Hello, good afternoon, I just get bricked the apls gt-i93000, and I have no backup of any rom files. The flash tools, I recognize it, but if you try to start not responding. Someone could spend the necessary files for flashing, and I'm a little desperate and can not find PRELOADER and BSP_PL files anywhere, as I turn red. I hope someone will be kind enough to give me a hand to solve the problem. Thank you very much, greetings
Related
Heya guys...thanks to everything so far you have been a great source of information on how to root and flash and modify all my former android phones...so this time i have to ask you this thing...i think i have load a wrong rom on my star n9330 mtk6577 and now it is probably bricked...it will not boot up not even in recovery not even the china stock recovery where you have to press the volume down and boot...pc is recognising it as uknown usb device but when i plug the usb the led is firing up like when it is charghing...please help me i am stuck right now and i rly want to revive this phone cause i have it only for a day and a half....thanks in advance!!!!
P.s please do not answer as this have been answered in an other post...i have bidden my time and searched but found nothing specific for this model!!
Maybe you can start trying by looking here...
http://forum.xda-developers.com/showthread.php?t=1943442
Searched it...searched around meta mode but it did not work either...tried to make a usb jig aswell and think i got it right but nothing happeneded aswell.....:/
Service centre. You're hard bricked.
You reckon they will be able to fix it???
Don't think so but you can always have a try. If you want enjoy custom ROMs and kerenls, you should have gotten supported devices.
Hello,
I'm hoping I get a reply as some posts don't seem to get any...But here I go.
I have a Karbonn smart a10 previously rooted & re-flashed, but a few days ago i flashed it with the wrong options on the sp_flash tool and did not power on nothing.
I now installed the vcom drivers for MTK6577 and now it is detected as "MTK USB Port (COM16). When I flash it with sp_flash tool it says "Progress 100%" then "S_DA_DRAM_NOT_SUPPORT". I have all the correct rom for it, but what is this error? I see on some forums that an MTK can't really be bricked, so i'm hoping for a solution...Can anybody help me? Thanks in advance!
Ryder
Bump...Just need to know if it can be repaired or trashed, it's detected without being disconnected, somehow just need to put the rom back on it but keep getting that DRAM error, what does it mean? I have the good rom for it.
Bump...
Bump...Yay...4 Posts now :laugh: Come on, anyone? I've tried hundreds of solutions, perhaps I'm missing one. Can anyone help me out here?
EDIT: I have some good news...The rom that comes along needed the "_emmc" part added to "_Android_scatter_emmc" and now it came up with 'not enough storage" error. This is some great news! I'll post back if it has been fixed!
BUMP
No further progress...Any ideas?
mdr...
BUMP
Alright, this is getting lame, 2 and a half week bump!
Gonna pay anyone who can help, message me.
Fixed it myself so much for the 'help', if only i could 'thank' myself.
Solved.
Karbonn a10 dead
Ryder_[AFX] said:
Fixed it myself so much for the 'help', if only i could 'thank' myself.
Solved.
Click to expand...
Click to collapse
Hi, there! I have the same problem,after flashing the phone successfully--the phone failed to boot,no charging or anything,but it is being detected by SPFT,maybe you can help me.I am getting the same s_da_dram_error(3004).
I accidently erased the firmware off my Sky 5.5W and I have searched everywhere for it.
My computer recognises it but cant find the firmware .
Does anyone know where I can find it or if I can use different firmware?
Thanks
can you tell me the current condition of your device?
Like is it stuck on boot logo (boot loop)
or is it bricked?
I don't think it's bricked as the laptop still finds it.
try checking this link out
https://forum.xda-developers.com/showthread.php?t=1936747&page=2
also like my replies, its a great encouragement if you do so
Will it work with an mtk device.? I tried it but can find the proper software for it. The files the qfl asks for aren't apart of the files I have.
Well honestly I have never worked with MTK devices but I know what you should do.
Now if that's the case you may download SPFT (Smart Phone Flash Tool) and find the appropriate drivers for your MTK device and then flash the ROM you want to (I prefer the stock room).
I hope this will help you.
...I'm in similar position with a Platinum 5. Please let me know whether you found ROM for this device and if so where, and I'll let you know what I find out if you need. I think I'll try to get something from SKY themselves so wish me luck.
Hi guys, I hope someone can help me. I took a punt on a cheap Chinese phone and it arrived with all sorts of malware installed. after a bit of research I discovered I couldn't remove them without rooting, but as its based on an MTK6580 chip, it isn't as easy as using a one click root tool. So after learning I would need to use SP Flash Tool, I proceeded to follow the steps and have ended up bricking it. The MT6580 scatter file I found just results in the following error messages. error s_dl_get_dram_setting_fail 5054 and error s_ft_enable_dram_fail (4032)
The PC recognises it, but I can't find a pre loader that works with it. Has this been royally fooked? or can it be rescued? Any help will be appreciated as it seems decent enough for my needs and I already got my money back but if its gone toes up then its no big deal.
Anyone?
Hello. I'm Japanese so I'm using deepl translation to make this post.Sorry if it's hard to read.
Last time I accidentally wrote the recovery.img to the preloader area and the device hard bricked.
Charging, recovery and sp flash tools are not working due to the preloader corruption and are difficult to recover.
I did some research online and found an article about the mtk device having a test point.
I think I need this test point to recover the device, but I don't know where it is at all.
How do I find it?
Also, is there any other way to recover from this?
Can you tell me?
Best regards.