hello everyone,
i recently picked up a cheap android tablet at a bootsale for £5, now its a bit slow, and needs an update since its running 2.1 still,
but... bring s me to my problem... how do i update a knock off? the firmware its running is of a different tablet so i need to find a way to port a tablet rom to it if thats possible? the spec of the tablet is...
256mb ram,
1.2ghz single core processor,
10.1 inch resistive touchscreen,
1 single button on the front of screen, usb input micro usb output, micro sd slot, volume rocker and lock button on side
any help would be nice im not a total noob with taking roms apart and editing code i just need somewhere to start, a similar device for example lol
cheers guys!!!
Related
Hi,
My tablet is stuck at the green robot logo and will not boot up. The specifications for the tablet is
Type SA10
Main Frequency 1.2GHz
Core Type Cortex A8
Six in One Architecture HD Video Decoder (2160P)
HD Video Encoder (1080P)
Audio Processor
Dual Mali-400 2D/3D Graphics
Panel Type TFT-LCD
Size 7”
Display Ratio 16:09
Resolution 800*480
Type Capacitive Multi Touch
Memory DDR3 512MB
Nand Flash MLC 4GB
TF Card Max: 32GB
Wireless Network WiFi IEEE 802.11 b/g
3G Model USB-Dongle
3G Standard WCDMA / CDMA EVDO
Camera 0.3M pixels
G-Sensor Yes
I\O DC-in 2.0mm DC-input jack 5V 2A
Earphone Jacket 3.5mm Stereo
USB Socket Mini 5 pin USB port ( OTG)
TF card socket Micro SD (Push-Push)
Mini HDMI
Loudspeaker & Mic
POWER, VOL+, VOL-, LOCK, MENU, HOME, RETURN, RESET
Battery Contain >13 WHr
Type & Rating Lithium-polymer Battery, 3.7V
Adaptor 5V / 2A
Working Time > 4 Hours Web browsing
OS Android ICS 4.0
Linux Kernel 3.0.8+
Language Support Support Multi Languages
Input Method Android Keyboard (Multi Languages)
Reset Method Reset Key (Hardware) + Reset Software
Please help with reset or flash instructions.
Thank you in advance
jhanile said:
Hi,
My tablet is stuck at the green robot logo and will not boot up. The specifications for the tablet is
Type SA10
Main Frequency 1.2GHz
Core Type Cortex A8
Six in One Architecture HD Video Decoder (2160P)
HD Video Encoder (1080P)
Audio Processor
Dual Mali-400 2D/3D Graphics
Panel Type TFT-LCD
Size 7”
Display Ratio 16:09
Resolution 800*480
Type Capacitive Multi Touch
Memory DDR3 512MB
Nand Flash MLC 4GB
TF Card Max: 32GB
Wireless Network WiFi IEEE 802.11 b/g
3G Model USB-Dongle
3G Standard WCDMA / CDMA EVDO
Camera 0.3M pixels
G-Sensor Yes
I\O DC-in 2.0mm DC-input jack 5V 2A
Earphone Jacket 3.5mm Stereo
USB Socket Mini 5 pin USB port ( OTG)
TF card socket Micro SD (Push-Push)
Mini HDMI
Loudspeaker & Mic
POWER, VOL+, VOL-, LOCK, MENU, HOME, RETURN, RESET
Battery Contain >13 WHr
Type & Rating Lithium-polymer Battery, 3.7V
Adaptor 5V / 2A
Working Time > 4 Hours Web browsing
OS Android ICS 4.0
Linux Kernel 3.0.8+
Language Support Support Multi Languages
Input Method Android Keyboard (Multi Languages)
Reset Method Reset Key (Hardware) + Reset Software
Please help with reset or flash instructions.
Thank you in advance
Click to expand...
