensors ( 768): getName gyro_sensor name file open error.
E/GyroSensor( 768): GyroSensor : getName of gyro_sensor failed.
E/TemperatureHumiditySensor( 768): Failed to open send_accuracy sysfs
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/MagneticSensor( 768): enable, 122, data_fd = -1
E/GyroSensor( 768): enable, 148, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 8 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 9 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 10 of 10
E/kickstart-qcks( 226): '/dev/mdm' was not found
E/kickstart-qcks( 226): ERROR: Can't bring MDM9K out of reset
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_mixer( 203): Control open failed
E/ ( 203): csd_client_service_init: Invalid rx device 0, setting to handset
E/ ( 203): csd_client_service_init: Invalid tx device 0, setting to handset
E/alsa_ucm( 203): Invalid current verb value: Inactive - -1
E/alsa_ucm( 203): No valid device Speaker found
E/alsa_ucm( 203): Control device not initialized
E/alsa_ucm( 203): Control device not initialized
E/alsa_pcm( 203): cannot open device '/dev/snd/pcmC0D0p', errno 2
E/ALSADevice( 203): open: Failed to initialize ALSA device 'hw:0,0'
E/AudioHardwareALSA( 203): Device open failed
E/QMI_FW ( 203): xport_open: socket creation failed - 1
E/AudioPolicyManagerBase( 203): Not output found for attached devices 00000003
E/AudioPolicyManagerBase( 203): Failed to open primary output
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/Audio_Control_CSC( 203): /system/csc/sales_code.dat ==> cannot open file
E/AudioPolicyService( 203): couldn't init_check the audio policy (No such device)
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init:retry count exceeds limitQMI init failed continuing withoutserver
E/QC-time-services( 220): Daemon: QMI init failed, QMI calls inactive
E/QC-time-services( 220): Daemon: Time-services: Waiting to acceptconnection
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/QMI_FW ( 203): open_lookup_sock_fd: Lookup sock fd creation failed
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_enabledisable: delay= 0
E/EventHub( 768): could not get driver version for /dev/input/mice, Not a typewriter
E/ConnectivityService( 768): Error in networkAttributes - ignoring attempt to define type 17
E/ConnectivityService( 768): Ignoring protectedNetwork 14
E/MobileDataStateTracker( 768): default: Ignoring feature request because could not acquire PhoneService
E/MobileDataStateTracker( 768): default: Could not enable APN type "default"
F/SystemServer( 768): BOOT FAILURE Creating Connectivity Engine Service
F/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
F/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
F/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
F/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
F/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
F/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
F/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/SystemServer( 768): Failed to load CNE class
E/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
E/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
E/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
E/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
E/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
E/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
E/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/WifiStateMachine( 768): Unexpected BatchedScanResults :null
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/ActivityManager( 768): Attempt to launch receivers of broadcast intent Intent { act=android.net.ConnectivityService.action.PKT_CNT_SAMPLE_INTERVAL_ELAPSED flg=0x4 (has extras) } before boot completion
Hi.
Not sure if in right place posted, but I think it's more general, maybe even android problem(because of loop), so here it is.
I think I have damaged USB port in my LG P880 (4X HD).
I think so because:
1) When plugging an usb cabel from charger to my phone it's getting detected correctly and charging but strange thing's is happening in background. CPU is going max all the time- process kworker(which is responsible for managing processes shedule in background). More energy is consumed than received. Catlog and video how it's looks here:
CATLOG:
Code:
11:13:23.373 D/Sensors ( 548): * No Motion *
08-03 11:13:23.573 D/AndroidRuntime( 8114): Shutting down VM
08-03 11:13:24.663 I/ActivityManager( 7880): Timeline: Activity_idle id: [email protected] time:3451196
08-03 11:13:25.073 D/AndroidRuntime( 8133): Shutting down VM
08-03 11:13:26.083 V/PhoneStatusBar( 5288): setLightsOn(true)
08-03 11:13:26.103 I/Choreographer( 5288): Skipped 193 frames! The application may be doing too much work on its main thread.
[B]HERE USB PLUGGED IN[/B]
08-03 11:13:27.953 D/Sensors ( 548): * Motion *
08-03 11:13:33.663 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:33.663 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:33.813 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:33.823 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:33.853 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:33.853 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:34.083 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:34.083 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:34.353 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:34.353 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:34.383 I/EntropyMixer( 548): Writing entropy...
08-03 11:13:34.483 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:34.503 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:34.533 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:34.533 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:34.733 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:34.733 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:34.943 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:34.943 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:35.073 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:35.113 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:35.123 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:35.123 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:35.333 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:35.333 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:35.543 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:35.543 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:35.683 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:35.693 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:35.733 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:35.733 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:35.983 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:35.983 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:36.203 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:36.203 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:36.333 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:36.383 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:36.383 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:36.393 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:36.583 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:36.583 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:36.803 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:36.803 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:36.933 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:36.943 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:37.203 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:37.203 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:37.383 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:37.383 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:37.513 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:37.533 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:37.563 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:37.563 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:37.793 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:37.793 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:38.043 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:38.043 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:38.183 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:38.233 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:38.233 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:38.453 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:38.453 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:38.613 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:38.633 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:38.633 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:38.753 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:38.803 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:38.803 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:39.023 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:39.023 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:39.183 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:39.183 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:39.293 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:39.333 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:39.343 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:39.363 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:39.363 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:39.743 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:39.743 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:39.783 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:39.783 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:39.923 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:39.943 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:40.243 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:40.243 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:40.373 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:40.373 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:40.503 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:40.513 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:41.183 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:41.183 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:41.403 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:41.403 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:41.633 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:41.633 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:41.773 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:41.793 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:41.823 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:41.823 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:42.043 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:42.043 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:42.193 D/Sensors ( 548): * No Motion *
08-03 11:13:42.223 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:42.223 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:42.353 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:42.403 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:42.403 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:42.443 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:42.603 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:42.603 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:42.793 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:42.793 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:42.803 E/NotificationService( 548): Not posting notification with icon==0: Notification(pri=0 contentView=null vibrate=default sound=content://media/internal/audio/media/15 defaults=0xfffffffe flags=0x0 kind=[null])
08-03 11:13:42.803 E/NotificationService( 548): WARNING: In a future release this will crash the app: com.android.systemui
