Hello
I came across a thread with this software , I receantly purchased a Galaxy s3 GT-I9300, from overseas.
Build # IMM76D. 19300ZSALED
Android Version 4.1.1
Base band version I9300XXLEF
I tried to load the driver pack 4-5 to my computer so I could root the phone and update the rom but the international drivers seem to work.
I cannot get it to connect and display the serial number on the screen. What driver should I use?
Thanks
afast1 said:
Hello
I came across a thread with this software , I receantly purchased a Galaxy s3 GT-I9300, from overseas.
Build # IMM76D. 19300ZSALED
Android Version 4.1.1
Base band version I9300XXLEF
I tried to load the driver pack 4-5 to my computer so I could root the phone and update the rom but the international drivers seem to work.
I cannot get it to connect and display the serial number on the screen. What driver should I use?
Thanks
Click to expand...
Click to collapse
Same problem here. I know i installed driwers well but toolkit still dont see my serial. When i go to recowery mode, im gettning number in toolikt witouth problem and write recowery near. I had simmilar problem when i use htc desire S which was s-on (and problem was solved when i unlock bootloader via htcdev), is that problem maby here too? How can i check is my galaxy s3 s-on or s-off?!
S-on is for htc only. It doesn't affect us.
Took me a few attempts with drivers. I think the thread had some alternative suggestions ...
Sent from my GT-I9300 using Tapatalk 2
Related
Hello guys.
Samsung Galaxy S3 GT-I9300
I was wondering if anyone could answer a few questions for me. I rooted my new phone using the toolkit method from this thread http://forum.xda-developers.com/showthread.php?t=1703488 and now i am confused about the firmware versions,and if the kernel was changed and such. I forgot to check all these versions before i rooted the phone,so have no idea if these are the original ones.
My phone is bought and used in Denmark,however the firmware suggests it is now a uk version looking at the country code could this be correct? If i look at this http://www.sammobile.com/firmware/?page=3&model=GT-I9300&pcode=HTD&os=1&type=1#firmware my AP/PDA number is the same,but the CSC number is different,is this normal?
this is apparently the stock samsung firmware for my phone PDA:I9300XXBLH3 CSC:I9300HTDBLH1 from the sammobil site, and after root mine says PDA/AP: I9300XXBLH3 CSC:I9300NEEBLH2
I would like to know if this is normal? Can i use the 4.1.1. jellybean (2012 October 4.1.1 PDA:I9300XXDLJ1 CSC:I9300HTDDLI1) on my phone using odin to flash it? Or do i have to find a firmware with exactly the same numbers as my current ones?
I am afraid i might have done something wrong,however everything works,and root checker says i have root access,and superuser is installed on the phone,if the toolkit has "updated" or changed my firmware/kernel to a uk one,does it matter?
Also,after root my phone now shows up as Galaxy Tab in utorrent,but it is still I9300 in my windows7, why is this?
Did toolkit 5.0 save my original rom/kernel/firmware before rooting? If so,where?
I would be extremely grateful for someone to easy my worrying
Thank You
Tsunamijhoe said:
Hello guys.
My phone is bought and used in Denmark,however the firmware suggests it is now a uk version looking at the country code could this be correct?
>>>>Yes if that's what has been flashed or that's what the original was .
this is apparently the stock samsung firmware for my phone PDA:I9300XXBLH3 CSC:I9300HTDBLH1 from the sammobil site, and after root mine says PDA/AP: I9300XXBLH3 CSC:I9300NEEBLH2
>>>>You have not changed your CSC see stickie/ index
I would like to know if this is normal? Can i use the 4.1.1. jellybean (2012 October 4.1.1 PDA:I9300XXDLJ1 CSC:I9300HTDDLI1) on my phone using odin to flash it? Or do i have to find a firmware with exactly the same numbers as my current ones?
>>>> Any firmware on any I9300 .
Also,after root my phone now shows up as Galaxy Tab in utorrent,but it is still I9300 in my windows7, why is this?
>>>>>Need to ask Utorrent
Did toolkit 5.0 save my original rom/kernel/firmware before rooting? If so,where?
>>>> No idea read the thread for the toolkit But very very unlikely .
BASICS
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Click to expand...
