Related
I am having trouble with my Pc not reading my HTC HD2,when i plug the USB cable in the PC it say's device not supported.
For the last six months i have had no problem i just plug it in and i could read the storsge card in my computer with the rest of the drives ie C: D: E: ect, now it wont read at all i have windows media device centre installed and it wont pick it up either,any ideas. I can bluetooth and charge the phone no problems ,Maybe the usb cable
Thanks
with teh phone connecvted, (after it has said not supported) open up device manager on the pc, find teh entry which will have an exclamation mark, right click it and choose4 uninstal. then try it again.
also worth reinstalling windows mobile device center
Hi Samsamual
When i open windows mobile device center it does nothing even while my phone is connected,it just says phone not connected,i have uninstalled windows mobile device center a couple of times and nothing happins,it seems that when i plug phone and USB cable in the usb port or pc just wont recognise it at all.
Thanks for your reply
harv123456 said:
Hi Samsamual
When i open windows mobile device center it does nothing even while my phone is connected,it just says phone not connected,i have uninstalled windows mobile device center a couple of times and nothing happins,it seems that when i plug phone and USB cable in the usb port or pc just wont recognise it at all.
Thanks for your reply
Click to expand...
Click to collapse
He did not say open device center , he said open "Device Manager", you can open it from computer management in the control panel ...
You did say it said "device unrecognized" that means the pc is "seeing" it , just not seeing it right ...
When in device manager find ,the item that is this "unknown device" if you are not sure which it is, unplug it see what dissapears, and what reappears when you plug it back in, it may just be under usb devices or the similar ..
Then Uninstall that device, then unplug the phone, wait a few seconds and plug it back in ... also plug it right into the computer do not use a usb hub ...
Thanks watcher,i understand now i did not read it right,i will try Device Manager now.
Thanks
harv123456 said:
Thanks watcher,i understand now i did not read it right,i will try Device Manager now.
Thanks
Click to expand...
Click to collapse
Still no luck,below pic's are the messages i am getting when i plug my phone into usb port.
Note my card reader and flash drive work ok on the same usb port,so i assume its my phone or usb cable.
harv123456 said:
Still no luck,below pic's are the messages i am getting when i plug my phone into usb port.
Note my card reader and flash drive work ok on the same usb port,so i assume its my phone or usb cable.
Click to expand...
Click to collapse
i have had several experiences with usb devices malfunctioning and causing that kind of error. and a few of those times i was able to isolate the problem to a faulty cable. but those were generic usb/miniusb cables (ie not supplied with the device... just available loose in the market). if its a cable supplied by the OEM, i doubt it would fail all of a sudden. but try swapping cables and see... good thing hd2 has a standard mini usb interface...
Thanks silenced i will try a different cable tomorrow thanks for your help
harv123456 said:
Still no luck,below pic's are the messages i am getting when i plug my phone into usb port.
Note my card reader and flash drive work ok on the same usb port,so i assume its my phone or usb cable.
Click to expand...
Click to collapse
Did you right click and Uninstall the "Unknown Device" then unplug and re-plug?? ...
Yes i did all that,i got a new USB data cable today and all works fine now.
Thanks guys for all your help,this is a great forum thanks evervbody.
harv123456 said:
Yes i did all that,i got a new USB data cable today and all works fine now.
Thanks guys for all your help,this is a great forum thanks evervbody.
Click to expand...
Click to collapse
Did you solve this problem because I m getting same problem with my cable. Charging but no connection with PC or Notebook. No Memory card reading or syncronize
For some reason, whenever I plug my X10a into my computer, I get "USB Device Not Recognized", and the phone doesn't charge and I can't mount SD Card or use ADB...
It still charges through the wall socket though.
Anyone know what the problem is?
chris_knows said:
Anyone know what the problem is?
Click to expand...
Click to collapse
Your computer or SD. Uninstall any SE drivers with USBDeview and reconnect which should install new drivers and hopefully sort it out.
Thanks for the suggestion, but it didn't work...I tried connecting to another computer too, and nothing happened. So my only option now is to get a new SD card?
Hi, I am experiencing the same thing and this happened after that I first rooted my phone using superoneclick and then replaced my fonts with arabic fonts.