08-03 11:13:42.923 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:42.933 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:42.973 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:42.973 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:43.223 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:43.223 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:43.413 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:43.413 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:43.553 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:43.573 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:43.603 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:43.603 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:43.823 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:43.823 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:44.043 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:44.043 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:44.173 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:44.183 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:44.223 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:44.223 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:44.473 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:44.473 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:44.613 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:44.613 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:44.763 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:44.813 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:44.813 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:45.063 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:45.063 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:45.203 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:45.213 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:45.213 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:45.353 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:45.363 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:45.403 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:45.403 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:45.603 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:45.603 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:45.813 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:45.813 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:45.973 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:45.993 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:45.993 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:46.213 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:46.213 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:46.393 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:46.403 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:46.403 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:46.553 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
08-03 11:13:46.553 I/healthd ( 145): battery l=53 v=3811 t=21.6 h=2 st=2 chg=u
[SIZE="1"]NOTHING INTERESTING, TOO MANY CHARACTERS IN POST, DELETED. SAME AS ABOVE AND BELOW.[/SIZE]
08-03 11:13:49.543 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:49.543 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:49.773 D/hwcomposer( 151): hotplug_thread: processing control fd
08-03 11:13:49.773 I/hwcomposer( 151): hotplug: connected = 0
08-03 11:13:49.893 I/healthd ( 145): battery l=53 v=3900 t=21.6 h=2 st=4 chg=
[B]HERE USB PLUGGED OUT I THINK[/B]
08-03 11:13:50.843 D/AwesomePlayer( 154): Before reset_l
08-03 11:13:50.843 D/AwesomePlayer( 154): printFileName fd(132) -> /system/media/audio/notifications/Alya.ogg
08-03 11:13:50.933 I/MediaFocusControl( 548): AudioFocus requestAudioFocus() from [email protected]
08-03 11:13:50.953 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ae3e48 successful
08-03 11:13:50.953 W/MemoryDealer( 154): madvise(0x43a4b000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:50.953 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x45880d00 successful
08-03 11:13:50.953 W/MemoryDealer( 154): madvise(0x43a53000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:50.953 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x45880e40 successful
08-03 11:13:50.953 W/MemoryDealer( 154): madvise(0x43a5b000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:50.953 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x45880f68 successful
08-03 11:13:50.953 W/MemoryDealer( 154): madvise(0x43a63000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:50.953 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:50.953 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:50.953 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:50.953 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:50.953 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:50.953 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:50.953 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:50.953 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:50.953 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:50.953 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:50.953 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:50.953 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:50.963 V/nvaudio_hw( 154): nvaudio_dev_set_parameters : nv_param_media_routing=2
08-03 11:13:50.963 V/nvaudio_hw( 154): Media is routed to :2
08-03 11:13:50.963 V/nvaudio_hw( 154): open_out_alsa_dev dev->id 0, out->format 1 is_pass_thru 0
08-03 11:13:50.963 V/nvaudio_hw( 154): set_out_resampler : quality 4 out->rate 48000, dev->config.rate 48000,
08-03 11:13:50.963 V/nvaudio_hw( 154): set_out_resampler : quality 4 out->channel_count 2, dev->config.channels 2,
08-03 11:13:50.963 V/nvaudio_hw( 154): No resampler required
08-03 11:13:50.963 W/MemoryDealer( 154): madvise(0x48be2000, 4096, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:50.963 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ab30f0 successful
08-03 11:13:50.963 W/MemoryDealer( 154): madvise(0x43505000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:50.963 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ab3038 successful
08-03 11:13:50.973 W/MemoryDealer( 154): madvise(0x43503000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:50.973 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x45880ba8 successful
08-03 11:13:50.973 W/MemoryDealer( 154): madvise(0x43501000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:50.973 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x458809e0 successful
08-03 11:13:50.973 W/MemoryDealer( 154): madvise(0x434ff000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:50.973 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ab3488 successful
08-03 11:13:50.973 W/MemoryDealer( 154): madvise(0x4417a000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:50.973 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ab3360 successful
08-03 11:13:50.973 W/MemoryDealer( 154): madvise(0x44172000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:50.973 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ab3b40 successful
08-03 11:13:50.973 W/MemoryDealer( 154): madvise(0x4416a000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:50.973 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ab31a8 successful
08-03 11:13:50.973 W/MemoryDealer( 154): madvise(0x44162000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:50.973 E/MediaPlayer( 5288): Should have subtitle controller already set
08-03 11:13:50.973 W/RingtonePlayer( 5288): Notification sound delayed by 8168msecs
08-03 11:13:52.213 I/MediaFocusControl( 548): AudioFocus abandonAudioFocus() from [email protected]
08-03 11:13:52.483 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:52.483 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:52.483 V/nvaudio_hw( 154): nvaudio_dev_set_parameters : nv_param_media_routing=2
08-03 11:13:52.483 V/nvaudio_hw( 154): Media is routed to :2
08-03 11:13:53.253 E/NotificationService( 548): Not posting notification with icon==0: Notification(pri=0 contentView=null vibrate=default sound=content://media/internal/audio/media/15 defaults=0xfffffffe flags=0x0 kind=[null])
08-03 11:13:53.253 E/NotificationService( 548): WARNING: In a future release this will crash the app: com.android.systemui
08-03 11:13:53.283 D/AwesomePlayer( 154): Before reset_l
08-03 11:13:53.283 D/AwesomePlayer( 154): printFileName fd(133) -> /system/media/audio/notifications/Alya.ogg
08-03 11:13:53.393 I/MediaFocusControl( 548): AudioFocus requestAudioFocus() from [email protected]
08-03 11:13:53.413 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ab3850 successful
08-03 11:13:53.413 W/MemoryDealer( 154): madvise(0x43a4b000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:53.413 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ab3a70 successful
08-03 11:13:53.413 W/MemoryDealer( 154): madvise(0x43a53000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:53.413 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ab3bb0 successful
08-03 11:13:53.413 W/MemoryDealer( 154): madvise(0x43a5b000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:53.413 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ab3cd8 successful
08-03 11:13:53.413 W/MemoryDealer( 154): madvise(0x43a63000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:53.423 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:53.423 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:53.423 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:53.423 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:53.423 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:53.423 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:53.423 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:53.423 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:53.423 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:53.423 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:53.423 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:53.423 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:53.423 V/nvaudio_hw( 154): nvaudio_dev_set_parameters : nv_param_media_routing=2
08-03 11:13:53.423 V/nvaudio_hw( 154): Media is routed to :2
08-03 11:13:53.423 W/MemoryDealer( 154): madvise(0x48be0000, 4096, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:53.423 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ae3cc0 successful
08-03 11:13:53.423 W/MemoryDealer( 154): madvise(0x434fd000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:53.423 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ae3c08 successful
08-03 11:13:53.423 W/MemoryDealer( 154): madvise(0x434fb000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:53.423 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43a3bf70 successful
08-03 11:13:53.423 W/MemoryDealer( 154): madvise(0x434f9000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:53.423 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43a3bda8 successful
08-03 11:13:53.433 W/MemoryDealer( 154): madvise(0x434f7000, 8192, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:53.433 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x45880d28 successful
08-03 11:13:53.433 W/MemoryDealer( 154): madvise(0x44134000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:53.433 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x45880c00 successful
08-03 11:13:53.433 W/MemoryDealer( 154): madvise(0x4412c000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:53.433 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x43ae3d48 successful
08-03 11:13:53.433 W/MemoryDealer( 154): madvise(0x44124000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:53.433 I/OMXNodeInstance( 154): OMX_FreeBuffer for buffer header 0x4419dd70 successful
08-03 11:13:53.433 W/MemoryDealer( 154): madvise(0x4411c000, 32768, MADV_REMOVE) returned Operation not supported on transport endpoint
08-03 11:13:53.433 E/MediaPlayer( 5288): Should have subtitle controller already set
08-03 11:13:53.743 I/Choreographer( 5288): Skipped 98 frames! The application may be doing too much work on its main thread.