Click to collapse
this might help u out :http://forum.xda-developers.com/showthread.php?t=1706918
fixing my enigma tab
i have the same problem with the enigma tablet, i tried flashing it but still wont work. specs are as follows
Available Colors
Silver
Size
179.4x110x11.05/11.25mm
Weight
525 gm
Screen
7.0" WVGA (800*480 Pixel)
Memory
ROM: 512 MB
RAM: 512MB
Processor
Qualcomm Snapdragon processor 800MHz
Connectivity
Citycell (CDMA1x/EV-DO: 800/1900Mhz)
Airtel, Banglalink, GrameenPhone, Robi, Teletalk (GSM/GPRS/EDGE/UMTS: 50/900/1800/1900/2100MHz)
Touch Screen
Capacitive Touch Screen
WiFi
802.11 b/g
Bluetooth
2.1+EDR
GPS
Assisted GPS (A-GPS)
USB
10-Pin Mini USB
Battery
Usage time up to 7 Hours
Standby time up to 140 Hours
3500mAH Internal
Other Hardware Features
Haptic feedback vibration
Accelerometer
Digital compass
G sensor
Virtual Keyboard
urgent help needed
Hi wondering if anyone can help me, I have a pulso tablet model is p10c. When I turn it on it has 2 boot up screens 1st one is a white screen with pulso written on it, supposed to just stay there for a few seconds then boot up with the android one. It just stays on the pulso one for ages then turns off, does anyone know how to fix it
2005linsay said:
Hi wondering if anyone can help me, I have a pulso tablet model is p10c. When I turn it on it has 2 boot up screens 1st one is a white screen with pulso written on it, supposed to just stay there for a few seconds then boot up with the android one. It just stays on the pulso one for ages then turns off, does anyone know how to fix it
Click to expand...
Click to collapse
I have this same tablet, and an wondering if you ever found a solution to this? Have you tried the reset button on the back...? maybe hold it in for awhile, see if it knocks it out of the boot loop....you never know!
TrueDoom said:
I have this same tablet, and an wondering if you ever found a solution to this? Have you tried the reset button on the back...? maybe hold it in for awhile, see if it knocks it out of the boot loop....you never know!
Click to expand...
Click to collapse
I forgot i posted this i have tried the reset buttonit didnt do nothing, do you have the same problem with yours
no brand tablet.. the only thing i know its A13 chipset n A0708-4G512M-JR-M3230-YXD01 on the board. stuck on android logo.
tried every button cant enter recovery.. got it from my uncle.
help me on my tablet stock on boot logo
Hello, help me on my tablet.
My tablet is TORQUE DROIDZ PUSH+
im stuck on boot logo! I try the hardReset but nothing happen
and i try press vol. Up and powr button to go on recovery and download mode still nothing,
help me pls. . . .
Thankyou. .
Hey Guys its simple but first try this go into recovery and erase your cache and hard reset.
Doesnt work then download your stock rom and connect your device to your pc and flash it via fastboot.
then reboot you should be good.
If you still want detailed instructions then just ask.
if you cant find your stock rom give me your tab details ill look it for you
KraCkaVeli33 said:
Hey Guys its simple but first try this go into recovery and erase your cache and hard reset.
Doesnt work then download your stock rom and connect your device to your pc and flash it via fastboot.
then reboot you should be good.
If you still want detailed instructions then just ask.
if you cant find your stock rom give me your tab details ill look it for you
Click to expand...
Click to collapse
Hello sir, can you please look at this thread http://forum.xda-developers.com/android/help/trying-to-flash-android-tablet-local-t3309400 .. I would appreciate it if you suggest me a ROM relative to what specs my tablet has. Google play is missing and I tried installing CM Gapps but it says Invalid OTA packages, missing scatter and evrything else seem to fail me. Respectfully asking for your help.
Basics. I have a Coby MID-7042 tablet. The touch panel cracked on it so it is useless and cost to much to get fixed. With that said I am now using the tablet as an Android TV. I have hooked the tablet up to my HDMI TV and am using a mouse on the USB port to control the tablet. The thing is I am thinking of ripping the tablet apart and removing the screen and battery and other items. The thing is if I remove the LCD screen then I cannot get into recovery if needed and I cannot see the system booting on the HDMI connection.
Is there any way to force the HDMI connection to be the primary or will this happen naturally when the LCD panel is disconnected?
Since Android is Linux shouldn't there be a value somewhere that allows the selection of what screen is the primary. I know this can be done since there are quite a few Android TV boxes out there that use the HDMI connection as the primary display.
If you can help at all that would be great!
Thanks
Hi,
I have the same problem. Searched Google and XDA forum, no answer found...
reddragon72 said:
Basics. I have a Coby MID-7042 tablet. The touch panel cracked on it so it is useless and cost to much to get fixed. With that said I am now using the tablet as an Android TV. I have hooked the tablet up to my HDMI TV and am using a mouse on the USB port to control the tablet. The thing is I am thinking of ripping the tablet apart and removing the screen and battery and other items. The thing is if I remove the LCD screen then I cannot get into recovery if needed and I cannot see the system booting on the HDMI connection.
Is there any way to force the HDMI connection to be the primary or will this happen naturally when the LCD panel is disconnected?
Since Android is Linux shouldn't there be a value somewhere that allows the selection of what screen is the primary. I know this can be done since there are quite a few Android TV boxes out there that use the HDMI connection as the primary display.
