Hello, good afternoon, I just get bricked the apls gt-i93000, and I have no backup of any rom files. The flash tools, I recognize it, but if you try to start not responding. Someone could spend the necessary files for flashing, and I'm a little desperate and can not find PRELOADER and BSP_PL files anywhere, as I turn red. I hope someone will be kind enough to give me a hand to solve the problem. Thank you very much, greetings
Apparently sometimes it's not the best idea to use the flashing software that the manufacturer of your phone released.
I have a Wiko Lenny(technically a MediaTek MT6572) that has(or had - now it's dead) the habit of simply rebooting into a bootloop every few months. Fixing that was simple; just start SP Flash Tool, format everything then flash the stock ROM back. Last time I did that was around 4 months ago, and since then I have upgraded to Windows 10, and as such, lost the tools I had installed.
Yesterday it went into a bootloop again. I didn't remember exactly what tools I used, so I assumed they were the tools that Wiko supplied a while back with the V10 ROM. Well, they weren't. I still thought I'd give them a try. I mean, it's from the manufacturer's site, so they must work even better that the ones I was using.
I was wrong. The tool flashed the ROM "successfully", but the only thing it actually succeeded to do is corrupt the preloader. For those who don't know, corrupting the preloader basically means the phone won't even power on(not boot, actually power on), won't charge, and the PC won't detect anything if you connect the phone. Practically, it's the hardest brick a phone can get.
The fastest way to fix that is by either using a JTAG connection to flash everything manually, or by entering something called the Mediatek META mode(don't quote me on this one, though - I never heard of it before). JTAG - well I don't have the tools or expertise necessary to do that(although I'd love to learn how to do it - if anyone can point me to a well-written guide or two about that, please do!), and I simply can't get the phone to enter the META mode.
Is JTAG the only way to do it? Is META mode just a myth? Is there a way to save my phone, or should I just say "RIP" and buy a new one(I have the money for a Samsung Galaxy A3, the new one, but I was planning to buy a new computer with that money - is it worth it?)?
TL;DR (It's not that long but anyway...):
I have a Wiko Lenny(Mediatek MT6572) with a corrupted preloader after I flashed it with Wiko's tool. Can I repair it or should I just buy a new phone?
Link to the culprit that killed my phone(AKA Wiko V10 ROM): https://docs.google.com/uc?id=0BzeAvoIC2yhHMTZESUU1Y3hUM0E
Come on people, let's fix this little guy.
EDIT: Please, just tell me what your ideas are... A tip, a crazy idea, some details about MTK devices that could help, anything is appreciated.
Please...
Looks like I'm getting the 10 posts just by begging people to say something... :crying:
I have an MTK phone and its always going wrong and not booting/turning on because I mess with it and break it
I'm sure I flash the backup I made in mtktools with spflash, and plug the phone in with no battery attached, I also have to use windows 7 on a dual boot as windows 10 never played ball properly. You also need the mtk VCOM driver installed, not just adb and normal drivers. If you have all these, and have tried them, then that is the end of my knowledge sadly. Only other thing is going to needrom and seeing if they have a full rom/backup with partition tables/preloader etc.
Also, had to try a few versions of sptools as certain versions didnt work, forget which one I have and which didnt work. And also had to use a samsung USB lead as the stock one didnt work, or the other way round. I just remember it was a ball-ache but did eventually work. Am not on that pc so cant be more helpful, sorry....
robneymcplum said:
I have an MTK phone and its always going wrong and not booting/turning on because I mess with it and break it
I'm sure I flash the backup I made in mtktools with spflash, and plug the phone in with no battery attached, I also have to use windows 7 on a dual boot as windows 10 never played ball properly. You also need the mtk VCOM driver installed, not just adb and normal drivers. If you have all these, and have tried them, then that is the end of my knowledge sadly. Only other thing is going to needrom and seeing if they have a full rom/backup with partition tables/preloader etc.
Also, had to try a few versions of sptools as certain versions didnt work, forget which one I have and which didnt work. And also had to use a samsung USB lead as the stock one didnt work, or the other way round. I just remember it was a ball-ache but did eventually work. Am not on that pc so cant be more helpful, sorry....
Click to expand...
Click to collapse
Thanks for replying. I'm not sure if I have the VCOM drivers, but I'll check. Luckily I also have a Win7 PC besides this one, so I'll try it there too.
You need to repair preloader. Contact me !
gsm-decode said:
You need to repair preloader. Contact me !
Click to expand...
Click to collapse
Please do a nice thing, and tell me how to repair it here. Maybe there will be people in the exact same situation...
Can't fix MIne too !
DragonSky87 said:
Please do a nice thing, and tell me how to repair it here. Maybe there will be people in the exact same situation...
Click to expand...
Click to collapse
I also got an android phone that is INTEX AQUA I5 hd , i was flashing my phone and unfortunatly my pc got off while flashing . And my preloader got currepted .
When i tries to flash my phone it connects to pc as Mediatek Viacom port , but after 3-4 sec it connects as a usb port .