08-03 11:13:54.643 I/MediaFocusControl( 548): AudioFocus abandonAudioFocus() from [email protected]
08-03 11:13:54.833 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:13:54.833 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:13:54.833 V/nvaudio_hw( 154): nvaudio_dev_set_parameters : nv_param_media_routing=2
08-03 11:13:54.833 V/nvaudio_hw( 154): Media is routed to :2
08-03 11:13:57.723 V/nvaudio_hw( 154): nvaudio_out_standby
08-03 11:13:57.723 V/nvaudio_hw( 154): close_alsa_dev : active stream count 1
08-03 11:14:00.193 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:14:00.193 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:14:00.203 V/nvaudio_hw( 154): nvaudio_dev_set_parameters : nv_param_media_routing=2
08-03 11:14:00.203 V/nvaudio_hw( 154): Media is routed to :2
08-03 11:14:00.203 V/nvaudio_hw( 154): open_out_alsa_dev dev->id 0, out->format 1 is_pass_thru 0
08-03 11:14:00.203 V/nvaudio_hw( 154): set_out_resampler : quality 4 out->rate 48000, dev->config.rate 48000,
08-03 11:14:00.203 V/nvaudio_hw( 154): set_out_resampler : quality 4 out->channel_count 2, dev->config.channels 2,
08-03 11:14:00.203 V/nvaudio_hw( 154): No resampler required
08-03 11:14:00.323 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:14:00.323 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:14:00.323 V/nvaudio_hw( 154): nvaudio_dev_set_parameters : nv_param_media_routing=2
08-03 11:14:00.323 V/nvaudio_hw( 154): Media is routed to :2
08-03 11:14:00.913 I/Choreographer( 5288): Skipped 33 frames! The application may be doing too much work on its main thread.
08-03 11:14:01.183 W/ProcessCpuTracker( 548): Skipping unknown process pid 8179
08-03 11:14:01.183 W/ProcessCpuTracker( 548): Skipping unknown process pid 8180
08-03 11:14:02.803 V/nvaudio_hw( 154): nvaudio_dev_get_parameters : fm_audio
08-03 11:14:02.803 I/str_params( 154): key: 'fm_audio' value: ''
08-03 11:14:02.803 V/nvaudio_hw( 154): nvaudio_dev_set_parameters : nv_param_media_routing=2
08-03 11:14:02.803 V/nvaudio_hw( 154): Media is routed to :2
08-03 11:14:02.853 D/su ( 8183): su invoked.
08-03 11:14:02.853 D/su ( 8183): starting daemon client 10063 10063
08-03 11:14:02.853 D/su ( 8185): remote pid: 8183
08-03 11:14:02.853 D/su ( 8185): remote pts_slave:
08-03 11:14:02.853 D/su ( 8185): waiting for child exit
08-03 11:14:02.853 D/su ( 8187): su invoked.
08-03 11:14:02.863 D/su ( 8187): db allowed
08-03 11:14:02.863 D/su ( 8187): 10063 /system/xbin/su executing 0 /system/bin/sh using binary /system/bin/sh : sh
08-03 11:14:02.973 D/su ( 8185): sending code
08-03 11:14:02.973 D/su ( 8185): child exited
08-03 11:14:03.063 D/su ( 8183): client exited 0
08-03 11:14:03.583 D/AndroidRuntime( 8188):
08-03 11:14:03.583 D/AndroidRuntime( 8188): >>>>>> AndroidRuntime START com.android.internal.os.RuntimeInit <<<<<<
08-03 11:14:03.583 D/AndroidRuntime( 8188): CheckJNI is OFF
08-03 11:14:03.613 D/dalvikvm( 8188): Trying to load lib libjavacore.so 0x0
08-03 11:14:03.633 D/dalvikvm( 8188): Added shared lib libjavacore.so 0x0
08-03 11:14:03.633 D/dalvikvm( 8188): Trying to load lib libnativehelper.so 0x0
08-03 11:14:03.633 D/dalvikvm( 8188): Added shared lib libnativehelper.so 0x0
08-03 11:14:03.633 D/dalvikvm( 8188): No JNI_OnLoad found in libnativehelper.so 0x0, skipping init
08-03 11:14:03.723 D/dalvikvm( 8188): Note: class Landroid/app/ActivityManagerNative; has 180 unimplemented (abstract) methods
08-03 11:14:04.083 D/su ( 8198): su invoked.
08-03 11:14:04.103 D/su ( 8198): starting daemon client 10063 10063
08-03 11:14:04.123 D/su ( 8200): remote pid: 8198
08-03 11:14:04.123 D/su ( 8200): remote pts_slave:
08-03 11:14:04.123 D/su ( 8200): waiting for child exit
08-03 11:14:04.123 D/su ( 8202): su invoked.
08-03 11:14:04.123 D/su ( 8202): db allowed
08-03 11:14:04.133 D/su ( 8202): 10063 /system/xbin/su executing 0 /system/bin/sh using binary /system/bin/sh : sh
08-03 11:14:04.133 D/su ( 8200): sending code
08-03 11:14:04.133 D/su ( 8200): child exited
08-03 11:14:04.233 E/memtrack( 8188): Couldn't load memtrack module (No such file or directory)
08-03 11:14:04.233 E/android.os.Debug( 8188): failed to load memtrack module: -2
08-03 11:14:04.833 W/AudioFlinger( 154): write blocked for 744 msecs, 2 delayed writes, thread 0x42920008
08-03 11:14:04.833 D/su ( 8198): client exited 0
08-03 11:14:04.933 D/AndroidRuntime( 8188): Calling main entry com.android.commands.am.Am
08-03 11:14:04.933 D/AndroidRuntime( 8203):
08-03 11:14:04.933 D/AndroidRuntime( 8203): >>>>>> AndroidRuntime START com.android.internal.os.RuntimeInit <<<<<<
08-03 11:14:04.933 D/AndroidRuntime( 8203): CheckJNI is OFF
08-03 11:14:04.943 D/su ( 8205): su invoked.
