Has anyone ad any luck with a Visual Lands Prestige 7? My coworker gave it to me to see if I could get it unbricked. I can't seem to do it. It just gets stuck trying to boot up. I have tried a couple of other write ups around the internet, but can't seem to make it work. Any help guys?
which tablet
provide
+model no
+cpu
etc
S€Nd fRoM A15 "beast out of boX"
ss429842 said:
which tablet
provide
+model no
+cpu
etc
S€Nd fRoM A15 "beast out of boX"
Click to expand...
Click to collapse
Visual Lands Prestige 7
Model: ME-107-8Gb-WHT
Thats about all I can tell.
http://www.tabletroms.com/forums/prestige-7/6034-visual-land-prestige-7-firmware.html
this link should help you
S€Nd fRoM A15 "beast out of boX"
ss429842;4079
this link should help you
S€Nd fRoM A15 "beast out of boX"[/QUOTE said:
I have tried that way. If I try it with 2.3 I get error code 162, If I try it with 4.03 I get error code 120, and if I try it with 4.04 it gets to 20% and fails with error code 163
Click to expand...
Click to collapse
KrayZie801 said:
Has anyone ad any luck with a Visual Lands Prestige 7? My coworker gave it to me to see if I could get it unbricked. I can't seem to do it. It just gets stuck trying to boot up. I have tried a couple of other write ups around the internet, but can't seem to make it work. Any help guys?
Click to expand...
Click to collapse
flash a new ROM that is compatible with your gadget !!
http://www.tabletroms.com/forums/vi...s-flashing-problem-a10-tablets.html#post78937
S€Nd fRoM A15 "beast out of boX"
unbricked tool
KrayZie801 said:
Has anyone ad any luck with a Visual Lands Prestige 7? My coworker gave it to me to see if I could get it unbricked. I can't seem to do it. It just gets stuck trying to boot up. I have tried a couple of other write ups around the internet, but can't seem to make it work. Any help guys?
Click to expand...
Click to collapse
I was turn on to this from a friend that is a IT at a major company it call [Aurora_II_Unbrick_Kit_2.0 ] it works .I all so fund it on a torrent site.email me for link or just google the name of with torrent after
Sir try to get your tablet official firmware of your device and flash accordingly
if u had issue i just found on eBay fixing bricked deice you can check it if it works...
http://www.ebay.in/itm/251327978286?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
BRICKED 7inch Irola Tablet...PLEASE HELP
I am in DIRE need of some help with my tablet. I received this irola dx752 tablet bricked and cannot fix it for the life of me. I am able to hold power and volume up and get into recovery system version 4.2.01. I Have tried a factory reset and a wipe system cache and the tablet just reboots to the green robot with and exclamation mark. If I press volume up, it brings me back to the system recovery. Now i am not very versed in ADB but I tried to sideload just about every firmware I could find for an a13 allwinner a8 cortex 7inch tablet, since the irola website has taken down its firmware. Also, fastboot will not work on this tablet whatsoever (it just says waiting for device) when i enter any command. I have never seen this tablet boot into a rom of any kind and therefore cannot tell if USB Debugging was ever enabled. I also Have tried different drivers but the one that seem to hold is the Android ADB Interface. CAN ANYONE PLEASE GIVE ME SOME SUGGESTIONS OR SOME HELP? It would be greatly appreciated. Thank you.
Do you by any chance have a copy of the firmware, the links in this thread are dead now probably because there years old, I have the same tablet, stuck on boot screen.. please
Related
Hey folks. I have a Karbonn A21, which I rooted yesterday. I was trying to get the Swapper 2 application to work. The phone rebooted once and now all it says is 'Entry QPST Download'. No other screens are accessible. Any help will be appreciated.
Same issue with Spice Mi-425
nickfury91 said:
Hey folks. I have a Karbonn A21, which I rooted yesterday. I was trying to get the Swapper 2 application to work. The phone rebooted once and now all it says is 'Entry QPST Download'. No other screens are accessible. Any help will be appreciated.
Click to expand...
Click to collapse
I've same issue with Spice Stellar Mi-425. its giving me "Entry QPST Download" message. but i never tried to root or do something like that. The phone got stuck or hanged and when i restarted manually (by removing battery) its giving this message. no idea what to do. i googled but didn't find any solution. Pls help...
I have the same problem with CM flame 2
anoopes said:
I've same issue with Spice Stellar Mi-425. its giving me "Entry QPST Download" message. but i never tried to root or do something like that. The phone got stuck or hanged and when i restarted manually (by removing battery) its giving this message. no idea what to do. i googled but didn't find any solution. Pls help...
