My GT-S5830i is a rooted device.
Firmware Revision:
PDA: LK3 / PHONE: LK1 / CSC:LK1 (got info from Kies when phone was connected)
Internal Phone Storage : 105mb (now down to 52mb because of problem below)
SD Card 16gb and partitioned.
New Firmware Revision:
PDA: MC1 / PHONE: MB2 / CSC: MC1 (got info from Kies when phone was connected)
On the 3rd April 2013 got notification from Samsung regarding a firmware update so I unrooted the phone then continued to update through my WiFi the software downloaded ok but when phone tried to install it halted at 22% and notification saying "could not continue to try again or use Kies" I noticed my phone internal storge was now down to 52mb
I tried updating firmware using Kies via USB but it failed with notification "unknown error"
Had a look for this firmware update on Sammobile but this new firmware was not found.
I have now rerooted my phone and it is still working ok except for the massive loss of internal storage
Has any member had the same problem ??
Is there any way I can reclaim the lost internal storage ??
Note / I have updated my firmware before from Samsung using WiFi with phone unrooted then on completion rooted with no problems.
Can any member help with this one ??
soundacer said:
My GT-S5830i is a rooted device.
Firmware Revision:
PDA: LK3 / PHONE: LK1 / CSC:LK1 (got info from Kies when phone was connected)
Internal Phone Storage : 105mb (now down to 52mb because of problem below)
SD Card 16gb and partitioned.
New Firmware Revision:
PDA: MC1 / PHONE: MB2 / CSC: MC1 (got info from Kies when phone was connected)
On the 3rd April 2013 got notification from Samsung regarding a firmware update so I unrooted the phone then continued to update through my WiFi the software downloaded ok but when phone tried to install it halted at 22% and notification saying "could not continue to try again or use Kies" I noticed my phone internal storge was now down to 52mb
I tried updating firmware using Kies via USB but it failed with notification "unknown error"
Had a look for this firmware update on Sammobile but this new firmware was not found.
I have now rerooted my phone and it is still working ok except for the massive loss of internal storage
Has any member had the same problem ??
Is there any way I can reclaim the lost internal storage ??
Note / I have updated my firmware before from Samsung using WiFi with phone unrooted then on completion rooted with no problems.
Can any member help with this one ??
Click to expand...
Click to collapse
why use kies for updating ??
download latest firmware for uk from samfirmware and flash it via odin...
and for getting internal storage back look at this thread
http://forum.xda-developers.com/showthread.php?t=2260761
that user has same problem...
Sent from my GT-S5830i using xda app-developers app
srt99 said:
why use kies for updating ??
download latest firmware for uk from samfirmware and flash it via odin...
and for getting internal storage back look at this thread
http://forum.xda-developers.com/showthread.php?t=2260761
that user has same problem...
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Thanks for info srt99
Will have a good look at link you provided to sort out storage, sorry ment to say in my last post I looked on samfirmware and this new firmware update was not there, I am going on holiday t'morrow so will have a look again when I get back.
I will post results on how things go later.
srt99 said:
why use kies for updating ??
download latest firmware for uk from samfirmware and flash it via odin...
and for getting internal storage back look at this thread
http://forum.xda-developers.com/showthread.php?t=2260761
that user has same problem...
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Back again.
I had a look at link from Crackdaddy, I have done the same as he has cleaned all caches but still 50mb (app) has been lost due to update.
But CrackDaddy makes a good point, where do these firmware updates reside, I have looked for this failed update using Link2sd and Titanium and just can't see it, surely it should be seen some where.
At a loss with this one.
Dude just flash a stock or custom ROM via Odin, it'll solve your problem and like Android-fany replied to CrackDaddy's thread; there isn't a single file but multiple files that are left behind after the failed update.
Sent from my GT-S5830i using xda app-developers app
Ok so I am in the exactly the same boat; rooted my GT-S5830i on stock rom and stupidly yesterday I downloaded a 30.14mb update which failed after installing 25% of it and now my internal memory is 30mb less!!! =( (if only I had known before hand you can't update a rooted phone!!)
Researching told me that OTA updates where stored in the cache so I tried wiping the cache in recovery and no joy. Using my ES File Explorer app the following folders show...
/data/cache/ is empty!
/cache/lost+found/ is empty!
/cache/recovery/ has a file called "last_log" which is only 7.23KB not 30mb! =(
So it would seem the failed update installed and as said above is in the system folders, so I guess unless I was told every single file/folder name and went and deleted them all all,. the only other way to get back the 30mb of internal memory would be to flash my phone back to the stock rom correct?
I really didn't want to muck about with flashing, I'm a total noob and tbh it scares me in case I muck it up and also then there is warranty issues, doesn't flashing make the bootload value increase each time, thus voiding your warranty if the value is not at the stock value of 0?! I decided to root my phone with the understanding that if I did need to do a warranty claim I could reload the bloatware apps, factory reset the phone and then unroot it thus putting it back to stock mode and more importantly the bootload value will remain the same as the phone has not been flashed!
So I am put off tbh if the only way for me to get my 30mb of internal space back is to flash it with the stock rom! =(
Does anyone know where the 30mb of files are and what they are called? Maybe it is just one file and not a lot because I understand now that when you do an OTA update it downloads the update but before installing checks the system's files and folders to check every is 100% stock and that the stock apps are there before installing the update. Well surely because this check failed on my phone then it didn't install the update and with any luck the 30mb download is still in one file?!
lol sorry to go on, this has really annoyed me, especially the fact that since it has happened yesterday I have literally spent about 7 hours on and off researching this on the net etc! =(
Thanks for your help,
James =)
lcrjames said:
Ok so I am in the exactly the same boat; rooted my GT-S5830i on stock rom and stupidly yesterday I downloaded a 30.14mb update which failed after installing 25% of it and now my internal memory is 30mb less!!! =( (if only I had known before hand you can't update a rooted phone!!)
