Related
I was attempting to flash clockworkmod and I am now stuck in recovery. Attempting to reboot does nothing, I did a factory reset. Applying update.zip just gives me the error in the title of this thread, plus "can't mount update.zip"
I see this thread: http://forum.xda-developers.com/showthread.php?t=782204 as a last option but is there anything else I can do? If I remove my sd card and put a new update.zip on it manually, will this fix the problem?
ok a few things first.
1)which CWM did you install?
2)Which Rom are you trying to install?
if you have the rom on your sd card simply factory rest, wipe cache, and dalvik cash......
then without rebooting flash zip from sdcard [navigate to and flash your rom]
then reboot.
you shouldn't need the apply update zip
if that doesn't work odin a stock image and start all over again
xwhofarted said:
ok a few things first.
1)which CWM did you install?
2)Which Rom are you trying to install?
if you have the rom on your sd card simply factory rest, wipe cache, and dalvik cash......
then without rebooting flash zip from sdcard [navigate to and flash your rom]
then reboot.
you shouldn't need the apply update zip
if that doesn't work odin a stock image and start all over again
Click to expand...
Click to collapse
I'm not sure which version, the file only says "cwmrecovery.tar"
I'm trying to install CyanogenMod 7.1
Can you explain a little more regarding wiping cache and dalvik cache, and also how to flash the rom without using any application. I only have access to "reboot system now", "apply sdcard:update.zip", "wipe data/factory reset" and "wipe cache partition" as of right now
EDIT: Clockworkmod recovery is not functioning, if that was not clear.
Follow this guide for installing mtd roms such as cm7, aosp, miui...Just replace vgb rom with cm7.
http://forum.xda-developers.com/showthread.php?t=1212239
Hi guys,
A quick question.. I had some issues after installing Batista 0.5 ICS, meaning that in CWM Recovery, when I tried to wipe data/factory reset i got "Error mounting /sdcard/.android_secure". So I flashed stock LPQ, and went back in Recovery, and tried agan the wipe data/factory reset, and it only displayed "Formatting Complete".
Now my question is, does CWM wipe data does something more than stock recovery wipe data?
If not, can you guys help me to stop receiving that error message in CWM?
Thanks alot for your help!
Cheers
Talbred said:
Hi guys,
A quick question.. I had some issues after installing Batista 0.5 ICS, meaning that in CWM Recovery, when I tried to wipe data/factory reset i got "Error mounting /sdcard/.android_secure". So I flashed stock LPQ, and went back in Recovery, and tried agan the wipe data/factory reset, and it only displayed "Formatting Complete".
Now my question is, does CWM wipe data does something more than stock recovery wipe data?
If not, can you guys help me to stop receiving that error message in CWM?
Thanks alot for your help!
Cheers
Click to expand...
Click to collapse
NO its the same .
CWM gives additional wipe and format options .
Error message could be wrong /faulty firmware flash or likewise wrong CWM .
Flash rom again .
Basics of CWM are of course in the stickies .
jje
JJEgan said:
NO its the same .
CWM gives additional wipe and format options .
Error message could be wrong /faulty firmware flash or likewise wrong CWM .
Flash rom again .
Basics of CWM are of course in the stickies .
jje
Click to expand...
Click to collapse
Thanks JJE! I've tried all manner of CWM installs. Even went back to 2.3.6 KL1, so that i could install its respective CF Root kernel (along with an older version of CWM). But still the same issue appears. However, i found a "recovery kernel", that i think could help with my issue, but i'm not sure if i should flash it, since LPQ is 4.0.3 and that kernel says it's 4.0.2 (gt-i9100_clockworkmod-recovery_4.0.0.2.tar).
Is that safe to flash over 4.0.3 LPQ?
Thanks again!
Anyone? Am I alone in my little thread?
Echo, echo, echo...
