Hye guys, for the past few days I've been dealing with Huawei Mediapad 7 because it stuck at the bootloop. I flashed the CM10 but use the latest kernel posted at the end of the thread. What should I do now? I can't even get into the recovery mode.
Hi
Do you use CM10 or CM10.1?
Have your overclocked?
Greets
Sent from my Nexus 4 using xda app-developers app
Please Post everything you see or feel (vibration) while starting up your device.
Greest Gunnar
Torstiko said:
Hi
Do you use CM10 or CM10.1?
Have your overclocked?
Greets
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I use CM10 and not overclocked. I was using CM10.1 with the latest kernel, then I flashed back CM10. My guess, I forgot to wipe data before I flash CM10 so that's why it crshed with the kernel version.
GunnarWeibrink said:
Please Post everything you see or feel (vibration) while starting up your device.
Greest Gunnar
Click to expand...
Click to collapse
the vibration is as usual, I can see the cyanogen bootlooping and it stays like that.
I guess, CM10.1 kernel is not compatible with CM10. So try return to original kernel by using recovery.
Torstiko
Sent from my Huawei MediaPad using xda app-developers app
Yes, this should have to be done...
- start into TWRP (pad shutting off, then pressing power and "right" together, release power but keep pressing "right" after vibration)
- do a complete wipe (Cache/Dalvik-Cache, Factory (Data) and System)
- install a new firmware as you whish
Greets Gunnar
Either recovery mode or adb should work, or it's time to surrender.
The pad may be frozen, then it needs a coldstart by pressing powerbutton for at least ten seconds. Maybe you gotta release the button shortly, then press again along with volume button.
Freeze state may have emptied the battery, then charge first. If the battery's protective circuit has cut it off, the charge controller will not immediately recognize it, should then begin charging when plugged in a second time.
lecorbusier said:
Either recovery mode or adb should work, or it's time to surrender.
The pad may be frozen, then it needs a coldstart by pressing powerbutton for at least ten seconds. Maybe you gotta release the button shortly, then press again along with volume button.
Freeze state may have emptied the battery, then charge first. If the battery's protective circuit has cut it off, the charge controller will not immediately recognize it, should then begin charging when plugged in a second time.
Click to expand...
Click to collapse
GunnarWeibrink said:
Yes, this should have to be done...
- start into TWRP (pad shutting off, then pressing power and "right" together, release power but keep pressing "right" after vibration)
- do a complete wipe (Cache/Dalvik-Cache, Factory (Data) and System)
- install a new firmware as you whish
Greets Gunnar
Click to expand...
Click to collapse
Torstiko said:
I guess, CM10.1 kernel is not compatible with CM10. So try return to original kernel by using recovery.
Torstiko
Sent from my Huawei MediaPad using xda app-developers app
Click to expand...
Click to collapse
THANK YOU EVERYONE..I LOVE YOU ALL..I DON'T KNOW HOW I CAN REPAY YOU!! :thumbup:
Sent from my C1605 using xda app-developers app
Just wondering, what the problem was and how you solved it.
Torstiko
Sent from my Nexus 4 using xda app-developers app
Torstiko said:
Just wondering, what the problem was and how you solved it.
Torstiko
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
After I got into the TWRP, I wiped all data and turn on the tab. Got into the homescreen but error on the AOSP android keyboard so there I know, cm10.1 kernel isn't compatible with cm10 version. I flashed the cm10.1 again as to suits the kernel. Done.
Sent from my C1605 using xda app-developers app
Hmmm... maybe this was the misunderstood post:
amruhaidy said:
I use CM10 and not overclocked. I was using CM10.1 with the latest kernel, then I flashed back CM10. My guess, I forgot to wipe data before I flash CM10 so that's why it crshed with the kernel version.
Click to expand...
Click to collapse
Didn't realize, that you mean only kernels to flash...
Greets Gunnar
huawei media tab stuck on boot screen i tried to wipe to factory reset but still its stuck on boot screen notification light blinks when it is placed on charge..help please
Related
unexpectedly stopped working the buttons tactile "Search", "Back" and "Menu", only serves the home. is not hardware problem because occasionally work, I need help here thanks.
Rom CM9
alejobog said:
unexpectedly stopped working the buttons tactile "Search", "Back" and "Menu", only serves the home. is not hardware problem because occasionally work, I need help here thanks.