Click to expand...
Click to collapse
I have the Cherry Mobile Flame 2 and after changing my boot animation file to the jelly bean Easter egg, my phone would not boot, only stuck with floating jelly beans. I then used the recovery (red screen) and messed things up and probably wiped/formatted the partitions. now I just get the screen... ENTRY QPST DOWNLOAD
I found a post from FB that gives step by step instruction with pics as well as drivers and the partition image, but my internet is so slow that I'm still waiting the program to download so that I can try it. while waiting my CM Flame 2 battery went dead and it don't charge while bricked... so im also waiting to get loaned a universal charger. Anyways search FB for How to fix ENTRY QPST DOWNLOAD post.....
hope this works and if anyone out there has any other thoughts, plz let me know Thanks
Can anyone help me with my T10.
I flashed the firmware Hyundai_T10_20130402 (which I have downloaded from various sites/blogs) but
although the flashing completes succesfully,
after the automatic reboot the tablet never turn on.
There is no way to boot the device.
The only thing possible is to enter again into Update Mode and try to reflash
but the result is the same.
If anyone has used before another firmware than the 20130402, please inform me.
Hyundai T10 bricked
Niccon said:
Can anyone help me with my T10.
I flashed the firmware Hyundai_T10_20130402 (which I have downloaded from various sites/blogs) but
although the flashing completes succesfully,
after the automatic reboot the tablet never turn on.
There is no way to boot the device.
The only thing possible is to enter again into Update Mode and try to reflash
but the result is the same.
If anyone has used before another firmware than the 20130402, please inform me.
Click to expand...
Click to collapse
Hello,
I have exactly the same problem with the same firmware: flashed and my T10 went dead. Can somebody help, please?
Luiker said:
Hello,
I have exactly the same problem with the same firmware: flashed and my T10 went dead. Can somebody help, please?
Click to expand...
Click to collapse
try Reset Button ? I flash my T10 today and the firmware Hyundai_T10_20130402 is ok.
already tried...
adsawin said:
try Reset Button ? I flash my T10 today and the firmware Hyundai_T10_20130402 is ok.
Click to expand...
Click to collapse
Hi,
I already tried the reset pin, doesn't help unfortunately. The tablet still charge, but when disconnected from power it stays warm like the processor is still doing something. Of course nothing on the screen, no sign of life.
I have a question: how did you update exactely your T10? Especially what kind of message did you get while updating? and what happens when the update is finished?
thanks for the help anyway.
T10 unbricked
Luiker said:
Hi,
I already tried the reset pin, doesn't help unfortunately. The tablet still charge, but when disconnected from power it stays warm like the processor is still doing something. Of course nothing on the screen, no sign of life.
I have a question: how did you update exactely your T10? Especially what kind of message did you get while updating? and what happens when the update is finished?
thanks for the help anyway.
Click to expand...
Click to collapse
Hi all,
I solved the issue by
- waiting for a complete battery drain.
- putting the FW on a brand new 2GB microSD (no formatting).
- plugging the power on the tablet. Wait for 10-15mn.
- then starting the update sequence (pressing "Volume -" and "power" for few seconds.
suddenly the update message started, and the FW was flashed correctly! I'm using the tablet again and happy with it (except the GPS, doesn't work!)
I hope this might help somebody out there.
Good luck
Get Better Hyundai T10 in aliexpress in safe way!!
Thanks so much!
Get Better Hyundai T10 in aliexpress in safe way!
search Hyundai T10 in aliexpress, you will know!
Luiker said:
Hi all,
I solved the issue by
- waiting for a complete battery drain.
- putting the FW on a brand new 2GB microSD (no formatting).
- plugging the power on the tablet. Wait for 10-15mn.
- then starting the update sequence (pressing "Volume -" and "power" for few seconds.
suddenly the update message started, and the FW was flashed correctly! I'm using the tablet again and happy with it (except the GPS, doesn't work!)
I hope this might help somebody out there.
Good luck
Click to expand...
Click to collapse
Is there any stable firmware for hyundai t10 tablet.
If you click on software update .does it find update ?
I have an Impression i10A-LE tablet that won't bootup. When powering on the device, I get the "Leader" logo, followed by the "Impression" logo a few seconds later. The screen gets stuck on the logo.
I've tried just about every key combination that I've found others mentioning online and NONE of them get me to a recovery screen.
