Hi everyone, my brother asked me to root his Sony Xperia U.
I tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=1933985
But it always says that it failed to root, attached the log file for you guys to see.
TugaSonic said:
Hi everyone, my brother asked me to root his Sony Xperia U.
I tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=1933985
But it always says that it failed to root, attached the log file for you guys to see.
Click to expand...
Click to collapse
do you install drivers at flashtool?
after install import device,Xperia U at flashtool
Ben Ling said:
do you install drivers at flashtool?
after install import device,Xperia U at flashtool
Click to expand...
Click to collapse
Yes, I installed drivers, when I go to import device it just says that there's no device to import.
Also, after trying one more time, when I press the confirm button (step 5 of the tutorial) it says that an error ocorred (it says something about memory and to try again),
TugaSonic said:
Yes, I installed drivers, when I go to import device it just says that there's no device to import.
Also, after trying one more time, when I press the confirm button (step 5 of the tutorial) it says that an error ocorred (it says something about memory and to try again),
Click to expand...
Click to collapse
For this you will need Flashtool and Xperia drivers intalled on your PC. (Installing Sony PC companion will do)
Well, what you need to do is download the kernel of previous version. I have attached a file but I am not sure if its the old version. (.10)
Flash FTF of your desired STOCK rom ICS via Flashtool.
Flash kernel of any version before 6.1.1.b.1.54 .
Root it using the file attached.
And you are done!
Make sure the USB tethering is ON in Settings >development !
I have attached the files on page 11 on this post:
http://forum.xda-developers.com/showthread.php?p=42244647#post42244647
Hnk1 said:
For this you will need Flashtool and Xperia drivers intalled on your PC. (Installing Sony PC companion will do)
Well, what you need to do is download the kernel of previous version. I have attached a file but I am not sure if its the old version. (.10)
Flash FTF of your desired STOCK rom ICS via Flashtool.
Flash kernel of any version before 6.1.1.b.1.54 .
Root it using the file attached.
And you are done!
Make sure the USB tethering is ON in Settings >development !
I have attached the files on page 11 on this post:
http://forum.xda-developers.com/showthread.php?p=42244647#post42244647
Click to expand...
Click to collapse
Just tried to flash the kernel and when I start the phone all I can see is a black screen (as wallpaper) and the normal icons on top (baterry, etc.) and I can't do anything else with the phone.
Is that normal? If so I just have to root it now with the file attached on your post right?
TugaSonic said:
Yes, I installed drivers, when I go to import device it just says that there's no device to import.
Also, after trying one more time, when I press the confirm button (step 5 of the tutorial) it says that an error ocorred (it says something about memory and to try again),
Click to expand...
Click to collapse
TugaSonic said:
Just tried to flash the kernel and when I start the phone all I can see is a black screen (as wallpaper) and the normal icons on top (baterry, etc.) and I can't do anything else with the phone.
Is that normal? If so I just have to root it now with the file attached on your post right?
Click to expand...
Click to collapse
NO, but don't worry.
Is your bootloader unlocked?
if not, this must be the reason.
if ýou have unlocked bootloader then,
Flash kernel again and root it using .10.
I am thinking you must have disconnected the phone in the middle.
Were you on administration when you tried to flash it ?
You must give administration rights to run the programme.
Were the drivers properly installed ?
A screen came and said to restore and then you didnot disconnect your phone till the programme asked you to ?
Have you followed instructions properly ?
IF all this doesnot work, Flash FTF of ICS of any ICS you like . Root it again !
I have rooted my phone so many times with the file i sent !
And you are using the option 1 when it asks you to root. You are rooting a mobile and not a tablet.
If anything you need to ask, I be writing you back!
Hnk1 said:
NO, but don't worry.
Is your bootloader unlocked?
if not, this must be the reason.
if ýou have unlocked bootloader then,
Flash kernel again and root it using .10.
I am thinking you must have disconnected the phone in the middle.
Were you on administration when you tried to flash it ?
You must give administration rights to run the programme.
Were the drivers properly installed ?
