Can anyone help me with my T10.
I flashed the firmware Hyundai_T10_20130402 (which I have downloaded from various sites/blogs) but
although the flashing completes succesfully,
after the automatic reboot the tablet never turn on.
There is no way to boot the device.
The only thing possible is to enter again into Update Mode and try to reflash
but the result is the same.
If anyone has used before another firmware than the 20130402, please inform me.
Hyundai T10 bricked
Niccon said:
Can anyone help me with my T10.
I flashed the firmware Hyundai_T10_20130402 (which I have downloaded from various sites/blogs) but
although the flashing completes succesfully,
after the automatic reboot the tablet never turn on.
There is no way to boot the device.
The only thing possible is to enter again into Update Mode and try to reflash
but the result is the same.
If anyone has used before another firmware than the 20130402, please inform me.
Click to expand...
Click to collapse
Hello,
I have exactly the same problem with the same firmware: flashed and my T10 went dead. Can somebody help, please?
Luiker said:
Hello,
I have exactly the same problem with the same firmware: flashed and my T10 went dead. Can somebody help, please?
Click to expand...
Click to collapse
try Reset Button ? I flash my T10 today and the firmware Hyundai_T10_20130402 is ok.
already tried...
adsawin said:
try Reset Button ? I flash my T10 today and the firmware Hyundai_T10_20130402 is ok.
Click to expand...
Click to collapse
Hi,
I already tried the reset pin, doesn't help unfortunately. The tablet still charge, but when disconnected from power it stays warm like the processor is still doing something. Of course nothing on the screen, no sign of life.
I have a question: how did you update exactely your T10? Especially what kind of message did you get while updating? and what happens when the update is finished?
thanks for the help anyway.
T10 unbricked
Luiker said:
Hi,
I already tried the reset pin, doesn't help unfortunately. The tablet still charge, but when disconnected from power it stays warm like the processor is still doing something. Of course nothing on the screen, no sign of life.
I have a question: how did you update exactely your T10? Especially what kind of message did you get while updating? and what happens when the update is finished?
thanks for the help anyway.
Click to expand...
Click to collapse
Hi all,
I solved the issue by
- waiting for a complete battery drain.
- putting the FW on a brand new 2GB microSD (no formatting).
- plugging the power on the tablet. Wait for 10-15mn.
- then starting the update sequence (pressing "Volume -" and "power" for few seconds.
suddenly the update message started, and the FW was flashed correctly! I'm using the tablet again and happy with it (except the GPS, doesn't work!)
I hope this might help somebody out there.
Good luck
Get Better Hyundai T10 in aliexpress in safe way!!
Thanks so much!
Get Better Hyundai T10 in aliexpress in safe way!
search Hyundai T10 in aliexpress, you will know!
Luiker said:
Hi all,
I solved the issue by
- waiting for a complete battery drain.
- putting the FW on a brand new 2GB microSD (no formatting).
- plugging the power on the tablet. Wait for 10-15mn.
- then starting the update sequence (pressing "Volume -" and "power" for few seconds.
suddenly the update message started, and the FW was flashed correctly! I'm using the tablet again and happy with it (except the GPS, doesn't work!)
I hope this might help somebody out there.
Good luck
Click to expand...
Click to collapse
Is there any stable firmware for hyundai t10 tablet.
If you click on software update .does it find update ?
Related
Hi,
When updating an insertion of a tablet of hyundai t10 - the screen more tablet went out on anything doesn't react.
If to connect the charger, the indicator charging (lamp) lights up. reset didn't help.
How it is possibly to recover it?
I so understand that bootloader was damaged.
try the following...
dergyn said:
Hi,
When updating an insertion of a tablet of hyundai t10 - the screen more tablet went out on anything doesn't react.
If to connect the charger, the indicator charging (lamp) lights up. reset didn't help.
How it is possibly to recover it?
I so understand that bootloader was damaged.
Click to expand...
