hello guys m using Huawei Mediapad 7 Youth but its USB debugging option is disabled
please please help me to enable it so i can root it
its showing all that options but m unable to enable it
You mean it's disabled in the "Developer options" menu? Have you enable "developer options" yet?
It's a little trickier than that.
You have to tap the "Build number" in about phone several times.
If you pay attention, there is a counter which flashes up telling you hou many more times you need to tap.
mru55 said:
It's a little trickier than that.
You have to tap the "Build number" in about phone several times.
If you pay attention, there is a counter which flashes up telling you hou many more times you need to tap.
Click to expand...
Click to collapse
i know about that
usb debugging options are already available but are "DISABLED" m unable to ENABLE it
guide me that one please
Developer options.
Slider to on.
Then check USB debugging.
If you lose debugging when you close the screen, then you have probably disabled it with some security / anti-theft software such as Avast.
I was pretty sure you did, hence my question. Correct me if I'm wrong but you are running a custom ROM, aren't you? So, you must have rooted the phone before. If this problem is happening with this ROM only, then it is probably a compatibility problem. Have you asked for help on the ROM's thread here on XDA? Perhaps the developer can help you. I wish I could help you further but I have never used that ROM.
Its custom rom installed with security they disabled usb debugging, please help me to enable or root it
Sorry, you have to talk to the custom ROM people.
mru55 said:
Sorry, you have to talk to the custom ROM people.
Click to expand...
Click to collapse
they wont allow
any other option to root?
l2adiant said:
they wont allow
any other option to root?
Click to expand...
Click to collapse
Try a root software that runs directly from you phone, not your pc. It is a long shot, but worth trying. Otherwise, I guess you should consider changing to a less restricted ROM.
Alexei Volkoff said:
Try a root software that runs directly from you phone, not your pc. It is a long shot, but worth trying. Otherwise, I guess you should consider changing to a less restricted ROM.
Click to expand...
Click to collapse
tell me which software to use???? any suggestion?
or tell me how to install custom recovery without usb debug ?
Factory reset, or download an official Huawei ROM and install following the instructions.
l2adiant said:
tell me which software to use???? any suggestion?
or tell me how to install custom recovery without usb debug ?
Click to expand...
Click to collapse
Sorry, I can't recommend any specific app because I have never tried one first hand. You should ask for the opinion of people who have used these apps, here on XDA. As for the second question, I'm afraid I can't help you either.
However, the best solution is to stick to official ROMs. There are so many apps to customize so many different aspects of official ROMs that I've never felt the need to install custom ROMs in any of my phones. Pursuing this path of trying to root a ROM which the original developer doesn't want to be rooted is just a bag of hurt. It's not worth the trouble, IMO.
Good luck
The Youth was sort of the successor of the original MP, which I have, and which was better.
I think it has a locked Bootloader, but there probably is a solution here on XDA to unlock and root it, and probably a custom recovery, but no custom roms.
Related
Hey everyone! I flashed a ROM this morning and it failed. One thing leading to the next I ended up with no OS on my phone and USB Debugging turned off. Now I want to turn on USB Debugging but the only menus I can access from the phone are "Recovery" and "Bootloader." Is there anyway to turn it on or am I screwed. Also, I kinda regret messing with all of these ROMs and rooting my phone so iif you guys can give me a link to a ROM that doesn't make any major changes to your phone here, that would be great. Or the original ROM that came with the phone would be good. Thanks in advance.
Forgot to mention. My phones a HTC One S Tmobile carrier. Thanks in advance.
Hi,
Well as far as i know the USB Debugging is an option that you can set on Android Settings. So if your os wont boot, then you can't enable it.
Anyway you should include your phone spec, so the experienced users can provide help with your ROM needs. Like if you got a samsung, you might be able to find your stock firmware on sammobile.com/firmwares
Hope this helps.
SmithFunk said:
Hi,
Well as far as i know the USB Debugging is an option that you can set on Android Settings. So if your os wont boot, then you can't enable it.
Anyway you should include your phone spec, so the experienced users can provide help with your ROM needs. Like if you got a samsung, you might be able to find your stock firmware on sammobile.com/firmwares
Hope this helps.
Click to expand...
Click to collapse
Thanks I forgot to put it up. I thought I put it in the title turns out I didn't.
