iv looked and i have got quotes......
200 to 250 from some idiot..
are there any other models that would fit like the e973?
my lcd is fine and i have heated the old touch screen off
But if i have to buy both thats fine (lcd and Digitizer)
can someone point me in the right direction. i would love you forever :fingers-crossed:
Related
Hello,
first let me say how glad i am that this forum exists.
I´ve got an Wallaby (MDA1) which has an broken LCD Touchscreen. But only the Sensorpad is broken, not the LCD. Is it possible to change the Touchsensor only without the LCD Display? Is the Sensor glued on the LCD diplay or just layed over or pressed by screws?
I would be glad for good news....
Now i know much more.....
the sensorpad can be changed. at Ebay the hole sensorpad is available for 29€. The Pad (Glas with glued foil) is glued on the case of the LCD. Now i have ordered the Sensorpad and i´ll tell you how it´s ended....
LCD Touch screen display
Hi!
I just bought a kind of this touchpad. As you wrote, on ebay is easy to buy a piece. But, there are huge differences between the prices! I ordered this item:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=300146530292&ssPageName=STRK:MEWA:IT&ih=020
On the picture seems the backlight's flex cable, but in the packet is the good part. The touchpad on a pane of glass.
I think, this is the cheapest price on ebay. The packing and shipping was good, the seller is OK!
Successfully changed!
Yesterday I successfully changed a touch screen display on a Wallaby.
I had a device, with broken display. I saw, just the LCD was broken. Touch screen was unscathed. It is not too difficult to disassemble the complete display. The touch screen comes out with the plastic and metal frame.
Why is it interesting? Because I had the typical screen alignment "loop" failure. So, I can say, that this is definitely hardware failure. Exactly, the fail of the touch screen layer!
I´ve changed the Touchpad today. It works but the display doesnt.F**K. So i have to look for a hole new display....
My Touch HD, for 9 months now, perfectly works with the screen cracked.
Touch is ok, no problem.
No pixel missing (only the distortion from the cracks thats barely visible from straight look).
I'd like to change it my self but i dont know what to change....!!
touch screen: viewitem.eim.ebay.gr/HTC_Touch_HD__T8282_LCD_Screen_Display__Tools_New/220603358520/item
or
LCD: viewitem.eim.ebay.gr/Tctil_Pantalla_wGlass_Lens_Para_HTC_Touch_HD__T8282/150367803789/item
But it works now, if the risk changing it myself is high, from killing it, is it better to leave it as it is?
P.S. I had changed my screen 1 year ago and I payed 268€ (it cracked in 3 months after htc service)
Thnx in advance
it's probably the lcd since the touchscreen (digitizer) is made out of plastic. I don't think that'll crack very easily
OK i have a similar question...
But first of all can someone please clarify if the OP has the items the other way around? I mean is touchscreen (digitizer) the outer casing with the plastic screen and LCD the inside part?
OK now to my question. I dropped my phone and scratched the outer casing. Everything works fine but i would like to change the touchscreen just for aesthetics. Reading many many many tutorials i noticed most people faced problems trying to replace lcd screen only or touchscreen only and prefer to buy the bundle. My question is if i buy the touchscreen that the OP states here : viewitem.eim.ebay.gr/Tctil_Pantalla_wGlass_Lens_Para_HTC_Touch_HD__T828 2/150367803789/item isn't just a matter of connecting the digitizer to my existing LCD? Are they connected with a conducting adhesive tape as i was reading on the tutorials? Or this is not the part connected with the adhesive?
Thanks a lot for the help and sorry for hijacking the thread.
I've changed only the digitizer in my Blackstone but its really difficult job and took me about half day to finish. The digitizer its glued to LCD and you need to be very careful to separate them. I've done it only because i bought this HD very cheap for parts but next time will probably buy the whole part (LCD+Digitizer).
don't change digitizer
my touch-panel was not working correctly,i bought a digitizer to change it self but the lcd is broken ... impossible don't try.
i recommend you to buy complete set lcd+digitizer , its need only one click on motherboard
be carefully
metbod said:
my touch-panel was not working correctly,i bought a digitizer to change it self but the lcd is broken ... impossible don't try.
Click to expand...
Click to collapse
It's possible, I did it yesterday
A few weeks ago, whilst changing a flat tire, I broke the LCD screen of my beloved X10 Mini Pro. After no useful response from SE, i decided to do the repairs myself. It turned out quite easy to do. For those that might need a hand in replacing the Front cover digitizer and/or the LCD screen, I put up some pictures of the procedure on my Picasa account:http://picasaweb.google.com/116771174771089812262/X10MiniProScreenRepair?feat=directlink.
The Digitizer and LCD screen is available on Ebay by many different vendors.
All in all for about $50 dollars a replacement LCD screen. If u have a broken screen u might consider doing it yourself, as it was very easy and took about 30 minutes.
Thank you!
I plan to do this someday, of all my phones the X10's plastic gets scratched the easiest!
I always keep the phone in my pocket by itself, and somehow all the edges of the front screen have micro scratches on all sides.
Hi
i would like to ask you about the quality of the new digitizer is it the same as the original or not as responsive.?
thanks
I replaced the LCD screen only, not the digitizer, so I can't answer your question.
However I think if u replaced it with another it would be as good as any other new one? The screen I replaced was as good in any case...
Sent from my U20i using XDA App
Thanks a lot. For 50 $ i bought lcd screen AND digitizer on ebay. Good quality. And it took me 20 minutes with your help.
Can u tell me how to change the rear speaker
Hi guys,
Just got myself a desire 610 and wondering if I need to replace the whole unit as iv smashed my screen. Seen only digitizers on eBay and one video of a guy changing a whole unit. I.E front frame / digi / LCD.
Has anyone changed there's and if so how did they do it?
Digitizer only or the whole unit?
Only my digi is cracked but some help would be very nice as to choose the right part I need. Thanks
I guess the Desire 610 is manufactured like the others meaning :
The LCD screen is glued to the digitizer.
The Digitizer and the back of the LCD are both glued to the chassis.
And it sticks damn hard...
There are very poor chances that you will be able to separate the LCD from the digitizer without cracking the LCD which is very fragile.
Even if you manage to do it there are again big chances that you will experience problems with the digitizer afterwards (lag, no reaction, disalignment, dust in between).
Don't waste your time, buy a complete set (LCD + digitizer) factory assembled (meaning glued already).
That's what I always do.
Hi everyone
After a fall The touchscreen of my p9000 no longer works but the lcd screen still works. Do you think it possible to just change the touch screen with this piece? if yes do you have a tutorial that allows you to disassemble only this part and not all the screen?
I bought the screen (lcd and digitizer) for $28.
You can even find it for $20 so you can just buy the whole deal
vajs said:
I bought the screen (lcd and digitizer) for $28.
You can even find it for $20 so you can just buy the whole deal
Click to expand...
Click to collapse
Where you find it for 20$ ?