Does anybody have any ideas how I can restore this tablet to factory and/or re-flash it?
has anyone unbricked the leader impression i10a-le,because ive tried everything out there,for the past 2-3mounths and still
im bricked. so if anyone has been successful with the i10a-le pleeessss us know about it. thanks . I wanted to know if anyone with i10a-le had a copy of the update.zip 230mb that came up when u went to settings,about,update. If so i would really appreciate a copy.
I went to there website to try and get assistance ,but its either down or gone altogether.So any help would be very helpful. thanks.
Hello guys! I am very new here. I hope you can help me by any chance. As stated on the title itself I got a Lenovo ideapad K1 getting error such Unrecoverable Bootloader Error (0x0000004). This how it happens before I get the error.
I was currently running Kaschemme's custom rom for lenovo k1, CM10.1(android 4.2.2). I have this tablet where the physical home key is faulty I have read from some Lenovo k1 thread how to fix it. Then tried the method then it worked. The next morning, I used the K1 and its a bit acting up and started lagging then hang's up. I do a force shutdown then tried the method again to make the home key work while booting up until it reaches the homescreen then instatntly hung up. This happened 3x and I used the same previous method every time a boot up the tablet. For that 3rd time it never reached the homescreen I had a series of hanging at the Cyanogen boot animation and did a force shutdown and never tried using the method to make the home key work. After these series of hanging and force shutdown at the bootanimation, now it only boots up until the Lenovo logo and never passed that logo. After that I decided to reinstall Kaschemme's CM10.1 for lenovo k1 by entering to APX mode then when installing and everything was successful waited for my tablet to reboot but NO REBOOT happened, but instead I got the aforementioned error. I even tried to reinstall that same ROM and even, AOSP JB by Khanning, HC stock, HC rooted rom for Lenovo K1 and no luck at all.
Untill now I can't figure out what had just happened and how and why I got that silly error. Hope you guys, Lenovo k1 users especially , can help me specially to Kaschemme who did very good job in supporting the lenovo K1 users.
THANKS in advance
Just in case in the future I might be able to solve this or somebody out there will be kind to help with my problem with my Lenovo k1
Just tonight, I tried to install the ROM CM10.1 by Kashchemme as soon as it reached the last .img to fully installed and before the device should reboot I tried to force shutdown before I see the ERROR message again. When I turned it on it immediatly went to APX mode without pressing the 2 volume buttons together with the power button. I tried to force shutdown it for 3 times and it always went to APX mode. Tried to install Rooted HC by Khanning, it reaches the last .img (userdata.img) to be installed successfully but still no luck and I got the additional information
failed executing command 25 NvError 0x120002
command failure: sync failed <bad data>
bootloader status: Bct Write Failed <code: 22> message: nverror:0x42004 <0x42004
> flags: 0
Pleae help what do these things mean and how can I recover my tablet. Is Jtag possible? how to JTAG this lenovo k1? please anybody share your knowledge. Thanks
My LENOVO K1 is finally alive and working after so many attempts
Just an update
Right after my recent post tried to reboot my tablet. It boots up. The Lenovo Logo showed again and it proceeds and showed the NVIDIA logo then after that another Lenovo logo until it reaches the homescreen. Finally my tablet is FInally ALIVE so happy that I saved my old ROM's which brought my tablet back to life.
Now I don't know if I am running the rooted one or not because I don't see the SUPERUSER app on this HC rooted by Khanning.
If anyone of you might have the same problem with your LENOVO K1 try the way I did. Just read my previous posts. If you have any question that I might able to help jut let me know.
LONG LIVE ANDROID!!!!!
I am having the same issue, while trying to flash Kaschemme's CM10.1 i got the "unrecoverable bootloader error (0x00000004). could you tell me where you got the version of HC that you were able to get running?
trackid said:
I am having the same issue, while trying to flash Kaschemme's CM10.1 i got the "unrecoverable bootloader error (0x00000004). could you tell me where you got the version of HC that you were able to get running?
Click to expand...
Click to collapse
Look for the thread created by Kastella. Another K1 user. I post the link there. Sorry I can't post the link now just using my phone to reply. Hope you understand
Sent from my MT27i using XDA Premium HD app
trackid said:
I am having the same issue, while trying to flash Kaschemme's CM10.1 i got the "unrecoverable bootloader error (0x00000004). could you tell me where you got the version of HC that you were able to get running?
Click to expand...