You should be able to flash a 4.0.2 kernel over 4.0.3 no problems. Obviously backup first (Nandroid backup, Titanium backup, etc, etc). If something weird like the phone not booting happens, you could try flashing the original kernel again & see if you get CWM back & then restore your backup. Or at worst you might need to flash a stock rom in Odin, CFRoot again then restore your backup.
Obviously if you're having problems like that, as JJE suggested it might be a somehow incomplete flash of the rom in the first instance. It might even be worth trying a clean reinstall of the rom. Have you asked in the thread devoted to the rom if other users have had the same problem ?
Talbred said:
Thanks JJE! I've tried all manner of CWM installs. Even went back to 2.3.6 KL1, so that i could install its respective CF Root kernel (along with an older version of CWM). But still the same issue appears. However, i found a "recovery kernel", that i think could help with my issue, but i'm not sure if i should flash it, since LPQ is 4.0.3 and that kernel says it's 4.0.2 (gt-i9100_clockworkmod-recovery_4.0.0.2.tar).
Is that safe to flash over 4.0.3 LPQ?
Thanks again!
Click to expand...
Click to collapse
On which Firmaware are you now?
as you told in your first post "So I flashed stock LPQ, and went back in Recovery, and tried agan the wipe data/factory reset, and it only displayed "Formatting Complete".
that is what actually required to happen " "Formatting Complete". because it will not take more time since it is fresh rom there is nothing to format any user data..
when is your error reappearing?
Thanks Mistah,
I did try Odin installing the stock LPQ and then CF Root > error message. Then I tried Odin installing 2.3.6 KL1 and then CF Root > error message. However, in stock recovery, i didn't get any error message. It says the formatting is complete, so that must mean that it was able to format succesfully. In CWM recovery, however, if i try to wipe data, i get the "Error mounting /sdcard/.android_secure" message. "Skipping format" and so on..
What do you mean by a clean install?
Thanks Zaheed,
The error comes after i flash CF Root (on either LPQ ICS, or KL1 GB), and from CWM recovery i select wipe data/factory reset.
Formatting /data...
Formatting /cache...
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
Error mounting /sdcard/.android_secure!
skipping format...
Data wipe complete.
In Show Log (from CWM Recovery) it says the following:
Formatting /sd-ext
Formatting /sdcard/.android_secure...
I:Formatting unknown device.
W:Failed to mount /dev/block/mmcblk1p1 (No such file or directory)
Error mounting /sdcard/.android_secure!
Skipping format...
Data wipe complete.
Now I'm on stock LPQ downloaded from sammobile, the Open Europe version.
Any thoughts?
Thanks again for your time, guys!
By 'clean' install I mean format cache, data, system, & sd card then do an Odin install.
Talbred said:
Thanks Mistah,
I did try Odin installing the stock LPQ and then CF Root > error message. Then I tried Odin installing 2.3.6 KL1 and then CF Root > error message. However, in stock recovery, i didn't get any error message. It says the formatting is complete, so that must mean that it was able to format succesfully. In CWM recovery, however, if i try to wipe data, i get the "Error mounting /sdcard/.android_secure" message. "Skipping format" and so on..
What do you mean by a clean install?
Thanks Zaheed,
The error comes after i flash CF Root (on either LPQ ICS, or KL1 GB), and from CWM recovery i select wipe data/factory reset.
Formatting /data...
Formatting /cache...
Formatting /sd-ext...
Formatting /sdcard/.android_secure...
Error mounting /sdcard/.android_secure!
skipping format...
Data wipe complete.
In Show Log (from CWM Recovery) it says the following:
Formatting /sd-ext
Formatting /sdcard/.android_secure...
I:Formatting unknown device.
W:Failed to mount /dev/block/mmcblk1p1 (No such file or directory)
Error mounting /sdcard/.android_secure!
Skipping format...
Data wipe complete.
Now I'm on stock LPQ downloaded from sammobile, the Open Europe version.
Any thoughts?
Thanks again for your time, guys!
Click to expand...