Andriod Version 4.4.2
Software Version VS89022A
Tried looking everywhere and tried alot of different methods, it seems like no one knows how to root it and all the methods I tried didn't work.
Bump
You tried stump root? It works with just about any other android 4.4 lg phone. (Check out this thread.)
By the way, I couldn't get adb working on the LG enact. It doesn't even show up in device manager. Any ideas?
aicitman said:
You tried stump root? It works with just about any other android 4.4 lg phone. (Check out this thread.)
By the way, I couldn't get adb working on the LG enact. It doesn't even show up in device manager. Any ideas?
Click to expand...
Click to collapse
Did you enable USB Debugging? Did you see the prompt to accept the RSA key on the phone when you plug it in? Often time on LGs it pops up behind the screen that shows up to select MTP/PTP/Charging modes and it's easy to miss it. Sometimes you have to toggle through all the modes to get it to pop up. Thinking about it now...I know a lot of LGs for VZW need to be in...Internet Tethering mode? or whatever it is they call it, for root stuff to work, so might have something to do with that mode loading the correct drivers for adb.
es0tericcha0s said:
Did you enable USB Debugging? Did you see the prompt to accept the RSA key on the phone when you plug it in? Often time on LGs it pops up behind the screen that shows up to select MTP/PTP/Charging modes and it's easy to miss it. Sometimes you have to toggle through all the modes to get it to pop up. Thinking about it now...I know a lot of LGs for VZW need to be in...Internet Tethering mode? or whatever it is they call it, for root stuff to work, so might have something to do with that mode loading the correct drivers for adb.
Click to expand...
Click to collapse
Correct, ADB only works when on "Internet Connection" mode.
aicitman said:
You tried stump root? It works with just about any other android 4.4 lg phone. (Check out this thread.)
By the way, I couldn't get adb working on the LG enact. It doesn't even show up in device manager. Any ideas?
Click to expand...
Click to collapse
Yea when ever I try stump root it just says that it doesn't support my device and doesn't let me do anything.
Boolink said:
Yea when ever I try stump root it just says that it doesn't support my device and doesn't let me do anything.
Click to expand...
Click to collapse
The new version should give you an option to brute-force the device.
aicitman said:
The new version should give you an option to brute-force the device.
Click to expand...
Click to collapse
I have the latest version and it doesn't allow me to do anything. the button is greyed out. it just says ERROR: Unsupported device
Boolink said:
I have the latest version and it doesn't allow me to do anything. the button is greyed out. it just says ERROR: Unsupported device
Click to expand...
Click to collapse
I used the towelroot app by geohot. Rooted it. No problem.
I just can't seem to find a TWRP or CWM recovery for this device. It's evidently been neglected. I haven't found anything yet on flashing cyanogen (or anything else) on it, which is what I really want to do.
Any ideas?
misant777 said:
I used the towelroot app by geohot. Rooted it. No problem.
I just can't seem to find a TWRP or CWM recovery for this device. It's evidently been neglected. I haven't found anything yet on flashing cyanogen (or anything else) on it, which is what I really want to do.
Any ideas?
Click to expand...
Click to collapse
What android version did you have? Mine is 4.4.2. Whenever I try to use towelroot it just says this phone isn't supported.
Boolink said:
Andriod Version 4.4.2
Software Version VS89022A
Tried looking everywhere and tried alot of different methods, it seems like no one knows how to root it and all the methods I tried didn't work.
Click to expand...
Click to collapse
Their you go have a look over the video posted over http://electrastores.com/mobile_rooting/How_to_root_LG_Enact_VS890_EASY_Rooting_/691001/
it will guide you with the rooting your device device ! See if that can be of your use !
promo87 said:
Their you go have a look over the video posted over http://electrastores.com/mobile_rooting/How_to_root_LG_Enact_VS890_EASY_Rooting_/691001/
it will guide you with the rooting your device device ! See if that can be of your use !
Click to expand...
Click to collapse
Clicking on random shortened url links and downloading random crap on a video with no comments and hardly any views? Sounds totally legit bro.
Well, I tried all the "one-click" apps (I don't care if they sell my info) and none work so far...
So it's time to consult XDA. Did it years ago, doin' it now. I'm new here, but you will be happy to know I read all the rules.