Researching told me that OTA updates where stored in the cache so I tried wiping the cache in recovery and no joy. Using my ES File Explorer app the following folders show...
/data/cache/ is empty!
/cache/lost+found/ is empty!
/cache/recovery/ has a file called "last_log" which is only 7.23KB not 30mb! =(
So it would seem the failed update installed and as said above is in the system folders, so I guess unless I was told every single file/folder name and went and deleted them all all,. the only other way to get back the 30mb of internal memory would be to flash my phone back to the stock rom correct?
I really didn't want to muck about with flashing, I'm a total noob and tbh it scares me in case I muck it up and also then there is warranty issues, doesn't flashing make the bootload value increase each time, thus voiding your warranty if the value is not at the stock value of 0?! I decided to root my phone with the understanding that if I did need to do a warranty claim I could reload the bloatware apps, factory reset the phone and then unroot it thus putting it back to stock mode and more importantly the bootload value will remain the same as the phone has not been flashed!
So I am put off tbh if the only way for me to get my 30mb of internal space back is to flash it with the stock rom! =(
Does anyone know where the 30mb of files are and what they are called? Maybe it is just one file and not a lot because I understand now that when you do an OTA update it downloads the update but before installing checks the system's files and folders to check every is 100% stock and that the stock apps are there before installing the update. Well surely because this check failed on my phone then it didn't install the update and with any luck the 30mb download is still in one file?!
lol sorry to go on, this has really annoyed me, especially the fact that since it has happened yesterday I have literally spent about 7 hours on and off researching this on the net etc! =(
Thanks for your help,
James =)
Click to expand...
Click to collapse
I replied to this post in my thread here: (http://forum.xda-developers.com/showthread.php?p=41169984#post41169984) how many threads have you posted this in?
Ive just encountered the update, would unrooting, updatding and rerooting work without loosing my stuff?
sorry
chrisakak9 said:
Ive just encountered the update, would unrooting, updatding and rerooting work without loosing my stuff?
Click to expand...
Click to collapse
Sorry to all nembers I started this thread then realised there was a similar thread started : http://forum.xda-developers.com/showthread.php?p=41169984#post41169984 and got cought up in that one and did not come backe here, anyway got problem fixed so if any one needs info on this FW update problem go to above link
soundacer said:
My GT-S5830i is a rooted device.
Firmware Revision:
PDA: LK3 / PHONE: LK1 / CSC:LK1 (got info from Kies when phone was connected)
Internal Phone Storage : 105mb (now down to 52mb because of problem below)
SD Card 16gb and partitioned.
New Firmware Revision:
PDA: MC1 / PHONE: MB2 / CSC: MC1 (got info from Kies when phone was connected)
On the 3rd April 2013 got notification from Samsung regarding a firmware update so I unrooted the phone then continued to update through my WiFi the software downloaded ok but when phone tried to install it halted at 22% and notification saying "could not continue to try again or use Kies" I noticed my phone internal storge was now down to 52mb
I tried updating firmware using Kies via USB but it failed with notification "unknown error"
Had a look for this firmware update on Sammobile but this new firmware was not found.
I have now rerooted my phone and it is still working ok except for the massive loss of internal storage
Has any member had the same problem ??
Is there any way I can reclaim the lost internal storage ??
Note / I have updated my firmware before from Samsung using WiFi with phone unrooted then on completion rooted with no problems.
Can any member help with this one ??
Click to expand...
Click to collapse
I got the exact same problem with the 30.14MB update...
believe it or not I found a way to get rid of the unwanted update files.
i will tell you what I did:
1. I cleared the data of the app 'system update' and this other 'update' system app
2. went into recovery mode cleared my cache partition and did a factory data reset
3. used CWM recovery and cleared my dalvik cache
That seemed to get rid of the update files hope it helps you as well
Sent from my Nexus 7 using xda app-developers app
Related
Hello Everyone,
I badly need help on my Huawei Honor U8860 phone. I have recently updated it from 2.3.6 to 4.03 over WIFI and the update went smoothly. So now here is what my phone have:
Kernel Version: 3.0.8-perf-00059-g3a757a2 [email protected] #1
Build Number: U8860IV100R001C00B923SP01
I have not rooted the phone at this time. It was working fine until 2 days ago when I started getting messages on the screen like:
"Unfortunately, 2D Home has stopped"
"Unfortunately, Google Play has stopped"
"Unfortunately, Contacts has stopped"
"Unfortunately, Settings has stopped"
"Unfortunately, Google Play Music has stopped"
"Unfortunately, Browser has stopped"
And so on, and so forth. It seems that all apps and processes have stopped when I try to use them so I literally can't use the phone. I went through several threads here just trying to restore my phone back to a
working state. I tried to do the following in order but without success:
1.) Factory data reset / erase everything - the phone boots to the recovery menu then it formats the /Data, /Cache and /HWUserData then it reboots. After reboot, the phone is back to where it was before the factory data reset with everything in it including downloaded apps.
2.) Manually uninstalled all downloaded apps. Removed screen lock (just to see if phone behavior changes). Then rebooted the phone but after reboot, all the apps are still installed and the screen lock is back as well.
3.) I tried to Force Update with the following official ROMs: B886, B919 and B923 but I always get the message "Update failed" during the update process.
4.) I downloaded the file "recovery-u8860-en.img" so I can replace the "recovery.img" file . Rebooted the phone w/ the pink screen and connected it to my PC but there is no USB mass storage device mounted.