Rom CM9
Click to expand...
Click to collapse
Have you tried doing a factory data reset from recovery mode? Couldn't hurt to delete cache partitions as well.
Sent from my SGH-T959 using xda premium
iTz KeeFy said:
Have you tried doing a factory data reset from recovery mode? Couldn't hurt to delete cache partitions as well.
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
all you have done and not work, install the original rom ODIN and does not work, since recovery Cahe wipe, wipe Dalvik all, sometimes it works and sometimes not buttons
alejobog said:
all you have done and not work, install the original rom ODIN and does not work, since recovery Cahe wipe, wipe Dalvik all, sometimes it works and sometimes not buttons
Click to expand...
Click to collapse
Sorry but I have to ask, are you sure your running a Samsung vibrant ROM? I have heard people talk about having button problems but that's usually when they flash a ROM meant for the samsung i9000. If you are positive your running a Vibrant ROM then look in the thread for your ROM and look for a button fix, usually in the .zip format. If your ROM was ported over from a different phone then there would be a button fix somewhere, if you can't fix it then use this app until we figure out your problem
App- http://www.google.com/url?sa=t&sour...psyKBw&usg=AFQjCNEqdozuMX3yXQN9zIt2ZAO6X_XEuA
Sent from my SGH-T959 using xda premium
changes for one new.
[ Hagen ] said:
changes for one new.
Click to expand...
Click to collapse
Not sure what your talking about....
Sent from my SGH-T959 using xda premium
If you flashed back to stock and it still didn't work, it is a hardware problem. Try (after flashing to stock) take it back to the T-Mobile store.
Why does the Nexus 10 not have a Reboot option when I long press the power button?
My N10 is rooted but stock. Other than flashing a custom ROM is there a way to add a reboot option?
sonny_c said:
Why does the Nexus 10 not have a Reboot option when I long press the power button?
My N10 is rooted but stock. Other than flashing a custom ROM is there a way to add a reboot option?
Click to expand...
Click to collapse
Unless somone makes a flashable zip, currently no. Until I flashed a custom rom I used terminal emulator for 'su' then 'reboot'.
A lot more work but it gets the job done.
duarian said:
Unless somone makes a flashable zip, currently no. Until I flashed a custom rom I used terminal emulator for 'su' then 'reboot'.
A lot more work but it gets the job done.
Click to expand...
Click to collapse
Thanks duarian!
Add a reboot widget using titanium backup
Sent from my Nexus 10 using xda app-developers app
There's an app called QuickBoot in the PlayStore that works well if you're rooted.
brGabriel said:
There's an app called QuickBoot in the PlayStore that works well if you're rooted.
Click to expand...
Click to collapse
+1 for this. I use it and it works great. You can add an application shortcut on one of your homescreens to reboot, reboot to bootloader or reboot to recovery.
Have u tried to hold the power button when u are on lockscreen until the display is off ?
Sent from my Incredible S using xda premium
This ROM can be flashed over the top of your current, and has the options you're looking for: http://forum.xda-developers.com/showthread.php?t=2043633
Edit: Sorry, my first post is a link... but I just installed it myself and noticed you were asking.
Appreciate all the suggestions. Thanks guys.
sonny_c said:
Why does the Nexus 10 not have a Reboot option when I long press the power button?
My N10 is rooted but stock. Other than flashing a custom ROM is there a way to add a reboot option?
Click to expand...
Click to collapse
Stock Nexus ROMs never had a reboot option. You can only get it via a ROM or some mod.
There is a reboot option on stock. You need to press and hold power button for about 6 seconds.
Sent from my Nexus 7
kkh786 said:
There is a reboot option on stock. You need to press and hold power button for about 6 seconds.
Sent from my Nexus 7
Click to expand...
Click to collapse
I meant in the power menu. Is that method a safe method? I feel like it's the same as holding the power button for 10 seconds on a PC. It turns off but it doesn't save anything.
It is the same only without a widget or something else xd
Sent from my Incredible S using xda premium
Hello. I downloaded TWRP 2.6.0.0 from here: http://teamw.in/project/twrp2/185 for my SGP311.