08-03 11:14:04.993 D/su ( 8205): starting daemon client 10063 10063
I'm new user so can't put links. VIDEO: You know what to do right? youtu.be / 9y5R4_AzyRI
2) When plugging to a PC, device is not getting recognized by the PC. Phone is only charging with the same issue as above. Tried different combination in phone settings like usb debbuging off, MTP etc.
3) When plugging turned off phone to the charger to avoid using cpu it's also charging very slow.
It happened probably when I was on vacation and gave my phone to special charging service because I had no electricity in my tent
Sorry for english.
Thanks for interest.
bump
BUMP
BUMP
BUMP
bump
BUMP
bump
Bump
BUMP
bump
bump
BUMP
Down by law. BUMP
Hello, here is my problem,
I have always ported the miui rom to my thl w200 device.
in the latest builds, after porting it to my phone I get stuck at bootlogo.
I did a logcat but cant really find what causes this.
someone can look at it and help me?
--------- beginning of /dev/log/main
I/Resize ( 86): The size of data already meet the request.
I/Resize ( 86): Partition has been resized,so nothing to do!
D/ADB_SERVICES( 158): install_listener('tcp:5037','*smartsocket*')
D/ADB_SERVICES( 158): adb_main(): pre init_jdwp()
D/ADB_SERVICES( 158): adb_main(): post init_jdwp()
D/ADB_SERVICES( 158): Event loop starting
D/ADB_SERVICES( 158): transport: 0xf67520 init'ing for usb_handle 0xf67498 (sn='')
I/ADB_SERVICES( 158): transport: usb
D/ADB_SERVICES( 158): transport: (null) registered
D/ADB_SERVICES( 158): transport: (null) (16,17) starting
W/ADB_SERVICES( 158): (null): starting transport input thread, reading from fd 17
W/ADB_SERVICES( 158): (null): starting transport output thread on fd 17, SYNC online (2)
D/ADB_SERVICES( 158): recv: SYNC 00000001 00000002 0000
W/ADB_SERVICES( 158): (null): transport SYNC online
E/ccci_mdinit(0)( 121): md_init ver:1.00
E/ccci_mdinit(0)( 120): md_init ver:1.00
I/6620_launcher( 117): open device node succeed.(Node:/dev/stpwmt, fd:3)
I/6620_launcher( 117): keypersist.mtk.wcn.combo.chipid)-value0x6628),chipId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): chiId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): set chipId(0x6628) to HIF-SDIO module
I/6620_launcher( 117): Info:key:mt6620.defAnt value:mt6620_ant_m3.cfg
I/6620_launcher( 117): Info:key:mt6628.defAnt value:mt6628_ant_m1.cfg
I/6620_launcher( 117): NULL is returned, eighter EOF or error maybe found
I/6620_launcher( 117): close /system/etc/firmware/WMT.cfg succeed
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): STP Mode is not set, fetching default mode...
I/6620_launcher( 117): chipId(0x6628), default Mode(1), strlen(gWmtCfgName)(39), wmtCfgFile(/system/etc/firmware//mt6628_ant_m1.cfg)
I/6620_launcher( 117): HifConfig:0x0001, wmtCfgFile:/system/etc/firmware//mt6628_ant_m1.cfg
I/6620_launcher( 117): keyro.build.type)-valueuser)
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): uart name ttyMT2
D/MsensorDaemon( 151): Msensor deamon statr!!!!!!!!!!!!
D/MsensorDaemon( 151): msensor demon start process detect demon name = memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): msensor demon start process detect demon prop = init.svc.memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): start_msensor_demon
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
E/MsensorDaemon( 151): [99] ''
D/permission_check( 145): permission check ver:0.01
D/permission_check( 145): Empty, not decrypt!
D/permission_check( 145): change_md_nvram_attr++
--------- beginning of /dev/log/system
E/POAD ( 155): boot_mode = 0
E/POAD ( 155): update boot reason = 0
D/permission_check( 145): new_ver file exist!!!
D/permission_check( 145): change_md_nvram_attr--0
I/stp_dump( 143): ==>main
I/stp_dump( 143): stp_dump_ctrl_iface_trace_logger_sendto_fd succeed
E/stp_dump( 143): [STP_DBG] family id = 19
I/stp_dump( 143): sending dummy command
I/stp_dump( 143): set sock number to 9
I/stp_dump( 143): addr.sun_path:stp_DIR=/data/misc/stp_dump GROUP=stp
I/stp_dump( 143): Using existing control interface directory.
E/stp_dump( 143): mkdir (/data/misc/stp_dump) succeed
I/stp_dump( 143): ctrl_interface_group=1000 (from group name 'stp')
I/stp_dump( 143): chown (/data/misc/stp_dump) succeed
I/stp_dump( 143): CTRL: chmod[/data/misc/stp_dump] succeed
E/stp_dump( 143): ctrl_iface bind(PF_UNIX) failed: Address already in use
E/stp_dump( 143): ctrl_iface exists, but does not allow connections - assuming it was leftover from forced program termination
D/stp_dump( 143): Successfully replaced leftover ctrl_iface socket '/data/misc/stp_dump/stpd'
I/stp_dump( 143): set sock number to 10
I/stp_dump( 143): stp_dump_ctrl_iface_init succeed.
I/stp_dump( 143): ==>main222
I/busybox ( 114): run-parts: /system/etc/init.d: No such file or directory
D/wlanLoader( 144): checkSupport 0x6628
D/wlanLoader( 144): Match 0x6628
D/wlanLoader( 144): Get the correct chip version mt6628
D/wlanLoader( 144): Get chip Version mt6628.
D/wlanLoader( 144): DRIVER_MODULE_PATH is /system/lib/modules/wlan_mt6628.ko
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
D/MsensorDaemon( 151): memsicd3416x running
D/MsensorDaemon( 151): Msensor deamon2 statr!!!!!!!!!!!!
D/MsensorDaemon( 151): open demon attr err = No such file or directory
E/stp_dump( 143): table == NULL || table->table == NULL
E/stp_dump( 143): table == NULL || table->table == NULL
D/wlanLoader( 144): Success to insmod the /system/lib/modules/wlan_mt6628.ko
I/thermal_repeater( 154): START+++++++++ 154
I/thermal_repeater( 154): Success to write 154 to /proc/wmt_tm/tm_pid
I/thermal_repeater( 154): Fail to chmod ffffffff
I/thermal_repeater( 154): Enter infinite loop
I/AEE/AED ( 122): Built Jan 30 2013 19:35:15
D/AEE/AED ( 122): ChangeAEEWorkMode: 3
I/AEE/AED ( 122): AED config
I/AEE/AED ( 122): mode '3'
I/AEE/AED ( 122): exp level '1
I/AEE/AED ( 122): dal enable '0'
I/AEE/AED ( 122): db count '20'
I/AEE/AED ( 122): db storage '1'
I/AEE/AED ( 122): SMP Info => 1
I/MobileLogD( 123): [void change_permission()] set mobile_log_d is in root user, adjust caps for its thread
I/MobileLogD( 123): mobilelog start after boot, mode:0
D/MobileLogD/cache( 123): init cache configure items....