Time to fix this chinese piece of crap! This is the only device I own, and I can post all the processor and system info if needed. IDK if the bootload is unlocked or not, but a guy in another post for another RCA tablet mentioned he owned this same one and they said he might not need to unlock it. So IDK. NOTE I HAVE RCT6513W87 WITH NO "M" ON THE END. DIFFERENT MODEL.
So first, what am I gonna need? USB M-2-M?
I don't have any experience using ADB, however.
Don't really know what I'm doing so far.
BUMP
BUMP
BUMP BUMP
BUUUUUUMP
@Lootron
Did you try Dr Fone?
I suggest you consult this thread for more information on rooting with or without one click tools:
https://forum.xda-developers.com/canvas-juice/how-to/guide-unlocking-bootloader-rooting-t3705781
HIT THANKS IF FOUND USEFUL
I just spent the last few hours attempting to connect it to my Windows 10 PC. Nothing. 100% Impossible. Modified registry, edited drivers, tried modified google drivers but it kept saying "Windows has determined that you already have the best drivers for this device" trieda few workarounds for that. Damn, really want this rooted but it seems impossible.:crying:
Lootron said:
I just spent the last few hours attempting to connect it to my Windows 10 PC. Nothing. 100% Impossible. Modified registry, edited drivers, bla, bla, bla. END QOUTE]
Yeah, been there. However there should be a way. There's a five second window of opportunity when you have the USB connected, have the PC in the device manager. I'm willing to bet most of the process is the same when it comes to accessing the device according to Smartman Vartans tutorial for the RCA Viking Pro. I have that, the version before it and I have the Galileo, Build Number (RCT6513W87-ANDROID6.0-V21-V1.23.30-W02). It's about time I do something with it. His method is incredibly complex from the looks of it. But I'm willing to get root at least. Sounds like it's time for experimenting. Okay, I'm in. I'll see if I can pull some resources. Enable Developer settings (tap build 7 times). In The Developer settings turn it on. Turn on OEM Unlocking (to unlock the Bootloader). Turn on USB Debugging. Go down to Select USB configuration and make sure it's at MTP.
---------- Post added at 12:23 AM ---------- Previous post was at 12:07 AM ----------
[/COLOR]The Viking Pro used a SP splash tool to see the device , I've heard it works on this. Also listed was a driver. I'll go look for the frimware hopefully we both have the same. Then there's one thing that's been making me wonder. The Viking Pro uses the exact same motherboard and components as the Acer Icona, which has current 8.0 firmware. I don't see why for the life of me why I can't float that firmware in the RCA. It's an idea. But here's the Viking Pro link,
https://forum.xda-developers.com/android/general/firmware-rca-viking-pro-rct6303w87dk-t3325158
Click to expand...
Click to collapse
I feel forced to leave a note here. Stuck on some double reply mode. Where's the delete button?
Wow!
Hey thanks, I saw you on another forum (unless Casper Young is a common name?) and you said something about usb serials being locked, but I will defintely look into this! THX!
EDIT: BTW, my build number is V08- 1.15.20
I'll bet that's me, and my actual name. Howdy Thar. Yes USB Serials appear locked by manufactuer. When I dig into the data section of my rooted Viking Pro I happened to notice they were somehow locked and I was unable to follow the pathway. I can still try. But what I think you're trying to do is gain access via USB, correct? I talked to Smartman Vartan long ago and we have one interesting delima. Okay so we can gain access, but then what? It's not like we can just throw anything in it. I have 3 different devices The Maven Pro, the Viking Pro (both are rooted) and I got this Galileo Pro. Long story short, I was looking for compatible firmware. Went old school, look at the specs. Not the ordinary ones you find anywhere, the real specs. Go here, https://www.productchart.com/tablets/11121 sign up, yeah, WOW! Okay so I compare a few things, (I'm off exploring the Viking Pro), didn't have the galileo yet. Now, come to find out, the Viking has the same exact motherboard and components as the Acer Icona 10.1 (I forget which specific one). Hmmmm, now that's intresting. Can I, just toss it in there? I don't see why not. Others here suggest otherwise. I don't flash anything without back-up That's item #1 we need if you're gonna follow along. #2? The SP Flash Tool. I have those. Now I gotta open this puppy up and check out the motherboard. Gimmie a couple days I'll get back.
