Related
It is possible to enable USB debug from computer? I need to delete some file from the internal memory that causes the problem. I can't connect through adb at all.
I'm trying to fix my secondary phone (Garminfone) that that loads into desktop, but force close launcher and everything else. The only thing that I can do is connect to the computer for file sharing with the phone.
Thank you in advance.
I'm in a bit of a conundrum, myself...
I am attempting to do this, too, but for a totally different reason.
I am a VZW agent trying to extract contacts for a customer from a Moto. RAZR with a completely non-functional touch screen (no display, no function). Phone boots up fine, no sweat. Stock ROM, no backup :crying:, all of the typical means of transfer have been exhausted.
More or less, the only chance I have at succeeding is to either:
Enable USB debugging through some kind of shortcut or trick, or
Somehow, without USB debugging, figure out the user name for the customer's G-mail account (he has two, and cannot remember/doesn't use the one with all his contacts...)
Wouldn't be surprised if it's simply not possible.... but maybe somebody with a bit more knowledge can let us know! :good:
Edit: Hmm, not possible to run adb from the bootloader, but you can run Fastboot commands. None of those seem to be of use for these purposes though...
as mentioned by PhantasmRezound, It's not possible, However. adb is enabled in most recoveries. Also If the device is unlocked ( and you can flash custom recoveries ) in any way you can flash a custom recovery, back up the boot img. pull that off the device or simply put the sdcard in your computer with unpack that, edit the init.rc to start adb. and reflash it with fastboot not quiet what your after but might do the trick.
or
With the non functioning touch screen issue, If the device acts as a usb host, plug a mouse in and away you go
There's always a way.
Thanks for the input...
I appreciate the feedback, but the way I read it... it's either not going to help in this situation, or it's too technical for a noob such as myself and I'm in over my head
If the device is unlocked ( and you can flash custom recoveries ) in any way you can flash a custom recovery, back up the boot img. pull that off the device or simply put the sdcard in your computer with unpack that, edit the init.rc to start adb. and reflash it with fastboot not quiet what your after but might do the trick.
Click to expand...
Click to collapse
Customer's phone is completely stock. Hope I'm following along correctly, but I don't think this is possible without having something like ClockworkMod and pre-existing root access?
With the non functioning touch screen issue, If the device acts as a usb host, plug a mouse in and away you go
Click to expand...
Click to collapse
Never really tried this... but, I suspect, this won't work... not only does the touch screen not work, but the display is black.
I suppose it could be possible in combination with HDMI-out... but since the HDMI has never been set to "mirroring," I cannot simply plug it in and go (the best and only result I've gotten in this case is the red "M" logo on the screen...)
I would have given up on this hours ago, but it really bothers me when I can't figure out how to do something that appears to be so fundamental and simple...
Thanks for the inputs :good:
jad57pitt said:
Customer's phone is completely stock. Hope I'm following along correctly, but I don't think this is
possible without having something like ClockworkMod and pre-existing root access?
Click to expand...
Click to collapse
Well, I was thinking about this, and I think you can do adb in a stock recovery, should be able to create a backup image with the right software. It all gets a little hazy and wolly on techinical details, so I'm afraid I can't help anyone there.
jad57pitt said:
appreciate the feedback, but the way I read it... it's either not going to help in this situation, or it's too technical for a noob such as myself and I'm in over my head
Click to expand...
Click to collapse
And you're a noob , I fully understand that my casual, off the cuff, do a,b,c etc reply assumes a lot of technical knowledge, If it's not your phone man, don't stress it too much ..... Just hand it back to them look blankly into the middle distance while shaking your head.....use the following phrase " Nah man you've F*ed this up good, did you not sync it up with your google account at anytime "
Sorry man, I'm drunk, probably shouldn't be at this keyboard now
trevd said:
as mentioned by PhantasmRezound, It's not possible, However. adb is enabled in most recoveries. Also If the device is unlocked ( and you can flash custom recoveries ) in any way you can flash a custom recovery, back up the boot img. pull that off the device or simply put the sdcard in your computer with unpack that, edit the init.rc to start adb. and reflash it with fastboot not quiet what your after but might do the trick.
or
With the non functioning touch screen issue, If the device acts as a usb host, plug a mouse in and away you go
There's always a way.