5.) Finally, I tried to root the phone. I enabled USB debugging. I installed the ADB drivers then I downloaded the U8860 root tools and rootexplorer.apk. When I ran the "root-me.cmd", it tried to copy some files to the phone but it failed. The error was "read-only file system".
So it seems that the problem is because of the "read-only filesystem". I does not permit/allow any changes made to the phone. Can you help me restore my phone?
Please.. Can somebody help me on this?
Thanks, clint2rose
clint2rose said:
Please.. Can somebody help me on this?
Thanks, clint2rose
Click to expand...
Click to collapse
I still did not find any solution for my problem. I read from this thread that all ICS versions can be downgraded.
http://forum.xda-developers.com/showthread.php?t=1552038&page=232
Is there a way to downgrade from B923 to B919? I think this will solve the problem I'm facing.
clint2rose said:
I still did not find any solution for my problem. I read from this thread that all ICS versions can be downgraded.
http://forum.xda-developers.com/showthread.php?t=1552038&page=232
Is there a way to downgrade from B923 to B919? I think this will solve the problem I'm facing.
Click to expand...
Click to collapse
try to back-up some of the data form the partitions that are full on your phone and delete them, maybe afterwards the stock-rom-flashing procedure will work again.
kaefert said:
try to back-up some of the data form the partitions that are full on your phone and delete them, maybe afterwards the stock-rom-flashing procedure will work again.
Click to expand...
Click to collapse
thanks for the reply. it did not work. I even formatted the internal SD. Re-run the firmware update but it failed. when i boot the phone, all the contents of the internal SD remains intact. any other suggestion?
I can remember there was some talk of "downgrade patches" to flash before official ROMs if downgrades failed
http://forum.xda-developers.com/showpost.php?p=36819830&postcount=2312
http://forum.xda-developers.com/showpost.php?p=36117718&postcount=2228
http://forum.xda-developers.com/showpost.php?p=35376103&postcount=2104
http://forum.xda-developers.com/showpost.php?p=34105274&postcount=1865
http://forum.xda-developers.com/showthread.php?p=32996711&highlight=patch#post32996711
working download linka (just tested them) -->
https://docs.google.com/file/d/0B4MkDBK_iI-gWEoyaWpEekRXT00/edit
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg=
kaefert said:
I can remember there was some talk of "downgrade patches" to flash before official ROMs if downgrades failed
http://forum.xda-developers.com/showpost.php?p=36819830&postcount=2312
http://forum.xda-developers.com/showpost.php?p=36117718&postcount=2228
http://forum.xda-developers.com/showpost.php?p=35376103&postcount=2104
http://forum.xda-developers.com/showpost.php?p=34105274&postcount=1865
http://forum.xda-developers.com/showthread.php?p=32996711&highlight=patch#post32996711
working download linka (just tested them) -->
https://docs.google.com/file/d/0B4MkDBK_iI-gWEoyaWpEekRXT00/edit
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg=
Click to expand...
Click to collapse
I downloaded the files from both links. Can you tell me how to flash my current ROM? Because when I tried to use the file like a regular ROM (I created dload folder then put UPDATE.APP in the folder, then ran firmware update.. the update failed)..
clint2rose said:
I downloaded the files from both links. Can you tell me how to flash my current ROM? Because when I tried to use the file like a regular ROM (I created dload folder then put UPDATE.APP in the folder, then ran firmware update.. the update failed)..
Click to expand...
Click to collapse
what do you mean by flashing your current ROM? Just like any other stock ROM put the dload folder on the sd-card and start the update procedure either from the settings menu or via the boot-key-combination.
Yes the way you discribed is the correct one for flashing those patches, If those patches also don't work, I'm out of ideas, sorry.
kaefert said:
what do you mean by flashing your current ROM? Just like any other stock ROM put the dload folder on the sd-card and start the update procedure either from the settings menu or via the boot-key-combination.
Yes the way you discribed is the correct one for flashing those patches, If those patches also don't work, I'm out of ideas, sorry.
Click to expand...
Click to collapse
Thank you once more for your time. Most of the thread I read regarding these patches often used the phrase" you have to flash the current version of your ROM using the patch"...
And yes I created dload folder, place the UPDATE.APP and put it on the sdcard. I turned off the phone and removed the battery. Then I pressed vol+ vol- and power on/off button. The firmware update went to about 70% installing before displaying update failed.
I guess I will have to bring my phone to a repair center. My only problem is that there is no Huawei service center at my place (I reside here in Saudi Arabia). I got the phone as a free device on a broadband package and the warranty is already expired. I'm a little worried to take the phone to the small mobile repair shops as they might screw up the phone even more. Huawei is not a popular device here unlike iPhone, HTC and Samsung Galaxy.
As I understood that your device is rooted, you should get some custom ROM and try to install it.
okty2k said:
As I understood that your device is rooted, you should get some custom ROM and try to install it.
Click to expand...
Click to collapse
No, my device is not rooted. I tried to root it but I get the message "failed to copy file: Read-only file system".
clint2rose said:
No, my device is not rooted. I tried to root it but I get the message "failed to copy file: Read-only file system".
Click to expand...
Click to collapse
you don't need to be rooted, you only need to have a custom recovery deployed (which you can either do with root permissions, or by using the pink screen method, but some newer stock roms (you said your on 932 or something? last non-locked working is b919) this has been locked and the device will not boot if the kernel or the recovery image has been manipulated.
I think you will have to find some (huawei-certified!) repair-center, small do-it-all phone-shops probably won't be able to take care of this problem for you.. I'm sorry but I don't see any other solution
kaefert said:
you don't need to be rooted, you only need to have a custom recovery deployed (which you can either do with root permissions, or by using the pink screen method, but some newer stock roms (you said your on 932 or something? last non-locked working is b919) this has been locked and the device will not boot if the kernel or the recovery image has been manipulated.