I wish we could use Odin3 but here's what I got For starters. I'll write out the tutorial if I get anywhere. How to run the SP Flash Tool:
https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool
Current SP Flashtool: https://drive.google.com/open?id=1JzB5tzTvQYOGpVfhZNKY22_N-nD-jtDA
Firmware: https://drive.google.com/open?id=1zB1waSYM0iwdobu0jdxP1WJD6r1F8-XI
MTK Drivers: https://drive.google.com/open?id=1wRdulyOKLgeT_VWbhM9tm1-hqtgSL_BD
How to install the drivers:https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Rooting
If your intention is only to root the device you must first enable Developer Settings and then enable OEM unlock which gives you access to the Bootloader. Now you can flash in a custom recovery and then you will be able to root the device. You cannot do so by any other means. It will reject any attempt to root unless the Bootloader is unlocked!
Casper Young said:
If your intention is only to root the device you must first enable Developer Settings and then enable OEM unlock which gives you access to the Bootloader. Now you can flash in a custom recovery and then you will be able to root the device. You cannot do so by any other means. It will reject any attempt to root unless the Bootloader is unlocked!
Click to expand...
Click to collapse
Ok, I have everything, I THINK I installed the drivers, but I am waiting for it to charge to be sure. Can you be a little more clear on your instructions here? Do I flash the firmware? What order do I do everything? Custom Recovery first? Firmware first? How do I unlock the bootloader when it STILL doesn't regonize the device in ADB?
BTW, I installed the drivers by the SmartmanVartan method.
Lootron said:
Ok, I have everything, I THINK I installed the drivers, but I am waiting for it to charge to be sure. Can you be a little more clear on your instructions here? Do I flash the firmware? What order do I do everything? Custom Recovery first? Firmware first? How do I unlock the bootloader when it STILL doesn't regonize the device in ADB?
BTW, I installed the drivers by the SmartmanVartan method.
Click to expand...
Click to collapse
How do I flash the firmware? SmartmanVartan's method?
MTK drivers
Lootron said:
How do I flash the firmware? SmartmanVartan's method?
Click to expand...
Click to collapse
You have Windows 10 right?
Read this:
https://tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/
Casper Young said:
You have Windows 10 right?
Read this:
https://tehnotone.com/windows-10-mtk-vcom-usb-drivers-for-32-64-bit-drivers-installation-tutorial/
Click to expand...
Click to collapse
Yesterday, I tried flashing the firmware you linked to, and well, RIP. Bricked. Yours had build number .22, while I needed .15. So now I don't know if I can fix it. BTW Drivers worked and everything else. Did "fastboot oem unlock" and got to the "Do you want to unlock bootloader?" page, BUT the volume keys weren't programmed into it so you can't confirm nor deny. The bootloader needs to patched.
But before I get there, I need you to find a firmware that has .15 in the middle like this: x.15.x
Please, you are my only hope.
PS: I contacted Bogram, who patched the bootloader on the viking pro. If I can get the right firmware, then I can send it to him so he can patch it and I'm there. IF HE DOES IT.
TIA!
Brick
BTW, I think it might be a hard brick. I don't know much about bricking, but it won't even turn on, and the charging light comes on if even it isn't plugged into the outlet (SUPER WEIRD)
EDIT: When flashing, it never said completed. I waited for a really long time and then clicked stop. I really don't know too much of what I'm doing
Woouch!
Lootron said:
BTW, I think it might be a hard brick. I don't know much about bricking, but it won't even turn on, and the charging light comes on if even it isn't plugged into the outlet (SUPER WEIRD)[END QOUTE]
Wow try slowing down a bit. Sorry to hear your having difficulties with your tablet. I didn't expect you to flash it yet. No-one has provided anything to flash into it yet, I thought we were going to go looking. I'm hoping there can be a way to get past a brick. I've been reluctant to flash any of my devices for exactly the reason that you're dealing with. I didn't think to post what my firmware build number was, I'll edit that in.
I'll look for your firmware or ask RCA for it. This might take a bit. What color light is showing. And somehow try getting it to boot to recovery. Where you can reset it. Thats where the back-up is supposed to go also. There can be a variety of combinations to get there. Isn't there a reset hole to the left and a little below the micro sd slot. You may have to have it docked to get to recovery (the Viking Pro is like that). I'll do some research and see what I can find.
Click to expand...