Click to expand...
Click to collapse
Unfortunately, Garminfone is a piece of garbage, lol. There's no custom recovery for it. There is nothing I can do now, I guess. I can't get into fastboot or anything because every time I try adb or fastboot it would not recognize the device.
wolftou said:
Unfortunately, Garminfone is a piece of garbage, lol. There's no custom recovery for it. There is nothing I can do now, I guess. I can't get into fastboot or anything because every time I try adb or fastboot it would not recognize the device.
Click to expand...
Click to collapse
If nothing else, you can do a Factory Reset. You'll lose all data but it will be running again.
Make sure the phone is charged up since this will take a while.
With the phone off, hold down left on the d-pad as you power it on. It will show "Wipe User Data" and then you can let go of the buttons. Just leave it for an hour or so, it will go about wiping and restoring system files from it's own recovery partition.
Also, random Garminfone blog with interesting entries to read while waiting on your phone lol. The person started to develop a port for CWM:
http://mygarminfone.blogspot.com/
PhantasmRezound, I've done tons of wipes but no luck and I'm familiar with the website you posted. Everytime I wipe, I get force process com.android.setupwizard stopped unexpectedly on the phone.
@wolftou
Ok.... A couple more tricks to try for your specific device and then I'm all out of ideas plus it's kinda getting away the original question/topic
1 Android Safe Mode:
Android does have a safemode, exactly the same idea as windows safemode, only needed apps are loaded. This might let you remove the troublesome app.
How to get into it on your device? I have no idea and from my limted research ( google as always ), it appears to vary by manufacturer and probably device. I have booted my tablet into it a couple of times by accident but never really stopped to figure out how, that's not important anyway Just I can confirm this mode exists ( In some androids at least ).
2 Flashing an alternative rom:
Have you tried flashing a different rom? I'm not sure of your model number so I don't whether this is relevant to you but have a look at this thread it looks like you can trigger an update using a sdcard swap trick....
I'm thinking about buying one myself now... just to see what's possible with them, fortunately ( for my wallet at least ) they are not available in the UK and I've got plenty of things to fill my Android addiction for now :laugh:
all answer not similliar the question
across tablet 8"
i have 8 inc across tablet,i cannot open my tab,,i think the operating not found,,how can i install it..because i cant open the system ,,unit help me pls...
actually i got canvas doodle 2 with no external sd support nd my usb debugging mode is off nd no backup is there in my phone...
but there is adb sideload...is there any way to enable usb debugging? and my phone is rooted and it is stucked at boot logo
Alternative usb debugging...
Hey my phone is stuck in an bootloop.....is there anyway to enable usb debugging even tho i cant get into the phone
My lenovo vibe s1 is showing black screen
I tried rooting my phone by the steps given by your site and now my phone is showing black screen. i tried pressing volume buttons and power button still it is not working. so when i am connecting my phone to computer it gets connected for 1 min and disconnects and again connects after 1 min. so is there any possible way that i can send my phone to USB debugging through computer.
I need use my samsung j2 mobile on pc bcoz my mobile display is not working.
usb debugging off
Keyah Cort said:
Hey my phone is stuck in an bootloop.....is there anyway to enable usb debugging even tho i cant get into the phone
Click to expand...
Click to collapse
mine too... how to enable usb debugging? please help...
trevd said:
as mentioned by PhantasmRezound, It's not possible, However. adb is enabled in most recoveries. Also If the device is unlocked ( and you can flash custom recoveries ) in any way you can flash a custom recovery, back up the boot img. pull that off the device or simply put the sdcard in your computer with unpack that, edit the init.rc to start adb. and reflash it with fastboot not quiet what your after but might do the trick.
or
With the non functioning touch screen issue, If the device acts as a usb host, plug a mouse in and away you go
There's always a way.
Click to expand...
Click to collapse
Can you create a step-by-step tutorial? I have a LG Leon. Stock. Bluetooth/Wi-Fi disabled. My Google account won't accept. I've been trying to find ways to enable "Developer Options", "USB Debugging" just so I recover access. ADB and most of the programs I've used required USB Debugging, or wireless access.
