hellow sir..one day I held samsung gt-I9500 mtk6577 aka clone/super copy with condition only show digital clock on home screen but sometime I can access to setting and turn debugging checklist and no access at all to drawer app..so I decide to make a backup using mtk droidtool and flash the backup rom again but still no luck.. I try to clear emmc, create & install CWM wipe dalvik/restore still no luck..and so I search rom to the nearest spec with the 1 I get..any way I'm finally get some back up rom somewhere and flash it with SP_Flash_Tool_v3.1224.01..and binggo the phone back again but leave another problem which is camera won't start and the lock screen not responding..so I start to search rom again and got it from kaskus website..rom is completly more like samsung original phone ...right now the phone is fine except the lock screen..when the phone is start from off I can slide/swipe the screen lock I can touch the entire screen/app drawer , but when the screen goes off then I press the power button to actived the lock screen does'nt responding at all..it really annoying me, I have to pull bat and put it again and switch on again...is there any i that have the same situation or have solution for this? because I really don't have a clue about scrip at all..so please provide me with some guide.. THANX in Advance
Comment
nedinoval said:
hellow sir..one day I held samsung gt-I9500 mtk6577 aka clone/super copy with condition only show digital clock on home screen but sometime I can access to setting and turn debugging checklist and no access at all to drawer app..so I decide to make a backup using mtk droidtool and flash the backup rom again but still no luck.. I try to clear emmc, create & install CWM wipe dalvik/restore still no luck..and so I search rom to the nearest spec with the 1 I get..any way I'm finally get some back up rom somewhere and flash it with SP_Flash_Tool_v3.1224.01..and binggo the phone back again but leave another problem which is camera won't start and the lock screen not responding..so I start to search rom again and got it from kaskus website..rom is completly more like samsung original phone ...right now the phone is fine except the lock screen..when the phone is start from off I can slide/swipe the screen lock I can touch the entire screen/app drawer , but when the screen goes off then I press the power button to actived the lock screen does'nt responding at all..it really annoying me, I have to pull bat and put it again and switch on again...is there any i that have the same situation or have solution for this? because I really don't have a clue about scrip at all..so please provide me with some guide.. THANX in Advance
Click to expand...
Click to collapse
The information you have supplied cannot help anyone to offer any useful advise. You will need to specify the number of cores, that is, single, dual or more; screen resolution. You will need to try Micromax A110 ROMs or Lava Iris 501. Good luck.
here is another information about the phone form cpu z app..I really hope some one will give advise how to fix the problem
SOLVED
problem solved..it's a hardware/touch screen error solution change touchsreen and good again :angel::angel:
THREAD CLOSED
Related
Hello everyone !
Sorry for my bad english
I just bough my Galaxy Tab 10.1 , and after about 5 hours been using it , the Screen doesn't respond anymore , i already Re-start the Tab and also try a recovery to Swipe all my data back to Zero , but no luck , My tab stuck on the main screen and can't unlock the Main menu , can someone help me Please ?
Thank You In Advance .
Press and hold Power + Volume Down until you see the Robot.
Release the buttons immediately you the Robot, then press Volume Down to move the flashing cursor to CWM mode (box with arrow).
Press Volume Up to select the mode and do a complete wipe.
Hello yqed and thank for your help .
I already did that and still have the issue , stuck on the Main Screen and cannot go foward , No respond at all , but i can feel the vibration , but do you have another solution ?
Thanks !
What do you mean Main Screen... can you swipe the circle, or you have a PIN setup and cannot enter it because the tablet does not respond?
Did you do anything to the tablet, ROM install through Odin, rooting, TouchWiz update, etc?
Hi !
Yes , i cannot Swipe the circle , i didn't do anything in particular before the issue , but flash the Tab to see if it's gonna solve the problem with the Stock Rom [ EUR ] , from this -> Thread <- , but no luck till now , the rotation working also .
You have this issue. This was my reply. I know is not funny for you but, I laughed when I saw the video... I hope you did not dropped the tablet into your toiled bowl.
Anyways, this is a good place to look for the issue. Did you played with the kernel or rooted the tablet? Or it was a bone stock when this occurred... Did you updated to TouchWiz using Kies?
Hi !
No , i didn't do anything to the Tab , just left it for about 30 min , when i came back the Screen doesn't respond anymore , i already saw the Youtube videos , i guess the only solution is to send back My Tablet , Thank for your help
Hi,
I am newbie to this forum and also this is my first smartphone...but if given instructions i can definately follow....I have got this new micromax ninja 4 which is great phone but due to ram constraints on the phone i rooted it yesterday and to clear the phone i removed couple of micromax applications after that phone doesnt recognise the sim card and keep getting message like dialer storage stopped responding core.android stopped respnding.....things i have tried to fix....
done factory reset from recovery console..wiped cache as well nogo...removed root uninstaller as well still the same...please help in installing factory image of the phone so i wud root it again and wud delete cautiously...any suggestion or help wud be appreciated...