I think you will have to find some (huawei-certified!) repair-center, small do-it-all phone-shops probably won't be able to take care of this problem for you.. I'm sorry but I don't see any other solution
Click to expand...
Click to collapse
Ok. I will try to find a repair-center experienced in Huawei devices. I have one last question if you don't mind. Is it possible to erase everything on the phone? As in completely erase or reformat after which there will not be an operating system on the phone. I read in some threads that this is possible w/ custom recovery but I want to know if it is also possible for phones without the custom recovery. I'm hoping there might be some tool or something..
U8860 not responding
clint2rose said:
Ok. I will try to find a repair-center experienced in Huawei devices. I have one last question if you don't mind. Is it possible to erase everything on the phone? As in completely erase or reformat after which there will not be an operating system on the phone. I read in some threads that this is possible w/ custom recovery but I want to know if it is also possible for phones without the custom recovery. I'm hoping there might be some tool or something..
Click to expand...
Click to collapse
Have you find the solution yet? I have the same problem. Somehow my phone system is "locked". I can't install or uninstall app. Some google apps keep showing not responding. Everything changes i made, keep showing up after the phone rebooted.
This was happen a few days after I upgrade to ICS B932SP01 and rooted my phone (to remove original chinese apps).
Luckily i have friend in huawei indonesia. He gave my u8860 to the technical support. But the result was no good.
They try everything, even install my phone with the original GB and always failed.
The last suggestion is change the phone machine, which is as same as buy a new phone.
I really appreciate is someone can help me here...
Thanks
Hey all,
Had my S3 for about 10months.
HANDSET DETAILS:
* Unlocked GT-i9300 (running GiffGaff sim)
* 16GB White, running Stock Touch-Wizzed ICS 4.0.4
* Baseband: I9300BVLE4
* Kernel Ver: 3.0.15-554502-user
[email protected]#1
SMP PREEMPT Sun May 13 11:40:33 KST 2012
* Build Number: IMM76D.I9300BVALE4
WHAT I'M TRYING TO DO:
I am not trying to root this phone (YET!), I am just trying to use Kies to upgrade to JB.
All the 'legal information' in the Settings menu is 'greyed out'. I cannot select, or update OTA.
I will probably get to the CM / custom ROMs sometime but for now I just thought I'd do a simple (I thought) easy upgrade to JB.
Kies recognises the phone, suggests I do a back-up (which I did), and then attempts to download a 3000mb install package. At this point, it throws up a dialog box showing a bunch of 'square characters' - the kind of thing you see if you don't have a language installed on your OS. (which is XP by the way).
It's an error for sure, as after closing it (OK is the only option), the download process loops as it asks me again 'do I want to backup before upgrade'. So I'm getting nowhere.
I'm not sure why Kies has such a problem with my phone.
If it's any use, I can say that this was bought brand-new, unlocked, from a retailer website, though upon boot it displays an Orange logo, and certain parts of the menus (although very few) were in French by default. I've registered the phone with Samsung on their site successfully so that's fine. I put in a QUERY for them to help but it's been over a month and nothing back so far.
So I thought I would come to the expert village and see if I can get some help.
-I'm hoping it's okay to ask about Official updating here and not completely boring ( ! ) as I'm aware this is a land of great rootery and customisation! which I think is great by the way :good:
Thanks to anyone that can help!
regards,
SkEvol (newbie)
Have a look in the stickies about how to use ODIN (its not difficult to use).
Then, I would advise you flash the latest official Samsung firmware from here - http://forum.xda-developers.com/showthread.php?t=1646610
Ensure you follow the ODIN instructions properly and make sure Kies isn't running when you use ODIN.
This will get you onto the latest version of JB to be released by Samsung...
mikep99 said:
Have a look in the stickies about how to use ODIN (its not difficult to use).
Then, I would advise you flash the latest official Samsung firmware from here - http://forum.xda-developers.com/showthread.php?t=1646610
Ensure you follow the ODIN instructions properly and make sure Kies isn't running when you use ODIN.
This will get you onto the latest version of JB to be released by Samsung...
Click to expand...
Click to collapse
Hi there Mike,
Thanks for the reply, while I'm quite happy to use some ODIN to do this (I don't mind a learning curve), I'm just a bit put off by the disclaimer "Using ODIN can change your bootloader to show that the system is MODIFIED and may increase your ODIN flash count. This may void your Warrenty".
-my phone is still under warranty and I would rather avoid breaking the warranty if at all possible.
Are there any other options?
SkEvol said:
Hi there Mike,
Thanks for the reply, while I'm quite happy to use some ODIN to do this (I don't mind a learning curve), I'm just a bit put off by the disclaimer "Using ODIN can change your bootloader to show that the system is MODIFIED and may increase your ODIN flash count. This may void your Warrenty".
-my phone is still under warranty and I would rather avoid breaking the warranty if at all possible.
Are there any other options?
Click to expand...
Click to collapse
I wouldn't worry about that tbh.
As your phone hasn't been rooted it shouldn't be an issue.
Also, there are ways to change the system flag back to 'official' using Triangle Away but I don't think you'll need to.
Sent from my GT-I9300 using xda app-developers app
mikep99 said:
I wouldn't worry about that tbh.
As your phone hasn't been rooted it shouldn't be an issue.
Also, there are ways to change the system flag back to 'official' using Triangle Away but I don't think you'll need to.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks again Mike,
I'm going to use ODIN to update to Samsung's official I9300XXEMD2_I9300OXXEMD1_I9300XXEMC2_XEO.zip ROM.
I'm already using the Stock ICS which came with the phone (brand new, but unlocked). So essentially I'll just be updating to a new version of an official ROM from Samsung.
