I seem to be having incredulous difficulty getting AC!D Audio to work on any ROM I throw at it, so I'm done searching and instead resorting to reaching out to the community specifically. Does anybody know of any sound mods that work well with AOSP JB ROMs? The sound quality is just absolutely terrible, but I want to keep the AOSP look and feel. Touchwiz or ShoStock3 seems to have the best audio drivers for my taste, but is there some way to modify the AOSP audio quality? I've tried flashing Siyah's kernel to boost the headphone's gain but even then the quality is just awful. I've tried PlayerPro, PowerAmp, nothing seems to compare to ShoStock3's audio quality. This is a big deal, as music is my life and it would be much appreciated if anyone could relate/help.
check
did you check your speakers ? if they are working fine you may go to shostock rom thread and ask if audio drivers can be ported or individually uploaded or you may try xperia multie themed rom i use it and its completely fast and customisable and every thing works with no lag or audio issue
CyanJustice said:
I seem to be having incredulous difficulty getting AC!D Audio to work on any ROM I throw at it, so I'm done searching and instead resorting to reaching out to the community specifically. Does anybody know of any sound mods that work well with AOSP JB ROMs? The sound quality is just absolutely terrible, but I want to keep the AOSP look and feel. Touchwiz or ShoStock3 seems to have the best audio drivers for my taste, but is there some way to modify the AOSP audio quality? I've tried flashing Siyah's kernel to boost the headphone's gain but even then the quality is just awful. I've tried PlayerPro, PowerAmp, nothing seems to compare to ShoStock3's audio quality. This is a big deal, as music is my life and it would be much appreciated if anyone could relate/help.
Click to expand...
Click to collapse
Related
So far I've been using the ARHD 17.0 and never looked back since I didn't have any issues. I decided to install a newer version today, and to my surprise the sound quality has worsened (not as loud and clean), I tried flashing the latest perseus kernel but that actually made my headphones crackle and didn't provide me with the same quality that I was used to on ARHD 17.0.
Now is there some sort of setting I'm supposed to change as the sound is much like stock only louder now without any actual improvements?
Rzarector said:
So far I've been using the ARHD 17.0 and never looked back since I didn't have any issues. I decided to install a newer version today, and to my surprise the sound quality has worsened (not as loud and clean), I tried flashing the latest perseus kernel but that actually made my headphones crackle and didn't provide me with the same quality that I was used to on ARHD 17.0.
Now is there some sort of setting I'm supposed to change as the sound is much like stock only louder now without any actual improvements?
Click to expand...
Click to collapse
Try a kernel with Boeffla Sound Engine in it. There are kernels for AOSP/CM ROMs and stock ROMs, so be careful which one you choose. Quite a few folks are including the Engine in their kernel.
https://play.google.com/store/apps/details?id=com.near.boefflasound&hl=en
More is NOT better when it comes to sound improvements. The best things that Boeffla does is allow you to clean up the signal noise considerably on CM/AOSP kernels which is introduced by the terrible incomplete and/or non-existent sources that Samdung provided to the OpenSource community devs.
Keep the settings at a minimum and tread lightly when adjusting. I've found that this engine allows me to enjoy CM for the first time in the way I've always wanted. I just could not stomach the difference between the signal source sound from stock to CM kernels, but Boeffla makes it tolerable, not by just masking it with "more bass" or gimmicks like "Beats" does, but by actually tuning the FLL on the chip and cleaning up the signal through oversampling, etc.
It works pretty darn well. Close to stock, actually. Very close. It's been a real treat for me, because I had given up on custom kernels and ROMs because of the sound issues they bring, so I feel the pain. I'm a musician, and I have an ear for this stuff, from a studio perspective, and I'd encourage you to check it out. If the kernel dev doesn't include it, the Sound Control won't work, so you just need to check.
The Wolfson DAC in the S3 really is superb. It's a shame that Samdung refuses to share userspace sources to make things better for the community. I'd buy Samsung devices til the day I'm too old to make calls if they did that.
donalgodon said:
Try a kernel with Boeffla Sound Engine in it. There are kernels for AOSP/CM ROMs and stock ROMs, so be careful which one you choose. Quite a few folks are including the Engine in their kernel.
More is NOT better when it comes to sound improvements. The best things that Boeffla does is allow you to clean up the signal noise considerably on CM/AOSP kernels which is introduced by the terrible incomplete and/or non-existent sources that Samdung provided to the OpenSource community devs.
Keep the settings at a minimum and tread lightly when adjusting. I've found that this engine allows me to enjoy CM for the first time in the way I've always wanted. I just could not stomach the difference between the signal source sound from stock to CM kernels, but Boeffla makes it tolerable, not by just masking it with "more bass" or gimmicks like "Beats" does, but by actually tuning the FLL on the chip and cleaning up the signal through oversampling, etc.
It works pretty darn well. Close to stock, actually. Very close. It's been a real treat for me, because I had given up on custom kernels and ROMs because of the sound issues they bring, so I feel the pain. I'm a musician, and I have an ear for this stuff, from a studio perspective, and I'd encourage you to check it out. If the kernel dev doesn't include it, the Sound Control won't work, so you just need to check.
The Wolfson DAC in the S3 really is superb. It's a shame that Samdung refuses to share userspace sources to make things better for the community. I'd buy Samsung devices til the day I'm too old to make calls if they did that.
Click to expand...
