I tried almost every one click application that exist, and all of them are failed... (kingo, etc.)
so, i found a thread here about similar model
http://forum.xda-developers.com/android/help/sm-g318h-root-t3151992
In that thread i have a firmware that fit to Galaxy Trend 2 Lite G318H, the model number it is the same as my phone,
but, the build number and the kernel number , and the serial number are different.
so, is that firmware would fit to my phone? it is safe to do it with Odin?
(i am afraid to lose my phone accidentally, or to do something wrong)
my phone details:
Galaxy Ace 4 Neo (SM-G318H)
android 4.4.4
Build: G318HXCU0AOH1
Kernel: 3.10.17-773113
Serial: KTU84P.G318HJPU0AOH2
thank you!
Update: i was succeeded with the new version of Kingo
Related
Hi all,
I have bought a second hand Samsung Galaxy S 2 in China.
The Android version installed is 2.3.3; I tried to do an update via Kies but I got the infamous message that "firmware update is not supported" for my device. I understand from other posts in the forum that maybe the firmware installed is not matching with the original region of the device, in this case I should install the right firmware in order to get the support from Kies, am I right?
But my question is...how do I know the original firmware/region for my model?
The data of the device are the following:
Model Number: GT-I9100
Android Version: 2.3.3
Baseband version: I9100XXKE4
Kernel version: 2.6.35.7-I9100XWKE7-CL215725 [email protected] #2 (does this mean the phone has been rooted?)
Build Number: QUENS.GINGERBREAD.XWKE7
Plus, when I connect to Kies the current firmware version detected is:
I9100XWKE7/I9100XEUKD1/I9100XXKE4/I9100XWKE7 (DBT)
Sorry for the noob question, I tried to figure out from the sticky post and used search but I am still confused...(yes, I got intimidated by the welcoming video of the forum)
Thanks
shandess said:
Hi all,
I have bought a second hand Samsung Galaxy S 2 in China.
The Android version installed is 2.3.3; I tried to do an update via Kies but I got the infamous message that "firmware update is not supported" for my device. I understand from other posts in the forum that maybe the firmware installed is not matching with the original region of the device, in this case I should install the right firmware in order to get the support from Kies, am I right?
But my question is...how do I know the original firmware/region for my model?
Its not posible to know without evidence guess maybe.
The data of the device are the following:
Model Number: GT-I9100
Android Version: 2.3.3
Baseband version: I9100XXKE4
Kernel version: 2.6.35.7-I9100XWKE7-CL215725 [email protected] #2 (does this mean the phone has been rooted?)
NO its the signature
Build Number: QUENS.GINGERBREAD.XWKE7
That reads as a custom rom by Quens ???
Plus, when I connect to Kies the current firmware version detected is:
I9100XWKE7/I9100XEUKD1/I9100XXKE4/I9100XWKE7 (DBT)
If its a i9100 and no other version pick a stock rom from the stock roms posts .
With later firmware and to match region phone is used in .
jje
Click to expand...
Click to collapse
hey guys, i know your gonna say there are alot of guides out thier but buy galaxy S2 is a carrier S2 so my model number is GTI9100T, its from my isp Telecom in nz, i relay wanted to root it to have a rom on thier called Neat rom Lite but i haunt found a guide to rooting my type of phone yet. my phone details are
Model number : GT-I9100T
Android version - 4.0.3
Baseband : I9100TDOLP4
Kernel version: 3.0.15-I9100TDOLP7-CL710191dpi.DELL140 #3
Buildnumber : IML74K.DOLPif there any rooting guides out there thanks
ps my phone isnt the international version.
ExynosAbuse.
Sent from the little guy
Hello
I came across a thread with this software , I receantly purchased a Galaxy s3 GT-I9300, from overseas.
Build # IMM76D. 19300ZSALED
Android Version 4.1.1
Base band version I9300XXLEF
I tried to load the driver pack 4-5 to my computer so I could root the phone and update the rom but the international drivers seem to work.
I cannot get it to connect and display the serial number on the screen. What driver should I use?
Thanks
afast1 said:
Hello
I came across a thread with this software , I receantly purchased a Galaxy s3 GT-I9300, from overseas.
Build # IMM76D. 19300ZSALED
Android Version 4.1.1
Base band version I9300XXLEF
I tried to load the driver pack 4-5 to my computer so I could root the phone and update the rom but the international drivers seem to work.
I cannot get it to connect and display the serial number on the screen. What driver should I use?
Thanks
Click to expand...
Click to collapse
Same problem here. I know i installed driwers well but toolkit still dont see my serial. When i go to recowery mode, im gettning number in toolikt witouth problem and write recowery near. I had simmilar problem when i use htc desire S which was s-on (and problem was solved when i unlock bootloader via htcdev), is that problem maby here too? How can i check is my galaxy s3 s-on or s-off?!
S-on is for htc only. It doesn't affect us.
Took me a few attempts with drivers. I think the thread had some alternative suggestions ...
Sent from my GT-I9300 using Tapatalk 2
Hi, I got this new Galaxy Tab from Korea and I'm wondering how am I supposed to root it? I have no experience on rooting whatsoever, so I really need exact and guaranteed instructions. I tried rooting my tab twice, it ended in a Coma Brick twice and I had to send it to Samsung Help desk twice to repair it.
Here's my Specs:
Model Number: SHW-M180S
Firmware Version: 2.3.6
Baseband Version: M180S.FE18.1503.ST
Kernel Version: 2.6.35.7 [email protected] #2
Build Number: GINGERBREAD.UF08
I need precise and accurate information. Thank you.
Not really sure if this is the Samsung Galaxy Tab 10.1 since its Gingerbread 2.3.6. Stock Galaxy Tab 10.1 comes with Honeycomb 3.1.
Sent from my GT-P7500 using Tapatalk 4
AnthonyXTrace said:
Hi, I got this new Galaxy Tab from Korea and I'm wondering how am I supposed to root it? I have no experience on rooting whatsoever, so I really need exact and guaranteed instructions. I tried rooting my tab twice, it ended in a Coma Brick twice and I had to send it to Samsung Help desk twice to repair it.
Here's my Specs:
Model Number: SHW-M180S
Firmware Version: 2.3.6
Baseband Version: M180S.FE18.1503.ST
Kernel Version: 2.6.35.7 [email protected] #2
Build Number: GINGERBREAD.UF08
I need precise and accurate information. Thank you.
Click to expand...
Click to collapse
Well considering... according to Google that it's a Samsung Galaxy 7 SHW-M180S Korea
If your trying to root and flash a rom from here might explain why you had to send it back twice...
Head over to here and take a look!
I have the s2 and I want to root it. It is the GT-i9100M (I think the M is causing some challenges from Bell Canada)
Model Number : GT-i9100M
Android Version : 4.1.2
Baseband version : i9100MUGMA5
Kernel Version : 3.0.31-900488
se.infra (AT) ep-127 #3
Build Number : JZ054K.19100MUGMA5
Here is the background : I have purchased a Gear Fit to use with this device, but I need 4.3 on the phone.
I have tried to upgrade the device to no avail using the One-Click method. It tells me that it is not compatible. I have been researching and it seems I need to root the device first and then upgrade the firmware manually. I went to Android Central and they said I need to flash a Custom ROM. So if possible could someone send me in the right direction?
If any of this sounds wrong, please let me know. I don't want to brick the phone, but would like to upgrade the device. Any help would be greatly appreciated!