I have already taken steps using KIES, to backup the call logs, SMS's, contacts, and APPS.
These are all items which are stored on the internal 16GB (I believe) please correct me if I'm wrong?
I would like to ask:
1) Will this ODIN flashing process effect any data on my external SD card? (I obviously don't want to lose any of it)
2) And, will I be able to use KIES afterwards, to return all my old data (ie app settings, the APPS themselves, call logs, SMS's, contacts etc) to the phone's 16GB memory?
Hopefully simple questions :fingers-crossed:
Thanks again.
The ODIN process doesn't wipe your phone as far as I can remember so everything should still be there (downloaded apps, SMS, call log etc).
Hopefully someone else can clarify this who has used it recently...
Sent from my GT-I9300 using xda app-developers app
mikep99 said:
The ODIN process doesn't wipe your phone as far as I can remember so everything should still be there (downloaded apps, SMS, call log etc).
Hopefully someone else can clarify this who has used it recently...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for heading me in Odin's direction
I haven't gotten round to doing the update yet.. and considering just hanging on until samsung release their official 'non-leaked' JB s3 update.
I'm still in the dark as to why my update options / legal information are greyed out though..
Does anyone know why?
I'm still in the dark as to why my update options / legal information are greyed out though..
Does anyone know why?
usual reason is a mismatch in the phone codes shown to KIES .
Orange logo means its an Orange phone and based upon the OP i would suggest that its an Orange France phone originally . It may have had firmware modifications or been a return phone or even a grey import .That would explain wrong codes no update path .
jje
'Mismatch in phone codes shown to Kies'
Are you saying Kies is expecting a certain code from the phone?
(Presumably derived from its serial number or something) - I don't know what a 'phone code' is.
I never had a doubt this phone has been messed with.
Presumably then.. the warranty might have been void (technically) since the day I bought it.
Since the firmware has been messed with?
If you have a mismatch in the Phone and CSC Kies will tell you that you can't update when you connect it as its trying to update that wont be the problem.
Your baseband and build are defiantly Orange so you need to flash the latest Orange France version to keep warranty but would guess that if it doesn't have Orange bloatware on it then at some point its been rooted and the bloatware wiped, in which case you want have a warranty
The latest France Orange firmware is phone I9300XELLA csc I9300FTMELL1 from sammobile site but if you want non branded then you need Open Europe OXA or UK & Europe BTU, the one you mention XEO is Poland although it will work for you its not really the one you want but the choice is yours.
You don't need a rooted phone to use Odin but any update will increase your flash count you can zero this by using triangle away from XDA if you want.
EDIT :- Just noticed in your first post the version is from May 2012 that you currently have so is this phone previously used.
Hello Everyone,
Android OS downloaded an update file of Jelly Bean which I did not want to install but it kept coming back after pushing it forward.
Today, by mistake, I accidently pressed the Install button and the phone is now stuck at boot up screen.
I am (was) on ICS.
I tried connecting the phone with Samsung KIES, but the phone status shows as "Connecting"
I have downloaded ODIN and I would like to go to any rooted firmware (preferred). But I am not sure if I can root from this situation. I may have to recover to boot properly and then root, as I do not want to lose any data.
However, I have never done it and I get confused on which firmware to download for my phone based out of India.
The details I could fetch under the phone battery are :
-------------
Model : GT-I9100G
SSN : -I9100GGSMH
FCC ID : A3LGTI9100G
-------------
Can anyone direct me to the file URLs to download to recover from this position ?
Any thread giving a detailed procedure will be appreciated. I would not like to wipe the existing data over the phone, hence I have not tried the factory reset.
I have gone through :
http://forum.xda-developers.com/showthread.php?t=2345831&highlight=odin+won+t+flash
http://forum.xda-developers.com/showthread.php?t=1671969 >> Will this ODIN version work on my S2 model ?
Also, I do have an external SD card, if possible, can I load any rooted / normal firmware through it ?
Thanks a lot for all your help !!!
Regards,
Sam
187final said:
Hello Everyone,
Android OS downloaded an update file of Jelly Bean which I did not want to install but it kept coming back after pushing it forward.
Today, by mistake, I accidently pressed the Install button and the phone is now stuck at boot up screen.
I am (was) on ICS.
I tried connecting the phone with Samsung KIES, but the phone status shows as "Connecting"
I have downloaded ODIN and I would like to go to any rooted firmware (preferred). But I am not sure if I can root from this situation. I may have to recover to boot properly and then root, as I do not want to lose any data.
However, I have never done it and I get confused on which firmware to download for my phone based out of India.
The details I could fetch under the phone battery are :
-------------
Model : GT-I9100G
SSN : -I9100GGSMH
FCC ID : A3LGTI9100G
-------------
Can anyone direct me to the file URLs to download to recover from this position ?
Any thread giving a detailed procedure will be appreciated. I would not like to wipe the existing data over the phone, hence I have not tried the factory reset.
I have gone through :
http://forum.xda-developers.com/showthread.php?t=2345831&highlight=odin+won+t+flash
http://forum.xda-developers.com/showthread.php?t=1671969 >> Will this ODIN version work on my S2 model ?
Also, I do have an external SD card, if possible, can I load any rooted / normal firmware through it ?
Thanks a lot for all your help !!!
Regards,
Sam
Click to expand...
Click to collapse
I was able to flash with Jelly Bean from the sammobile.com and now the phone looks all good.
Thanks to ODIN and sammobile and not to mentione XDA!
/Sam
187final said:
I was able to flash with Jelly Bean from the sammobile.com and now the phone looks all good.
Thanks to ODIN and sammobile and not to mentione XDA!
/Sam
Click to expand...
Click to collapse
Good job mate!