I continuously gots connceted and dissconnected .
and my Sp flash tool shoes error " S_DA_SDMMC_READ_FAILED(3153) "
Can anybody help me with it ? please help me as soon as possible.
You need to flash preloader by Testpoint,after that flash rom.
Dont remember exactly the testpoint but you can try
DragonSky87 said:
Apparently sometimes it's not the best idea to use the flashing software that the manufacturer of your phone released.
I have a Wiko Lenny(technically a MediaTek MT6572) that has(or had - now it's dead) the habit of simply rebooting into a bootloop every few months. Fixing that was simple; just start SP Flash Tool, format everything then flash the stock ROM back. Last time I did that was around 4 months ago, and since then I have upgraded to Windows 10, and as such, lost the tools I had installed.
Yesterday it went into a bootloop again. I didn't remember exactly what tools I used, so I assumed they were the tools that Wiko supplied a while back with the V10 ROM. Well, they weren't. I still thought I'd give them a try. I mean, it's from the manufacturer's site, so they must work even better that the ones I was using.
I was wrong. The tool flashed the ROM "successfully", but the only thing it actually succeeded to do is corrupt the preloader. For those who don't know, corrupting the preloader basically means the phone won't even power on(not boot, actually power on), won't charge, and the PC won't detect anything if you connect the phone. Practically, it's the hardest brick a phone can get.
The fastest way to fix that is by either using a JTAG connection to flash everything manually, or by entering something called the Mediatek META mode(don't quote me on this one, though - I never heard of it before). JTAG - well I don't have the tools or expertise necessary to do that(although I'd love to learn how to do it - if anyone can point me to a well-written guide or two about that, please do!), and I simply can't get the phone to enter the META mode.
Is JTAG the only way to do it? Is META mode just a myth? Is there a way to save my phone, or should I just say "RIP" and buy a new one(I have the money for a Samsung Galaxy A3, the new one, but I was planning to buy a new computer with that money - is it worth it?)?
TL;DR (It's not that long but anyway...):
I have a Wiko Lenny(Mediatek MT6572) with a corrupted preloader after I flashed it with Wiko's tool. Can I repair it or should I just buy a new phone?
Link to the culprit that killed my phone(AKA Wiko V10 ROM): https://docs.google.com/uc?id=0BzeAvoIC2yhHMTZESUU1Y3hUM0E
Click to expand...
Click to collapse
Repair your own device
Soft Brick: Soft brick is the state of android device which occur due to some software problems like boot loops or phone freezing at some point during boot. This only occurs if some software problem occurred in the device mainly during OS upgrade or ROM flashing. If your device is in such state then you are luck there are 99% chances that you can recover your beloved device without needing any professional help or spending hundred of dollars.
Hard Brick Hard brick is the state of android device that occurs when your device won’t boot at all i.e. no boot loop,no recovery and also not charging. This occurs due to trying to flashed firmwere not made for your device or flashed incorrectly. This is more difficult to resolve and often require professional help
in MTK Android there is many Partitions in your phone. like Preloader, Recovery, Bootimg etc….. if somehow Preloader get Corrupted then you phone will not able to DETECT WITH PC !!! in other words you will have phone with BOOT DEAD.
How Preloader get corrupted ?
There could be few reasons but main reason could be that someone or you Flash your complete phone (include Preloader) with wrong files or with wrong ver. Also there could be reason someone Delete Preloader or you Deleted.
How could i know my phone have preloader dead ?
Preloader can be dead if some one Flash it wrong and after flash your mobile will not detect with pc any more. for confirm
1.sp flash tools does not detect your phone anymore and also the computer does not as there is a pop sound when usb is connected to device
2.open device manager
take battery out from phone
insert usb
insert battery
and check is computer detecting any device
If it’s not detect then you have phone which Preloader is dead AKA Boot Dead
How can i repair it ?
requirement
1.screwdriver (by which you can open the screw from handset)
2.bricked device
3.a usb cable
4.a copper wire( for sold test points)
5.a pc with sp flash tool,mtk drivers and stock firmwere for your mobile
now you have to disassemble your phone and take pcb out. check there should be some Golden points. check these points there should be written on them Rx,Tx,GND,Vcc,Vcharge etc… check there should be written “COLO” or “KOLO” or“KCOLO” you have to Sold that point with GND After Sold Attach usb now your phone will detect with USB !! and now ready to Flash.
In some phones “COLO” or “KOLO” or “KCOLO” not written for those type of phones you have to test all points one by one Short Golden point with GND and attach usb cable which point short with gnd can able to detect your phone by pc isForce Preloader Mode Test Point !! Keep in mind Don’t Short Vcc,Vcharge or any other pin which have 4.x Volts also i had tested “Colo” or “Kolo” or “KCOLO” don’t have any kind of volts.
need help
gsm-decode said:
You need to repair preloader. Contact me ![/QUOTE
i have samsung clone A9 MT6580 After reflash phon,e is dead by sptool..i thinkl preloader is damaged..i dont have back up..but ditecting VCOM BUT Always "Sft Enable Dram_Fail (4032)" in format or fullfash in all tools
Click to expand...