Click to collapse
I think you dont want to worry about this error, after this wipe are you able to boot into the ROM? were your all apps and user data wiped? then no need to worry...
once again make sure are you selecting the correct matching CF-root for your ROM..
another option : I tried before when I got an error in my CWM was, I downloaded ROM manager (i did not concern to donate the silly bucks to Koush) and flashed the latest touch recovery (note: this will work only with ROM manager, not with CWM Manager)
and selected reboot into CWM from Rom Manager, then it will temporerly flash the touch recovery on your recovery partition, all options in that was working like a charm,
But when you select reboot into from anywhere else, or with Vol-up+Home+power you will be booted into your current custom recovery which was flashed along with the kernel.
regards
When i wipe data/factory reset from stock recovery, the image of Android comes up and that blue interrupted line at the bottom, and yes, the apps and settings are reset. However, in CWM recovery, when i wipe data/factory reset, that image of Android is somehow corrupted, with 3 blue interrupted lines showing up, but no animation. Even so, the apps and settings are reset.
So i'm thinking it has to do with recovery partition.
Anyway, I'll try your suggestion later on, as i'm at work now.
Thanks again, Zaheed! Guys..
Much appreciated!
I am trying to flash rom called " ICS Euphoria RC 2.1"
I had ICS Passion, so I tried to wipe first, then flash ICS Euphoria.
However, it failed to flash. So I odin back to stock first, then flash to
Cyanogenmod 7. Now, I am trying to flash ICS Euphoria RC 2.1 again, but it
keep failing. I wipe/factory reset, wipe cache, wipe delvich, format system,
then flash through cwm recovery mode. I get a message " e: can't
open/sdcard/euphoria_rc_2.1.zip (bad) " when i click to install from sdcard.
Please help me out!!
Download the rom again. File might actually be bad.
Sent from samsung vibrant
Like the personal above said, redownload it. If it fails again, flash a gingerbread bootloader and flash rom
Sent from my SGH-T959 using Tapatalk 2 Beta-2
Probarly you need a custom GB bootloader or the file is corrupted or you need to have it in internal/external sdcard wich ever works(I say that cause it happend to me)
Hob0dan-T959
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
dualsh0ck said:
hello..
i've search thru the forum, and my prob is somehow differ than others..
already unlocked bootloader.. apply custom kernel successfully..
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
still stuck at sony logo.. wait around 1 hour.. nothing happened...
then i remove battery, try to boot into cwm..
success..
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before.. and i restored back..
the ROM i tried is Pureness build 3 and jjHybrid 3.1.. both give same problem..
check screenshot of my system below.. is there's any problem with my system?
or it is related to odex?
so.. got any idea or possible solution?
or my phone problem itself?
thx in advance...
Click to expand...
Click to collapse
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
iamdchosen1 said:
I see that you are not wiping/formatting your data.. Wiping data is essential when installing a custom ROMs or switching ROMs..
Before wiping cache, format your data first!
Click to expand...
Click to collapse
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
megatpanji said:
try other kernel...
1. Pureness build 3 ,Kernel :Night Elfs ICS Kernel mod
2. jjHybrid 3.1,Kernel Use any of Following
a) STOCK Kernel (No OverClocking)
b) shardul_seth Kernel
c) Night-Elf Kernel
d) Adridu kernel
look at specific thread,you will find the answer.
Click to expand...
Click to collapse
thx but problem above already appeared when i tried to flash pureness build 3 ROM on night-elf kernel..
dualsh0ck said:
it is not enough to wipe cache, dalvik-cache, battery stat etc? becoz i already done all that through CWM.
and a noob question, how to properly format the data? phone data or sdcard data?
Click to expand...
Click to collapse
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
iamdchosen1 said:
The data has to be wiped when you install a custom ROM.. Since some of the data can cause troubles to the new ROM you have installed..
I advice you to do the following when installing a ROM.. Follow step by step..
