hello
I made a mistake by installing Rom on my phone umidigi a5 pro
I chose Format All + Download in sp flash tool by mistake and did not notice it until the end of the process and now my phone is away from the problem of IMEI it does not accept putting a lock to it and it cramps most of the time with a black screen appears, I cannot do anything until I restart it and the same process is returned
please anyone can help me
HidsonQ said:
hello
I made a mistake by installing Rom on my phone umidigi a5 pro
I chose Format All + Download in sp flash tool by mistake and did not notice it until the end of the process and now my phone is away from the problem of IMEI it does not accept putting a lock to it and it cramps most of the time with a black screen appears, I cannot do anything until I restart it and the same process is returned
please anyone can help me
Click to expand...
Click to collapse
Hi there,
Unfortunately I cannot help you with that problem as I'm not experimented enough with umidigi phone (that are more and more common around here). But I though a little response would be enough to warm your sad heart.
Also could you clarify what's going on with your IMEI?
Also, you double posted this question, let me ask @xanthrax for help with that
Here is the double one:
https://forum.xda-developers.com/android/help/phone-cramping-t4110453
Hello,
Thanks for your reply
As for IMEI, I fixed it, it remained a problem. The phone no longer accepts lock mode and when I lock the screen and open it again the phone stops working with a black screen until I restart it and some applications do not work
Any help @xanthrax !? please
Related
Hello thanks for dropping by on my thread.
Please do help me to unbrick my tablet it's Kata T2 (Fish Tablet).
I've been reading through google for 5hours unfortunately didn't had any best results.
So maybe someone here or if there are any alternative steps to unbrick my tablet that you would recommend. Please do give advice or suggestion.
The problem is I have a "lying android with red triangle logo".
Tried to wipe data & wipe cache and everytime I do a reboot the fish logo appear (default logo) and proceed again to the lying android logo. Could you help me what to do?
If you're asking for a "backup" thing. the answer is NO.I don't have those.. And you might ask for the stock ROM too .. the answer is NO..
So please help me with this.. Thanks!..
same here
i also have a problem with kata t2. i rooted it with vroot then after it rebooted. the logo comes out but after that the screen goes to black. i know its turned on because i can see the light in the lcd but the problem is it wont reboot normally. i have tried to go to recovery mode data erased it to factory setting even deleted the cache but the problem still remains it wont boot normally and stays in black screen. if somebody would help us it will greatly appreciated. :good:
PS: i ask them if they can provide a stock firmware and the answer is they cant. any tips on how can i get it to boot back to normal? the stock firmware by the way is 4.1.1 jellybean... Happy new year
just return go to the nearest service center... i have also bricked mine and said to the technician some lies (virus) . trust me they dont know that you bricked it becauese of rooting it... maybe they just dont care..
Join the Kata T2 group in facebook.. they might help you there..
hey i found a new way to unbrick your kata t2. havnt tried it yet but try it!
1. turn off your kata t2
2. press power button and volume down until kata logo (fish) comes out
3. press again power button and volume down you will see the android logo with exclamation point
4. press power button and volume UP and you will go to recovery.... there you would find recover system from back up. click on it.
Just a suggestion ^_^
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
hellow sir..one day I held samsung gt-I9500 mtk6577 aka clone/super copy with condition only show digital clock on home screen but sometime I can access to setting and turn debugging checklist and no access at all to drawer app..so I decide to make a backup using mtk droidtool and flash the backup rom again but still no luck.. I try to clear emmc, create & install CWM wipe dalvik/restore still no luck..and so I search rom to the nearest spec with the 1 I get..any way I'm finally get some back up rom somewhere and flash it with SP_Flash_Tool_v3.1224.01..and binggo the phone back again but leave another problem which is camera won't start and the lock screen not responding..so I start to search rom again and got it from kaskus website..rom is completly more like samsung original phone ...right now the phone is fine except the lock screen..when the phone is start from off I can slide/swipe the screen lock I can touch the entire screen/app drawer , but when the screen goes off then I press the power button to actived the lock screen does'nt responding at all..it really annoying me, I have to pull bat and put it again and switch on again...is there any i that have the same situation or have solution for this? because I really don't have a clue about scrip at all..so please provide me with some guide.. THANX in Advance
Comment
nedinoval said:
hellow sir..one day I held samsung gt-I9500 mtk6577 aka clone/super copy with condition only show digital clock on home screen but sometime I can access to setting and turn debugging checklist and no access at all to drawer app..so I decide to make a backup using mtk droidtool and flash the backup rom again but still no luck.. I try to clear emmc, create & install CWM wipe dalvik/restore still no luck..and so I search rom to the nearest spec with the 1 I get..any way I'm finally get some back up rom somewhere and flash it with SP_Flash_Tool_v3.1224.01..and binggo the phone back again but leave another problem which is camera won't start and the lock screen not responding..so I start to search rom again and got it from kaskus website..rom is completly more like samsung original phone ...right now the phone is fine except the lock screen..when the phone is start from off I can slide/swipe the screen lock I can touch the entire screen/app drawer , but when the screen goes off then I press the power button to actived the lock screen does'nt responding at all..it really annoying me, I have to pull bat and put it again and switch on again...is there any i that have the same situation or have solution for this? because I really don't have a clue about scrip at all..so please provide me with some guide.. THANX in Advance
Click to expand...