Click to collapse
Casper Young said:
Lootron said:
BTW, I think it might be a hard brick. I don't know much about bricking, but it won't even turn on, and the charging light comes on if even it isn't plugged into the outlet (SUPER WEIRD)[END QOUTE]
Wow try slowing down a bit. Sorry to hear your having difficulties with your tablet. I didn't expect you to flash it yet. No-one has provided anything to flash into it yet, I thought we were going to go looking. I'm hoping there can be a way to get past a brick. I've been reluctant to flash any of my devices for exactly the reason that you're dealing with. I didn't think to post what my firmware build number was, I'll edit that in.
I'll look for your firmware or ask RCA for it. This might take a bit. What color light is showing. And somehow try getting it to boot to recovery. Where you can reset it. Thats where the back-up is supposed to go also. There can be a variety of combinations to get there. Isn't there a reset hole to the left and a little below the micro sd slot. You may have to have it docked to get to recovery (the Viking Pro is like that). I'll do some research and see what I can find.
Click to expand...
Click to collapse
Whoops. Yeah I'm sorry, I've always been a bit hasty. I have looked for my firmware, but would RCA give it to you? I forgot to say my processor is MT6513. Not MT6127.
Well, thanks for spending so much of your time for me though. You have been very helpful. For me, bricking it was a learning experience. I learned a LOT about how android works messing with this tablet, and come on, it was a crap-let I only decided to
"hack" it once we ordered a new one (The keyboard doesn't work anymore)
The day I did it, I got frustrated I couldn't unlock the bootloader, so I wanted to do something else, without thinking about it. LOL. Well, more learning for me!
The only light it ever does it bright blue, and it no longer does it without being plugged into the outlet. Oddly enough, I didn't think to use the reset button, and in device manager it still shows up as preloader device, even though I suspected to be the preloader to be corrupted. There really shouldn't be a reason it won't start now. Also for some reason, ADB never has regonized this device, unless in fastboot mode.
Click to expand...
Click to collapse
Lootron said:
Casper Young said:
Whoops. Yeah I'm sorry, I've always been a bit hasty. I have looked for my firmware, but would RCA give it to you? I forgot to say my processor is MT6513. Not MT6127.
Well, thanks for spending so much of your time for me though. You have been very helpful. For me, bricking it was a learning experience. I learned a LOT about how android works messing with this tablet, and come on, it was a crap-let I only decided to
"hack" it once we ordered a new one (The keyboard doesn't work anymore)
The day I did it, I got frustrated I couldn't unlock the bootloader, so I wanted to do something else, without thinking about it. LOL. Well, more learning for me. [End Qoute]
Welcome to the place where you gotta play it safe. Yes RCA does provide the firmware, here;s your like for that.
https://stockromfiles.com/download-rca-stock-rom/
Now what I don't understand is why RCA implies there's no different versions of the software and you have a possible bricked device. I have a few articles that say even if your bricked you can flash in the software. Here's the tutorial for using the SP flash tool and another software location. The Tutorial makes me wonder though because if you look at steps 1, 2 and 3 they're questionable, especially #3. I'll get back to you in a bit, gotta chore to do.
https://stockromfiles.com/rca-rct65...323c6df5dcc913b1e77a5c8f2bbfe10#comment-53815
Oh, and you have yet to learn about playing with Androids These RCAs don't count. They're completely different from flashing a Samsung Galaxy or any other Androids.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Hi, my BQ Aquaris U2 Lite won't boot, I unlocked its bootloader and when I restart it, it is stuck at the next screen:
Your device software can't be checked for corruption. Please lock the bootloader.
If no key pressed:
Your device will boot in 5 seconds
But nothing happens, it stays there.
Help please, thank you.
@help38
The first time that an Android device boots up, the bootloader ( the Android counterpart to Windows BIOS/UEFI ) starts running. It is basically a software program that contains a list of OS instructions to ensure the smooth functioning of the device. Once this bootloader is unlocked, the user can manually change what ROM image was set as default by the OEM, and customize the device according to its liking.
Simply unlocking the bootloader does NOTHING than the Android OS now is waiting for instruction what ROM to load and run
jwoegerbauer said:
@help38
The first time that an Android device boots up, the bootloader ( the Android counterpart to Windows BIOS/UEFI ) starts running. It is basically a software program that contains a list of OS instructions to ensure the smooth functioning of the device. Once this bootloader is unlocked, the user can manually change what ROM image was set as default by the OEM, and customize the device according to its liking.