Click to collapse
Hi,
I just unbricked my T10 a week or so ago. See details in this thread: http://forum.xda-developers.com/showthread.php?t=2307107
I think it should work in your case as well.
good luck
Hello guys, i need little help with my phone, so here is what happened: Two days ago i tried to turn on my phone, it started booting but the cycle repeated again and again so I got in recovery and wiped data/catche, but that didn`t helped. I thought that if i change the rom maybe I can fix the problem so I downloaded my rom from needrom (there were 2 roms for my device) and started flashing with Flash tool. I downloaded the first rom to my phone and tried to turn the phone on but nothing happened.. I downloaded the second rom and it worked, the phone booted but the only think that I can see is blank white screen, the touch is working and the buttons, when i click somewhere i feel the device vibrating but thats it. One time i managed to make the device appear in my computer as a normal android phone, dont know how this happened. So can someone help me please, if you have a phone like mine can you backup your rom and send it to me or help me find a working one, or some idea how to fix the blank screen. Thanks in advance
someone :/
t0shko0 said:
someone :/
Click to expand...
Click to collapse
I`m really desperate :X . I thought about porting other android from similiar MKT device but how can I do that when i don`t have a working one.
t0shko0 said:
Hello guys, i need little help with my phone, so here is what happened: Two days ago i tried to turn on my phone, it started booting but the cycle repeated again and again so I got in recovery and wiped data/catche, but that didn`t helped. I thought that if i change the rom maybe I can fix the problem so I downloaded my rom from needrom (there were 2 roms for my device) and started flashing with Flash tool. I downloaded the first rom to my phone and tried to turn the phone on but nothing happened.. I downloaded the second rom and it worked, the phone booted but the only think that I can see is blank white screen, the touch is working and the buttons, when i click somewhere i feel the device vibrating but thats it. One time i managed to make the device appear in my computer as a normal android phone, dont know how this happened. So can someone help me please, if you have a phone like mine can you backup your rom and send it to me or help me find a working one, or some idea how to fix the blank screen. Thanks in advance
Click to expand...
Click to collapse
Same problem with me.
I downloaded the rom from NEEDROM.COM.
chery22 said:
Same problem with me.
I downloaded the rom from NEEDROM.COM.
Click to expand...
Click to collapse
Have the same problem. I also downloaded the rom from Needrom.com and after installing the software I have a white screen and unable to use the device. Anybody solved already this matter? Help would be very much appreciated. Thanks.
PitNaw said:
Have the same problem. I also downloaded the rom from Needrom.com and after installing the software I have a white screen and unable to use the device. Anybody solved already this matter? Help would be very much appreciated. Thanks.
Click to expand...
Click to collapse
me to
has anybody a original ROM for the N800+?
Hello everyone. This is a long story, so thanks in advance to read it and try to help me.
I've got a Trekastor surftab Ventos 8.0 this one --> http://www.trekstor.de/detalles-de-surftabs/product/272.html?file=tl_files/generatedPdf/272-de.pdf
model st80208-2 . I'm not sure if it is the 8 or 16 GB. And I don't know how to check it because the tablet is bricked.
How did I brick the tab?
This is a good question. I had lost the charger and I tried with another one with a higher voltage. This ruined the batery. And when I found the charger the tablet show a strange behaviour. It was trying to start but reboot before to finish. I was able to finish a full boot but the batery only works for a few minutes. After solve the batery problem, now I can start the tablet without problem about the voltage but, it seems like all this failed attemps to boot have made some damage somewhere.
What I have now?
The tablet start. It show's the trekstor logo. After that it show's the android logo, and that's all. It stuck's looping in the android logo.
What I have tried?
Everything.
1.- Custom recovery. http://forum.xda-developers.com/showthread.php?t=2039964 or this http://forum.xda-developers.com/showthread.php?t=1995984
This method not working in my tablet even when it was not bricked. (I tried it, when I was trying to get root access a month ago).