I hope someone can find the root cause for this error.
chris_knows said:
For some reason, whenever I plug my X10a into my computer, I get "USB Device Not Recognized", and the phone doesn't charge and I can't mount SD Card or use ADB...
It still charges through the wall socket though.
Anyone know what the problem is?
Click to expand...
Click to collapse
I've had off and on problems in this area. Searched around and found this thread.
[GUIDE] ADB, Fastboot, and Nandroid for Noobs
This is what he suggests to solve problems with ADB and USB, (below is ALL the work of the Guide author):
"Im not getting a notification of Android ADB when i plug in my USB"
Why: Your computer has detected your phone but as a protable device and as a storage device.
Fix: This took me a lot of research and time to figure out so this is what your are going to do.
First download USBDeview - Here
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Plug in your phone through USB and DO NOT MOUNT IT!!!!!
Your computer should see a new device and try to install Android 1.0 driver (If it doesnt, scroll down to the "Im not getting a notification of Android ADB when i plug in my USB" section)
Let it load
Once it cant find them select "Install drivers from my pc"
The drivers you need are in the Android SDK 1.5r2 folder (C:\android-sdk-windows\usb_driver)
Depending on your OS pick x86 or amd64
You ADB Android Device should now be installed! Good Job
chris_knows said:
Thanks for the suggestion, but it didn't work...I tried connecting to another computer too, and nothing happened. So my only option now is to get a new SD card?
Click to expand...
Click to collapse
Had the same issue my friend. it's the USB socket within the phone that is gubbed. I spent days searching for a solution to no avail.
Why don't you install PC Companion? You can download it from SE. Once you've finished installation, connect your phone and let it detect your phone.
After that, you can uninstall PC Companion. The purpose is to let PC Companion installs all X10 drivers.
Hi guys,
Well it's not the socket because I can charge it normally with wall charger. Regarding the drivers, of course I have tried with PCcompanion and it didn't work.
Thanks...
well i think it can be the socket, becouse, wall charger only uses two wires of the five the socket has, so may be data+ or data- wire is broken. Have you tried with different usb cable?
As the mobile usb socket only has TWO solder points and it is very small socket and the position is not the best, may be some of the five lanes of the socket have unsoldered...and this is why it charges but it cant connect to computer.
It is only an idea..i hope the cause is some driver, mobile configuration (have you tried to reset your phone? ) or the USB cable.
after changing 3 cables I got it to work...
Thank you for your support.
USBDeview is giving me a virus, the .exe is the problem
x10user2011 said:
USBDeview is giving me a virus, the .exe is the problem
Click to expand...
Click to collapse
nvm i downloaded the file from nirosoft.com instead and it works fine.
USB Controllers
Usually if it works on another computer, but not your own, it is because your USB Controllers are messed up. In Device Manager go to Universal Serial Bus Controllers -> right click each one and say Uninstall(your USB mouse/other peripherals will stop working so be warned) -> restart your computer and let it install all the drivers again. Should be working now.
I'm on v2.3 and taking out the battery and SD card and re-inserting it solved the problem for me.
Saz
***
I'm still having this issue. 3 cables 3 computers I think its my port. Charges fine when I plug it into wall or computer.
Just nothing for data its like nothing is happening.
Sent from my X10i using XDA App
Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Same thing happened to me. I just reinstalled making sure all other programs were closed and I haven't had the problem since.
Hope this helps.
Install Kies .
Reboot phone
Start Kies
Connect Let KIES find phone .
Turn KIES off from taskbar .
Turn USB debugging on phone connect USB mass storage mode and let windows find driver .
That do work try all the other posts same subject for an alternative .
jje
No go
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
cablesguy said:
Tried all of the above, still no go, could it be my micro usb port on the phone is busted? When i tried connecting as Mass storage it says usb cable is connected, pls remove cable.
Click to expand...
Click to collapse
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
JJEgan said:
No thats just incorrect user settings .
Remove cable go to settings Applications Turn on USB debugging .
And?or turn usb mass storage mode on via settings Wireless and network USB settings then connect cable .
jje
Click to expand...
Click to collapse
Yup, I did. I removed cables and turned on USB debugging, and tried the mass storage mode, upon connecting it says cable connected and to remove.
I'm getting this problem once I'm in Download mode. It's worked before... why would it stop?