Don't forget to add [SOLVED] to the title of your post! :good:
Hi All Below I occidentally posted in the Galxy SI900 instead of here< I got the usual replies but was grateful all the same. Maybe someone might help before I revert to stock...
Hi all, I know this has been done and dusted but I am having problems with connecting to kies after rooting. I am running standard jelly bean 4.1.2 and is an Australian GT-I9100. I installed the siyah kernal root system and now all I get on kies is "connecting" Windows 7 recognises and I can access the phone via explorer on the PC. The phone after a while comes up with a message that there is no compatible software on the PC, install kies...
I have tried all the so called fixes including formatting the internal SD and memory. The only thing I did before it stopped connecting was the root and running Triangle away (paid version). I have enabled / disabled USB debugging. The only things I haven't tried is a factory reset which I don't really want to do as I am always sceptical that the backup apps will work after to restore everything.
Any help appreciated
Click to expand...
Click to collapse
The thread is here: http://forum.xda-developers.com/showthread.php?p=45907982#post45907982
Hope someone can help...
Regards Ismael
Did you try another PC or reinstall Kies? To know if the problem is in the phone or in PC?
jiseuo said:
Did you try another PC or reinstall Kies? To know if the problem is in the phone or in PC?
Click to expand...
Click to collapse
Yes, Kies definitely sees the phone as it comes up with GTI9100 loading on the left top and in the centre it just sits saying connecting. I think the phone is not seeing kies as the message on my phone always comes up only when trying to connect to kies.
I have tried 3 computers/laptops same result. Different USB cables original plus other really high end ones also. No Joy. Looks like if I want to connect to kies I must revert back to stock kernal as the firmware I never changed it is the OTA from samsung 4.1.2 and rooted the S2 only...
Also Not knowing Samsung but in the about on my Motorola Tablet/phone even when rooted when you try to check for updates they say none available, the samsung actually says "Your device has been modified, no updates available"...
IsmaelJones said:
Yes, Kies definitely sees the phone as it comes up with GTI9100 loading on the left top and in the centre it just sits saying connecting. I think the phone is not seeing kies as the message on my phone always comes up only when trying to connect to kies.
I have tried 3 computers/laptops same result. Different USB cables original plus other really high end ones also. No Joy. Looks like if I want to connect to kies I must revert back to stock kernal as the firmware I never changed it is the OTA from samsung 4.1.2 and rooted the S2 only...
Also Not knowing Samsung but in the about on my Motorola Tablet/phone even when rooted when you try to check for updates they say none available, the samsung actually says "Your device has been modified, no updates available"...
Click to expand...
Click to collapse
Now I am not using KIES, because I use AOSP ROM (4.3 Slimbean), but in past, when i was using STOCK ROM (XWLSN, XWLSS) I used "PhilZ-cwm6 - Safe Stock Based Kernel" http://forum.xda-developers.com/showthread.php?t=1877270 to root my phone.
If I remember correctly, KIES was working with PhillZ, but it is few months ago ...
So you can try PhillZ and see If it will work.(If do not need any special feature from syiah kernel of course)
jiseuo said:
If I remember correctly, KIES was working with PhillZ, but it is few months ago ...
So you can try PhillZ and see If it will work.(If do not need any special feature from syiah kernel of course)
Click to expand...
Click to collapse
Okay had a look at this, thanks. I do have a question though, my Kernel (PDA) is XWLSH, I have downloaded the 2 files but I am wondering how to install? Do I use my CW recovery or do I have to revert back to stock? A little confusing as he dowsn't really give instructions and I am pretty much an amateur when it comes to some of these things? Also I am running JB 4.1.2 he only mentions ICS 4.0.4? Help appreciated here...
Actually just re-read the post and I think I know now what to do. Correct me if I am wrong but the 2 files I downloaded are for 2 different methods of installing, the Zip file via SD card and the MD5 file by odin. Is this correct?
IsmaelJones said:
Actually just re-read the post and I think I know now what to do. Correct me if I am wrong but the 2 files I downloaded are for 2 different methods of installing, the Zip file via SD card and the MD5 file by odin. Is this correct?
Click to expand...
Click to collapse
Yes. ZIP is for flashing from recovery and tar.md5 is for flashing from ODIN.
Maybe the best way will be to reflash your whole stock firmware to get correct previous state before you started flashing syiah. You can get it on Sammobile.com - (simple registration needed) and then use PhilZ recomended method - flash ZIP from stock recovery
What is your Country / operator, Try this http://www.sammobile.com/firmwares/2/ to find right and latest oficial firmware for your country / operator version for your phone.
edit: For XWLSH it may be GT-I9100LKJXSA - unbranded australia version, or GT-I9100LKJOPS - Australia OPTUS operator customized version.
jiseuo said:
Yes. ZIP is for flashing from recovery and tar.md5 is for flashing from ODIN.
Maybe the best way will be to reflash your whole stock firmware to get correct previous state before you started flashing syiah. You can get it on Sammobile.com - (simple registration needed) and then use PhilZ recomended method - flash ZIP from stock recovery
What is your Country / operator, Try this http://www.sammobile.com/firmwares/2/ to find right and latest oficial firmware for your country / operator version for your phone.
edit: For XWLSH it may be GT-I9100LKJXSA - unbranded australia version, or GT-I9100LKJOPS - Australia OPTUS operator customized version.
Click to expand...
Click to collapse
Hi Again, solved the problem... definitely the siyah root was the culprit. I used mobile Odin to install the stock kernel, once done checked and could connect in kies and was still rooted missing busybox only. After that I again used mobile odin to install philZ, again no problems and all seems fine now. Everything working.
Thanks a million for helping and also many thanks to mobile odin developers as this is a far better tool than most and saves connecting to the PC Odin. Also seems a lot safer...