If you can help at all that would be great!
Thanks
Click to expand...
Click to collapse
Hi folks,
Has anyone ever had touchscreen issues with the 101 G9 Turbo?
I have a very simular issue to this post: http://forum.xda-developers.com/showthread.php?t=1458555&highlight=multitouch
I recently purchased two Archos G9 101 Turbo (1.5Ghz) tablets both had the same touchscreen defect. Video shown has "Developer options, Show touches" enabled. http://youtu.be/V5OYq9E5j1I
Anything more than a gentle touch on the screen will cause a number of additional touches in the surrounding area. Even holding the tablet from the rear using one hand will cause this problem.
I never had this problem with the original G9 101...
Is this normal or a genuine hardware defect?
I'm trying to work out if I should return them and get a replacement or go for a refund
Thanks
-Richard
I have a new 101 G9 Turbo and have no similar touch screen issues.
Sounds like a HW issue to me.
Sent from my ARCHOS 101 G9 16GB Turbo using XDA app
Extreme_One said:
I have a new 101 G9 Turbo and have no similar touch screen issues.
Sounds like a HW issue to me.
Sent from my ARCHOS 101 G9 16GB Turbo using XDA app
Click to expand...
Click to collapse
Is your model a 1.5Ghz/512Mb or 1.2Ghz/512Mb ? have you had it long?
Thanks
-Richard
As per my signature, it's 1.5GHz CPU, 1Gb RAM, 16Gb Flash. Had it about 2 weeks (bought to replace a smashed 80G9 non-turbo!)
Sent from my ARCHOS 101 G9 16GB Turbo using XDA app
Thanks.
I took them back to HMV they brought out another tablet with a very different serial number but again it had the same fault.
Might have to try a different store
-Richard
Touchscreen defect
Already got two Archos 101G9 Turbos with same problem.
Waiting for third device under guarantee. I hope this is a hardware bug from one batch.
Waiting already 8 weeks for new device, according to Archos ´waiting for spare parts to repair´.
Sounds they know what the problem is and dont swap for a new one.
Fingers crossed.
Frank
Super-Frank said:
Already got two Archos 101G9 Turbos with same problem.
Waiting for third device under guarantee. I hope this is a hardware bug from one batch.
Waiting already 8 weeks for new device, according to Archos ´waiting for spare parts to repair´.
Frank
Click to expand...
Click to collapse
Frank are yours also the 8Gb model?
I think it only affects recent (2012?) 8GB 1.5Ghz Turbo models with ICS pre-installed.
I've managed to get two older 16GB 1.5Ghz Turbo's with Honeycomb which are un-affected, they feel much more rigid and dont flex.
-Richard
rjpearce said:
Frank are yours also the 8Gb model?
I think it only affects recent (2012?) 8GB 1.5Ghz Turbo models with ICS pre-installed.
I've managed to get two older 16GB 1.5Ghz Turbo's with Honeycomb which are un-affected, they feel much more rigid and dont flex.
-Richard
Click to expand...
Click to collapse
Richard, I have the Archos 101g9 250Gb Turbo. I tried ICS pre-installed version, ICS rooted version, Android 3.2.
All the same problem.
It looks like software/driver problem because the screen rotates when I rotate the tablet when the touchscreen is not working.
Maybe if the tablet is hot, or busy, or coming back from stand-by. I cant find a cause yet, and now its already for two months at Archos for guarantee
Frank
Super-Frank said:
Richard, I have the Archos 101g9 250Gb Turbo. I tried ICS pre-installed version, ICS rooted version, Android 3.2.
All the same problem.
It looks like software/driver problem because the screen rotates when I rotate the tablet when the touchscreen is not working.
Maybe if the tablet is hot, or busy, or coming back from stand-by. I cant find a cause yet, and now its already for two months at Archos for guarantee
Frank
Click to expand...
Click to collapse
For those who experience problems with the lcd screen of there Archos, I can tell you why this happens.
I have an Archos 101 g9 250 gb Tablet. I now experience problems with my screen. When I press the bottom of the tablet the screen flickers, All kind of colors show.
My warranty is over, I contacted archos in France, China (manufacturer). No reply at all.
I found out that this is an problem that happens a lot with Archos tablet.
So what to do now. I opened it, checked the yellow ribbon that connects the lcd screen to the hardware of the tablet. See the pictures. After some fiddling I found out that the ribbon has a weak part.
The ribbon is made out of two parts. The connection to the lcd screen is 40 pin, while the ribbon itself is 20 pin. They soldered the 40 pin to the 20 pin. Where it is soldered together some pins are broken.