D/MobileLogD/cache( 123): value of ro.build.type:user.
I/installd( 140): installd firing up
D/PQ ( 130): PQ init start...
D/PQ ( 130): PQ test...
I/ ( 137): ServiceManager: 0x41661698
D/PQ ( 130): PQ init end !
E/AEE/LIBAEE( 122): Can't remove file /sdcard/mtklog/aee_exp/temp: No such file or directory
E/AEE/LIBAEE( 122): Can't remove file /data/aee_exp/temp: No such file or directory
V/AEE/AED ( 122): ETB buffer length = 512
I/AEE/AED ( 122): wdt_status = 2, fiq_step=0
I/AEE/AED ( 122): reboot_reason = 0
V/AEE/AED ( 122): ETM start
D/installd( 140): LBE is enabled, starting...
D/NVRAM ( 152): NvRAMAgent created
E/NVRAM ( 152): Haman, serviceManager work well
D/NVRAM ( 152): NvRAMAgent Service is now ready
I/DPFD ( 149): [DPFD] main start ...
I/DPFD ( 149): [DPFD] set priority to RR:268435540
I/DPFD ( 149): [int adjustPriority()] set dpfd is in root user, adjust caps for its thread
D/DPFD ( 149): [DPFD] Wait Request.....
I/DMAgent ( 147): DMAgent created
I/DMAgent ( 147): [DMAgent]register OK.
D/DMAgent ( 147): DMAgent Service is now ready
D/MobileLogD( 123): write "mobilelog start after boot, mode:0" to mblog
E/installd( 140): Failed to load liblbesec.so
I/installd( 140): add service shelld success!
W/installd( 140): service start entry 'shelld', flag :0
W/installd( 140): starting 'shelld'
E/ccci_fsd(0)( 118): md_fsd Ver:v1.00
I/Hald ( 133): Hald 1.1011 starting
D/ccci_fsd(1)( 118): /dev/ccci_fs is opend(600).
D/ccci_fsd(1)( 118): Check OTP...
D/Hald ( 133): Create ResetManager
D/Hald ( 133): Size of initial message: 6
D/Hald ( 133): [MTK_WIFI] family id = 20
D/Hald ( 133): Reset Manager Prepare Dummy command
D/Hald ( 133): Reset Manager Send Command for binding
D/Hald ( 133): Start ResetManager
E/ccci_fsd(0)( 119): md_fsd Ver:v1.00
E/ccci_fsd(2)( 119): /dev/ccci2_fs is not enabled(2).
D/MobileLogD/cache( 123): config autostart=0 same as current value
D/MobileLogD/cache( 123): config logpath=/mnt/sdcard same as current value
D/MobileLogD/cache( 123): config logsize=300 same as current value
D/MobileLogD/cache( 123): config AndroidLog=1 same as current value
D/MobileLogD/cache( 123): config KernelLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
E/MobileLogD/cache( 123): cant get true log path through property
E/MobileLogD/cache( 123): true path is /mnt/sdcard
D/MobileLogD( 123): create local socket server success
D/Vold ( 116): Check whether nvram restore ready!
D/NVRAM ( 128): g_i4CFG_File_Count: 25
D/NVRAM ( 128): NVM_Init Max Lid: 43
D/NVRAM ( 128): Total nvram Lid number is 43
I/Netd ( 125): Netd 1.0 starting
W/InterfaceController( 125): Warning (Cannot load library: load_library(linker.cpp:745): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library
D/agps ( 142): [agps] WARNING: [Main] mtk_agpsd is running ver=0.46
D/agps ( 142): [agps] WARNING: [Main] mkdir failure for /data/agps_supl/log reason=[File exists]
D/MtkAgpsNative( 142): SuplRawLog.bEnable:0
D/MtkAgpsNative( 142): SuplRawLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplRawLog.szFile:agps_raw.log
D/MtkAgpsNative( 142): SuplSslLog.bEnable:0
D/MtkAgpsNative( 142): SuplSslLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplSslLog.szFile:agps_ssl.log
I/MtkAgpsNative( 142): Enter up_int_init
I/MtkAgpsNative( 142): Enter mtk_agps_up_init
D/MtkAgpsNative( 142): FS_CreateDir: /data/agps_supl
W/MtkAgpsNative( 142): -> errno(EEXIST) => dir already exists
D/MtkAgpsNative( 142): ############ mtk_agps_up_init --> agps_disable_enalbe_times = 1 ############
Click to expand...
Click to collapse
Hi Guys
So I tried to port a MIUI V5 4.4.2 ROM to my device and after rebooting after flashing it everytime, I get an unresponisve black screen but device is detected by adb so I can easily boot into recovery. Recovery.log is perfectly clear though no problems during flashing. But this logcat goes way overy my head. Can you guys please help me Don't ignore this thread as I have trying the port since a month and litreally tried all guides, videos, tut's, google etc but didn't end up on a satisfactory guide. No guide could solve the problme. Asked many porting devs still no answer. So lets begin with basic info.
I have XOLO HIVE 8x-1000 MT6592 with 2 GB Ram ( rest specs can be found here - XOLO 8x-1000 Specifications ) and the rom I am trying to port is ELephone P9 ported ROM, MIUI V5 for Elephone P9 which is really same as my device except NFC and CPU clocking as it's 1.7 Ghz and mine is 1.4 Ghz, here specs forELEPHONE P9.
So I assume you must have looked specs of both devices which prove that they are identical in most aspects and I also hope you took a proper look at the ROM I am trying to port as I provided the link. So I asked every person I could from a noob to a dev who can help me but no answer and even no guide on how to port MIUI KK V5 for MTK devices. My logcat is in first post. Please do have a look and reply to it.