Click to collapse
I'll give this a try, thanks!
it worked for me! BIG thanks
Currently I have I9100XXMS2 JB4.1.2 Android Baltic version installed on my phone (I9100). Audio quality (compared to CM10.1) is terrible on this kernel. I would like to ask if it is possible to install custom(better) kernel for this stock android JB. Also, if it is possible, maybe you can recommend kernel, which is, you think, the best when it comes listening to music.
There isn't one. The SQ on the SGS2 is limited by the ****ty Yamaha DAC. The best you can do is bump the volume up using a Siyah based kernel which gives the music more 'fullness', through headphones at least.
MistahBungle said:
There isn't one. The SQ on the SGS2 is limited by the ****ty Yamaha DAC. The best you can do is bump the volume up using a Siyah based kernel which gives the music more 'fullness', through headphones at least.
Click to expand...
Click to collapse
I am talking about rom/kernel issues, not hardware issues. When I had cm10.1 installed, music was fine, equalizers worked great, they improved quality of music very well. Now even equalizers are not able to make sure that the sound is the same or better as it was by using cm10.1.
Xplay off playstore is my choice of player. Good for quality of sound used with dori or siyah just make it even better. Loud and clear.
alliance 7.3
apollo 4.5 extreme v2
I9100
I've never noticed any difference whatsoever with various kernels & roms. A few music apps seem to have very slightly different sound signatures/qualities, but the variances are very slight (and may well even be imaginary). I think the differences people hear are down to changes in their headphones/earphones (and the cables, particularly in the case of IEM's) over time or even changes to their ears (wax, possibly other factors).
Having said that, I used Poweramp for 9 mths, then switched to Neutron for the last 3 mths I used my SGS2 as a music player (I don't anymore). I thought Neutron had a slightly 'cleaner' sound through 5 different IEM's, but as I said, that might have been my imagination/what I was wanting to hear.
alliance 7.3
apollo 4.5 extreme v2
I9100
I have been playing with various roms for s2, but the difference in sound quality found on stock is far more superior than the CM based roms.
specially in headphones. 7.1 preset equalizer setting works best on stock roms.
is it due to libs? or some other reason?
had any one faced the same difference?
cooolrider195 said:
I have been playing with various roms for s2, but the difference in sound quality found on stock is far more superior than the CM based roms.
specially in headphones. 7.1 preset equalizer setting works best on stock roms.
is it due to libs? or some other reason?
had any one faced the same difference?
Click to expand...
Click to collapse
So far, I am experiencing the exact opposite. The sound quality on Custom ROMs are way better. Check out Pimp My ROM, its a app that tunes everything on your phone including sound quality to the max.
Credits to Pimp My ROM developer.
Sent from my GT-I9100 using xda premium
You're both imagining it.
Hey guys I have a few questions in my mind that I would like to ask. Firstly what has been disturbing me is that AC!D Incredible bass is not working on CM or any AOSP ROM. I find it really sad because this has brought me the best sound experience ever with any 4.3 ROM with Boeffla kernel flashed.
The sound experience V4A brings me in CM is far less good than what I had experienced with V 4.3 Android ROM (Boeffla Kernel Flash) + AC!D Incredible Bass. So, right now I am finding it so hard to stay in a ROM, CM and AOSP have the performance I need but the music experience is less good in my Beats Earphone whereas the stock performance is so-so and the Music is simply "heavens".
.The problem I am facing is that when I flash the AC!D Incredible Bass in CM, no audio file is playable. It starts you cannot hear any sound and it automatically stops/pauses. This is really frustrating I've tried tons and tons of ROMs and tons of combinations. I really hope I can find a ROM perfect at my taste and needs.
Thank you,
Shiw
Miui roms speaker sound is...tinny and using viper4android will almost not make any difference in this case.... I keep switching form CM to Miui back and forth because of this.
Viper on CM will give me real bass and awesome speaker quality in general and I really wanna get that on stock rom.
So, what files should I copy or what can it be done about it?
Sam.1211 said:
Miui roms speaker sound is...tinny and using viper4android will almost not make any difference in this case.... I keep switching form CM to Miui back and forth because of this.
Viper on CM will give me real bass and awesome speaker quality in general and I really wanna get that on stock rom.
So, what files should I copy or what can it be done about it?
Click to expand...
Click to collapse
this happens because of cm libs and because left speaker on cm doesn't work so it comes out very loud from only right speaker but quality is better on MIUI ROM
i recommend using miui for best sound
but using one of these sound mods search xda
divine beats
extreme aural maximizer
XTREMEMUSIC (v.7.1 latest versions in both cm and miui give bootloop)
dissidius said:
this happens because of cm libs and because left speaker on cm doesn't work so it comes out very loud from only right speaker but quality is better on MIUI ROM
i recommend using miui for best sound
but using one of these sound mods search xda
divine beats
extreme aural maximizer
XTREMEMUSIC (v.7.1 latest versions in both cm and miui give bootloop)
Click to expand...
Click to collapse
The single channel output should not be a problem on a mono speaker unless there is a problem with the sound input, for example a recording on left channel only will give me no sound at all but this is more preferable than tiny sound that gets even lower and/or disorted when you mess with the eq. Dolby stuff is BS on a mono speaker.
I guess is there a way to make stock rom sound louder from the driver itself, NOT preamplification stuff?
I had a Moto G 2014 (RIP) and the stock sound was sooo bad even with its stereo speakers. Faux sound +4 levels and heavy viper4android eq made it almost pleasant.