Galaxy s3 bricked ? - Galaxy S III Q&A, Help & Troubleshooting

Hii everyone.
This morning, I was trying to use my galaxy s3 international version but the phones was turned off.
I tried to turn it on, access download mode or even recovery mode : I GOT NOTHING :crying:
The phone cannot even be charged anymore.
Do you think I should use a usb jig to try to force download mode then flash via odin ?
Help please :crying::crying::crying:

you can try a jig, but it probably won't help. try a different battery first.
what firmware were you on? when have you last updated it?

I was actually running a custom ROM and before that i didn't do any updates from 2 months ago .

Karim Kahale said:
Hii everyone.
This morning, I was trying to use my galaxy s3 international version but the phones was turned off.
I tried to turn it on, access download mode or even recovery mode : I GOT NOTHING :crying:
The phone cannot even be charged anymore.
Do you think I should use a usb jig to try to force download mode then flash via odin ?
Help please :crying::crying::crying:
Click to expand...
Click to collapse
One read the SDS thread in General section .
|Two if you want try a USB Jig .
Needs a service centre though a JTag repair may be cheaper .
jje

Related

My GT-I9100G device is dead .. please help

Hi all
I bought a new Galaxy SII and unfortunately discovered lately that it is GT-I9100G. I rooted the device successfully with no issues. My cousin told me about a good ROM (without knowing about compatibility issue) he sent it through his I9100 device's Wifi. when I booted my device from the discovery mode and followed all the steps to install the ROM I failed to have my device up. It keeps showing the dead screen (the yellow triangle) with no luck
I read a lot of posts related to this issue I found that it is possible to fix by removing the battery and putting it back, connecting the device to the USB cable and then booting it in Download mode but again it failed !!
Now my device is dead since more than a month ago and my PC is not discovering it even. Please help to get my device alive ​
suzuki2004 said:
Hi all
I bought a new Galaxy SII and unfortunately discovered lately that it is GT-I9100G. I rooted the device successfully with no issues. My cousin told me about a good ROM (without knowing about compatibility issue) he sent it through his I9100 device's Wifi. when I booted my device from the discovery mode and followed all the steps to install the ROM I failed to have my device up. It keeps showing the dead screen (the yellow triangle) with no luck
I read a lot of posts related to this issue I found that it is possible to fix by removing the battery and putting it back, connecting the device to the USB cable and then booting it in Download mode but again it failed !!
Now my device is dead since more than a month ago and my PC is not discovering it even. Please help to get my device alive ​
Click to expand...
Click to collapse
You'd better read BEFORE flashing something... now you have to read A LOT for the finding a solution.
Are you sure your battery is charged enough?? Cause you said 'since a month'
Maybe it's bricked for ever...​
My battery is full.
suzuki2004 said:
My battery is full.
Click to expand...
Click to collapse
Ok, have you got KIES and ODIN on your PC? So your device can be recognized by odin. Then flash a stock rom from the forum ... Read How To flash with ODIN. (not the mobile version)
I have KIES and ODIN but when I connect my device to PC .. ODIN cannot recognize it.
suzuki2004 said:
I have KIES and ODIN but when I connect my device to PC .. ODIN cannot recognize it.
Click to expand...
Click to collapse
Make sure KIES is not running at the back and that the Samsung USB driver is installed. Maybe delete KIES, install again but not updating KIES. Restart PC, fire up odin and put your phone to usb ... wait if you see the ID:COM turns yellow. If so, you can flash again.
Can you be more specific..your phone can enter in download mode?
Did you try on other computer to check ondin/kies connectivity?
Odia (all credits goes to him) wrote on another semi bricked phone this:
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
(PS. is on a pc with widowsn7)
hope that it will help you to recover ur device.
Best regards
Ur options r:-
if phone can enter download mode then use odin to flash correct rom
If it doesnt work then pull out the battery connect phone to charger ...hold buttons for entering download mode and while holding the buttons put the battery in
If this doesnt work buy a usb jig and then while u have the battery pulled out put in the jig and then put in the battery and see if it enters download mode
If none of these things work then my friend ur phone is completely hard bricked
Ur only options r to go to samsung guys n get it repaired there...if they give u crap about losing ur warranty coz u flashed a custom rom then its better to go for jtag repair as that will be cheaper than the amount samsung guys r gonna ask for repair
Sent from my GT-I9100 using Tapatalk
Thank you very much fatjivi. You solved my problem. My device is alive now
I followed your second "if" .. I pulled out the battery . held the buttons for entering the download mode and while holding the buttons I put the battery back
Thanx also to ITRC & hhhans1 who tried their best in resolving my issue.
I really appreciate it guys
glad to have it back alive...SGS2 is such a great device,...almost cannot be bricked....from this samsung did a great job..
suzuki2004 said:
Hi all
I bought a new Galaxy SII and unfortunately discovered lately that it is GT-I9100G. I rooted the device successfully with no issues. My cousin told me about a good ROM (without knowing about compatibility issue) he sent it through his I9100 device's Wifi. when I booted my device from the discovery mode and followed all the steps to install the ROM I failed to have my device up. It keeps showing the dead screen (the yellow triangle) with no luck
I read a lot of posts related to this issue I found that it is possible to fix by removing the battery and putting it back, connecting the device to the USB cable and then booting it in Download mode but again it failed !!
Now my device is dead since more than a month ago and my PC is not discovering it even. Please help to get my device alive ​
Click to expand...
Click to collapse
what a tragedy​