Click to collapse
help me i corrupted my pre loader
gsm-decode said:
You need to repair preloader. Contact me !
Click to expand...
Click to collapse
hi sir I try to flash a stock rom downloaded from internet
its a vivo v5 android mobile phone
I tried to flash but I got a few alerts
the selected model does not support model verification
and
if I tried it gives me a brom error
now my phone condition is hard bricked and responding to flash tool
gsm-decode said:
You need to repair preloader. Contact me !
Click to expand...
Click to collapse
HI sir how can I contact you
Hi I also have the same problem - when I flashed the stock rom of my LG K7 X-210 (MT6580__lge__LG-X210__m13g__5.1__ALPS.L1.MP6.V2.19_ARIMA6580.WE.L_P42) with the SP Flash tool when I was in a bootloop, I accidentally forgot to uncheck the preloader option. I flashed it to my phone and from that point onwards it didn't want to start up any more, nor would it react if I tried charging it. So conclusion: the preloader is corrupt...
However, I read online that MTK devices (mine is MT6580) have a 'meta' mode which allows your device to still connect to SP Flash tool even if it is hardbricked (in my case by pressing the volume up button, and then simultaneously plugging it in the computer). It is then recognized as MTK Com port something in device manager.
Luckily I have the same phone (but it's not mine) and I was wondering if it was possible to make a full rom dump from that device and restore it on mine? (a method that is safe for the other device as well)
i have a proble on my new phone since i flash preloader my touch is not working anymore, any solutions ?
gsm-decode said:
You need to repair preloader. Contact me !
Click to expand...
Click to collapse
I need to repair preloader of My Nokia G20.
hello this is very simple.
i solved this problem.
i wrte english very small.
flash atarken yanlış attığın preloader dosyası ile başlat.cihazı bilgisayara bağla.format bittikten hemen sonra doğru preloader dosyasını klasörün içine yapıştır.ama çok hızlı olmalısın.yani uyumsuz preloader dosyası ile cihaza yükleme yaparken tam format esnasında uyumlu olan preloader dosyasını hızlıca yapıştır.
gsm-decode said:
You need to repair preloader. Contact me !
Click to expand...
Click to collapse
Hello, is it too late to write?
First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Costi979 said:
First of all, sorry for my bad english. My problem started when i deleted accidentally one partition of the tablet, trying to make an working twrp for it. Now I have no adb commands, no recovery, no fastboot,no logo,no display light. Nothing works. Just an expensive brick. PC only see something like "diagnosis 900E, instead of USB QDLoader 9008,so QFIL can do nothing to fix.I have changed driver,now can be seen QDLoader but QFIL gave me errors. I just bought another tablet, same model, for my son. I will try to pull out system, recovery, boot etc. But after that...? Any chance to make an bootable microSD card with those files? Any advice please?
Click to expand...
Click to collapse
So use ZTE tool studio emmc tool to unbrick your android.
Follow guide of Androidbrick.com.
The tool posted on these site is actually a ZTE tool studio tool by name of Androidbrick tool.
Just Google and download it from torforum.org
Already tried,not working.I cannot swich phone in download mode
Costi979 said:
Already tried,not working.I cannot swich phone in download mode
Click to expand...
Click to collapse
These tool unbrick your android when no fastboot, no recovery, not booting by anyways. Just detects in 9008 port. I am sure it's better than Qfil.
That`s the problem with port detection
How does this happened ?
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Barnabe02 said:
Hello Costi979,
Sorry for your tablet, I hope you will find a solution
I wanted to know if this happened when trying to install TWRP on this tab2 10-30 tablet, under Android 6.0.1, like explained in this thread : http://forum.xda-developers.com/android/development/recovery-lenovo-tab-a10-30f-l-twrp-3-0-t3442588 ? Can you confirm that it does work or not ?
Thanks for your explanations,
I hope you will success to recover your tablet,
Regards,
Sebastien
Click to expand...
Click to collapse
Sorry if u have issues to. My problem started when i erased via adb one partition . Twrp works fine
I accidently erased the firmware off my Sky 5.5W and I have searched everywhere for it.
My computer recognises it but cant find the firmware .
Does anyone know where I can find it or if I can use different firmware?
Thanks
can you tell me the current condition of your device?
Like is it stuck on boot logo (boot loop)
or is it bricked?
I don't think it's bricked as the laptop still finds it.
try checking this link out
https://forum.xda-developers.com/showthread.php?t=1936747&page=2
also like my replies, its a great encouragement if you do so
Will it work with an mtk device.? I tried it but can find the proper software for it. The files the qfl asks for aren't apart of the files I have.
Well honestly I have never worked with MTK devices but I know what you should do.
Now if that's the case you may download SPFT (Smart Phone Flash Tool) and find the appropriate drivers for your MTK device and then flash the ROM you want to (I prefer the stock room).
I hope this will help you.
...I'm in similar position with a Platinum 5. Please let me know whether you found ROM for this device and if so where, and I'll let you know what I find out if you need. I think I'll try to get something from SKY themselves so wish me luck.