Hello Everyone, I hope the you can help me with my request, How can I enable the USB debugging mode in android vers. 2.2.2 to 2.3.4
I really had a hard time since my Huawei Ideos s7-105 screen had been broken. I am not sure if the USB debugging was enabled. I have a really have a good reasons why I need to recover the files from my device.
Hoping for your kind response and help.
Monsterkid09
I'm sorry. I'm in doubt. I have a problem: Navon predator 10 tabs have dropped my gmail account. Adb debug off (or something you see 1-2 programs see something in adb mode but only in device info.If anything else i want always say do not connect. Very strong frp protection.What can I do?
I have spent a week sifting this forum and was unsuccessful in answering my own question. Please guide me as I am a NOOB to Android. Or straight up tell me I gotta send this in to Sony.
I bought this Xperia Tablet 2 in May. LOVE it! Made no Root mods, totally stock. Updated to 4.1.1 - OK! Updated to 4.1.1 release2 - issues.
Within a week, the tablet would shut off in the middle of Paper Monster and web browsing. I would restart and everything was fine, for a while. Then it shut down and would not boot back up. Sticks on SONY.
Tried soft reset, no luck. Tried Recovery (very hard to get into, fails 80% of the time to enter) no luck, still sticks on SONY.
So I don't have access to put the USB Debugging feature on, and its not rooted so 6.5 All-in-One can't help me (at least not in my current NOOB status)
I did purchase a brand new SGPT122 to replace this one, but have not set it up in hopes maybe someone could tell me how to copy the OS or RECOVERY off of it and install it on my SGPT121 to revive it.
Whats my next step?
SirStorm said:
I have spent a week sifting this forum and was unsuccessful in answering my own question. Please guide me as I am a NOOB to Android. Or straight up tell me I gotta send this in to Sony.
I bought this Xperia Tablet 2 in May. LOVE it! Made no Root mods, totally stock. Updated to 4.1.1 - OK! Updated to 4.1.1 release2 - issues.
Within a week, the tablet would shut off in the middle of Paper Monster and web browsing. I would restart and everything was fine, for a while. Then it shut down and would not boot back up. Sticks on SONY.
Tried soft reset, no luck. Tried Recovery (very hard to get into, fails 80% of the time to enter) no luck, still sticks on SONY.
So I don't have access to put the USB Debugging feature on, and its not rooted so 6.5 All-in-One can't help me (at least not in my current NOOB status)
I did purchase a brand new SGPT122 to replace this one, but have not set it up in hopes maybe someone could tell me how to copy the OS or RECOVERY off of it and install it on my SGPT121 to revive it.
Whats my next step?
Click to expand...
Click to collapse
Option 1 send to Sony tell them issues and ask for downgrade in firmware. They will probably say it is not possible.
Option 2 root and use AiO tool to install rescure back-door then you can install JB r1. You can then unroot and have it as stock.
stifilz said:
Option 1 send to Sony tell them issues and ask for downgrade in firmware. They will probably say it is not possible.
Option 2 root and use AiO tool to install rescure back-door then you can install JB r1. You can then unroot and have it as stock.
Click to expand...
Click to collapse
OK I have been attempting this all evening. I cannot get my computer to recognize the tablet. That is because I cannot enable USB Debugging because I cannot get past the SONY screen, right? Or is there another way to root?
It appears I can only access the Recovery Screen, and it does not like the version of OTA.zip I have. I have not found Recovery ROMS for this tablet.
I really appreciate your time, Thank You.
SirStorm said:
OK I have been attempting this all evening. I cannot get my computer to recognize the tablet. That is because I cannot enable USB Debugging because I cannot get past the SONY screen, right? Or is there another way to root?
It appears I can only access the Recovery Screen, and it does not like the version of OTA.zip I have. I have not found Recovery ROMS for this tablet.
I really appreciate your time, Thank You.
Click to expand...
Click to collapse
Adb should still be available in recovery wether usb debugging is on or not. Is it asking for a driver at all?
If you had the latest update installed then. You wont be able to install anything and it will need to go to sony.
SirStorm said:
It appears I can only access the Recovery Screen, and it does not like the version of OTA.zip I have. I have not found Recovery ROMS for this tablet.
I really appreciate your time, Thank You.
Click to expand...