[Q] i think i bricked my phone :(

O ****, my hart rate is 185BPM at this moment....
i thought just to update my CWM, did the whole trick but now my phone wont reboot. Only the first screen appears "samsung Galaxy s3 GT-I9300"
wth did i wrong and even more. Can i fix my phone?
cant get in recovery or download mode, even laptop doesn't recognize it.
aaaaaaaargh now i see what i did wrong, its for an verizon and mine inst, does it mean i bricked it?
sandeman11 said:
O ****, my hart rate is 185BPM at this moment....
i thought just to update my CWM, did the whole trick but now my phone wont reboot. Only the first screen appears "samsung Galaxy s3 GT-I9300"
wth did i wrong and even more. Can i fix my phone?
cant get in recovery or download mode, even laptop doesn't recognize it.
aaaaaaaargh now i see what i did wrong, its for an verizon and mine inst, does it mean i bricked it?
Click to expand...
Click to collapse
Source a USB download jig and try to get to download mode then .
Flash stock firmware via Odin and hope .
No download mode then its a paid for repair .
jje
JJEgan said:
Source a USB download jig and try to get to download mode then .
Flash stock firmware via Odin and hope .
No download mode then its a paid for repair .
jje
Click to expand...
Click to collapse
oke thanks, just ordered one on Ebay. Probably have to wait a couple of weeks...