Simply unlocking the bootloader does NOTHING than the Android OS now is waiting for instruction what ROM to load and run
Click to expand...
Click to collapse
Hi, thank you, but my phone is stuck at that screen and nothing happens, I can't boot Android, do you know what is happening?
I unlocked the bootloader with BQ Firmware Flash Tool, because the phone only loaded Android Recovery, and didn't boot up the OS.
I only want to recover my files and photos
Thank you again.
@help38
I think you've to flash a Custom ROM. Note that's only possible if USB debugging got enabled on phone before unlocking the bootloader took place.
jwoegerbauer said:
@help38
I think you've to flash a Custom ROM. Note that's only possible if USB debugging got enabled on phone before unlocking the bootloader took place.
Click to expand...
Click to collapse
How can I do that?
I didn't have USB debugging enabled, aren't there any other ways to recover my files?
Thank you.
help38 said:
How can I do that?
I didn't have USB debugging enabled, aren't there any other ways to recover my files?
Thank you.
Click to expand...
Click to collapse
No other methods, AFAIK
Even doing a Factory Reset doesn't relock the bootloader.
BTW: The 1st thing of all things an Android user should do is to enable USB debugging on his phone: that makes it all easier.
jwoegerbauer said:
No other methods, AFAIK
Even doing a Factory Reset doesn't relock the bootloader.
BTW: The 1st thing of all things an Android user should do is to enable USB debugging on his phone: that makes it all easier.
Click to expand...
Click to collapse
, thank you, but, do you know if there is someone who could recover the files by paying him?
I really want those files
help38 said:
, thank you, but, do you know if there is someone who could recover the files by paying him?
I really want those files
Click to expand...
Click to collapse
Repair service?
jwoegerbauer said:
Repair service?
Click to expand...
Click to collapse
I don't think they could, but I will try, thanks.
jwoegerbauer said:
Repair service?
Click to expand...
Click to collapse
They told me that they can't...
Do you know any other place to recover my photos?
Thank you again.
At least is there a way to unbrick the phone?
Thanks.
Help please
Hey everyone, i'm sorry if this isn't the right section to post that kind of stuff in, i have a galaxy s7 edge with a broken screen, it's unresponsive and it shows nothing, so it's pointless for me to plug a mouse via an OTG cable in order to operate it, other than the screen, i think it still functions though, it's relatively expensive to repair here in my country so i figured i might as well recover my data and get rid of it altogether afterwards, i don't have usb debugging enabled, and i don't how how to enable it via recovery mode (if it's possible that is), is there some way to like cast its display to a computer and use the latter the interact with it ? or at least access its storage ? i really have important data in the device, so if there's no way to recover it, i'll be forced to repair the screen, i really appreciate any help
Have you asked this already - like a year ago?
https://forum.xda-developers.com/t/samsung-galaxy-s7-edge-cracked-screen.3995855
So, no TWRP. Then flash a modified stock recovery of your own. Enable adb in it. Pull stuff if not encrypted. If not, root with SuperSu. Then pull stuff...
That was just guesswork. Try yourself what can be done...
CXZa said:
Have you asked this already - like a year ago?
https://forum.xda-developers.com/t/samsung-galaxy-s7-edge-cracked-screen.3995855
So, no TWRP. Then flash a modified stock recovery of your own. Enable adb in it. Pull stuff if not encrypted. If not, root with SuperSu. Then pull stuff...
That was just guesswork. Try yourself what can be done...
Click to expand...
Click to collapse
Yes i did, i completely forgot about it however ! anyway, there's no custom recovery (i figured it's pretty much a must just in case something like that happens, but it was too late unfortunately), i didn't search thoroughly yet, but i can't find already modified stock recovery files for the device (assuming there's any of course), and i don't know how to modify such files if that's possible, can you walk me though some steps ? although i thought i knew a little bit about that stuff, apparently it's not enough ! and thanks a lot, i really appreciate your help
Sisine said:
although i thought i knew a little bit about that stuff, apparently it's not enough
Click to expand...
Click to collapse
Same here. And that guesswork went wrong too as I forgot that you said in that other thread that usb debugging isn't enabled...
CXZa said:
Same here. And that guesswork went wrong too as I forgot that you said in that other thread that usb debugging isn't enabled...
Click to expand...
Click to collapse
It looks like i'm out of luck