Any tips?
I have the same problem
I seem to have the same problem I connect my phone via USB and get a USB Device Not Recognized message but MTP application opens on the phone. This has only just happened I have had it working before since I had the phone on 2 computers and have tried to different cables now it does not work on either computer. If any one has had any luck I would love to know how you fixed it.
Samsung Galaxy S2 - USB Device not recognized.
Hey Guys,
I have the same problem. I've even tried going into "Recovery" Mode and then running odin.. Still no luck. It just does not recognize the phone.
I tried a different cable but still no luck.
Guys,
i had had the same problem until i started to use the original USB cable(came with the phone).
Have a good luck!
Kirby
Got the same usb problem, different pc's, driver, cables nothing works.
After three month of use no Kies Odin ore mass storage us....big problem
any news info on this? seems to be quite common, though I only get it with stock roms, custom roms dont seem to have this issue
Cables Guy; I'm trying to figure out if I'm having the same problem as you. Does your phone charge when plugged in? Because mine does not.
i think in your case it might be the usb port in the phone itself, if nothing that you plug works well.
I believe there is an issue with kies/MTP and windows drivers for the rest though.
For me my phone doesnt get detected o nmy onboard USB but it does on the usb3 pccard i have.
any good news to solve this problems?
i got the same problem and worst case is my phone cannot detect sim
I had the same problem.. I just switched back to the original cable that came with the phone & problem was solved..
Sent from my SGH-T989D using XDA App
cablesguy said:
Cant connect to Kies as it says USB device not recognized, used to but not anymore, dont see this problem in the S2 thread, anyone?
Currently using Win7 64
Thx
Click to expand...
Click to collapse
whats your phone kernel? and are u able to connect to pc as usb storage? or did u flash anything weird before?
Hello everybody,
I know there are thousands of threads like this, but none of them gives me a solution. If I try to connect my SG2 (Stock ROM) with an USB cable, I get a really annoying message all the time. (Screenshot: http://www.techiesguide.com/wp-content/uploads/2011/10/USB-device-not-recognized-1.gif) It's still charging. When I try to install the drivers, I get an error message too. It tries to install drivers through Windows Updates, which doesn't work. Maybe Samsung's old drivers will work... Does someone have them?
My USB port just work. I can use everything else with it. The cable also works, and I've tried several cables. USB Debugging is enabled on my phone.
Things I already tried:
-Install drivers through download mode
-Cleaning up the USB port
-Different USB ports and cables
-Reinstalling drivers/Samsung Kies
-Removing the battery
-Install drivers w/o SIM and SD card
-Manually install drivers
-Soft factory reset
-Samsung Kies' troubleshooting
-USB Mass Storage
I hope somebody knows a solution for this.
Thanks in advance,
DroidHackz
DroidHackz said:
Hello everybody,
I know there are thousands of threads like this, but none of them gives me a solution. If I try to connect my SG2 (Stock ROM) with an USB cable, I get a really annoying message all the time. (Screenshot: http://www.techiesguide.com/wp-content/uploads/2011/10/USB-device-not-recognized-1.gif) It's still charging. When I try to install the drivers, I get an error message too. It tries to install drivers through Windows Updates, which doesn't work. Maybe Samsung's old drivers will work... Does someone have them?
My USB port just work. I can use everything else with it. The cable also works, and I've tried several cables. USB Debugging is enabled on my phone.
Things I already tried:
-Install drivers through download mode
-Cleaning up the USB port
-Different USB ports and cables
-Reinstalling drivers/Samsung Kies
-Removing the battery
-Install drivers w/o SIM and SD card
-Manually install drivers
-Soft factory reset
-Samsung Kies' troubleshooting
-USB Mass Storage
I hope somebody knows a solution for this.
Thanks in advance,
DroidHackz
Click to expand...
Click to collapse
Same problem for me, I think my Micro USB Port is broken (I'm pretty sure). Just replace it for ~10$ and you'll be fine
sadekmefti said:
Same problem for me, I think my Micro USB Port is broken (I'm pretty sure). Just replace it for ~10$ and you'll be fine
Click to expand...
Click to collapse
Okay, I'll use another device, and if that one works I can confirm you're right and find a solution for it.