EDIT : I am using Windows 7 Ultimate as OS and WinRAR to port and Notepad++ set in UNIX mode to edit all my stuff like updater-script etc and also added logcat.txt if you want to have a look later at offline mode. Please help me. :'(
Here is my logcat now : Part 1
D/libEGL ( 784): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 784): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 784): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/[MALI][Gralloc]( 784): dlopen libsec_mem.so fail
I/gralloc ( 784): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 784): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 784): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 784): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 784): ro_dpi: 320.000000
I/[MALI][Gralloc]( 784): using (fd=19)
I/[MALI][Gralloc]( 784): id = mtkfb
I/[MALI][Gralloc]( 784): xres = 720 px
I/[MALI][Gralloc]( 784): yres = 1280 px
I/[MALI][Gralloc]( 784): xres_virtual = 720 px
I/[MALI][Gralloc]( 784): yres_virtual = 3840 px
I/[MALI][Gralloc]( 784): bpp = 32
I/[MALI][Gralloc]( 784): r = 16:8
I/[MALI][Gralloc]( 784): g = 8:8
I/[MALI][Gralloc]( 784): b = 0:8
I/[MALI][Gralloc]( 784): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 784): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 784): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 784): init_framebuffer va: 0xb561c000 mva: 0xfeb00000
E/M4U_L ( 784): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 784): [DPY] Display Information:
I/hwcomposer( 784): [DPY] # fo devices : 1
I/hwcomposer( 784): [DPY] -----------------------------
I/hwcomposer( 784): [DPY] Device id : 0
I/hwcomposer( 784): [DPY] Width : 720
I/hwcomposer( 784): [DPY] Height : 1280
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/hwcomposer( 784): [DPY] xdpi : 320.000000
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 784): [DPY] ydpi : 320.000000
I/hwcomposer( 784): [DPY] vsync : 1
I/hwcomposer( 784): [DPY] refresh : 16507097
I/hwcomposer( 784): [DPY] connected : 1
I/hwcomposer( 784): [DPY] subtype : 0
W/hwcomposer( 784): [EVENT] HW VSync State(1)
W/hwcomposer( 784): [EVENT] Start to listen uevent, addr.nl_pid(784)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 784): Using composer version 1.2
I/hwcomposer( 784): [HWC] getConfigs Display(0)
I/hwcomposer( 784): [HWC] getAttributes Display(0)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [HWC] getConfigs Display(1)
I/hwcomposer( 784): [HWC] getAttributes Display(1)
E/hwcomposer( 784): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 784): no suitable EGLConfig found, trying a simpler query
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 784): no suitable EGLConfig found, giving up
F/libc ( 784): Fatal signal 6 (SIGABRT) at 0x00000310 (code=-6), thread 784
(surfaceflinger)
F/libc ( 784): Unable to open connection to debuggerd: Connection refused
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): Netd 1.0 starting
W/InterfaceController( 820): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 821): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 821): SurfaceFlinger is starting
I/SurfaceFlinger( 821): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 821): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 821): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 821): dlopen libsec_mem.so fail
I/gralloc ( 821): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 821): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 821): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 821): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 821): ro_dpi: 320.000000
I/[MALI][Gralloc]( 821): using (fd=19)
I/[MALI][Gralloc]( 821): id = mtkfb
I/[MALI][Gralloc]( 821): xres = 720 px
I/[MALI][Gralloc]( 821): yres = 1280 px
I/[MALI][Gralloc]( 821): xres_virtual = 720 px
I/[MALI][Gralloc]( 821): yres_virtual = 3840 px
I/[MALI][Gralloc]( 821): bpp = 32
I/[MALI][Gralloc]( 821): r = 16:8
I/[MALI][Gralloc]( 821): g = 8:8
I/[MALI][Gralloc]( 821): b = 0:8
I/[MALI][Gralloc]( 821): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 821): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 821): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 821): init_framebuffer va: 0xb5565000 mva: 0xfeb00000
E/M4U_L ( 821): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 821): [DPY] Display Information:
I/hwcomposer( 821): [DPY] # fo devices : 1
I/hwcomposer( 821): [DPY] -----------------------------
I/hwcomposer( 821): [DPY] Device id : 0
I/hwcomposer( 821): [DPY] Width : 720
I/hwcomposer( 821): [DPY] Height : 1280
I/hwcomposer( 821): [DPY] xdpi : 320.000000
I/hwcomposer( 821): [DPY] ydpi : 320.000000
I/hwcomposer( 821): [DPY] vsync : 1
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 821): [DPY] refresh : 16507097
I/hwcomposer( 821): [DPY] connected : 1
I/hwcomposer( 821): [DPY] subtype : 0
W/hwcomposer( 821): [EVENT] HW VSync State(1)
W/hwcomposer( 821): [EVENT] Start to listen uevent, addr.nl_pid(821)
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 821): Using composer version 1.2
I/hwcomposer( 821): [HWC] getConfigs Display(0)
I/hwcomposer( 821): [HWC] getAttributes Display(0)
I/hwcomposer( 821): [HWC] getConfigs Display(1)
I/hwcomposer( 821): [HWC] getAttributes Display(1)
E/hwcomposer( 821): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 821): no suitable EGLConfig found, trying a simpler query
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 821): no suitable EGLConfig found, giving up
F/libc ( 821): Fatal signal 6 (SIGABRT) at 0x00000335 (code=-6), thread 821
(surfaceflinger)
F/libc ( 821): Unable to open connection to debuggerd: Connection refused
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/sn ( 191): Retry 5
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Check all possible paths
I/Netd ( 858): Netd 1.0 starting
W/InterfaceController( 858): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/ADB_SERVICES( 198): adb fdevent_process list (12) (18)
D/ADB_SERVICES( 198): adb socket read list (18)
D/ADB_SERVICES( 198): read_data=11945
D/ADB_SERVICES( 198): max_read_time=0.000080 max_send_time=0.000063
D/ADB_SERVICES( 198): adb local_socket_ready list (18)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 859): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 859): SurfaceFlinger is starting
I/SurfaceFlinger( 859): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 859): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 859): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 859): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 859): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 859): dlopen libsec_mem.so fail
I/gralloc ( 859): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 859): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 859): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 859): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 859): ro_dpi: 320.000000
I/[MALI][Gralloc]( 859): using (fd=19)
I/[MALI][Gralloc]( 859): id = mtkfb
I/[MALI][Gralloc]( 859): xres = 720 px
I/[MALI][Gralloc]( 859): yres = 1280 px
I/[MALI][Gralloc]( 859): xres_virtual = 720 px
I/[MALI][Gralloc]( 859): yres_virtual = 3840 px
I/[MALI][Gralloc]( 859): bpp = 32
I/[MALI][Gralloc]( 859): r = 16:8
I/[MALI][Gralloc]( 859): g = 8:8
I/[MALI][Gralloc]( 859): b = 0:8
I/[MALI][Gralloc]( 859): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 859): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 859): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 859): init_framebuffer va: 0xb55c4000 mva: 0xfeb00000
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
Logcat Part 2
E/M4U_L ( 859): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 859): [DPY] Display Information:
I/hwcomposer( 859): [DPY] # fo devices : 1
I/hwcomposer( 859): [DPY] -----------------------------
I/hwcomposer( 859): [DPY] Device id : 0
I/hwcomposer( 859): [DPY] Width : 720
I/hwcomposer( 859): [DPY] Height : 1280
I/hwcomposer( 859): [DPY] xdpi : 320.000000
I/hwcomposer( 859): [DPY] ydpi : 320.000000
I/hwcomposer( 859): [DPY] vsync : 1
I/hwcomposer( 859): [DPY] refresh : 16507097
I/hwcomposer( 859): [DPY] connected : 1
I/hwcomposer( 859): [DPY] subtype : 0
W/hwcomposer( 859): [EVENT] HW VSync State(1)
W/hwcomposer( 859): [EVENT] Start to listen uevent, addr.nl_pid(859)
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 859): Using composer version 1.2
I/hwcomposer( 859): [HWC] getConfigs Display(0)
I/hwcomposer( 859): [HWC] getAttributes Display(0)
I/hwcomposer( 859): [HWC] getConfigs Display(1)
I/hwcomposer( 859): [HWC] getAttributes Display(1)
E/hwcomposer( 859): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 859): no suitable EGLConfig found, trying a simpler query
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 859): no suitable EGLConfig found, giving up
F/libc ( 859): Fatal signal 6 (SIGABRT) at 0x0000035b (code=-6), thread 859
(surfaceflinger)
F/libc ( 859): Unable to open connection to debuggerd: Connection refused
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/iptables( 858): iptables: Chain already exists.
