[Q] [NEED HELP!] My phone was gone black - Lenovo P780

Today my Lenovo P780 8GB Was freeze at home screen
and went black I can't turn it on anymore
can't soft reset too
please help I used only official ROM and never root my device.

FielderKnight said:
Today my Lenovo P780 8GB Was freeze at home screen
and went black I can't turn it on anymore
can't soft reset too
please help I used only official ROM and never root my device.
Click to expand...
Click to collapse
Hi. First you must describe your phone:
- when is produced
- what rom do you used(if you are 100% that your rom was stock).
Judging what you sad here it seems to me that your preloader was messed up.
Try to reflash your preloader only and see what is going on !

Related

[Q] Hyundai T10 firmware

Can anyone help me with my T10.
I flashed the firmware Hyundai_T10_20130402 (which I have downloaded from various sites/blogs) but
although the flashing completes succesfully,
after the automatic reboot the tablet never turn on.
There is no way to boot the device.
The only thing possible is to enter again into Update Mode and try to reflash
but the result is the same.
If anyone has used before another firmware than the 20130402, please inform me.
Hyundai T10 bricked
Niccon said:
Can anyone help me with my T10.
I flashed the firmware Hyundai_T10_20130402 (which I have downloaded from various sites/blogs) but
although the flashing completes succesfully,
after the automatic reboot the tablet never turn on.
There is no way to boot the device.
The only thing possible is to enter again into Update Mode and try to reflash
but the result is the same.
If anyone has used before another firmware than the 20130402, please inform me.
Click to expand...
Click to collapse
Hello,
I have exactly the same problem with the same firmware: flashed and my T10 went dead. Can somebody help, please?
Luiker said:
Hello,
I have exactly the same problem with the same firmware: flashed and my T10 went dead. Can somebody help, please?
Click to expand...
Click to collapse
try Reset Button ? I flash my T10 today and the firmware Hyundai_T10_20130402 is ok.
already tried...
adsawin said:
try Reset Button ? I flash my T10 today and the firmware Hyundai_T10_20130402 is ok.
Click to expand...
Click to collapse
Hi,
I already tried the reset pin, doesn't help unfortunately. The tablet still charge, but when disconnected from power it stays warm like the processor is still doing something. Of course nothing on the screen, no sign of life.
I have a question: how did you update exactely your T10? Especially what kind of message did you get while updating? and what happens when the update is finished?
thanks for the help anyway.
T10 unbricked
Luiker said:
Hi,
I already tried the reset pin, doesn't help unfortunately. The tablet still charge, but when disconnected from power it stays warm like the processor is still doing something. Of course nothing on the screen, no sign of life.
I have a question: how did you update exactely your T10? Especially what kind of message did you get while updating? and what happens when the update is finished?
thanks for the help anyway.
Click to expand...
Click to collapse
Hi all,
I solved the issue by
- waiting for a complete battery drain.
- putting the FW on a brand new 2GB microSD (no formatting).
- plugging the power on the tablet. Wait for 10-15mn.
- then starting the update sequence (pressing "Volume -" and "power" for few seconds.
suddenly the update message started, and the FW was flashed correctly! I'm using the tablet again and happy with it (except the GPS, doesn't work!)
I hope this might help somebody out there.
Good luck
Get Better Hyundai T10 in aliexpress in safe way!!
Thanks so much!
Get Better Hyundai T10 in aliexpress in safe way!
search Hyundai T10 in aliexpress, you will know!
Luiker said:
Hi all,
I solved the issue by
- waiting for a complete battery drain.
- putting the FW on a brand new 2GB microSD (no formatting).
- plugging the power on the tablet. Wait for 10-15mn.
- then starting the update sequence (pressing "Volume -" and "power" for few seconds.
suddenly the update message started, and the FW was flashed correctly! I'm using the tablet again and happy with it (except the GPS, doesn't work!)
I hope this might help somebody out there.
Good luck
Click to expand...
Click to collapse
Is there any stable firmware for hyundai t10 tablet.
If you click on software update .does it find update ?

