Can anyone help me with my T10.
I flashed the firmware Hyundai_T10_20130402 (which I have downloaded from various sites/blogs) but
although the flashing completes succesfully,
after the automatic reboot the tablet never turn on.
There is no way to boot the device.
The only thing possible is to enter again into Update Mode and try to reflash
but the result is the same.
If anyone has used before another firmware than the 20130402, please inform me.
Hyundai T10 bricked
Niccon said:
Can anyone help me with my T10.
I flashed the firmware Hyundai_T10_20130402 (which I have downloaded from various sites/blogs) but
although the flashing completes succesfully,
after the automatic reboot the tablet never turn on.
There is no way to boot the device.
The only thing possible is to enter again into Update Mode and try to reflash
but the result is the same.
If anyone has used before another firmware than the 20130402, please inform me.
Click to expand...
Click to collapse
Hello,
I have exactly the same problem with the same firmware: flashed and my T10 went dead. Can somebody help, please?
Luiker said:
Hello,
I have exactly the same problem with the same firmware: flashed and my T10 went dead. Can somebody help, please?
Click to expand...
Click to collapse
try Reset Button ? I flash my T10 today and the firmware Hyundai_T10_20130402 is ok.
already tried...
adsawin said:
try Reset Button ? I flash my T10 today and the firmware Hyundai_T10_20130402 is ok.
Click to expand...
Click to collapse
Hi,
I already tried the reset pin, doesn't help unfortunately. The tablet still charge, but when disconnected from power it stays warm like the processor is still doing something. Of course nothing on the screen, no sign of life.
I have a question: how did you update exactely your T10? Especially what kind of message did you get while updating? and what happens when the update is finished?
thanks for the help anyway.
T10 unbricked
Luiker said:
Hi,
I already tried the reset pin, doesn't help unfortunately. The tablet still charge, but when disconnected from power it stays warm like the processor is still doing something. Of course nothing on the screen, no sign of life.
I have a question: how did you update exactely your T10? Especially what kind of message did you get while updating? and what happens when the update is finished?
thanks for the help anyway.
Click to expand...
Click to collapse
Hi all,
I solved the issue by
- waiting for a complete battery drain.
- putting the FW on a brand new 2GB microSD (no formatting).
- plugging the power on the tablet. Wait for 10-15mn.
- then starting the update sequence (pressing "Volume -" and "power" for few seconds.
suddenly the update message started, and the FW was flashed correctly! I'm using the tablet again and happy with it (except the GPS, doesn't work!)
I hope this might help somebody out there.
Good luck
Get Better Hyundai T10 in aliexpress in safe way!!
Thanks so much!
Get Better Hyundai T10 in aliexpress in safe way!
search Hyundai T10 in aliexpress, you will know!
Luiker said:
Hi all,
I solved the issue by
- waiting for a complete battery drain.
- putting the FW on a brand new 2GB microSD (no formatting).
- plugging the power on the tablet. Wait for 10-15mn.
- then starting the update sequence (pressing "Volume -" and "power" for few seconds.
suddenly the update message started, and the FW was flashed correctly! I'm using the tablet again and happy with it (except the GPS, doesn't work!)
I hope this might help somebody out there.
Good luck
Click to expand...
Click to collapse
Is there any stable firmware for hyundai t10 tablet.
If you click on software update .does it find update ?
Hi,
When updating an insertion of a tablet of hyundai t10 - the screen more tablet went out on anything doesn't react.
If to connect the charger, the indicator charging (lamp) lights up. reset didn't help.
How it is possibly to recover it?
I so understand that bootloader was damaged.
try the following...
dergyn said:
Hi,
When updating an insertion of a tablet of hyundai t10 - the screen more tablet went out on anything doesn't react.
If to connect the charger, the indicator charging (lamp) lights up. reset didn't help.
How it is possibly to recover it?
I so understand that bootloader was damaged.
Click to expand...
Click to collapse
Hi,
I just unbricked my T10 a week or so ago. See details in this thread: http://forum.xda-developers.com/showthread.php?t=2307107
I think it should work in your case as well.
good luck
Hello everyone!
I have the Vido N90 FHDRK. I flashed a rom from another tablet without changing the kernel and probably I bricked it.
At first I had only a light dark screen when I opened it without any logo. Then I tried to flash the old working rom, but the download of firmware on batchtool failed. Now, when I connect it with my pc, the first box turned to blue for a while and then to grey. I cannot flash another rom. And the tablet cannot open at all. Without a logo or anything.
Any help?
Anyone? I cannot find anything to unbrick N90 FHDRK....I tried to open the case from behind, but there is only a border that seems to be stucked with glue. I couldn't open the case.
good morning everyone. I have a problem with my padfone 2. It has some problem with the software, so I try to reset it from the menu on Android "backup&reset". It's the 4.4.2 firmware without root or any modding. Original rom. Now the phone won't boot up, it's stuck on the asus logo with an animated round that seems to searching for something.
Someone knows if I can try to flash another rom to give back life to my phone ?? I can't apply "update from external storage" cause the phone hasn't the SD slot....
Thank you all for the help!
Valerio
Up !
Did u have solve the issue ?
Hello everyone,
I have a Sony Tablet S, I flashed it (or at least I tried) with ICS. But upon restart, the tablet stays stucked on the SONY logo and nothing is happening. I can't connect it anymore to my PC and so the only solution is to use the SD card.
I searched a lot on the forum, I tried the unbrick app but my problem is that it cannot download any firmware/rom and the SD card remains empty.
Where can I download the firmware/rom to install on the SD card to reset the tablet. All links I can find are dead or are full of advertisment and impossible to download (antivirus goes crazy).
Thanks a lot for your help, I tried pretty much everything on the forum.
My tablet is SGPT111AE/S.
Thanks a lot.