Click to collapse
Thank you for the answer. I understand everything now.. And it works fine.. I did however use the wrong firmware rom,so i got different operator,i found the correct stock firmware,and will be starting from scratch using the cf-root method with the correct stock rom.
Thank you
Hi I got the samsung galaxy s3 when i bought the mobile it was rooted but its unbranded as there were no logos on the mobile or on the mobile box. I unrooted the mobile and reset the binary counter back to 0, the firmware i installed than was original firmware from sammobile website, but later i found the firmware was customized and it wasn't complete. Finally I installed Samsung Kies and used the option of firmware upgrade and initialisation to restore my device to factory settings but when my mobile switched back on i was surprised to see s3 got firmware with vodafone settings, my mobile is simfree but now im not sure. can anyone please help me how i can get the original firmware on my s3 and samsung kies will recognize my device as after upgrade and initialisation when i connect the device to my pc i get the message samsung does not support the firmware and i cannot get firmware upgrade from kies.
really need help to sort it out.
First you need to determine what model the phone is. This can easily be determine under Settings>about device>Model number
If it says GT-I9300, then you have the international version, if not then google whatever it displays then it will tell you what version you have. depending on which version you have, you will need to go to the respective forum and download a ROM. Install this Rom in recovery mode (this is explained in another thread in Q&A)
mechryanc said:
First you need to determine what model the phone is. This can easily be determine under Settings>about device>Model number
If it says GT-I9300, then you have the international version, if not then google whatever it displays then it will tell you what version you have. depending on which version you have, you will need to go to the respective forum and download a ROM. Install this Rom in recovery mode (this is explained in another thread in Q&A)
Click to expand...
Click to collapse
No remove battery and read SSN for a true version .
BASICS
http://forum.xda-developers.com/newreply.php?do=newreply&p=34206496
jje
Wrong firmwere installed my galaxy k
I have Samsung galaxy k . i have installed wrong firmware of galaxy s.now my phone is bricked.i cant on my phone.no light.i want to my phone back position so what can i do?????? plzz help me...
nildhoa said:
I have Samsung galaxy k . i have installed wrong firmware of galaxy s.now my phone is bricked.i cant on my phone.no light.i want to my phone back position so what can i do?????? plzz help me...
Click to expand...
Click to collapse
Take the phone to a service centre and pay for repair we cannot help you .
This is not Galaxy K forum either nor Galaxy S
jje
Hello guys!
I am new to this forum and to this problem too. I do not have much experience in "phones". Anyway here it is my problem. I have recently got a CHINESE Samsung Galaxy S3 from a friend because he complained he cannot use it due to the Invalid IMEI error. Yes, it is a clone at a price of around 150$. Besides the fact that the IMEI shows as INVALID , the phone is 90% like the real one. The 10% consists of the poorer display resolution and the fact that the AUDIO does not work while using the JB 4.1.1 OS. There is no hardware problem because this Chinese phone also has a separate OS for "tests"( where you can test if the features of the phone are working properly...i dont know if the original one has this "sub-OS" too. On this "Sub-OS" there also is a feature called "Version" where it shows the properties of the phone. However, when it comes to the IMEI it says UNKNOWN). Now when I enter the "About Phone" in JB 4.1.1 I get this information:
Model Number: GT-I9300
Android Version: 4.1.1
Baseband Version: I9300XXLEF
Kernel Version: 3.0.15-570657-user [email protected]#1 SMP PREEMPT Wed May 23 09:05:19 KST 2012
Build Number: IMM76D.I9300.ZSALED.9P017.6628
*** I don't know if this makes any sense but my PC found this Phone while USB Connected as Android mt65XX Phone
I Also tried that SUPERONECLICK program and tried ROOTING it. At the first attempt the program announced me that the OS has Already been Rooted ( Which I think it is normal since the phone is not original) I cannot use the POWER+HOME+Volume Down option ( Maybe because the phone is not original) so I cannot get into the DOWNLOAD Mode ( or smth like that)
What can I do to get a working IMEI so that i can make Phone calls. I live in Romania ( Europe ) and the phone recognises my SIM Operator ( Cosmote). So...any hope for my friend or he has to return his phone? :/ Thanks!
you won't have any support for it here, sell that piece of crap
Glebun said:
you won't have any support for it here, sell that piece of crap
Click to expand...