This 40 pin connection is on the bottom of the lcd screen. So, when you press on the bottom of the tablet, you automatically press on the connection.
I tried to repair it, but I found out that repairing is impossible. It is to small.
And now I can throw the tablet away.
My name is Reinier from the Netherlands.
Archose 101 g9 turbo 250gb with problem of display ribbon
poplemanie said:
For those who experience problems with the lcd screen of there Archos, I can tell you why this happens.
I have an Archos 101 g9 250 gb Tablet. I now experience problems with my screen. When I press the bottom of the tablet the screen flickers, All kind of colors show.
My warranty is over, I contacted archos in France, China (manufacturer). No reply at all.
I found out that this is an problem that happens a lot with Archos tablet.
So what to do now. I opened it, checked the yellow ribbon that connects the lcd screen to the hardware of the tablet. See the pictures. After some fiddling I found out that the ribbon has a weak part.
The ribbon is made out of two parts. The connection to the lcd screen is 40 pin, while the ribbon itself is 20 pin. They soldered the 40 pin to the 20 pin. Where it is soldered together some pins are broken.
This 40 pin connection is on the bottom of the lcd screen. So, when you press on the bottom of the tablet, you automatically press on the connection.
I tried to repair it, but I found out that repairing is impossible. It is to small.
And now I can throw the tablet away.
My name is Reinier from the Netherlands.
Click to expand...
Click to collapse
I also have this problem with my archose tablets, how can I buy this ribbon or any other resolution of repair?
Hello all, iv recently purchased the Acer T series monitor for use with windows 8, it is absolutely wonderful and extremely responsive with 10 point touch, IPS, and 1080. I was wondering where i should even start when trying to get this to work on my Razr. It needs only HDMI and a USB cable. i tried the obvious to just plug it in and the monitor worked but the touch didn't. Can someone at least point me in a right direction or just where i could get some more information because i have found absolutely nothing. i cant believe no one has tried to hook and android device to an external USB touchscreen. This would be awesome if i could use a HDMI android stick/ RPi with this instead of my phone.
Hi there everyone,
A neighbor brought me this tablet he bought on black friday. It's stuck on the Android Logo. It's a QFX IT-437.
Specs: Android Tablet
Android 4.2.2
7” Capacitive Screen 800x480 5 Point Touch
512 MB Built-In Memory
Dual Core Boxchip A20, Cortex A7, 1.0Ghz
8GB Built-In Storage
Supports External 3G Dongle
Supports TF/Micro SD up to 32GB
802.11 b/g Wi-Fi
Micro-USB Port
Micro-HDMI Port
3D Gravity Sensor
Google Play Store
Video
Camera
eBooks
Photo
Music
Built-In Speaker
Built-In Microphone
3.7V 2500mAH Battery
UL AC Adapter 100-240V 50-60Hz
OTG Cable
Physically looks just like that RCA tablet that was on sale on black friday as well. The difference is that this one doesn't have volume buttons. Only power button. I've searched everywhere and all tutorials I find say that to reset I have to press a volume button that this one doesn't have. It does have a reset button but it doesn't fix anything it only does a fast restart. Any suggestions ?
Hey Tekkaman1,
I was able to successfully reset QFX IT-437. Using Android Multi Tools v1.02b. There is video and link on detailed steps to installing Android ADB drivers and using the Android Multi Tools on Youtube. I am unable to post link to this video in this post. Search "Hard reset a tab using Android Multi tool" Should be first result Video is posted by My Tablet Guru.
tekkaman1 said:
Hi there everyone,
A neighbor brought me this tablet he bought on black friday. It's stuck on the Android Logo. It's a QFX IT-437.
Specs: Android Tablet
Android 4.2.2
7” Capacitive Screen 800x480 5 Point Touch
512 MB Built-In Memory
Dual Core Boxchip A20, Cortex A7, 1.0Ghz
8GB Built-In Storage
Supports External 3G Dongle
Supports TF/Micro SD up to 32GB
802.11 b/g Wi-Fi
Micro-USB Port
Micro-HDMI Port
3D Gravity Sensor
Google Play Store
Video
Camera
eBooks
Photo
Music
Built-In Speaker
Built-In Microphone
3.7V 2500mAH Battery
UL AC Adapter 100-240V 50-60Hz
OTG Cable
Physically looks just like that RCA tablet that was on sale on black friday as well. The difference is that this one doesn't have volume buttons. Only power button. I've searched everywhere and all tutorials I find say that to reset I have to press a volume button that this one doesn't have. It does have a reset button but it doesn't fix anything it only does a fast restart. Any suggestions ?
Click to expand...
Click to collapse