A screen came and said to restore and then you didnot disconnect your phone till the programme asked you to ?
Have you followed instructions properly ?
IF all this doesnot work, Flash FTF of ICS of any ICS you like . Root it again !
I have rooted my phone so many times with the file i sent !
And you are using the option 1 when it asks you to root. You are rooting a mobile and not a tablet.
If anything you need to ask, I be writing you back!
Click to expand...
Click to collapse
Hi again, I still haven't tried rooting since I don't have bootloader unlocked.
I tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=1527159
But when I went to verify if I can unlock my phone's bootloader it says No. Do I have to follow another tutorial? Or is it impossible?
TugaSonic said:
Hi again, I still haven't tried rooting since I don't have bootloader unlocked.
I tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=1527159
But when I went to verify if I can unlock my phone's bootloader it says No. Do I have to follow another tutorial? Or is it impossible?
Click to expand...
Click to collapse
As I suspected, your phone has come with locked bootloader. This means that Sony will not support your phone to be unlocked. The reason simply is they do not want to give out cheap phones so you can use any other sim on your phone. However, you can only run roms which support locked bootloader and you can not experiment much with your phone as it will brick your device. There are quite few roms which support locked bootloader. Further, the tutorial is simply from Sony and thus will not work for your phone!
Hnk1 said:
As I suspected, your phone has come with locked bootloader. This means that Sony will not support your phone to be unlocked. The reason simply is they do not want to give out cheap phones so you can use any other sim on your phone. However, you can only run roms which support locked bootloader and you can not experiment much with your phone as it will brick your device. There are quite few roms which support locked bootloader. Further, the tutorial is simply from Sony and thus will not work for your phone!
Click to expand...
Click to collapse
OK, one last thing, I found this rom (it says that works with locked bootloader): http://forum.xda-developers.com/showthread.php?t=194647
But in the instructions it says to flash it via CWM (I know that it's a custom recovery), I searched and the tutorials I found either ask for root or unlocked bootloader.
The text file attached in OP doesn't help much as I am not able to know which FW are you using.
I assume that the FW is greater than B.1.10 which Is why u are facing problems while rooting as the FW used in the guide in OP is B.1.10.
FYI, B.1.10 was directly rootable without much hassle just by following the guide but if you have a C.1.0 / B.1.89 / B.1.100 Stock Rom on your device then you will have to do some extra steps
Sent from my Xperia U using xda app-developers app
Mayank7795 said:
The text file attached in OP doesn't help much as I am not able to know which FW are you using.
I assume that the FW is greater than B.1.10 which Is why u are facing problems while rooting as the FW used in the guide in OP is B.1.10.
FYI, B.1.10 was directly rootable without much hassle just by following the guide but if you have a C.1.0 / B.1.89 / B.1.100 Stock Rom on your device then you will have to do some extra steps
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
On my phone it says, Build Number: 6.1.1.B.1.54
Here's the Rooting Process for you.
This Rooting guide applies to all FW versions above B.1.10.
1) Open Flashtool.
2) Click the Flash icon.
3) Select Flash Mode. (Make sure USB Debugging is ON in your Mobile Settings before connecting to PC)
4) Select & Flash the B.1.10 kernel. Then Reboot.
5) Select the Un-Lock icon and choose your preferred SU app & proceed.
6) Follow the on-screen instructions.
7) Now you have rooted your device.
8) Flash B.1.54 kernel and let the device reboot.
Downloads
B.1.10 Kernel - Download Here
B.1.54 Kernel - Download Here
Click to expand...
Click to collapse
Mayank7795 said:
Here's the Rooting Process for you.
This Rooting guide applies to all FW versions above B.1.10.
1) Open Flashtool.
2) Click the Flash icon.
3) Select Flash Mode. (Make sure USB Debugging is ON in your Mobile Settings before connecting to PC)
4) Select & Flash the B.1.10 kernel. Then Reboot.
5) Select the Un-Lock icon and choose your preferred SU app & proceed.
6) Follow the on-screen instructions.
7) Now you have rooted your device.
8) Flash B.1.54 kernel and let the device reboot.
