Lenovo A6000 Screen black flickering after unbricking - Android Q&A, Help & Troubleshooting

I had recently upgraded my Lenovo A6000 to the Lollypop upgrade. However the phone kept getting slower until yesterday when the screen kept flickering and the phone failed to restart. I have tried unbricking the phone by following the instructions given in the other thread by installing the firmware file (1.2GB) on the phone, but no joy. After that i tried the unbricking using the Lenovo Downloader V1.2 , the download was success. However on doing the CWM recovery the screen does not display anything but it only flickers a black background. In this stage if i touch the screen or menu buttons, the vibration response comes. The phone is also being detected by PC as Lenovo A6000 and i can access both Internal memory and SD card from my PC. However no joy with the black flickering display.
Please help urgently.

Plz reply
I had given this phone to a local mobile reapir center but after 10 days he came up with the reply that this may be an issue with the processor and he can not repair it. Please help
derian1234 said:
I had recently upgraded my Lenovo A6000 to the Lollypop upgrade. However the phone kept getting slower until yesterday when the screen kept flickering and the phone failed to restart. I have tried unbricking the phone by following the instructions given in the other thread by installing the firmware file (1.2GB) on the phone, but no joy. After that i tried the unbricking using the Lenovo Downloader V1.2 , the download was success. However on doing the CWM recovery the screen does not display anything but it only flickers a black background. In this stage if i touch the screen or menu buttons, the vibration response comes. The phone is also being detected by PC as Lenovo A6000 and i can access both Internal memory and SD card from my PC. However no joy with the black flickering display.
Please help urgently.
Click to expand...
Click to collapse

If ur mob has warranty simply give it to them or maybe ur display is gone I think

Related

[Q] [NEED HELP!] My phone was gone black

Today my Lenovo P780 8GB Was freeze at home screen
and went black I can't turn it on anymore
can't soft reset too
please help I used only official ROM and never root my device.
FielderKnight said:
Today my Lenovo P780 8GB Was freeze at home screen
and went black I can't turn it on anymore
can't soft reset too
please help I used only official ROM and never root my device.
Click to expand...
Click to collapse
Hi. First you must describe your phone:
- when is produced
- what rom do you used(if you are 100% that your rom was stock).
Judging what you sad here it seems to me that your preloader was messed up.
Try to reflash your preloader only and see what is going on !

Lenovo S90C MTK6582- Bricked After Flashing ROM

[Q] Lenovo S90C - Bricked - Need Help
Hello !
I have Lenovo S90C (fake obviously) MTK6582 Octa Core 4G RAM (or so it was said on AliExpress. I just recently discovered that's not true) DoubleSIM and almost none of ROM (I could only install about 5 apps. I couldn't even make backup with MtkDroidTools etc. and modify the EBR Files, because there's not enough space for backup, it didn't work even if I tried with SD card).
Then I found a ROM on the internet where it was written in the comments that it suits my smart phone. So I tried to flash it on with SP FlashTool. And now my phone is bricked. At first it showed some coloured stripes and vibrated at the startup, but it never booted. I couldn't even get it to the recovery mode.
To this point, computer recognized the phone when it was connected. So I tried to flash a ROM again. From this attempt on, it doesn't work at all. It's totally bricked. I can not turn it on, go to the recovery mode, enter boot menu, nothing. Even computer doesn't recognize it.
Link to ROM I tried: needrom.com/download/alps-k500/
Link to phone I bought: aliexpress.com/snapshot/6662334714.html?orderId=67204220302389
So my question is; could you guys help me with getting the right ROM, with sufficient amount of internal storage.. I would also be grateful if you would help me with un-bricking the phone. I can't even get to the kernel boot menu, computer won't recognize it even with all the drivers installed and that concerns me a lot.
I would need it ASAP. Thank you all! :good:
I think you need a YunOS rom

Please help on fixing the micromax canvas a190 hd plus

My phone got affected with malware and very slow unusable, i flashed it with stock rom using sp tool and all went successful. When i turned on the device the startup logo was scrambled and i can see like the display as a broken one. I am sure no physical damage to the display. The android stock rom 25.06.14 used from the below link. Someone please suggest how to fix this issue, i can hear the booting sound but the display is showing in lines and touch is responsive and changing colors. Experts please help on flashing properly and overcome this display problem.
httpfirmwarefile.commicromax-a190

Cubot X9 help?

Hey people i'm a new member in need of some help flashing my Cubot x9. Everything was fine until 2 days ago when all of a sudden i got a black screen and couldn't for the life of me get it to boot up again, so the next day i plugged it into my laptop and got the sound to say that it was detected but still no activity on the phone/screen i used SPflash tools to download the scatter file and finally got it to start without losing any data but i get errors from numerous apps and if i try to open file manager or settings it instantly closes so any advice or help would be appreciated :good: I've also tried installing the stock v18 rom from recovery mode but it says failed then i have to repeat the scatter file process to boot again

My phone is cramping

hello
I made a mistake by installing Rom on my phone umidigi a5 pro
I chose Format All + Download in sp flash tool by mistake and did not notice it until the end of the process and now my phone is away from the problem of IMEI it does not accept putting a lock to it and it cramps most of the time with a black screen appears, I cannot do anything until I restart it and the same process is returned
please anyone can help me
HidsonQ said:
hello
I made a mistake by installing Rom on my phone umidigi a5 pro
I chose Format All + Download in sp flash tool by mistake and did not notice it until the end of the process and now my phone is away from the problem of IMEI it does not accept putting a lock to it and it cramps most of the time with a black screen appears, I cannot do anything until I restart it and the same process is returned
please anyone can help me
Click to expand...
Click to collapse
Hi there,
Unfortunately I cannot help you with that problem as I'm not experimented enough with umidigi phone (that are more and more common around here). But I though a little response would be enough to warm your sad heart.
Also could you clarify what's going on with your IMEI?
Also, you double posted this question, let me ask @xanthrax for help with that
Here is the double one:
https://forum.xda-developers.com/android/help/phone-cramping-t4110453
Hello,
Thanks for your reply
As for IMEI, I fixed it, it remained a problem. The phone no longer accepts lock mode and when I lock the screen and open it again the phone stops working with a black screen until I restart it and some applications do not work
Any help @xanthrax !? please

Categories

Resources