I/iptables( 858): iptables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/iptables -t filter -
N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/ip6tables( 858): ip6tables: Chain already exists.
I/ip6tables( 858): ip6tables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/ip6tables -t filter
-N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 784): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
D/libEGL ( 784): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 784): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/[MALI][Gralloc]( 784): dlopen libsec_mem.so fail
I/gralloc ( 784): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 784): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 784): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 784): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 784): ro_dpi: 320.000000
I/[MALI][Gralloc]( 784): using (fd=19)
I/[MALI][Gralloc]( 784): id = mtkfb
I/[MALI][Gralloc]( 784): xres = 720 px
I/[MALI][Gralloc]( 784): yres = 1280 px
I/[MALI][Gralloc]( 784): xres_virtual = 720 px
I/[MALI][Gralloc]( 784): yres_virtual = 3840 px
I/[MALI][Gralloc]( 784): bpp = 32
I/[MALI][Gralloc]( 784): r = 16:8
I/[MALI][Gralloc]( 784): g = 8:8
I/[MALI][Gralloc]( 784): b = 0:8
I/[MALI][Gralloc]( 784): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 784): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 784): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 784): init_framebuffer va: 0xb561c000 mva: 0xfeb00000
E/M4U_L ( 784): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 784): [DPY] Display Information:
I/hwcomposer( 784): [DPY] # fo devices : 1
I/hwcomposer( 784): [DPY] -----------------------------
I/hwcomposer( 784): [DPY] Device id : 0
I/hwcomposer( 784): [DPY] Width : 720
I/hwcomposer( 784): [DPY] Height : 1280
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/hwcomposer( 784): [DPY] xdpi : 320.000000
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 784): [DPY] ydpi : 320.000000
I/hwcomposer( 784): [DPY] vsync : 1
I/hwcomposer( 784): [DPY] refresh : 16507097
I/hwcomposer( 784): [DPY] connected : 1
I/hwcomposer( 784): [DPY] subtype : 0
W/hwcomposer( 784): [EVENT] HW VSync State(1)
W/hwcomposer( 784): [EVENT] Start to listen uevent, addr.nl_pid(784)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 784): Using composer version 1.2
I/hwcomposer( 784): [HWC] getConfigs Display(0)
I/hwcomposer( 784): [HWC] getAttributes Display(0)
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [WKR] Set priority to RR: 268435543
I/hwcomposer( 784): [HWC] getConfigs Display(1)
I/hwcomposer( 784): [HWC] getAttributes Display(1)
E/hwcomposer( 784): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 784): no suitable EGLConfig found, trying a simpler query
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 784): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 784): no suitable EGLConfig found, giving up
F/libc ( 784): Fatal signal 6 (SIGABRT) at 0x00000310 (code=-6), thread 784
(surfaceflinger)
F/libc ( 784): Unable to open connection to debuggerd: Connection refused
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 783): execIptablesCommand android_fork_execvp exit
I/Netd ( 783): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): Netd 1.0 starting
W/InterfaceController( 820): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 821): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 821): SurfaceFlinger is starting
I/SurfaceFlinger( 821): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 821): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 821): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 821): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 821): dlopen libsec_mem.so fail
I/gralloc ( 821): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 821): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 821): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 821): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 821): ro_dpi: 320.000000
I/[MALI][Gralloc]( 821): using (fd=19)
I/[MALI][Gralloc]( 821): id = mtkfb
I/[MALI][Gralloc]( 821): xres = 720 px
I/[MALI][Gralloc]( 821): yres = 1280 px
I/[MALI][Gralloc]( 821): xres_virtual = 720 px
I/[MALI][Gralloc]( 821): yres_virtual = 3840 px
I/[MALI][Gralloc]( 821): bpp = 32
I/[MALI][Gralloc]( 821): r = 16:8
I/[MALI][Gralloc]( 821): g = 8:8
I/[MALI][Gralloc]( 821): b = 0:8
I/[MALI][Gralloc]( 821): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 821): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 821): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 821): init_framebuffer va: 0xb5565000 mva: 0xfeb00000
E/M4U_L ( 821): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 821): [DPY] Display Information:
I/hwcomposer( 821): [DPY] # fo devices : 1
I/hwcomposer( 821): [DPY] -----------------------------
I/hwcomposer( 821): [DPY] Device id : 0
I/hwcomposer( 821): [DPY] Width : 720
I/hwcomposer( 821): [DPY] Height : 1280
I/hwcomposer( 821): [DPY] xdpi : 320.000000
I/hwcomposer( 821): [DPY] ydpi : 320.000000
I/hwcomposer( 821): [DPY] vsync : 1
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/hwcomposer( 821): [DPY] refresh : 16507097
I/hwcomposer( 821): [DPY] connected : 1
I/hwcomposer( 821): [DPY] subtype : 0
W/hwcomposer( 821): [EVENT] HW VSync State(1)
W/hwcomposer( 821): [EVENT] Start to listen uevent, addr.nl_pid(821)
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/hwcomposer( 821): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 821): Using composer version 1.2
I/hwcomposer( 821): [HWC] getConfigs Display(0)
I/hwcomposer( 821): [HWC] getAttributes Display(0)
I/hwcomposer( 821): [HWC] getConfigs Display(1)
I/hwcomposer( 821): [HWC] getAttributes Display(1)
E/hwcomposer( 821): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 821): no suitable EGLConfig found, trying a simpler query
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 821): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 821): no suitable EGLConfig found, giving up
F/libc ( 821): Fatal signal 6 (SIGABRT) at 0x00000335 (code=-6), thread 821
(surfaceflinger)
F/libc ( 821): Unable to open connection to debuggerd: Connection refused
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/Netd ( 820): execIptablesCommand android_fork_execvp exit
I/Netd ( 820): execIptablesCommand android_fork_execvp enter
I/sn ( 191): Retry 5
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Fail to access err=No such file or directory
I/sn ( 191): Check all possible paths
I/Netd ( 858): Netd 1.0 starting
W/InterfaceController( 858): Warning (dlopen failed: library "/system/lib/libne
tcmdiface.so" not found) while opening the net interface command library
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/ADB_SERVICES( 198): adb fdevent_process list (12) (18)
D/ADB_SERVICES( 198): adb socket read list (18)
D/ADB_SERVICES( 198): read_data=11945
D/ADB_SERVICES( 198): max_read_time=0.000080 max_send_time=0.000063
D/ADB_SERVICES( 198): adb local_socket_ready list (18)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/SurfaceFlinger( 859): [int main(int, char**)] set surfaceflinger is in root u
ser, adjust caps for its thread
I/SurfaceFlinger( 859): SurfaceFlinger is starting
I/SurfaceFlinger( 859): SurfaceFlinger's main thread ready to run. Initializing
graphics H/W...
