Hyundai T10 isn't started - Android Q&A, Help & Troubleshooting

Hi,
When updating an insertion of a tablet of hyundai t10 - the screen more tablet went out on anything doesn't react.
If to connect the charger, the indicator charging (lamp) lights up. reset didn't help.
How it is possibly to recover it?
I so understand that bootloader was damaged.

try the following...
dergyn said:
Hi,
When updating an insertion of a tablet of hyundai t10 - the screen more tablet went out on anything doesn't react.
If to connect the charger, the indicator charging (lamp) lights up. reset didn't help.
How it is possibly to recover it?
I so understand that bootloader was damaged.
Click to expand...
Click to collapse
Hi,
I just unbricked my T10 a week or so ago. See details in this thread: http://forum.xda-developers.com/showthread.php?t=2307107
I think it should work in your case as well.
good luck

Related

Help Me! GoClever Tab R75 Won't Boot Up

Hello Guys. (Sorry for my english)
I have a goclever tab R75 tablet.
So..the problem is that I was Rooting my tablet with root that I found on this site and everything was going well, I checked the status on the rooting and it was done updating and it was checking the software. after few minutes it pops up with the "Goclever Android 4.0 onboard" screen, And my Tablet is stuck there!.. I can turn it off but this screen just comes everytime!
I Have tried to reset with the little hole on the back - didn't work
I Have tried to boot up on the sd cars - didn't work
So please help me someone if somebody can !

[Q] Hyundai T10 firmware

Can anyone help me with my T10.
I flashed the firmware Hyundai_T10_20130402 (which I have downloaded from various sites/blogs) but
although the flashing completes succesfully,
after the automatic reboot the tablet never turn on.
There is no way to boot the device.
The only thing possible is to enter again into Update Mode and try to reflash
but the result is the same.
If anyone has used before another firmware than the 20130402, please inform me.
Hyundai T10 bricked
Niccon said:
Can anyone help me with my T10.
I flashed the firmware Hyundai_T10_20130402 (which I have downloaded from various sites/blogs) but
although the flashing completes succesfully,
after the automatic reboot the tablet never turn on.
There is no way to boot the device.
The only thing possible is to enter again into Update Mode and try to reflash
but the result is the same.
If anyone has used before another firmware than the 20130402, please inform me.
Click to expand...
Click to collapse
Hello,
I have exactly the same problem with the same firmware: flashed and my T10 went dead. Can somebody help, please?
Luiker said:
Hello,
I have exactly the same problem with the same firmware: flashed and my T10 went dead. Can somebody help, please?
Click to expand...
Click to collapse
try Reset Button ? I flash my T10 today and the firmware Hyundai_T10_20130402 is ok.
already tried...
adsawin said:
try Reset Button ? I flash my T10 today and the firmware Hyundai_T10_20130402 is ok.
Click to expand...
Click to collapse
Hi,
I already tried the reset pin, doesn't help unfortunately. The tablet still charge, but when disconnected from power it stays warm like the processor is still doing something. Of course nothing on the screen, no sign of life.
I have a question: how did you update exactely your T10? Especially what kind of message did you get while updating? and what happens when the update is finished?
thanks for the help anyway.
T10 unbricked
Luiker said:
Hi,
I already tried the reset pin, doesn't help unfortunately. The tablet still charge, but when disconnected from power it stays warm like the processor is still doing something. Of course nothing on the screen, no sign of life.
I have a question: how did you update exactely your T10? Especially what kind of message did you get while updating? and what happens when the update is finished?
thanks for the help anyway.
Click to expand...
Click to collapse
Hi all,
I solved the issue by
- waiting for a complete battery drain.
- putting the FW on a brand new 2GB microSD (no formatting).
- plugging the power on the tablet. Wait for 10-15mn.
- then starting the update sequence (pressing "Volume -" and "power" for few seconds.
suddenly the update message started, and the FW was flashed correctly! I'm using the tablet again and happy with it (except the GPS, doesn't work!)
I hope this might help somebody out there.
Good luck
Get Better Hyundai T10 in aliexpress in safe way!!
Thanks so much!
Get Better Hyundai T10 in aliexpress in safe way!
search Hyundai T10 in aliexpress, you will know!
Luiker said:
Hi all,
I solved the issue by
- waiting for a complete battery drain.
- putting the FW on a brand new 2GB microSD (no formatting).
- plugging the power on the tablet. Wait for 10-15mn.
- then starting the update sequence (pressing "Volume -" and "power" for few seconds.
suddenly the update message started, and the FW was flashed correctly! I'm using the tablet again and happy with it (except the GPS, doesn't work!)
I hope this might help somebody out there.
Good luck
Click to expand...
Click to collapse
Is there any stable firmware for hyundai t10 tablet.
If you click on software update .does it find update ?

[Q] [NEED HELP!] My phone was gone black

Today my Lenovo P780 8GB Was freeze at home screen
and went black I can't turn it on anymore
can't soft reset too
please help I used only official ROM and never root my device.
FielderKnight said:
Today my Lenovo P780 8GB Was freeze at home screen
and went black I can't turn it on anymore
can't soft reset too
please help I used only official ROM and never root my device.
Click to expand...
Click to collapse
Hi. First you must describe your phone:
- when is produced
- what rom do you used(if you are 100% that your rom was stock).
Judging what you sad here it seems to me that your preloader was messed up.
Try to reflash your preloader only and see what is going on !

Prestigio multipad 7.0 hd+ (PMP3870C_DUO)

Hi! I have this tablet and it's not working
He fell on floor and when i try to power up just logo appears and nothing. (the art hi-tech logo).
I have tried to do hard reset but tablet not reacting.
Cant find official ROM online. Is there way to flash new firmware? Somehow over USB cable or SD card?
djuka1988 said:
Hi! I have this tablet and it's not working
He fell on floor and when i try to power up just logo appears and nothing. (the art hi-tech logo).
I have tried to do hard reset but tablet not reacting.
Cant find official ROM online. Is there way to flash new firmware? Somehow over USB cable or SD card?
Click to expand...
Click to collapse
lol did you manage to find anything? I am also looking for firmware.

[Q&A] Blu Life 8 l280a MT6592 Hard brick, Respond to Flash but still Dead

Hi, i have a Blu Life 8 (MT6592) and this is my story...
After an apparently soft brick that endend in a Infinite Black Screen Bootlog i tried to make a Format with SP flash tool (that was idiot by my part, without any meeting of this) and now a i have a FULL HARD BRICKED PHONE NO FAKE 4K...
But i have the hope of you guys can help me.
The phone doesn't turn on, when i connect the usb cable it doesn't seems like if charging or nothing, apparently dead no?... Well this is the magic thing, when i try to Flash again the Stock ROM it Works!... yes, i looks like if doing something, complete the progress bar of flashing and says it's "OK" but really doesn't nothing, still not boot, no charging log, no blu logo, no android logo... What you think?

Categories

Resources