Regards
Sandeep
phone struck at boot logo...need help
wsminsandeeppa said:
Hi,
I am newbie to this forum and also this is my first smartphone...but if given instructions i can definately follow....I have got this new micromax ninja 4 which is great phone but due to ram constraints on the phone i rooted it yesterday and to clear the phone i removed couple of micromax applications after that phone doesnt recognise the sim card and keep getting message like dialer storage stopped responding core.android stopped respnding.....things i have tried to fix....
done factory reset from recovery console..wiped cache as well nogo...removed root uninstaller as well still the same...please help in installing factory image of the phone so i wud root it again and wud delete cautiously...any suggestion or help wud be appreciated...
Regards
Sandeep
Click to expand...
Click to collapse
hi sandeep,
i am also new here,learnt that you usedrecovery console in this handset....can you please explain me how to take the phone to recovery console....my phone is struck at boot logo...so need to take it to recory console....i would be at a great relief if i can take the phone to recory console....awaitng yours reply....
thanks in advance
Hi sure just shut down the phone n then press the volume up key n power on button together til u see first screen n it will go to recovery console
How to flash stock A87 ROM
Only in case you bricked your phone
Incase if you bricked your phone or made some serious changes and cant revert back or some kind of malfunction happened and you’re worried, no need to worry from now on. We have stock a87 rom which is the original os shipped with Micromax devices.
Just download this file and copy it to sdcard
Then turn off ur phone.
Now press up volume + power button until u see micromax logo.
Then u will enter the recovery mode ,there by using the volume rocker select the apply update.
From the sdcard and press power button ,now select yes and press power button again.
After sometime you will see successful message.
Now select reboot.
Thats all your phone is back to stock rom shipped from micromax.
Download stock a87
Just Copy Paste This link (Sorry I Cant Paste the Link Hear Because I am also new to this form so download attatchment)
Dear All,
I have started this thread:
Link
Kindly contribute, share and explain.
We can help and built a community like I have done for Karbonn & Spice mobiles.
Without help from all members its not possible.
Thanks for reading.
amigo83 said:
hi sandeep,
i am also new here,learnt that you usedrecovery console in this handset....can you please explain me how to take the phone to recovery console....my phone is struck at boot logo...so need to take it to recory console....i would be at a great relief if i can take the phone to recory console....awaitng yours reply....
thanks in advance
Click to expand...
Click to collapse
whats the phone's chipset?
Hello thanks for dropping by on my thread.
Please do help me to unbrick my tablet it's Kata T2 (Fish Tablet).
I've been reading through google for 5hours unfortunately didn't had any best results.
So maybe someone here or if there are any alternative steps to unbrick my tablet that you would recommend. Please do give advice or suggestion.
The problem is I have a "lying android with red triangle logo".
Tried to wipe data & wipe cache and everytime I do a reboot the fish logo appear (default logo) and proceed again to the lying android logo. Could you help me what to do?
If you're asking for a "backup" thing. the answer is NO.I don't have those.. And you might ask for the stock ROM too .. the answer is NO..
So please help me with this.. Thanks!..
same here
i also have a problem with kata t2. i rooted it with vroot then after it rebooted. the logo comes out but after that the screen goes to black. i know its turned on because i can see the light in the lcd but the problem is it wont reboot normally. i have tried to go to recovery mode data erased it to factory setting even deleted the cache but the problem still remains it wont boot normally and stays in black screen. if somebody would help us it will greatly appreciated. :good:
PS: i ask them if they can provide a stock firmware and the answer is they cant. any tips on how can i get it to boot back to normal? the stock firmware by the way is 4.1.1 jellybean... Happy new year
just return go to the nearest service center... i have also bricked mine and said to the technician some lies (virus) . trust me they dont know that you bricked it becauese of rooting it... maybe they just dont care..
Join the Kata T2 group in facebook.. they might help you there..
hey i found a new way to unbrick your kata t2. havnt tried it yet but try it!
1. turn off your kata t2
2. press power button and volume down until kata logo (fish) comes out
3. press again power button and volume down you will see the android logo with exclamation point
4. press power button and volume UP and you will go to recovery.... there you would find recover system from back up. click on it.
Just a suggestion ^_^
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
hello
I made a mistake by installing Rom on my phone umidigi a5 pro
I chose Format All + Download in sp flash tool by mistake and did not notice it until the end of the process and now my phone is away from the problem of IMEI it does not accept putting a lock to it and it cramps most of the time with a black screen appears, I cannot do anything until I restart it and the same process is returned
please anyone can help me
HidsonQ said:
hello
I made a mistake by installing Rom on my phone umidigi a5 pro
I chose Format All + Download in sp flash tool by mistake and did not notice it until the end of the process and now my phone is away from the problem of IMEI it does not accept putting a lock to it and it cramps most of the time with a black screen appears, I cannot do anything until I restart it and the same process is returned
please anyone can help me
Click to expand...
Click to collapse
Hi there,
Unfortunately I cannot help you with that problem as I'm not experimented enough with umidigi phone (that are more and more common around here). But I though a little response would be enough to warm your sad heart.
Also could you clarify what's going on with your IMEI?
Also, you double posted this question, let me ask @xanthrax for help with that
Here is the double one:
https://forum.xda-developers.com/android/help/phone-cramping-t4110453
Hello,
Thanks for your reply
As for IMEI, I fixed it, it remained a problem. The phone no longer accepts lock mode and when I lock the screen and open it again the phone stops working with a black screen until I restart it and some applications do not work
Any help @xanthrax !? please