And flashed it using instructions on page:
su
dd if=/sdcard/fotakernel.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Then I couldn't figure out how to boot into the recovery! I decided this might be the time to READ the page
They say something about CM. I don't want to flash any ROM yet, I'm on stock 4.1.1 (build 370), I just want to boot the device into my TWRP and couldn't find instructions.
So how do I start TWRP?
My Gnexi said:
Hello. I downloaded TWRP 2.6.0.0 from here: http://teamw.in/project/twrp2/185 for my SGP311.
And flashed it using instructions on page:
su
dd if=/sdcard/fotakernel.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Then I couldn't figure out how to boot into the recovery! I decided this might be the time to READ the page
They say something about CM. I don't want to flash any ROM yet, I'm on stock 4.1.1 (build 370), I just want to boot the device into my TWRP and couldn't find instructions.
So how do I start TWRP?
Click to expand...
Click to collapse
im not sure but i think its volume down instead of volume up
arcsuser said:
im not sure but i think its volume down instead of volume up
Click to expand...
Click to collapse
Not working, volume down starts with "safe mode", other combinations start normally or blinking LED or do nothing at all, how do I get to my TWRP?
should have bought Nexus 10
My Gnexi said:
Not working, volume down starts with "safe mode", other combinations start normally or blinking LED or do nothing at all, how do I get to my TWRP?
should have bought Nexus 10
Click to expand...
Click to collapse
safe mode? i didnt see any safe mode when i tried it.. maybe you're in the wrong way.. lol
anyway i got my twrp from this Post
and to boot to twrp its volume down..
How to use:
At boot, once you feel the phone vibrate and see the green led;
- press VOL-UP for CWM;
- press VOL-DOWN for TWRP.
Click to expand...
Click to collapse
Hope it helps
arcsuser said:
safe mode? i didnt see any safe mode when i tried it.. maybe you're in the wrong way.. lol
anyway i got my twrp from this Post
and to boot to twrp its volume down..
Hope it helps
Click to expand...
Click to collapse
is CWM built-in to the device? or just in case the person is using CWM instead of TWRP? thanks
mrjayviper said:
is CWM built-in to the device? or just in case the person is using CWM instead of TWRP? thanks
Click to expand...
Click to collapse
Its a dual recovery sir
But i believe twrp still has a bug i think, not sure..
Sent from my SGP311 using xda app-developers app
arcsuser said:
Its a dual recovery sir
But i believe twrp still has a bug i think, not sure..
Sent from my SGP311 using xda app-developers app
Click to expand...
Click to collapse
I can have twrp and cwm at the same time? first time I've heard of that. thanks
mrjayviper said:
I can have twrp and cwm at the same time? first time I've heard of that. thanks
Click to expand...
Click to collapse
Yah, you can have it both at the same time from the post i gave..
But like i said twrp on this one has bug..
Sent from my SGP311 using xda app-developers app
arcsuser said:
Its a dual recovery sir
But i believe twrp still has a bug i think, not sure..
Sent from my SGP311 using xda app-developers app
Click to expand...
Click to collapse
Well, I did it!
I dd-restored the fotakernel to what it was before. Then I flashed using the post you linked and indeed I have 2 recoveries.
It seems like booting into recovery is not as easy as in my Galaxy Nexus. You have to tap the volume repeatedly while booting, hoping it will work.
Saying that twrp has a bug is a little understatement. I couldn't get out!
Tried to adb reboot but got "???????????? no permissions"
Eventually solved it by putting
SUBSYSTEM=="usb", ATTR{idVendor}=="0fce", ATTR{idProduct}=="6182", MODE="0660", OWNER="<my user name>" in /etc/udev/rules.d/51-android.rules
But for a few minutes I was worried I have to wait until the battery runs out, or worse, use my Windows laptop
My Gnexi said:
Well, I did it!
I dd-restored the fotakernel to what it was before. Then I flashed using the post you linked and indeed I have 2 recoveries.
It seems like booting into recovery is not as easy as in my Galaxy Nexus. You have to tap the volume repeatedly while booting, hoping it will work.
Saying that twrp has a bug is a little understatement. I couldn't get out!
Tried to adb reboot but got "????????????no permissions"
Eventually solved it by putting
SUBSYSTEM=="usb", ATTR{idVendor}=="0fce", ATTR{idProduct}=="6182", MODE="0660", OWNER="<my user name>" in /etc/udev/rules.d/51-android.rules
But for a few minutes I was worried I have to wait until the battery runs out, or worse, use my Windows laptop
Click to expand...