Power + Volumen (-) gets nothing at all. It's start normally. (and loop in my currently situation)
Power + Volumen (+) gets this screen http://cdn.howtogeek.com/wp-content/uploads/2012/12/android-recovery-mode.jpg and anything happens no matter what button I'm pressing even with the custom recovery in the sdcard.
2.- I tried to flash the tablet, but I didn't find information about how to do it and trust me, I have searched a lot.
I triend with this software: "Amlogic Image Burning Tool v.1.6.2.2" and this firmware http://forum.xda-developers.com/showthread.php?t=2039964 . But I get the error "find no upgrade config, please load it manually". I'm pretty sure I doing something wrong, but I have no experience with this software or flashing in general.
That's all for now I'm tired of reading this forum and this other one in german. (thanks to google translator) http://www.android-hilfe.de/surftab-ventos-8-0-forum/ and I did not find anything useful for me
You people are my only hope. (Any Star wars fan in the room?:laugh:
So any help would be wonderful, thanks in advance and sorry for my mistakes, english is no my mother language.
Hey techs, seriously in need of your precious help and suggestions!
I went to flash stock firmware on my Moto e and it was successful.After my phone successfully booted I saw a software update notification and I downloaded the update!
But the problem arose when I clicked on install update button...A few minutes later my phone screen went black.I tried to boot Into recovery but I couldn't!
Neither of the key combination are working and my phone is totally unresponsive!
When I plug into charging only the battery notification LED lightens but nothing happens on screen!
Plz help me friends!
Try force rebooting, press and hold power button for 30+ seconds.
This will delete all the data in your phone and will restart. Let me know if its working or I'll provide some other solutions.
Sent from my Potato 21 years ago
Did u try updating from 4.4.2 to later ?
Daman5202 said:
Try force rebooting, press and hold power button for 30+ seconds.
This will delete all the data in your phone and will restart. Let me know if its working or I'll provide some other solutions.
Click to expand...
Click to collapse
Brother I tried even this and all other possible key combination but got no response from device :'(
Ujwal Agrawal said:
Did u try updating from 4.4.2 to later ?
Click to expand...
Click to collapse
Yes after firmware flashing stock 4.4.2 I got an update for 4.4.4 and after installing update screen my phone went blank!
mama_thakur said:
Yes after firmware flashing stock 4.4.2 I got an update for 4.4.4 and after installing update screen my phone went blank!
Click to expand...
Click to collapse
So sorry bro. It's bricked. There already a thread which says not to update from 4.4.2.
Contact Mobileunbrick.com they may help you!
An unbrick method is being developed by devs on XDA, do wait and try those to unbrick it
mama_thakur said:
Brother I tried even this and all other possible key combination but got no response from device :'(
Click to expand...
Click to collapse
@mama_thakur and all those who are facing Moto E problems, have a look at my XDA DevDB Project: Unbrick hard bricked Motorola Moto E - Aravind V. Nair (XDA)
I have a FAQ, and some things which I'm making along with some troubleshooting steps which might be of help to all those who are facing issues.
Dear Friends,
My Elephone S7 4gb+64GB keep scrolling through boot mode options from up to down. no button is working during this condition except Power Off option.
It Only Turns ON when USB cable is connected to PC.
Otherwise Its Totally dead and can not be turned ON with any combination of Buttons.
I have flashed it with every Stock ROM available on needrom forums. along with Recovery as well.
Nothing worked.
P Lease help.
Best Regards
Maozay Saleem
I have the same problem :crying: someone whit a solution pleaaaas
Was there ever a solution to this please? (I know it's a really old thread but I can't find anything else on this exact problem)
Kerri2602 said:
Was there ever a solution to this please? (I know it's a really old thread but I can't find anything else on this exact problem)
Click to expand...
Click to collapse
Same for me. Doesn´t have anybody a solution yet?
I just could solve the boot error for some weeks after doing a factory reset over the chinese mode until the faillure came up again.
So i resetted it again but this time either this didn´t help.