Downloads
Click to expand...
Click to collapse
But I need the bootloader unlocked to follow that process, don't I?
TugaSonic said:
But I need the bootloader unlocked to follow that process, don't I?
Click to expand...
Click to collapse
You don't need to unlock your bootloader in case of flashing stock kernels.
Unlocking bootloader is necessary to flash custom built kernels.
Sent from my Xperia U using xda app-developers app
Mayank7795 said:
You don't need to unlock your bootloader in case of flashing stock kernels.
Unlocking bootloader is necessary to flash custom built kernels.
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
OK, thanks.
Just followed the process and now it's rooted.
Congrats..
Now I would request a MOD to close this thread as the problem has been solved. :good:
Related
I've got a problem, but I'm not sure if it's been addressed anywhere else on here, I've searched through several pages. I've found a situation that was similar, but not the same. So I'm putting it out there, and hoping someone will solve it:
I've got a Sony Ericsson Live with Walkman (WT19i)
I rooted my phone, unlocked it's bootloader, and flashed a ROM; everything went well until it rebooted. Now I'm stuck at the point where the "Sony Ericsson" logo is shown, i've been stuck there for almost 30 minutes now.
Any help possible? Any at ALL would be MUCH appreciated.
akshay7394 said:
I've got a problem, but I'm not sure if it's been addressed anywhere else on here, I've searched through several pages. I've found a situation that was similar, but not the same. So I'm putting it out there, and hoping someone will solve it:
I've got a Sony Ericsson Live with Walkman (WT19i)
I rooted my phone, unlocked it's bootloader, and flashed a ROM; everything went well until it rebooted. Now I'm stuck at the point where the "Sony Ericsson" logo is shown, i've been stuck there for almost 30 minutes now.
Any help possible? Any at ALL would be MUCH appreciated.
Click to expand...
Click to collapse
What ROM are you trying to flash on your phone?
Did you checked first if the Bootloader was actually unlocked?
Did you flash a custom kernel thru fastboot?
Custom ROM needs custom kernel.
Sent from my WT19i using xda premium
melander said:
What ROM are you trying to flash on your phone?
Did you checked first if the Bootloader was actually unlocked?
Did you flash a custom kernel thru fastboot?
Click to expand...
Click to collapse
I was trying to flash HYBROM.
Bootloader was unlocked for sure as I had installed Coconut previously, which also requires bootloader unlock.
No worries though; i solved my problem. I flashed an older firmware, along with a bootload relocker, with Flashtool. Now my phone has switched on, to my stock ROM. Still no clue how to flash hybrom ROM as it caused the same problem even after wiping dalvik cache and all other data (which was the solution provided by dev)
Someguyfromhell said:
Custom ROM needs custom kernel.
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Okay, please help me understand: What is a custom kernel and how do i install it? Everywhere I've looked there's been no mention of the need for a custom kernel
akshay7394 said:
Okay, please help me understand: What is a custom kernel and how do i install it? Everywhere I've looked there's been no mention of the need for a custom kernel
Click to expand...
Click to collapse
check first page of hybrom thread
Installation instructions
Needs unlocked bootloader
(actually hybrom does not contain a boot image.Thus, when you install hybrom you don't mess with your boot image at all.BUT recovery from nAa is installed in /system and while system is formated during the installation of hybrom,recovery messes with it self.That's why unlocked bootloader and a custom kernel with recovery is necessary for now to install hybrom)
Click to expand...
Click to collapse
melander said:
check first page of hybrom thread
Click to expand...
Click to collapse
I did not deny that a custom kernel is needed, I wanted to know how to flash/use a custom kernel?
To flash a custom kernel you need to have flashtool (sticky thread on the dev section) so:
1.- you download the custom kernel (it is a boot.img file)
2.- open flashtool
3.- connect your phone to your computer while the phone its off and you are holding the volume up key without releasing it the notification led should turn on blue.
4.- if the phone it's not recognized go to the flashtool folder and install the drivers located on the drivers folder once it is done repeat step 3 and it should be recognized.