Click to collapse
Check your device manager to see if the tablet driver is properly installed, if not, install it. This might help.
Sent from my GT-I9505 using xda app-developers app
Thanks for the help! I called Sony today, they said since the computer doesn't recognize the device and it will only go into recovery sometimes the pad needs service. (I know OF COURSE) But is does stand to reason since I have plugged into multiple PCs and no recognition. They are sending a box for me. I just hope my 32Gb version doesn't tank also.
Hey guys. I was going to post this on the Android Forums, but the L9 board there isn't getting hardly any traffic, so I suppose I'll just repaste here:
Hey guys, it's loopy time. xD
I've been through XDA, again, nobody seems to really have an answer for this, or even an answer for me. There's this guy over there named Kuma that made a stock 2nd-init locked bootloader ROM based off of 10e. I don't really desire to go back to it, but I like the fact that it comes with the xposed framework which you all know is an easy way to theme things that you should be able to theme, like making the status bar and notification area transparent.
I made a mistake in thinking that you can install Chainfire 3D on a locked BL, boy was I wrong. Two soft bricks later, I end up on 10d then do the OTA update to 10e. I've got the LG Mobile Support tool working as the offline flash. So I threw d on there and it worked....until I decided that I wanted to enable USB debugging.
There was a thread where I was advised to use Fastboot to flash the U and X boots, which I succeeded, but it wiped most of the partitions. At first I was panicking like...OMG, the family is going to worry because at this point I thought I was hard bricked, and my father is ill yada yada. So after about twenty minutes of crying and flipping out, I was able to get the USB for fastboot working with OMAP (which is tricky to install!) Three bottles of Pepsi Cola later, some chips, and a honey bun, I was able to get back to stock 10d.
Now, I've tried various drivers to try and get this thing to a go for ADB so I could root, install 2nd-init, and get Kuma's ROM back. I tried the updated drivers from the LG website. I have tried LG drivers 3.8.1.
The issue that I am having is that I am unable to access any of the connectivity modes while USB debugging is checked. If I uncheck it and try to plug it in, everything works perfectly. However, when USB Debugging is checked, no matter what connectivity mode I am on, I suffer with the LG Software coming up in autoplay and furthermore disconnecting after about ten seconds.
I tried in Ubuntu Linux to get it to work, and the same thing happens. This leads me to believe that either there is something wrong with the phone or something wrong with my computer, but other devices work. I'm really confused. Is there partitions for 10e MS769 MetroPCS that I can flash via fastboot to correct this? Is there another tool I can use to do this? I pretty much know fastboot is the key, but i'm going to need some assistance.
Hope you guys have an answer. I sure don't.
Please help me with this. I am familiar with fastboot maybe its a bad .bin file?
Assistance would be appreciated.
Thanks,
LoopyD
Bump.
Anyone?
Had the same problem, usb debug and any sort of adb connection doesn't work. Kuma comes to the rescue like the super hero he is and helped me fix it. Here is the post http://forum.xda-developers.com/showthread.php?p=49475336#post49475336 . Oddly enough this problem got worse for me I had it for about 3 months and it resulted in constant crashes and constant resets. Thank Kuma's post if it works!
Thank you sir. The ADB executable installer now shows the device. Problem solved.
Thanks
Sent from my LGMS769 using Tapatalk
hello guys m using Huawei Mediapad 7 Youth but its USB debugging option is disabled
please please help me to enable it so i can root it
its showing all that options but m unable to enable it
You mean it's disabled in the "Developer options" menu? Have you enable "developer options" yet?
It's a little trickier than that.
You have to tap the "Build number" in about phone several times.
If you pay attention, there is a counter which flashes up telling you hou many more times you need to tap.
mru55 said:
It's a little trickier than that.
You have to tap the "Build number" in about phone several times.
If you pay attention, there is a counter which flashes up telling you hou many more times you need to tap.
Click to expand...
Click to collapse
i know about that
usb debugging options are already available but are "DISABLED" m unable to ENABLE it
guide me that one please
Developer options.
Slider to on.
Then check USB debugging.
If you lose debugging when you close the screen, then you have probably disabled it with some security / anti-theft software such as Avast.