[Q] Star n800+ after rom flash shows only white screen

Hello guys, i need little help with my phone, so here is what happened: Two days ago i tried to turn on my phone, it started booting but the cycle repeated again and again so I got in recovery and wiped data/catche, but that didn`t helped. I thought that if i change the rom maybe I can fix the problem so I downloaded my rom from needrom (there were 2 roms for my device) and started flashing with Flash tool. I downloaded the first rom to my phone and tried to turn the phone on but nothing happened.. I downloaded the second rom and it worked, the phone booted but the only think that I can see is blank white screen, the touch is working and the buttons, when i click somewhere i feel the device vibrating but thats it. One time i managed to make the device appear in my computer as a normal android phone, dont know how this happened. So can someone help me please, if you have a phone like mine can you backup your rom and send it to me or help me find a working one, or some idea how to fix the blank screen. Thanks in advance
someone :/
t0shko0 said:
someone :/
Click to expand...
Click to collapse
I`m really desperate :X . I thought about porting other android from similiar MKT device but how can I do that when i don`t have a working one.
t0shko0 said:
Hello guys, i need little help with my phone, so here is what happened: Two days ago i tried to turn on my phone, it started booting but the cycle repeated again and again so I got in recovery and wiped data/catche, but that didn`t helped. I thought that if i change the rom maybe I can fix the problem so I downloaded my rom from needrom (there were 2 roms for my device) and started flashing with Flash tool. I downloaded the first rom to my phone and tried to turn the phone on but nothing happened.. I downloaded the second rom and it worked, the phone booted but the only think that I can see is blank white screen, the touch is working and the buttons, when i click somewhere i feel the device vibrating but thats it. One time i managed to make the device appear in my computer as a normal android phone, dont know how this happened. So can someone help me please, if you have a phone like mine can you backup your rom and send it to me or help me find a working one, or some idea how to fix the blank screen. Thanks in advance
Click to expand...
Click to collapse
Same problem with me.
I downloaded the rom from NEEDROM.COM.
chery22 said:
Same problem with me.
I downloaded the rom from NEEDROM.COM.
Click to expand...
Click to collapse
Have the same problem. I also downloaded the rom from Needrom.com and after installing the software I have a white screen and unable to use the device. Anybody solved already this matter? Help would be very much appreciated. Thanks.
PitNaw said:
Have the same problem. I also downloaded the rom from Needrom.com and after installing the software I have a white screen and unable to use the device. Anybody solved already this matter? Help would be very much appreciated. Thanks.
Click to expand...
Click to collapse
me to
has anybody a original ROM for the N800+?

[Q] Screen lock error : Unfortunately lenovo lock screen has stopped

Dear,
Hi,
I am vicky, i purchased my P780 in Jan 14, since then it was working flawlessly till last night when somehow i lost my focus and installed Chinese theme centre of Lenovo, from where i downloaded few themes for my Lenovo P780, after applying one of the themes and troubles started, there is an error msg appeared " unfortunately, Lenovo Lock Screen has stopped" after pressing ok the msg kept coming endlessly. it is not disappearing. however when i connected my phone to laptop it was detected immediately, and there are no problem in charging as well.
please help as i am not too much into the technical knowhow of the smartphone(android). but i tried to go to factory reset by pressing power+vol key after some time it shows that the phone is in meta mode, long press power and normal"
Thanks in advance.
vickey
vicksleen said:
Dear,
Hi,
I am vicky, i purchased my P780 in Jan 14, since then it was working flawlessly till last night when somehow i lost my focus and installed Chinese theme centre of Lenovo, from where i downloaded few themes for my Lenovo P780, after applying one of the themes and troubles started, there is an error msg appeared " unfortunately, Lenovo Lock Screen has stopped" after pressing ok the msg kept coming endlessly. it is not disappearing. however when i connected my phone to laptop it was detected immediately, and there are no problem in charging as well.
please help as i am not too much into the technical knowhow of the smartphone(android). but i tried to go to factory reset by pressing power+vol key after some time it shows that the phone is in meta mode, long press power and normal"
Thanks in advance.
vickey
Click to expand...
Click to collapse
Look at the message i send you and the post !
PM me if you dont succeed !
hi, i am experiencing the same problem with my lenovo S820. i downloaded a theme from the chinese theme center and when i applied the theme the same pop ups appear and there's no way for me to access my phone. do i have to do a reset from the safe mode? thanks.
matryoshkaaa said:
hi, i am experiencing the same problem with my lenovo S820. i downloaded a theme from the chinese theme center and when i applied the theme the same pop ups appear and there's no way for me to access my phone. do i have to do a reset from the safe mode? thanks.
Click to expand...
Click to collapse
Factory reset. This is what you must do.
Good luck.
Sent from my Lenovo P780
Hi,
I also face same problem. How to factory reset? or other method to solve the problem?
Thank you in advance.
Regards
stympy said:
Factory reset. This is what you must do.
Good luck.
Sent from my Lenovo P780
Click to expand...
Click to collapse
tedsuya said:
Hi,
I also face same problem. How to factory reset? or other method to solve the problem?
Thank you in advance.
Regards
Click to expand...
Click to collapse
A factory reset must be done from settings or from recovery(stock or custom like TWRP).
If you cannot acces setings in your Android you could do factory reset from recovery.
To enter or acces recovery you must do: power off your phone. Start yout phone with volume+ volume - and power buttons pressed all together.
Once entered in recovery you must do wipe. NOT ADVANCE WIPE.
Good Luck.