5.- once your device it's connected click the thunderbolt icon on flashtool in the new screen select fastboot mode and continue.
6.- in the new screen click on select kernel to flash and browse to the boot.img you downloaded.
7.- check the flashtool log to make sure everything is fine if it is you are good to go.
Hope it helps.
ginryu said:
To flash a custom kernel you need to have flashtool (sticky thread on the dev section) so:
1.- you download the custom kernel (it is a boot.img file)
2.- open flashtool
3.- connect your phone to your computer while the phone its off and you are holding the volume up key without releasing it the notification led should turn on blue.
4.- if the phone it's not recognized go to the flashtool folder and install the drivers located on the drivers folder once it is done repeat step 3 and it should be recognized.
5.- once your device it's connected click the thunderbolt icon on flashtool in the new screen select fastboot mode and continue.
6.- in the new screen click on select kernel to flash and browse to the boot.img you downloaded.
7.- check the flashtool log to make sure everything is fine if it is you are good to go.
Hope it helps.
Click to expand...
Click to collapse
Thankyou, this does help. One last question: Are there several different custom kernels? Does WHICH kernel i get matter, or is any kernel usable on any phone?
akshay7394 said:
Thankyou, this does help. One last question: Are there several different custom kernels? Does WHICH kernel i get matter, or is any kernel usable on any phone?
Click to expand...
Click to collapse
Depending on the ROM, you want to install, you need correct kernel.
CM ROMs work only with FXP kernels, included in their topic.
MIUI ROMs have only specific kernels also, included in their topic.
Stock-based ROMs(XROM, Hybrom) work with Rage Kernel, X Kernel, bbooff's kernel, all these are in Development section, just search.
Glad to be helpful anything else just let us know.
Thanks very much!
I have a live with walkman from 3 etwork. the bootloader is locked. can I still flash hybrom 16 through CWM?
check service menu,
confirm if bootloader can be unlocked.
it should state "bootloader unlock allowed : yes".
after unlocking bootloader then there will be no problem installing hybrom
check this thread for more info about unlocking bootloader.
raymond_76 said:
I have a live with walkman from 3 etwork. the bootloader is locked. can I still flash hybrom 16 through CWM?
Click to expand...
Click to collapse
No. You must have unlocked bootloader. Also, for Hybrom, you must install custom kernel also.
Sent from my WT19i using xda premium
akshay7394 said:
I was trying to flash HYBROM.
Bootloader was unlocked for sure as I had installed Coconut previously, which also requires bootloader unlock.
No worries though; i solved my problem. I flashed an older firmware, along with a bootload relocker, with Flashtool. Now my phone has switched on, to my stock ROM. Still no clue how to flash hybrom ROM as it caused the same problem even after wiping dalvik cache and all other data (which was the solution provided by dev)[/QUO}
could you direct me through flash tool please
i have the exact same problem trying to load the same rom.
---------- Post added at 07:27 PM ---------- Previous post was at 07:22 PM ----------
raymond_76 said:
I have a live with walkman from 3 etwork. the bootloader is locked. can I still flash hybrom 16 through CWM?
Click to expand...
Click to collapse
I tried this now im stuck on the boot screen
Click to expand...
Click to collapse
Unlock your bootloader first.
What ROM are you trying to install?
Someguyfromhell said:
Unlock your bootloader first.
What ROM are you trying to install?
Click to expand...
Click to collapse
"ROM: CyanogenMod 7.2 FXP115"
The ROM you're using, is it good? and how (relatively) stable is it? Do the stereo speakers/Walkman button work?
akshay7394 said:
"ROM: CyanogenMod 7.2 FXP115"
The ROM you're using, is it good? and how (relatively) stable is it? Do the stereo speakers/Walkman button work?
Click to expand...
Click to collapse
Yes, it is fine for me, no problems at the moment. Stereo speakers require a tweak, link in my signature. Walkman button doesn't work.
Sent from my WT19i using xda premium
Someguyfromhell said:
Yes, it is fine for me, no problems at the moment. Stereo speakers require a tweak, link in my signature. Walkman button doesn't work.