I was pretty sure you did, hence my question. Correct me if I'm wrong but you are running a custom ROM, aren't you? So, you must have rooted the phone before. If this problem is happening with this ROM only, then it is probably a compatibility problem. Have you asked for help on the ROM's thread here on XDA? Perhaps the developer can help you. I wish I could help you further but I have never used that ROM.
Its custom rom installed with security they disabled usb debugging, please help me to enable or root it
Sorry, you have to talk to the custom ROM people.
mru55 said:
Sorry, you have to talk to the custom ROM people.
Click to expand...
Click to collapse
they wont allow
any other option to root?
l2adiant said:
they wont allow
any other option to root?
Click to expand...
Click to collapse
Try a root software that runs directly from you phone, not your pc. It is a long shot, but worth trying. Otherwise, I guess you should consider changing to a less restricted ROM.
Alexei Volkoff said:
Try a root software that runs directly from you phone, not your pc. It is a long shot, but worth trying. Otherwise, I guess you should consider changing to a less restricted ROM.
Click to expand...
Click to collapse
tell me which software to use???? any suggestion?
or tell me how to install custom recovery without usb debug ?
Factory reset, or download an official Huawei ROM and install following the instructions.
l2adiant said:
tell me which software to use???? any suggestion?
or tell me how to install custom recovery without usb debug ?
Click to expand...
Click to collapse
Sorry, I can't recommend any specific app because I have never tried one first hand. You should ask for the opinion of people who have used these apps, here on XDA. As for the second question, I'm afraid I can't help you either.
However, the best solution is to stick to official ROMs. There are so many apps to customize so many different aspects of official ROMs that I've never felt the need to install custom ROMs in any of my phones. Pursuing this path of trying to root a ROM which the original developer doesn't want to be rooted is just a bag of hurt. It's not worth the trouble, IMO.
Good luck
The Youth was sort of the successor of the original MP, which I have, and which was better.
I think it has a locked Bootloader, but there probably is a solution here on XDA to unlock and root it, and probably a custom recovery, but no custom roms.
Hey everyone, i'm sorry if this isn't the right section to post that kind of stuff in, i have a galaxy s7 edge with a broken screen, it's unresponsive and it shows nothing, so it's pointless for me to plug a mouse via an OTG cable in order to operate it, other than the screen, i think it still functions though, it's relatively expensive to repair here in my country so i figured i might as well recover my data and get rid of it altogether afterwards, i don't have usb debugging enabled, and i don't how how to enable it via recovery mode (if it's possible that is), is there some way to like cast its display to a computer and use the latter the interact with it ? or at least access its storage ? i really have important data in the device, so if there's no way to recover it, i'll be forced to repair the screen, i really appreciate any help
Have you asked this already - like a year ago?
https://forum.xda-developers.com/t/samsung-galaxy-s7-edge-cracked-screen.3995855
So, no TWRP. Then flash a modified stock recovery of your own. Enable adb in it. Pull stuff if not encrypted. If not, root with SuperSu. Then pull stuff...
That was just guesswork. Try yourself what can be done...
CXZa said:
Have you asked this already - like a year ago?
https://forum.xda-developers.com/t/samsung-galaxy-s7-edge-cracked-screen.3995855
So, no TWRP. Then flash a modified stock recovery of your own. Enable adb in it. Pull stuff if not encrypted. If not, root with SuperSu. Then pull stuff...
That was just guesswork. Try yourself what can be done...
Click to expand...
Click to collapse
Yes i did, i completely forgot about it however ! anyway, there's no custom recovery (i figured it's pretty much a must just in case something like that happens, but it was too late unfortunately), i didn't search thoroughly yet, but i can't find already modified stock recovery files for the device (assuming there's any of course), and i don't know how to modify such files if that's possible, can you walk me though some steps ? although i thought i knew a little bit about that stuff, apparently it's not enough ! and thanks a lot, i really appreciate your help
Sisine said:
although i thought i knew a little bit about that stuff, apparently it's not enough
Click to expand...
Click to collapse
Same here. And that guesswork went wrong too as I forgot that you said in that other thread that usb debugging isn't enabled...
CXZa said:
Same here. And that guesswork went wrong too as I forgot that you said in that other thread that usb debugging isn't enabled...
Click to expand...
Click to collapse
It looks like i'm out of luck