Click to collapse
The information you have supplied cannot help anyone to offer any useful advise. You will need to specify the number of cores, that is, single, dual or more; screen resolution. You will need to try Micromax A110 ROMs or Lava Iris 501. Good luck.
here is another information about the phone form cpu z app..I really hope some one will give advise how to fix the problem
SOLVED
problem solved..it's a hardware/touch screen error solution change touchsreen and good again :angel::angel:
THREAD CLOSED
Hello everyone , today i received a notification from lenovo that there is a new lenovo firmware update , i got so excited and i pressed ddownload buytton then it said that u can brick our device because this phone is rooted , so i unrooted the device completly and downloaded the firmware update wheni pressed the install button it restarted to the recover and showed an android toy laying down and the software upgrade percentage as a bar on the android phone screen, i thaught its normal and then it showed a little text under android logo that said "error" i thaught its just a normal failure and i will now just start the phone to normal mode and when i realised its been a lot of time phone is not turning on , found out im stuck at the bootloop, now i dont know how to ubrick it plz help, ill be thankful to you, plz repl and help now before it's battery dies and becomes dead phone. plz tell me a quick way to fix that ive tried to factory reset via recovery mode i am only able to visit the recovery screen my phone is unrooted, and i can also connect it to pc, plz tell me how to flash stock firmware
,EDITED : NOW I CANT turn on my device it is not turning on,now im unable to go to recover manu all i can do is when i connect it to my pc i hear a sound from my computer that something is connected and i cant turn on it's screen i tried all types of key combinations i cant turn it on plzzzzz help. Anyone?
not bricked
alihassan1397 said:
Hello everyone , today i received a notification from lenovo that there is a new lenovo firmware update , i got so excited and i pressed ddownload buytton then it said that u can brick our device because this phone is rooted , so i unrooted the device completly and downloaded the firmware update wheni pressed the install button it restarted to the recover and showed an android toy laying down and the software upgrade percentage as a bar on the android phone screen, i thaught its normal and then it showed a little text under android logo that said "error" i thaught its just a normal failure and i will now just start the phone to normal mode and when i realised its been a lot of time phone is not turning on , found out im stuck at the bootloop, now i dont know how to ubrick it plz help, ill be thankful to you, plz repl and help now before it's battery dies and becomes dead phone. plz tell me a quick way to fix that ive tried to factory reset via recovery mode i am only able to visit the recovery screen my phone is unrooted, and i can also connect it to pc, plz tell me how to flash stock firmware
,EDITED : NOW I CANT turn on my device it is not turning on,now im unable to go to recover manu all i can do is when i connect it to my pc i hear a sound from my computer that something is connected and i cant turn on it's screen i tried all types of key combinations i cant turn it on plzzzzz help. Anyone?
Click to expand...
Click to collapse
hey there ,sorry for the late reply ,but i just read the question .
if you can log into bootloop then your phone isn't really bricked .
can you get into the recovery ? if so ,you should just delete the cash and the delvic cash and reboot .you'll be able to get out of bootloop .
amr elfiky said:
hey there ,sorry for the late reply ,but i just read the question .
if you can log into bootloop then your phone isn't really bricked .
can you get into the recovery ? if so ,you should just delete the cash and the delvic cash and reboot .you'll be able to get out of bootloop .
Click to expand...
Click to collapse
hey buddy, mine is somewhat similar but i did hard reset and cleared cache partitions but when i try to switch it on, still says no command. any help please,.
you can reach me at [email protected]
thanks in advanced!
kasmotsadamori said:
hey buddy, mine is somewhat similar but i did hard reset and cleared cache partitions but when i try to switch it on, still says no command. any help please,.
you can reach me at [email protected]
thanks in advanced!
Click to expand...
Click to collapse
what do you mean it says no command. ? can you please elaborate ?
Same problem to me, need help
http://ainotech.com/how-to-flash-lenovo-a5000-receive-root-custom-recovery/
It worked for me now my phone is working better then it was before , I think it will work for you too,
Hello after trying to use SPFLASH TOOL to flash my device because i had logo screen loop i end up formating everything and now my phone doesn't start but if i plug in to my computer i can hear the sound of plug in and out, i can still use spflash tool but i have black screen on my phone so i'm here asking for someone to help me find a way to fix this, do i have to build a new rom or system? Just tell me what to do because after Searching the whole internet after my phone i can't find much stuff.
Any help would be appreciated.
What phone model is it bro?
Sorry for not answering in time bro but i finally fixed my phone i had to reinstall like re-flash the entire phone.
My phone is a Qilive Q4 |7 auchan but i already fixed my problem i had trouble finding the stock rom for it since qilive aparently doesn't have any kind of support page but lucky that i found it.
Thanks anyway.