Lenovo A6000 Screen black flickering after unbricking

I had recently upgraded my Lenovo A6000 to the Lollypop upgrade. However the phone kept getting slower until yesterday when the screen kept flickering and the phone failed to restart. I have tried unbricking the phone by following the instructions given in the other thread by installing the firmware file (1.2GB) on the phone, but no joy. After that i tried the unbricking using the Lenovo Downloader V1.2 , the download was success. However on doing the CWM recovery the screen does not display anything but it only flickers a black background. In this stage if i touch the screen or menu buttons, the vibration response comes. The phone is also being detected by PC as Lenovo A6000 and i can access both Internal memory and SD card from my PC. However no joy with the black flickering display.
Please help urgently.
Plz reply
I had given this phone to a local mobile reapir center but after 10 days he came up with the reply that this may be an issue with the processor and he can not repair it. Please help
derian1234 said:
I had recently upgraded my Lenovo A6000 to the Lollypop upgrade. However the phone kept getting slower until yesterday when the screen kept flickering and the phone failed to restart. I have tried unbricking the phone by following the instructions given in the other thread by installing the firmware file (1.2GB) on the phone, but no joy. After that i tried the unbricking using the Lenovo Downloader V1.2 , the download was success. However on doing the CWM recovery the screen does not display anything but it only flickers a black background. In this stage if i touch the screen or menu buttons, the vibration response comes. The phone is also being detected by PC as Lenovo A6000 and i can access both Internal memory and SD card from my PC. However no joy with the black flickering display.
Please help urgently.
Click to expand...
Click to collapse
If ur mob has warranty simply give it to them or maybe ur display is gone I think

Lenovo tab 2 A10-70F stuck at boot screen

Yesterday My lenovo Tab 2 A10-70F rebooted for no reason and is now stuck at the lenovo boot logo. What I have tried so far is going into recovery and doing a factory reset and wipe cache. This allows the tablet to boot up and be set up as new. However once the tablet is set up and I reboot again it is back stuck at the lenovo screen until I factory reset it again. I have also tried removing the SD card in case that was causing an issue but still no luck. I did another thing called root integrity check which checked out.
I have never rooted or modified the software in any way. It is bone stock android 6.0 from lenovo
Lenovo tab 2 A10-70f stuck at boot screen- fixed!
mikee286 said:
Yesterday My lenovo Tab 2 A10-70F rebooted for no reason and is now stuck at the lenovo boot logo. What I have tried so far is going into recovery and doing a factory reset and wipe cache. This allows the tablet to boot up and be set up as new. However once the tablet is set up and I reboot again it is back stuck at the lenovo screen until I factory reset it again. I have also tried removing the SD card in case that was causing an issue but still no luck. I did another thing called root integrity check which checked out.
I have never rooted or modified the software in any way. It is bone stock android 6.0 from lenovo
Click to expand...
Click to collapse
Sorry, I know it's an old post.
Hello. Complete noobie here. I've also experienced the stuck at boot screen on my Lenovo TAB 2 A10-70f that I've managed to fix. Firstly, a big thank you to the xda team for providing a wealth of information!
After attempting to use many ROMS provided by links, something wasn't right as the layout and bootscreen was different. The camera didn't work and downloaded videos would not play. The original boot screen was a small rectangular orange box with Lenovo written in it. The ROMS I tried that eventually booted after 8 hours of waiting was in large print, but I digress.
The ROM I installed was a Russian ROM. This is in English and, after an update (took another several hours to complete) is now the original Android 6.0. This is now exactly how it came out of the box. I used the SPFlashTool, unchecked the bootloader option and flashed the ROM. Two updates and all is well. I almost threw the towel in, convinced myself it was a emmc chip issue and started shopping around for a replacement. Glad I didn't.
If i'm allowed to, I'll provide a link to the Russian ROM.

Categories

Resources