EDIT: You're right. Where can I get one?
Help need ASAP...
Yes..i also facing the same problem. I'm using Sentinel Rom with siyah kernel, my phone is not booting up it..shows a battery charging icon that's charging. i have tried all the possibilities that mentioned above , but no use..its says usb not recognized and also not able to go to Recovery mode or Download Mode using the hardware keys..but USB jig works , i was able to go to download mode but PC doesn't detect it odin. So not able to flash the kernel\ROM...
The phone was working till last moment , but when i restarted this problem came.
Can anyone suggest a solution..?
Post above mine; 'Odin won't work' gets covered here all the time. Search.
Solved
Saravanashines said:
Yes..i also facing the same problem. I'm using Sentinel Rom with siyah kernel, my phone is not booting up it..shows a battery charging icon that's charging. i have tried all the possibilities that mentioned above , but no use..its says usb not recognized and also not able to go to Recovery mode or Download Mode using the hardware keys..but USB jig works , i was able to go to download mode but PC doesn't detect it odin. So not able to flash the kernel\ROM...
The phone was working till last moment , but when i restarted this problem came.
Can anyone suggest a solution..?
Click to expand...
Click to collapse
SOLVED :
Ok..i found whats the problem..the problem with my micro usb port ,which was not detecting. I connected my phone with different USB in my home PC and it detected , i went to Download mode using USB jig and flashed with new rom and its fixed. Thanks for the Help. I still have problem in my phone , if i connect my phone to any pc, phone gets rebooted. Hope i will find a solution for it.
:victory:
hi everyone
well like the tittle say.my problems is with a verizon variant i just got.for some reason the phone wont connect to pc
installed drivers and still nothing the phone charges fine when connected but the computer wont even see it,i try 3 different computers and nothing move the usb cable a little to see i f theres any sort of sign of connection but nothing..
i think maybe is a hardware issue but just want to try everything before giving up.
also cant install tot because the phone wont connect to pc
Hi, are you using the original USB cable? After you connect the phone to the PC, have you given the PC up to 10 minutes to load the driver that you had previously installed? Depending on various factors it can take 5-10 minutes, and it has to do it all over again for every new/different USB port you try. After 5-10 minutes when you're trying it in Download mode, see what Windows' Device Manager says in the Modem and Port sections. If it lists "LGE..." device then it sees it.
For flashing from a PC, use a USB 2.0 port that comes directly from the PC's motherboard - not a USB 3.x port, and not through a USB hub.
Try rebooting the phone and the PC while they're not connected to each other.
roirraW "edor" ehT said:
Hi, are you using the original USB cable? After you connect the phone to the PC, have you given the PC up to 10 minutes to load the driver that you had previously installed? Depending on various factors it can take 5-10 minutes, and it has to do it all over again for every new/different USB port you try. After 5-10 minutes when you're trying it in Download mode, see what Windows' Device Manager says in the Modem and Port sections. If it lists "LGE..." device then it sees it.
For flashing from a PC, use a USB 2.0 port that comes directly from the PC's motherboard - not a USB 3.x port, and not through a USB hub.
Try rebooting the phone and the PC while they're not connected to each other.
Click to expand...
Click to collapse
i try all the options that you advise but none works i used 5 different cables one original and the other 4 are samsung original not Chinese clones
i have no idea what to do next
brigantti said:
i try all the options that you advise but none works i used 5 different cables one original and the other 4 are samsung original not Chinese clones
i have no idea what to do next
Click to expand...
Click to collapse
The only other option is to try a different PC.
i did that on 3 pc the same.
the phone works i got recovery and can flash roms but i have to download everything on the phone it self.i wanted to fix it so i can restore tot and start fresh.im about to give up on the issue
brigantti said:
i did that on 3 pc the same.
the phone works i got recovery and can flash roms but i have to download everything on the phone it self.i wanted to fix it so i can restore tot and start fresh.im about to give up on the issue
Click to expand...
Click to collapse
Are you on CM? If so, try going into developer options, there is a usb option in there to take it off charge and put it on MTP
cory733 said:
Are you on CM? If so, try going into developer options, there is a usb option in there to take it off charge and put it on MTP
Click to expand...
Click to collapse
thanks for your response,well im on cloudy rom is stock