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Fantastic How'd you flash it? same as hybrom? (Unlock bootloader then flash?)
Since i see many people having problems with installing cm9 on neo v, i've decided to help them
If you're a noob, have a look at this http://forum.xda-developers.com/showthread.php?t=1409269
If you're not a noob, proceed with the steps confirming that you have performed the steps
PLEASE FOLLOW THE STEPS CAREFULLY
THE REFERENCE LINKS GIVEN ARE ONLY MEANT FOR READING AND INFORMATION PLEASE DONT FOLLOW THEIR INSTRUCTIONS TO DO SOMETHING TO YOUR PHONE.
Step 1: PREPARE YOUR COMPUTER
http://www.youtube.com/watch?v=Khrxo0-NieM
it will explain a lot please watch it, download links are below
thanks for the video....
Downloads:
1)Android SDK- http://developer.android.com/sdk/index.html
2)ADB Drivers- http://www.mediafire.com/?6u1zl54w3jnvvax (just open the .cat files(x86/x64) and the drivers will be installed )
3)After watching the video, download (http://www.mediafire.com/?4qoenin9cjn7s7i) fastboot and place(copy paste) the 3 files in your android sdk directory>platform-tools(for me its C:\androidSDK\platform-tools)
if platform tools is not present, please follow the video again you have to instll "tools" package in SDK.
4)Flashtool- http://androxyde.github.com/ -go to the installation tab and download it (130 mb)
Step 2: ROOT THE PHONE
If you have no idea about rooting, have a look at this http://droidlessons.com/what-is-rooting-on-android-the-advantages-and-disadvantages/
How to know that you are rooted-lookout for "superuser" app in app drawer, if found, you have rooted your phone.
if you are on official ICS 4.0.3 ,
1)[ requirements ]
a)stock ICS firmware 4.1.A.0.562 for your device
b)ADB drivers installed (if u are not sure, then install http://icxperia.com/doomlord/Flashtool-drivers.exe)
c)the tool http://bit.ly/ert_xperia_2011_ics_1
2)[ READ THE FOLLOWING CAREFULLY! ]
This script will:
root ur device using "andorid emulator" trick
install Busybox (1.18.4)
install SU files (ICS specific)
do some checks for free space, tmp directory (will remove Google Maps if required)
Before u begin:
make sure u have installed adb drivers for ur device
enable "USB DEBUGGING" - from (Menu\Settings\Developer Options\Development)
enable "UNKNOWN SOURCES" - from (Menu\Settings\Security)
[OPTIONAL] increase screen timeout to 10 minutes
connect USB cable to PHONE and then connect to PC
skip "PC Companion Software" prompt on device
3)[ WARNING ]
make sure that no other adb server is running in background (e.g.: Flashtool, PCC, SEUS) and disable any antivirus
4)[ how to install? ]
Connect your phone in MSC (mass storage mode) mode(SD card can be viewed on PC)
make sure that you are on stock ICS firmware 4.0.3
download the files
extract ALL the files in the zip
now just double click on "runme.bat"
sit back read the on screen instructions
the device will reboot a couple of times
when the script finishes it will say "ALL DONE"
enjoy!
If you're on Official ICS 4.0.4 ,
1)Make sure that you have flashtool installed and that you're on official ICS 4.0.4
2)You'll have to flash baseband of 4.0.3
a)Download the 4.0.3 baseband - http://www.mediafire.com/?gwe739kn5mcx56t and place the .ftf file in C:\Flashtool\firmwares
b)connect phone inMSC (mass storage mode) mode
c)open flashtool and wait for a minute
d)on top left, click the lightning icon
e)flash mode>ok
f)select MT11i(devices), 4.1.A.0.562 (version)
g)make sure that wipe cache and app log is unchecked,dont exclude anything.
h)press ok and follow the steps
i)phone will boot once flashed(may take longer to boot, dont panic)
j)voilla!! now you're on 4.0.3
3)Now scroll up and follow the same steps for 4.0.3
4)runme.bat will root the phone
5)Enjoy the rooted phone!!!!