Click to collapse
What do you mean by that? The policy of the forum does not allow fake phones or you simply don't know how to do it?
Universal11 said:
What do you mean by that? The policy of the forum does not allow fake phones or you simply don't know how to do it?
Click to expand...
Click to collapse
I mean that this section is for the i9300, and your device has almost nothing in common with it
Yeah, he is right this forum its exclusive for s3, its imposible for anyone to help you because you device only its a copy bro.. u have jelly bean and all stuff of galaxy s3, but support you it's completely imposible, only its possible with the original device because anyone in this forum known how your phone's works
Good luck bro!
Enviado desde mi GT-I9300 usando Tapatalk 2
Search google for mt65XX Phone forum .
As said its not SGS3 I9300 .
jje
Hi Everyone Just Join This Forum Please Forgive me if i am posting in wrong section. Recently Bought Samsung Galaxy S3 4G LTE it was on 4.0.4 Firmware after few days use I successfully upgrade it to 4.1.2 Firmware Through Samsung Kies. While surfing i found Firmware upgrade 4.2.1 - I Upgrade to 4.2.1 with Odin 3.o.7 the whole process completed and I got Pass Message.But after Reboot phone stuck at Samsung Galaxy SIII Screen.I Boot in recover mode and do the factory default but after reboot stuck @ same screen.
I Hope Some one Can Guide me step by step to solve my problem.
I am able to enter phone in download and recovery mode.
when i Power off it Shows Battery Charging if connected to PC.
Samsung Galaxy S3 I9300 4GLTE (SHVE210S)
there is no i9300 LTE. if you flashed the firmware for the i9300, you've most probably killed your device.
boot into download and flash a stock rom FOR YOUR PHONE
Glebun said:
there is no i9300 LTE. if you flashed the firmware for the i9300, you've most probably killed your device.
boot into download and flash a stock rom FOR YOUR PHONE
Click to expand...
Click to collapse
Thanks for the Prompt Reply
How to find the appropriate firm ware for my phone
in about phone there was I9300 on Back Cover 4G LTE Written
Its Koren Version quad Core 32GB
below is the link
h**p://w**.gsmnation.com/samsung-galaxy-s-iii-shv-e210s-32gb-lte-pebble-blue.html
Personata said:
Thanks for the Prompt Reply
How to find the appropriate firm ware for my phone
in about phone there was I9300 on Back Cover 4G LTE Written
Its Koren Version quad Core 32GB
Click to expand...
Click to collapse
you will have to get it off sammobile on the site click firmware then search for your device
Ryanscobberwash said:
you will have to get it off sammobile on the site click firmware then search for your device
Click to expand...
Click to collapse
I Tried One From There and many from other sources But it didn''t work maybe I didn''t choose the right one
These are the info written on the sticker under battery
KCC-CMM-SEC-SHVE210
FCC ID - A3LSHVE210S
S/N - R33C71F34KM
IMEI - 35XXXX0XXXXXX44
2012075
0610504
imgbox.com/acxIZhmn
imgbox.com/abmMmNlb
Hope someone have the same set who can guide me to proper firmware
Google search for your phone model .
jje
JJEgan said:
Google search for your phone model .
jje
Click to expand...
Click to collapse
Ok Done I was Flashing with the wrong firmware
I Search for SHVE210S and i found the correct firmware which was just release for SHVE210S
Thank u all for ur replies
I tried almost every one click application that exist, and all of them are failed... (kingo, etc.)
so, i found a thread here about similar model
http://forum.xda-developers.com/android/help/sm-g318h-root-t3151992
In that thread i have a firmware that fit to Galaxy Trend 2 Lite G318H, the model number it is the same as my phone,
but, the build number and the kernel number , and the serial number are different.
so, is that firmware would fit to my phone? it is safe to do it with Odin?
(i am afraid to lose my phone accidentally, or to do something wrong)
my phone details:
Galaxy Ace 4 Neo (SM-G318H)
android 4.4.4
Build: G318HXCU0AOH1
Kernel: 3.10.17-773113
Serial: KTU84P.G318HJPU0AOH2
thank you!
Update: i was succeeded with the new version of Kingo