- Flash the kernel first
- Boot into CWM mode by pressing 'volume down'
- wipe data/factory reset
- wipe cache partition
- wipe dalvik cache
- install custom zip from sd card i.e your custom ROM zip file
- reboot now
there you go now!
PS. Data formatting has to be done in CWM mode and it will not erase your sd data! So relax!
Also, press 'Thanks' if I helped you!
CHEERS!
Click to expand...
Click to collapse
according to my first post. here
dualsh0ck said:
step i do to flash rom:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
Click to expand...
Click to collapse
i've already done all wiping in CWM. but still stuck at sony logo.maybe i'll try some other kernel for jjhybrid3.1
Did you tried what I said?
Sent from my MT11i using xda premium
iamdchosen1 said:
Did you tried what I said?
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
i have suave kernel now.. and i want to change to alliance kernel..
dualsh0ck said:
one thing.. if i already used custom kernel and i want to change to another custom kernel.. can i just flash new custom kernel on the old custom kernel?
Click to expand...
Click to collapse
Yes.
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
dualsh0ck said:
after flashing Alliance1.4 kernel.. my phone got error message "com.android.phone has stopped". what happened?
as before, i just reflash to stock fw.. or there is another solution?
Click to expand...
Click to collapse
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
iamdchosen1 said:
I don't know why you're getting so much errors?!
I flashed everything on one go and all were just fine to work!
Please tell me your exact process of doing all this?
Click to expand...
Click to collapse
before this with alliance1.1 and suave6 kernel work with no probs.
must i tell this in every reply?
this is the exact step doing all of this..
flash kernel via fastboot thru command prompt window..
and flash rom thru cwm with this step..
- reboot into recovery [power button then repeatedly press volume up]
- [wipe data/factory reset,cache partition, advance wipe dalvik cache, battery stat]
- install custom ROM zip from sdcard (with no ERROR reports or problem during flashing)
- reboot into system
and chill bro. i have problem here, and i ask about it because i dont know what to do.
and fastboot folder must placed in android-sdk folders or it is not necessary?
bump
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Only boot.img has to be placed in android sdk folder.
Sent from my MT11i using xda app-developers app
Sorry I'm not awake today. Boot.img must be in android sdk and only the fastboot.exe file. I doubt it's got anything to do with that though, if you can successfully flash kernels.
Sent from my MT11i using xda app-developers app
Vampirmaniac said:
Are you sure the kernels are compatible with the custom ROM you are using? Usually the developer suggests some ROMs. Also, you might need a different baseband for the kernels you are using. Which ROM are you using? Some have extra steps you have to perform.
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
yup i'm sure.. because i want to flash night-elf kernel + jjhybrid3.1 rom..
as for now i use stock rom because can't successfully flash any custom rom..
my baseband 8x55A-AAABQOAZM-203028G-72.. it is also related?
HEY EVEN I HAD THE SAME SAME PROBLEM BEFORE...its was that i followed all the steps n still was stuck at bootlogo
even if i tried to go to recovery n flash the rom again , it simply said CANNOT MOUNT SD CARD.
So I tried to format my sd card using SDFORMATTER 3.1 and flashed the om again and :laugh: it WORKED
SO BASICALLY TRY TO FORMAT THE SD CARD USING SD FORMATTER software and not the windows default one.
IT WORKED FOR ME AND HOPE IT WILL FOR YOU ALSO
SD CARD FORMATTER 3.1 link google it
hey guys... really need help here...
i just successful UNLOCKED Bootloader,CWM and install custom kernel..
After fastboot the custom kernel (suave) then enter the CWM to flash custom ROM(Xperia_Ice_Cream_Pureness_build_6.00_NeoV)... wipe all data and other common step.. then i reboot the system
My phone get boot loop after that. So i remove the battery then enter the CWM again.. but the colour change to red and detect my phone as "xperia ARC".. plzzz.. i really stuck here
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
andyzeng1993 said:
Can someone help me flash this ROM? " http://forum.xda-developers.com/showthread.php?t=1844343 "
I've rooted then clockworkmod recovery and wipe cache and user data and then install zip from sd card
but when i reboot it always never boot past the screen with a yellow triangle can someone give me a complete guide from rooting cwm to flashing this rom?