Click to collapse
Me too on my first try of twrp i couldnt get out, i got that locked thing lol
But still i managed by hard reset
Sent from my SGP311 using xda app-developers app
arcsuser said:
hard reset
Click to expand...
Click to collapse
How did you do that?
My Gnexi said:
How did you do that?
Click to expand...
Click to collapse
hold volume up and power for 10-15secs or more or until it reboots
Hey guys. My HTC one has m unlocked boot loader and teamwin recovery installed. And when I trymied to update it won't allow me to. After the download completed I clicked install but then teamwin recovery starts up. I then navigate to downloads and click the update file but it fails. Any help??
Sent from my HTC One using xda app-developers app
farrisizdaman said:
Hey guys. My HTC one has m unlocked boot loader and teamwin recovery installed. And when I trymied to update it won't allow me to. After the download completed I clicked install but then teamwin recovery starts up. I then navigate to downloads and click the update file but it fails. Any help??
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I think you have to have stock recovery if you want to install the OTA update.
Can you pull out the OTA file and upload it?
How would this help my case??
Sent from my HTC One using xda app-developers app
hasoon2000 said:
Can you pull out the OTA file and upload it?
Click to expand...
Click to collapse
Was uploaded here by another user @thomaschila
https://www.dropbox.com/s/2z4t5f0lh....27.531.11_release_337024c11bis4e2ha8yy5i.zip
farrisizdaman said:
How would this help my case??
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
You need to be on the original unrooted ROM and stock recovery. Flash an RUU to go back to stock and then you can update to 4.3
Behold_this said:
Was uploaded here by another user @thomaschila
https://www.dropbox.com/s/2z4t5f0lh....27.531.11_release_337024c11bis4e2ha8yy5i.zip
Click to expand...
Click to collapse
Thank you sir.
So is there no way to update while having a custom recovery?
Sent from my HTC One using xda app-developers app
farrisizdaman said:
So is there no way to update while having a custom recovery?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Not until someone creates a flashable zip
Sent from my SM-N900T
farrisizdaman said:
So is there no way to update while having a custom recovery?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Is there any way to return to stock while away from a computer?
Sent from my HTC One using xda app-developers app
farrisizdaman said:
Is there any way to return to stock while away from a computer?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
No.
Im having problems... my phone was reset to .11 and then i started the install. It was going ok, but stopped. I have a Red Triangle and exclamation mark. The phone will NOT reset though. Tried ADB, Fastboot commands, and holding down power button. Its stuck and wont reset. Any other way to reset it? I HATE not having a removable battery!
gtkansan said:
Im having problems... my phone was reset to .11 and then i started the install. It was going ok, but stopped. I have a Red Triangle and exclamation mark. The phone will NOT reset though. Tried ADB, Fastboot commands, and holding down power button. Its stuck and wont reset. Any other way to reset it? I HATE not having a removable battery!
Click to expand...
Click to collapse
Did you try pressing and holding down the power button and volume down for a while, you should see the home and back button flash a couple of times then keep holding on to them and it should go to recovery.
nyjohn said:
Did you try pressing and holding down the power button and volume down for a while, you should see the home and back button flash a couple of times then keep holding on to them and it should go to recovery.
Click to expand...
Click to collapse
Yep. Both holding down power/vol_down and just power. Each for more than 2minutes. Nothing. The lights flash, but the reboot never happens
gtkansan said:
Yep. Both holding down power/vol_down and just power. Each for more than 2minutes. Nothing. The lights flash, but the reboot never happens
Click to expand...
Click to collapse
Have you tried pressing volume up and power button or volume up a couple of times.
sent from my nexus 7 using xda 4 premium app
phones: htc one running viperone 3.0 viperone stock kernel
nexus 4 running cm10.2 nightlys, galaxy s3 i9300 running ultimaRom 15.0 boeffla 3.0 kernel.
Tablet: nexus 7 stock
gtkansan said:
Yep. Both holding down power/vol_down and just power. Each for more than 2minutes. Nothing. The lights flash, but the reboot never happens
Click to expand...
Click to collapse
Try holding it to a bright light then doing it.