:good:
Hi guys!
This is my first time to post a thread in this forum, I just bought a Samsung Note with model SHV-E160S, Android Version 4.0.4 and Build# IMM76D.VH29. I know that this is a Korean Variant and I'm using it here in Philippines (I can send SMS -- Openline). I don't know if this phone is already rooted, I don't know how to check.
What I'm trying to accomplish is to upgrade this phone from 4.0.4 to 4.1.2 then later on upgrade it to Android Lollipop 5.1 and I don't know how. It will be a great pleasure if someone help me or direct me on what should I do.
I'm totally new to android devices and I'm not familiar on how to upgrade,update or root an android device.
Thanks!
Hello guys, any ideas? Thanks!
jakeortega said:
Hi guys!
This is my first time to post a thread in this forum, I just bought a Samsung Note with model SHV-E160S, Android Version 4.0.4 and Build# IMM76D.VH29. I know that this is a Korean Variant and I'm using it here in Philippines (I can send SMS -- Openline). I don't know if this phone is already rooted, I don't know how to check.
What I'm trying to accomplish is to upgrade this phone from 4.0.4 to 4.1.2 then later on upgrade it to Android Lollipop 5.1 and I don't know how. It will be a great pleasure if someone help me or direct me on what should I do.
I'm totally new to android devices and I'm not familiar on how to upgrade,update or root an android device.
Thanks!
Click to expand...
Click to collapse
Hello guys, any ideas? Thanks!
You'll be able to find your firmware here https://mega.nz/#F!IxJTDDQQ!TTgzxjX8d7EnzemoIj0ogg
4.1.2 was the last official update from Samsung for your device. If you want to update to newer than that, it will have to be done via updating with a custom recovery and custom rom, such as TWRP recovery and CyanogenMod 11 or 12/12.1.
Follow upgrade instructions from here http://forum.xda-developers.com/showthread.php?t=1424997 and sub your firmware file instead of N7000.
es0tericcha0s said:
You'll be able to find your firmware here https://mega.nz/#F!IxJTDDQQ!TTgzxjX8d7EnzemoIj0ogg
4.1.2 was the last official update from Samsung for your device. If you want to update to newer than that, it will have to be done via updating with a custom recovery and custom rom, such as TWRP recovery and CyanogenMod 11 or 12/12.1.
Follow upgrade instructions from here http://forum.xda-developers.com/showthread.php?t=1424997 and sub your firmware file instead of N7000.
Click to expand...
Click to collapse
Thank you es0tericcha0s for this information.
What I'm trying to do right now is updating my SHV-e160s from 4.0.4 to 4.1.2 using Kies v2.6. Unfortunately, I'm getting this error "Failed to run firmware upgrade: unknown error.". Until now, I'm afraid to update my firmware manually as I don't have much knowledge to do that.
1) Download firmware and Odin
2) Open Odin as admin
3) Load firmware in PDA or AP slot depending on which version of Odin used
4) Boot to Download Mode and plug in your phone
5) Once Odin recognizes it ( will show highlighted - COM:xx where "xx" is any number, doesn't matter which ones) hit start
6) Grab a drink and a snack and come back in 10 minutes or so
7) If device bootloops, reset in recovery
Once the files are downloaded, the whole process takes less than 10-12 minutes or so. Everything you need is in the guide I linked to besides the firmware you need, which is in the Mega link. If you need a video guide, there are dozens on YouTube. I find it much easier to use than Kies and once you have it working, then there are not many things you will do that restoring with Odin and a factory reset won't get you out of.
es0tericcha0s said:
1) Download firmware and Odin
2) Open Odin as admin
3) Load firmware in PDA or AP slot depending on which version of Odin used
4) Boot to Download Mode and plug in your phone
5) Once Odin recognizes it ( will show highlighted - COM:xx where "xx" is any number, doesn't matter which ones) hit start
6) Grab a drink and a snack and come back in 10 minutes or so
7) If device bootloops, reset in recovery
Once the files are downloaded, the whole process takes less than 10-12 minutes or so. Everything you need is in the guide I linked to besides the firmware you need, which is in the Mega link. If you need a video guide, there are dozens on YouTube. I find it much easier to use than Kies and once you have it working, then there are not many things you will do that restoring with Odin and a factory reset won't get you out of.
Click to expand...
Click to collapse
Alright, I'll try these steps immediately and will comeback for the result. Thanks again.
es0tericcha0s said:
1) Download firmware and Odin
2) Open Odin as admin
3) Load firmware in PDA or AP slot depending on which version of Odin used
4) Boot to Download Mode and plug in your phone
5) Once Odin recognizes it ( will show highlighted - COM:xx where "xx" is any number, doesn't matter which ones) hit start
6) Grab a drink and a snack and come back in 10 minutes or so
7) If device bootloops, reset in recovery
Once the files are downloaded, the whole process takes less than 10-12 minutes or so. Everything you need is in the guide I linked to besides the firmware you need, which is in the Mega link. If you need a video guide, there are dozens on YouTube. I find it much easier to use than Kies and once you have it working, then there are not many things you will do that restoring with Odin and a factory reset won't get you out of.
Click to expand...
Click to collapse
Hello, sorry I forgot to ask, will this root my device? I'm afraid I might bricked it.
No, this is just the official update. As long as the download is good and you follow those directions, you won't do anything that won't be easily recoverable if it doesn't work right away. Soft bricking is not a big deal and nothing you would do here would cause anything worse unless you unplug the phone in the middle of something important.