Click to collapse
Here is the link to that thread
http://forum.xda-developers.com/showthread.php?t=2575775
Sent from my MT27i using XDA Premium HD app
Btw, which ROM where you using before you attempted to flash CM10,1?
Sent from my MT27i using XDA Premium HD app
Thanks, I cant remember exactly which one it was since i flashed it over a year ago, but it was a jellybean Rom made by Khanning.
How to solve the issue?
johnwilliam_a_k_a_trash said:
Hello guys! I am very new here. I hope you can help me by any chance. As stated on the title itself I got a Lenovo ideapad K1 getting error such Unrecoverable Bootloader Error (0x0000004). This how it happens before I get the error.
I was currently running Kaschemme's custom rom for lenovo k1, CM10.1(android 4.2.2). I have this tablet where the physical home key is faulty I have read from some Lenovo k1 thread how to fix it. Then tried the method then it worked. The next morning, I used the K1 and its a bit acting up and started lagging then hang's up. I do a force shutdown then tried the method again to make the home key work while booting up until it reaches the homescreen then instatntly hung up. This happened 3x and I used the same previous method every time a boot up the tablet. For that 3rd time it never reached the homescreen I had a series of hanging at the Cyanogen boot animation and did a force shutdown and never tried using the method to make the home key work. After these series of hanging and force shutdown at the bootanimation, now it only boots up until the Lenovo logo and never passed that logo. After that I decided to reinstall Kaschemme's CM10.1 for lenovo k1 by entering to APX mode then when installing and everything was successful waited for my tablet to reboot but NO REBOOT happened, but instead I got the aforementioned error. I even tried to reinstall that same ROM and even, AOSP JB by Khanning, HC stock, HC rooted rom for Lenovo K1 and no luck at all.
Untill now I can't figure out what had just happened and how and why I got that silly error. Hope you guys, Lenovo k1 users especially , can help me specially to Kaschemme who did very good job in supporting the lenovo K1 users.
THANKS in advance
Click to expand...
Click to collapse
Hi,
I have faced the same problem of Unrecoverable Bootloader Error (0x0000004) with exactly the same situation. However I can't find your way to solve the issue. Could you please teach me the way of solution?
Thanks!
seananyoung said:
Hi,
I have faced the same problem of Unrecoverable Bootloader Error (0x0000004) with exactly the same situation. However I can't find your way to solve the issue. Could you please teach me the way of solution?
Thanks!
Click to expand...
Click to collapse
I think it was just a storke of luck. Because right now after several times of attempt I upgrade my K1 to Kaschemme's Rom my K1 always get bricked. I did it for about 7 times of reviving back to HC. Now my tablet is totally useless. I even tried to do the bake technique but still having error I might try it as well on Sunday. Just keep on pushing the HC and you will able to revive it soon. Good luck.
Sent from my GT-I9500 using XDA Premium HD app
Hi I have an Allwinner A10 clone (Kurio 7), it is designed for kids but otherwise a standard android tablet.
After hours of googling I rooted and installed CWM & Gapps (not included in the stock ROM). So far so good.
The stock ROM was causing issues with some apps, it needed to go.
I flashed CM10 and it worked but no touch screen. It needed a compatibility flash to make it work. You can guess what's coming. I picked the wrong one and now the device does the following:
Reboot loop
Black screen (backlight though)
PWR+Vol up no longer gets to recovery
Vibrates constantly between reboots (due to wrong patch I'm guessing)
ADB picks up the device for a split second between reboots but "adb reboot recovery" does nothing. Even when using wait command.
Tried "fastboot flash recovery cwm.img" after wait command, no luck.
Is there anything else I can try?
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Turzyx said:
I fixed this.
I used the GoClever TAB A73 ROM and instructions in their support/update/download area.
Sorry I cannot post links as I am still a newbie.
Anyway flashing using Livesuit this fixed the problem.
Click to expand...
Click to collapse
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
lamkc said:
Hi, can you please share with me how you manage to unbrick your Kurio 7. I had just bricked mine trying to install CM10.
Thanks.
Click to expand...
Click to collapse
I guess this is the site he is refering to:
http://www.goclever.com/uk/support,c3/software-update,a28.html?aic=5&aia=185&ail=10
The LiveSuit pack is there for download, as well as the roms.
But there are three different 4.0 roms to choose from, and also a couple of 2.3 roms. I dont know which one he did use.
Since your Kurio 7 is bricked anyway, I guess you can try one by one and see if any of them work.
Please tell which one, if you succeed.