Hello, I have an i717 and I'm having an extremely annoying issue with LiquidSmooth 3.1. So basically, after the first boot/setup, it runs perfectly fine. Beautifully. But if I turn it off, it won't load the OS when I turn it on again. It'll sit on a black screen for several hours. I've tried reinstalling this ROM about 5 times and had the same issue each time.
Anyone having the same issue, or know a fix?
MoronDroid said:
Hello, I have an i717 and I'm having an extremely annoying issue with LiquidSmooth 3.1. So basically, after the first boot/setup, it runs perfectly fine. Beautifully. But if I turn it off, it won't load the OS when I turn it on again. It'll sit on a black screen for several hours. I've tried reinstalling this ROM about 5 times and had the same issue each time.
Anyone having the same issue, or know a fix?
Click to expand...
Click to collapse
Just restarted the phone, booted after the 12th time.
LS goes through the bootanimation twice so it will look like its boot looping. Plus it does seem to take a while to boot into the os, just gotta be patient with the ROM on initial boot.
sent from my sweetened CandyKat SGH-I717
dzee206 said:
LS goes through the bootanimation twice so it will look like its boot looping. Plus it does seem to take a while to boot into the os, just gotta be patient with the ROM on initial boot.
sent from my sweetened CandyKat SGH-I717
Click to expand...
Click to collapse
This is really weird. I formatted all of the partitions, and did a fresh re-install of LiquidSmooth 3.1. It installed just fine, the Polluti0n V2 patch installed fine as well. But when I tried installing the Gapps (pa gapps stock 4.4.4 20140629), it came up with:
"file_getprop: failed to stat "/system/build.prop": No such file or directory.
E: Error in /sdcard/pa_gapps-stock-4.4.4-20140629-signed.zip
(status 7)
Installation aborted."
MoronDroid said:
This is really weird. I formatted all of the partitions, and did a fresh re-install of LiquidSmooth 3.1. It installed just fine, the Polluti0n V2 patch installed fine as well. But when I tried installing the Gapps (pa gapps stock 4.4.4 20140629), it came up with:
"file_getprop: failed to stat "/system/build.prop": No such file or directory.
E: Error in /sdcard/pa_gapps-stock-4.4.4-20140629-signed.zip
(status 7)
Installation aborted."
Click to expand...
Click to collapse
Status 7 is upgrade your recovery, but I have never seen it hit with gapps or just gapps.
Weird
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
captemo said:
Status 7 is upgrade your recovery, but I have never seen it hit with gapps or just gapps.
Weird
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
How do I fix this?
MoronDroid said:
How do I fix this?
Click to expand...
Click to collapse
What recovery are you running?
Have you tried a different gapps package?
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
captemo said:
What recovery are you running?
Have you tried a different gapps package?
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
I have tried 3 different Gapps packages, all had the same result. I don't know what recovery version I am using. But I'm using CWM 5.5.0.4
MoronDroid said:
I have tried 3 different Gapps packages, all had the same result. I don't know what recovery version I am using. But I'm using CWM 5.5.0.4
Click to expand...
Click to collapse
CWM is your recovery and your version#
TWRP is also a recovery used.
Let me ask you how long have you been flashing on this version of recovery and is there an updated version?
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
captemo said:
CWM is your recovery and your version#
TWRP is also a recovery used.
Let me ask you how long have you been flashing on this version of recovery and is there an updated version?
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
I purchased this phone used, and I've had it for 2.5 weeks and have been flashing every couple of days between CM10.1.3 and LS 3.1. I believe there may be an updated version, I'll look around.
MoronDroid said:
I purchased this phone used, and I've had it for 2.5 weeks and have been flashing every couple of days between CM10.1.3 and LS 3.1. I believe there may be an updated version, I'll look around.
Click to expand...
Click to collapse
Oh yeah....if you are flashing CM 10 with it wow. That is quite an older version and LS 3.1 is kit kat. CM 10 is the equivalent of JB so your bouncing back and forth and the up to date recoveries were designed to handle KK.
go to development and find the TWRP thread from "GIMMIEORILLTELL". it is TWRP version 2.8.0.1 ???
TWRP is a touch based recover which is sooooooo simple to use. No more toggle of the volume rocker.
Download and flash like you would any rom.