Click to expand...
Click to collapse
have you checked md5sum: e9c809385764bc6083616ce8cd5b0f36?
once downloaded, it should have the same md5..
wow.. size: 150.21mb? that's pretty lite
Tequila6808 said:
Flash kernel with Odin.[http://forum.xda-developers.com/showthread.php?t=1617219]
After your phone is booted put the phone into recovery modes., In CWM do you wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage.Then install Rom from sdcard.
Click to expand...
Click to collapse
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
thats not a rom ma8, but a kernel to root ur phone first, so that u can install any custom rom of ur choice
andyzeng1993 said:
is this a different ROM? i really dont know what ROM to install and this sounds like it would be a lot easier
Click to expand...
Click to collapse
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
You know, after flashing a new rom booting may take some more time, at least a few minutes. Have you been waiting enough time?
First, check md5sum of ROM [what Saywhatt wrote a few posts back]
a. If you are no longer in recovery modes then you can get a kernel [tar file] Flashing with Odin.
If your phone then starts normally, then flash the ROM you want through CWM.
*** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
b. If you can get into recovery mode, not flash with Odin, but do these same steps;
**** wipe data / wipe cache / wipe Dalvik cache / format system in mounts and storage / flash ROM from sdcard***
PS. If it fails in step a first flash stock ROM with Odin
sorry for my bad english
saywhatt said:
what he is trying to say is that you should flash the kernel AFTER you flash your ROM
the ROM you chose is [CM10][Jellybro] i9100 Nightly Kangs, yes?
anyway..
here is what you should do
1. flash your rom
2. flash gapps for cm10
3. flash a kernel [an example of which is Dorimanx Kernel]
if you are still confused on some terms, please refer here
I hope this helps
EDIT:
you should root your phone first
Click to expand...
Click to collapse
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
andyzeng1993 said:
I installed stock ICS, rooted and has recovery mod, wiped cache data battery dalvik, installed the ROM in recovery mode, installed Gapps, and installed kernel, and now it boots to dorimanx's kernel screen and it stops.. and turns black... same thing
Click to expand...
Click to collapse
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Tequila6808 said:
which kernel have you flashed from Dorimanx?
You need to flash the JB kernel of Dorimanx (v7.x)
Click to expand...
Click to collapse
I flashed this
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x).
Hawker's GS2Wiper download."
Under this link " http://androidforums.com/galaxy-s2-...804-dorimanx-kernel-ics-jb-dummies-guide.html "
andyzeng1993 said:
i flashed this "http://androidforums.com/galaxy-s2-international-all-things-root/632804-dorimanx-kernel-ics-jb-dummies-guide.html"
in the
"Downloads
Dorimanx kernel downloads for ICS/JB, (v5.x) and JB+Mali, (v7.x)."
downloaded and flashed this in recovery
Click to expand...
Click to collapse
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Tequila6808 said:
Go to :http://dorimanx.shine.sk/ and flash v7.4 JB-MALI
Click to expand...
Click to collapse
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
andyzeng1993 said:
thanks i got it working but i keep getting a message says "unfortunately system UI has stopped working" ???
and all my contacts are gone? but my contacts are all saved in SIM card? but nothing pops up...
and also my drop down menu isn't working, when i scroll down from the top, nothing drops down...
Click to expand...
Click to collapse
Reflash Rom without wipe and wipe cache.Or try another Rom.
Tequila6808 said:
Reflash Rom without wipe and wipe cache.Or try another Rom.
Click to expand...
Click to collapse
any rom you suggest?
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
Yeah stock 4.0.3 and leave it at that.
I dont think you are cut out for all this modding
andyzeng1993 said:
any rom you suggest?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1569686