---------- Post added at 09:23 AM ---------- Previous post was at 09:20 AM ----------
And because you'll probably ask... It's easy to root. Just download Chainfire's SuperSU zip, put it on your phone's storage and use Odin to install TWRP recovery (just like you do with the whole firmware package) , boot to recovery before it boots to the OS and install the zip. Reboot and enjoy.
es0tericcha0s said:
No, this is just the official update. As long as the download is good and you follow those directions, you won't do anything that won't be easily recoverable if it doesn't work right away. Soft bricking is not a big deal and nothing you would do here would cause anything worse unless you unplug the phone in the middle of something important.
---------- Post added at 09:23 AM ---------- Previous post was at 09:20 AM ----------
And because you'll probably ask... It's easy to root. Just download Chainfire's SuperSU zip, put it on your phone's storage and use Odin to install TWRP recovery (just like you do with the whole firmware package) , boot to recovery before it boots to the OS and install the zip. Reboot and enjoy.
Click to expand...
Click to collapse
Hello again es0tericcha0s, I haven't tried the instructions that you gave me yesterday as I'm still downloading the firmware, last night I encountered an issue after enabling my Bluetooth, something like "NFC Service has stopped." just keeps on popping up. So I turned off the bluetooth then restarted my phone, it went well for a while.
After that, I enabled my 3G Cellular Data to check what was NFC service error is, after a few minutes, I lost my signal, phone turned to No Service, then in Settings -> About Phone, I got an Unknown Baseband.
EDIT
I got No Service since last night up until now.
EDIT Oct. 13, 2015 9:49 AM +08:00 Manila Time
I manage to update my phone from ICS 4.0.4 to JB 4.1.2. But still, my baseband is Unknown and I have no signal.
If it did that before you tried to flash anything...that doesn't sound good. Hard to say without testing it, but kind of sounds like the baseband chip (hardware issue).
es0tericcha0s said:
If it did that before you tried to flash anything...that doesn't sound good. Hard to say without testing it, but kind of sounds like the baseband chip (hardware issue).
Click to expand...
Click to collapse
I also though of that, hopefully not.
When I first got the phone, my gf sent me our pictures via bluetooth , no issues occured. After a while, I noticed that there are so many photos of the previous owner (around 1000+) and mp3s (around 1000+ also). So I connected the phone via usb to my pc and deleted all those pictures and mp3s inside the My Computer -> SHV-E160S -> Phone (Computer\SHV-E160S\Phone). After doing so, I started to encouter some issues, when enabling the bluetooth, the phone hangs and reboots then the error 'NFC service has stopped' keeps on popping up, until it went Unknown Baseband.
Now, the phone keeps on rebooting similar to the symptoms that it gets when baseband version is unknown.
I'm looking for solutions to fix the unknown baseband and saw the Back up and Restore EFS, I just need to root the device to try this fix. Maybe I'll post an update whether if I manage to solve this problem or not, if it didn't fix the issue then maybe the problem is the baseband chip. what a crap!
This is my reference for the EFS Fix
http://techbeasts.com/2014/07/13/fix-samsung-galaxy-unknown-baseband-version-guide/
Thanks!
Rooting will be easy. Just install TWRP with Odin and use the SuperSU zip from Chainfire. Process should take like 5 minutes once everything is downloaded.
es0tericcha0s said:
Rooting will be easy. Just install TWRP with Odin and use the SuperSU zip from Chainfire. Process should take like 5 minutes once everything is downloaded.
Click to expand...
Click to collapse
So I need to install TWRP first before rooting the device? Also I'm planning to use a rooted stock firmware which is 4.1.2, I just don't know the difference between UH24 and MH2, I've read that UH24 is already old and it's better to use a MH2 build and what is the Recovery UH24/MH2?
EDIT:
I forgot, I cannot check my current Baseband since it is still unknown.
EDIT: 12:30PM +8:00
I managed to get my Build#, it is MH2, I'm currently looking for a rooted 4.1.2 MH2 download link.
Way faster and easier to use the method I outlined, but either way should work.
es0tericcha0s said:
Way faster and easier to use the method I outlined, but either way should work.
Click to expand...
Click to collapse
Sorry, I'm really a root virgin here. While following your advise, I'm also currently looking at this guide -> http://forum.xda-developers.com/showthread.php?t=1924535. I'm done downloading Tegrak for MH2, a small problem I encountered here is I don't have a folder named 'sdcard' in my phone, so I created one and copied the 'Kernel' .zip, also I copied it to usbStorage folder.
I'm about to flash the 'Recovery' .tar to my phone. Hoping a success result
Should be fine. Your phone's internal storage is seen by the OS as /sdcard. Doesn't matter where you put the file as long as you remember where it's at so you can navigate to it through recovery to install.
es0tericcha0s said:
Should be fine. Your phone's internal storage is seen by the OS as /sdcard. Doesn't matter where you put the file as long as you remember where it's at so you can navigate to it through recovery to install.
Click to expand...
Click to collapse
Oh crap, I didn't thought of that. Installing 'Kernel' .zip now.
jakeortega said:
Oh crap, I didn't thought of that. Installing 'Kernel' .zip now.
Click to expand...
Click to collapse
Finally! I'm done rooting my phone, though I encountered another issues again. My Menu Button and Back Button does not work.
UPDATE: 4:08PM +8:00GMT
I think I found the problem as to why my Menu button and Back button doesn't work. I'v check my Baseband and it is -> E160SKSJMH1 and my Build # is -> JZO54K.E160SKSJMH2. Am I using a wrong FW as supposed to what I should be using? Which build should I install, the MH1 or the MH2?
Also, the Tegrak Kernel I've used is Build 48 for SHV-E160S MH2. I've also tried factory resetting the phone but the issue still exists.
Thanks!
UPDATE: 4:41PM +8:00GMT
Managed to fixed the issue by updating my Touch Firmware. Cool!