Once flashed, boot up whatever or pull battery and replace.
Boot back into recovery and it will be there.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
captemo said:
Oh yeah....if you are flashing CM 10 with it wow. That is quite an older version and LS 3.1 is kit kat. CM 10 is the equivalent of JB so your bouncing back and forth and the up to date recoveries were designed to handle KK.
go to development and find the TWRP thread from "GIMMIEORILLTELL". it is TWRP version 2.8.0.1 ???
TWRP is a touch based recover which is sooooooo simple to use. No more toggle of the volume rocker.
Download and flash like you would any rom.
Once flashed, boot up whatever or pull battery and replace.
Boot back into recovery and it will be there.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
I'll surely give it a try, but not at this ungodly hour. I'll be without a phone for the day, but oh well.
captemo said:
Oh yeah....if you are flashing CM 10 with it wow. That is quite an older version and LS 3.1 is kit kat. CM 10 is the equivalent of JB so your bouncing back and forth and the up to date recoveries were designed to handle KK.
go to development and find the TWRP thread from "GIMMIEORILLTELL". it is TWRP version 2.8.0.1 ???
TWRP is a touch based recover which is sooooooo simple to use. No more toggle of the volume rocker.
Download and flash like you would any rom.
Once flashed, boot up whatever or pull battery and replace.
Boot back into recovery and it will be there.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
Flashed... and now it continually boot loops with the Samsung logo flashing. I think it's bricked. This is fantastic...
MoronDroid said:
Flashed... and now it continually boot loops with the Samsung logo flashing. I think it's bricked. This is fantastic...
Click to expand...
Click to collapse
No no no.......deep breath. Relax.
Pull battery.
What were you doing?
And what did you do?
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
captemo said:
No no no.......deep breath. Relax.
Pull battery.
What were you doing?
And what did you do?
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
I selected the Zip using CWM, and told it to flash it. It successfully flashed, replacing the recovery.img. Then I reboot, and it bricked. Keeps flashing the samsung logo, pressing the recovery buttons (volume up+ power) does nothing. There's nothing I can do. It's dead.
MoronDroid said:
I selected the Zip using CWM, and told it to flash it. It successfully flashed, replacing the recovery.img. Then I reboot, and it bricked. Keeps flashing the samsung logo, pressing the recovery buttons (volume up+ power) does nothing. There's nothing I can do. It's dead.
Click to expand...
Click to collapse
Continually powers off and reboots. Vibrates and such.
MoronDroid said:
Continually powers off and reboots. Vibrates and such.
Click to expand...
Click to collapse
PRAISE THE ANDROID MODDING COMMUNITY
http://forum.xda-developers.com/showthread.php?t=1784857
MoronDroid said:
PRAISE THE ANDROID MODDING COMMUNITY
http://forum.xda-developers.com/showthread.php?t=1784857
Click to expand...
Click to collapse
Could be a stuck power button my friend. Flick the back of the phone behind the power button with your finger.
Dont be shy, but done break your finger either.
Very common problem.
Pull battery. Can you get download mode?
Unless you flashed files for the wrong device, I don't think you are bricked.
If you can get download mode, you are not bricked.
What file did you flash?
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
captemo said:
Could be a stuck power button my friend. Flick the back of the phone behind the power button with your finger.
Dont be shy, but done break your finger either.
Very common problem.
Pull battery. Can you get download mode?
Unless you flashed files for the wrong device, I don't think you are bricked.
If you can get download mode, you are not bricked.
What file did you flash?
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
I fixed her. All I did was install Odin, and reinstall the stock ROM (md5 file). Also just rooted it with a new verision of CWM.
I want to thank you for your patience.
MoronDroid said:
I fixed her. All I did was install Odin, and reinstall the stock ROM (md5 file). Also just rooted it with a new verision of CWM.
I want to thank you for your patience.
Click to expand...
Click to collapse
We were getting close to that option. Every once in a while, and I have had to do it recently, we have to return to stock. Basically it takes out all the garbage that has accumulated, even though our process is clean.
I couldn't get anything to flash, not even an alternate recovery. Went back to complete stock, Re root and Bob is your uncle. (that means everything as good as new).
Glad your fixed. Dont let it detour you from flashing. It's a lot of fun. Keeps me off the streets.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app