[Solved]Help Required!! Suspecting Brick :(

Hello,
I am new to the S2 forum. I have purchased the phone on Dec 04. It came with firmware version 4.0.4.
The PDA was I9100XWLPW and CSC was I9100ODDLPC.
After a week, I flashed the leaked JB firmware XXLSJ and used PhilZ cwm6 kernel to obtain root.
I was not having any problems until today.
I was using the phone normally, it had about 60% battery. Suddenly it was not waking up ( The phone was not used for about 15min ). I tried removing the battery, all button combinations but was not booting normally or into recovery. I could get into the download mode by plugging the phone to the PC. Odin failed to flash the official FW and the JB leak. I followed the thread http://forum.xda-developers.com/showthread.php?t=1457458 and found out it was a corrupted NAND r/w function.
I tried doing all the steps given in the thread. Now my phone does'nt go into the download mode and does'nt show charging when plugged to a power source.
Can I recover my phone?
Please someone help me or guide me to a previous post that solves this problem!!
Edit: Samsung service has replaced the mother board!!
Doing the pit partition has resulted in my phone getting bricked!!
So people new to the forum, never do it :laugh:
Hi,
You said you couldn't access download mode, but can you access CWM recovery?
If you can then, you should wipe data/factory set, wipe cache and wipe Dalvik-cahe. after that you should re-flash your ROM.
If that doesn't work, maybe you should restore your CWM/Nandroid backup of your ROM before you flashed the JB leak XXLSJ, which in this case seems to be Stock ROM. (providing that you have backed it up in the first place)
Greetz and Happy new year
CashAndPotatoes said:
Hi,
You said you couldn't access download mode, but can you access CWM recovery?
If you can then, you should wipe data/factory set, wipe cache and wipe Dalvik-cahe. after that you should re-flash your ROM.
If that doesn't work, maybe you should restore your CWM/Nandroid backup of your ROM before you flashed the JB leak XXLSJ, which in this case seems to be Stock ROM. (providing that you have backed it up in the first place)
Greetz and Happy new year
Click to expand...
Click to collapse
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Pradeep said:
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Click to expand...
Click to collapse
HI,
today I wake up with the same problem.(Bug from the junary 1st???). I'm on Leak 4.1.2 too
Mi Galaxy sII don't charge the batery (loop from charge batery symbol) All the combination button don't wake up the phone.
The only thing seem working is the download mode. Don't try to connect to ODIN for the moment.
Any idea?
Pradeep said:
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Click to expand...
Click to collapse
Remove battery for some time re insert it and see .
Or
Try a jig
leap before you think
Pradeep said:
Hello,
I am new to the S2 forum. I have purchased the phone on Dec 04. It came with firmware version 4.0.4.
The PDA was I9100XWLPW and CSC was I9100ODDLPC.
After a week, I flashed the leaked JB firmware XXLSJ and used PhilZ cwm6 kernel to obtain root.
I was not having any problems until today.
I was using the phone normally, it had about 60% battery. Suddenly it was not waking up ( The phone was not used for about 15min ). I tried removing the battery, all button combinations but was not booting normally or into recovery. I could get into the download mode by plugging the phone to the PC. Odin failed to flash the official FW and the JB leak. I followed the thread http://forum.xda-developers.com/showthread.php?t=1457458 and found out it was a corrupted NAND r/w function.
I tried doing all the steps given in the thread. Now my phone does'nt go into the download mode and does'nt show charging when plugged to a power source.
Can I recover my phone?
Please someone help me or guide me to a previous post that solves this problem!!
Click to expand...
Click to collapse
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
Gediprime said:
HI,
today I wake up with the same problem.(Bug from the junary 1st???). I'm on Leak 4.1.2 too
Mi Galaxy sII don't charge the batery (loop from charge batery symbol) All the combination button don't wake up the phone.
The only thing seem working is the download mode. Don't try to connect to ODIN for the moment.
Any idea?
Click to expand...
Click to collapse
If you can access download mode, use it. Try re-flashing your kernel.
nikufellow said:
Remove battery for some time re insert it and see .
Or
Try a jig
leap before you think
Click to expand...
Click to collapse
JIG ???
Gediprime said:
JIG ???
Click to expand...
Click to collapse
Use the search button and use keywords "usb jig". Or google.
TheATHEiST said:
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
Click to expand...
Click to collapse
I am sorry!! I am new to this forum and the phone being a recent purchase, i was very much desperate!!
I know the answer may not be different and the problem may not be new hence I've asked to guide me to the appropriate thread in my post!! No offence!!
Thanks for your reply. I will be taking the phone to Samsung Service tomorrow.
Gediprime said:
JIG ???
Click to expand...
Click to collapse
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
TheATHEiST said:
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
If you can access download mode, use it. Try re-flashing your kernel.
Click to expand...
Click to collapse
I try it but when a push up level button my phone loop again to charging symbol (without charging)
Sorry if this post is the same than another. For my part i'm just trying to find a solution. A have plenty of corporative information on my phone. I do my last backup one weeks ago :crying:
nikufellow said:
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
Click to expand...
Click to collapse
In some of the posts, I've read that a JIG may not work on ICS based roms!!
Is this true?? Should I try a JIG first before I take the phone to Samsung Service??
I was on XXLSJ before the phone went dead!!
Gediprime said:
I try it but when a push up level button my phone loop again to charging symbol (without charging)
Sorry if this post is the same than another. For my part i'm just trying to find a solution. A have plenty of corporative information on my phone. I do my last backup one weeks ago :crying:
Click to expand...
Click to collapse
I had the same problem.. I could get into the download mode by:
1. Phone completely OFF state
2. Connect the USB cable to the phone and PC ( The battery charging indication has to come, atleast once )
3. Fire up ODIN
4. Get the phone into download mode ( Vol-down+home+Power ) while the phone is connected
5. The phone is now recognized by ODIN.
I could flash a kernel (tried siyah and Philz) but the phone was not booting.
While trying to flash Stock and XXLSJ, ODIN was getting failed at factoryfs.fs
After a few trys, the phone just went dead!!
Hope you can flash a firmware successfully :good:
Pradeep said:
In some of the posts, I've read that a JIG may not work on ICS based roms!!
Is this true?? Should I try a JIG first before I take the phone to Samsung Service??
I was on XXLSJ before the phone went dead!!
Click to expand...
Click to collapse
You are misinterpreting what you read. What you're referring to is resetting the binary counter, and no it doesn't work on ICS bootloader however it still works for putting device into download mode (unless its bricked).
nikufellow said:
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
Click to expand...
Click to collapse
"Soft-brick" has absolutely no meaning, Your device is either "bricked" or it isnt. Its a made up term by n00bs when they cant get system to boot normally. Your devcie is only bricked when it wont power on or go into useable recovery+download modes. If you can simply use a jig or go directly into flashing a rom then your device is not bricked.
The "bricked" term is used far too loosely nowadays.
Pradeep said:
I had the same problem.. I could get into the download mode by:
1. Phone completely OFF state
2. Connect the USB cable to the phone and PC ( The battery charging indication has to come, atleast once )
3. Fire up ODIN
4. Get the phone into download mode ( Vol-down+home+Power ) while the phone is connected
5. The phone is now recognized by ODIN.
I could flash a kernel (tried siyah and Philz) but the phone was not booting.
While trying to flash Stock and XXLSJ, ODIN was getting failed at factoryfs.fs
After a few trys, the phone just went dead!!
Hope you can flash a firmware successfully :good:
Click to expand...
Click to collapse
Your phone died? you kiding ?
I'm using the leak version of Sammobile since 3 weeks... Why do you think the phone make a bad reaction now? why now?
Ok, you try to flash OFW and don't result. and then you flash again the XXLSJ ? and the phone colaspe?
What kind of roms do i flash? OFM or CFW ? ICS or JB ?
Well if a can connect with ODIN of course
A quick question!!
Is it possible that the phone can be revived (put into download mode) using a JIG if it is not starting at all for any key combinations and it is not showing charging animation when plugged into a computer or a power source??
Pradeep said:
A quick question!!
Is it possible that the phone can be revived (put into download mode) using a JIG if it is not starting at all for any key combinations and it is not showing charging animation when plugged into a computer or a power source??
Click to expand...
Click to collapse
Yes its possible which is the reason we already mentioned to try it
It all depends on the actual base issue though as to whether it will work. Its worth a try either way though, They only cost £1-2 or you can make them yourself if you have the spare parts. (Don't ask how, Use search).
I have tried the JIG, but no luck!!
I have given the phone to Samsung Service.
Hope they fix it!!
Will they use JTAG or it has to be done somewhere else in case Samsung people refuse to do it??
They wouldn't refuse just act dumb tell something like you were updating firmware via kies and all of a sudden power went down and device bribed
leap before you think
nikufellow said:
They wouldn't refuse just act dumb tell something like you were updating firmware via kies and all of a sudden power went down and device bribed
leap before you think
Click to expand...
Click to collapse
Thanks!! Well I did act dumb there!! Said I downloaded a game Royal Revolt (~200 MB), the phone got heated, blah blah blah......
Well I did not tell about firmware upgrade via kies and all....
Only thing that I can do now is wait and hope!!:laugh:

my galaxy s2 dead !!

please help my !
i try to update the galaxy s2
soo i open "odin" and in mistakenly i root the galaxy s2 in root file of galaxy s1 !
and it take a long time so i unplug the usb and the s2 wont turn on !
i try evrething from evrething and the phone wont turn on !!!! :crying: :crying: :crying: :crying:
please sombady can help my please !!!
tenx
erezazaria said:
please help my !
i try to update the galaxy s2
soo i open "odin" and in mistakenly i root the galaxy s2 in root file of galaxy s1 !
and it take a long time so i unplug the usb and the s2 wont turn on !
i try evrething from evrething and the phone wont turn on !!!! :crying: :crying: :crying: :crying:
please sombady can help my please !!!
tenx
Click to expand...
Click to collapse
Wait... Did you pull out the battery and tried going into the recovery/download mode if not i think you'll need a usb jig to get in download mofr
Sent from my Samsung Galaxy S² with P.A.C Rom
i still dont undersend what jig do..
but i try to change for other full battery and the phone still dont turn on , i cant even to get to download mod/recovery :crying:
Little hope jig would help.Most probably will need to replace motherboard,or buy a new phone.
how i did the jig ?
Buy/borrow/make yourself.Search for guides of how to use it.
what ???
Read this forum.xda-developers.com/showthread.php?t=2345831
give this a shot . works most of the time : remove the battery and keep it out overnight . the next morning , ( the battery is still out ) press volume down + home + power button and then ask someone to plug in the battery . This works most of the time and you would hopefully boot into download mode . Then flash stock from odin .. report if this is not working. All the best !
Bet you a grand that doesn't work.
tenx flasherruts i wiil try this..
but not have other whys to fix the phone ?
Replace motherboard (that's if you want it fixed guaranteed first time).
i can not fix the phone whitout replace the motherboard ? but to fix it whit the computer ?
does it charges?
no , but i try to replace the battary whit other full battary
erezazaria said:
no , but i try to replace the battary whit other full battary
Click to expand...
Click to collapse
Keep wasting your time.You need a new/different mb.
I have exactly the same problem, but I accepted after 5 minutes I need a new/different mb.
:crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying: !!
ok.. tenx evreone
just try
erezazaria said:
:crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying: !!
ok.. tenx evreone
Click to expand...
Click to collapse
you can try "Samsung 300K Tool.exe" (search the web - it's easy to find) the software does quite the same thing of the usb jig (that is hardware -- with a resistance ...etc).
If it works the phone will go in download mode.
I'm not suggesting that it's what you need but... just try.
trueliar said:
you can try "Samsung 300K Tool.exe" (search the web - it's easy to find) the software does quite the same thing of the usb jig (that is hardware -- with a resistance ...etc).
If it works the phone will go in download mode.
I'm not suggesting that it's what you need but... just try.
Click to expand...
Click to collapse
Says it is a malware. Can't trust it, need an expeireinced user here to confirm that it is not virus.