D/libEGL ( 859): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 859): loaded /system/lib/egl/libGLESv1_CM_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
D/libEGL ( 859): loaded /system/lib/egl/libGLESv2_mali.so
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3003
W/libEGL ( 859): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/[MALI][Gralloc]( 859): dlopen libsec_mem.so fail
I/gralloc ( 859): [Gralloc] refreshRate = 0, info.pixclock = ffffffff
I/gralloc ( 859): [Gralloc] info.upper_margin = ffffffff, info.lower_margin = f
fffffff
I/gralloc ( 859): [Gralloc] info.yres = 500, info.hsync_len = ffffffff
I/gralloc ( 859): [Gralloc] info.left_margin = ffffffff, info.right_margin = ff
ffffff
I/[MALI][Gralloc]( 859): ro_dpi: 320.000000
I/[MALI][Gralloc]( 859): using (fd=19)
I/[MALI][Gralloc]( 859): id = mtkfb
I/[MALI][Gralloc]( 859): xres = 720 px
I/[MALI][Gralloc]( 859): yres = 1280 px
I/[MALI][Gralloc]( 859): xres_virtual = 720 px
I/[MALI][Gralloc]( 859): yres_virtual = 3840 px
I/[MALI][Gralloc]( 859): bpp = 32
I/[MALI][Gralloc]( 859): r = 16:8
I/[MALI][Gralloc]( 859): g = 8:8
I/[MALI][Gralloc]( 859): b = 0:8
I/[MALI][Gralloc]( 859): width = 57 mm (320.842102 dpi)
I/[MALI][Gralloc]( 859): height = 102 mm (318.745087 dpi)
I/[MALI][Gralloc]( 859): refresh rate = 60.00 Hz
I/[MALI][Gralloc]( 859): init_framebuffer va: 0xb55c4000 mva: 0xfeb00000
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
E/M4U_L ( 859): ioctl MTK_M4U_T_M4UDrv_CONSTRUCT fail! 2, No such file or di
rectory
I/hwcomposer( 859): [DPY] Display Information:
I/hwcomposer( 859): [DPY] # fo devices : 1
I/hwcomposer( 859): [DPY] -----------------------------
I/hwcomposer( 859): [DPY] Device id : 0
I/hwcomposer( 859): [DPY] Width : 720
I/hwcomposer( 859): [DPY] Height : 1280
I/hwcomposer( 859): [DPY] xdpi : 320.000000
I/hwcomposer( 859): [DPY] ydpi : 320.000000
I/hwcomposer( 859): [DPY] vsync : 1
I/hwcomposer( 859): [DPY] refresh : 16507097
I/hwcomposer( 859): [DPY] connected : 1
I/hwcomposer( 859): [DPY] subtype : 0
W/hwcomposer( 859): [EVENT] HW VSync State(1)
W/hwcomposer( 859): [EVENT] Start to listen uevent, addr.nl_pid(859)
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/hwcomposer( 859): [WKR] Set priority to RR: 268435543
I/SurfaceFlinger( 859): Using composer version 1.2
I/hwcomposer( 859): [HWC] getConfigs Display(0)
I/hwcomposer( 859): [HWC] getAttributes Display(0)
I/hwcomposer( 859): [HWC] getConfigs Display(1)
I/hwcomposer( 859): [HWC] getAttributes Display(1)
E/hwcomposer( 859): [HWC] Failed to get display attributes (dpy=1 is not connec
ted)
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/SurfaceFlinger( 859): no suitable EGLConfig found, trying a simpler query
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
W/MALI ( 859): __egl_set_error:110: [WARNING]Mali EGL errorcode: 3001
F/SurfaceFlinger( 859): no suitable EGLConfig found, giving up
F/libc ( 859): Fatal signal 6 (SIGABRT) at 0x0000035b (code=-6), thread 859
(surfaceflinger)
F/libc ( 859): Unable to open connection to debuggerd: Connection refused
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/iptables( 858): iptables: Chain already exists.
I/iptables( 858): iptables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/iptables -t filter -
N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
I/ip6tables( 858): ip6tables: Chain already exists.
I/ip6tables( 858): ip6tables terminated by exit(1)
I/Netd ( 858): execIptablesCommand android_fork_execvp exit
E/Netd ( 858): exec() res=0, status=256 for /system/bin/ip6tables -t filter
-N firewall
I/Netd ( 858): execIptablesCommand android_fork_execvp enter
[/SIZE][/B]
Now please help me! As I am clueless where to begin or where to end! :crying::silly:
Fixed it
Moderator please close this thread
Sent from my bobobibi
Tech N You said:
Fixed it
Moderator please close this thread
Click to expand...
Click to collapse
How did you fix it?
Bormental said:
How did you fix it?
Click to expand...
Click to collapse
LIBEGL errors are gpu ones.
I replaced libmali.so and it worked
Sent from 8x-1000 Using XXX ROM (Xceptional XPERIA Xperiance)
Tech N You said:
LIBEGL errors are gpu ones.
I replaced libmali.so and it worked
Click to expand...
Click to collapse
it works. Thank you!
Bormental said:
it works. Thank you!
Click to expand...
Click to collapse
Glad I helped you
Sent from 8x-1000 Using XXX ROM (Xceptional XPERIA Xperiance)