Device Bricked??

Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
leocadenas said:
Hello ... calm .. everything has solution .. we are going to see what can be ... tell me ... the phone when you plug to the charger ... has take the load? it has appear something on screen?
Click to expand...
Click to collapse
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Amogh Thambi said:
No Sir, When I keep that for chargingbnothing Happens! No display! The phone won't turn on with battery but gets heated near camera area. Also I used 'Rashr' app to flash boot.img from nightly zip. Tried USB jig but still invain.
Click to expand...
Click to collapse
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
gsstudios said:
if you can't get into download mode in any way, your phone is bricked. There is nothing you can do now.
Click to expand...
Click to collapse
Okay. Thanks a lot! I guess I have to change it's motherboard!
Amogh Thambi said:
Okay. Thanks a lot! I guess I have to change it's motherboard!
Click to expand...
Click to collapse
yep, that's one way to solve it.
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
leocadenas said:
I think the same.. but ....... to obtain a new motherboard.. at least .. in my country .. mmmmm it is impossible!!! only used.... and not ten points.... Where are you Amogh Thambi ?
Click to expand...
Click to collapse
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Amogh Thambi said:
Here in India, A local shop owner told me that he could replace the motherboard for 3000RS (50$ approx) or Revive my hardbricked phone by repairing it for 1500RS (25$ Approx). It will be double cost if I go to official Samsung Care.
Click to expand...
Click to collapse
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
warrior1208 said:
Did you try changing your battery? Try to find a similar Samsung Battery and boot into download mode then. The boot.img is the kernel, and if it didn't flash, the ROM/Stock ROM should still boot up, or at the maximum should give you a bootloop. I still feel it is some battery fallacy, since the processes which you followed don't have any such errors.
Regards.
Click to expand...
Click to collapse
When i flashed boot.img the battery was almost full.... After it failed to flash... I rebooted to see if everything was okay... But Boom! After i pressed reboot to recovery the phone turned off and died..... Also in the repair shop, we tried booting up with electric source but still no luck! First Weird and Bad experience with samsung
Amogh Thambi said:
Hello Everyone,
I Rooted My Galaxy S2 (Indian 'G' Version), Then Installed A recovery Via ROM manager app. I forgot to unlock Bootloader, Then I downloaded CM11 Nighlty ROM zip....... Inside the zip there was Boot.img (which i thought that it is Cwm recovery) and flashed it with an app and it failed to flash.... And I rebooted my phone and BOOM!! My phone's dead.... Bricked (i think so)..... No Display, No download Mode, Nothing! I tried to bring it to download Mode by USB JIG..... But still no Luck! Please Help me friends! (Pardon me if I posted in wrong place! This is my first time in XDA)
Click to expand...
Click to collapse
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
jaysan2 said:
Hi, when you connect you i9100 to computer do get any response, like any beeping sound in pc or failed to find drivers error when connected to pc ?
Click to expand...
Click to collapse
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Amogh Thambi said:
Mine is I9100G ........ And when i connect to PC with battery nothing happens! But when i connect to PC with battery removed it shows "Failed to recognise device" and then it disappears!
Click to expand...
Click to collapse
hi, as i have seen your posts you have written that you do have tried jig, and no results. try to take out battery and connect the jig and put the battery, i believe this the last chance you might have through jig. Or just jtag it for 25$ it is not that expensive, let me know what happens with jig.

Categories

Resources