My thanks to doomlord and madfysh
IMPORTANT !!!!!!
ONCE ROOTED,
Download https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en and backup all your apps(on SD card)
Step 3(next step) of this post will reset(factory reset) your phone.
BACKUP ALL YOUR CONTACTS AND CALENDER ON GOOGLE
BACKUP ALL YOUR MESSAGES AND IMPORTANT STUFF !!
MAKE A BACKUP OF YOUR SD CARD ON PC FOR SAFETY (THIS WILL BE DONE AFTER ALL BACKUPS ARE DONE I.E. LAST BACKUP)
Step 3: UNLOCK BOOTLOADER
If you have no idea about this, read this
Why exactly is this a big deal? For the general population, this doesn’t matter. However, for the modding community, locked bootloaders are simply a pain. When the bootloader is locked, certain portions of the device are unable to be customized such as recoveries or kernels. A lot of the time, when rooting a device, the first step requires the bootloader to be unlocked or bypassed. So, depending on the device in question and the will of the developer, creative Android hacking has allowed some devices with locked bootloaders to run custom ROMs. Generally, these devices aren’t as stable as they could be if the device was able to be completely customized from the ground up.
1) http://unlockbootloader.sonymobile.com/ and follow the steps carefully ( skip step 13, we've already done that )
IF YOU GET STUCK ON STEP 14,DO THIS
to navigate to android SDK folder, use this command(without quotes)
"cd location_of_your_android_SDK\platform-tools"
for me, it was - "C:\androidSDK\platform-tools"
2)If you followed the rules, you will have an unlocked bootloader
3)Yipeeee !!!
4)Dont worry about your apps, they're still on your SD card
5)Restore only the apps which are very important and you cant live without them for a day..
Step 4: INSTALLING CWM(CLOCK WORK MOD / RECOVERY)
if you dont know what cwm is, just read but dont follow the steps to install it
http://www.addictivetips.com/mobile...-and-how-to-use-it-on-android-complete-guide/
1) http://www.mediafire.com/?73xv18tht0e8zt4 download cwm
2)Connect your phone in MSC (mass storage mode) mode and wait until SD card available to PC
3)increase your display time out to 2 minutes
4)Enable USB debugging and allow 3rd party/unknown sources
5)open the downloaded folder(extract first)
6)Run install-cwm1.cmd
7)sit back and enjoy!!!
8)once finished, you'll have cwm installed!!!!
9)to check if you have cwm, turn off phone
10)turn on and when sony logo appears, repeatedly press vol down button until you reach a blue colored menu, if successful, cwm is installed properly!! if not, please comment or reinstall it.
11)navigation in cwm-
go up-vol up
go down-vol down
select option-home button
previous menu-back button
thanks siddharthsure93
Step 5: TAKING A NANDROID BACKUP
if you have no idea about this, read this
http://forum.cyanogenmod.com/topic/38468-nandroid-backup-what-is-it-and-did-i-need-it/
make sure that your sd card has at least 1gb free space and you have 50% battery charge
1)Hoping that you have cwm installed, turn off phone
2)Enter cwm by repeatedly press vol down button when sony logo appears
3)go to "backup and restore"
4)select "backup"
5)wait for 10-15 minutes till your phone is backuped
6)now you have a copy of your current phone and rom memory
we do this to restore phone if something goes wrong
NOW YOU HAVE PREPARED YOUR PHONE TO GET CM9 OR ANY FU*KIN ROM !!! :good::good:
IF I GO WRONG SOMEWHERE, PLEASE CORRECT ME WE ALL LEARN FROM OUR MISTAKES.
PLEASE PRESS THE THANKS BUTTON IF I HELPED YOU
http://forum.xda-developers.com/showthread.php?p=29453825#post29453825
continue to this to install cm9 for neo v
the_neo_v_guy said:
Look people what i found !!!!!!
ROOTING is now super easy !!!
http://unlockroot.com/
This software can root any android device!!!
More than 500 devices supported !!!
so no need of flashing kernel !!!!!!
Click to expand...
Click to collapse
..
Support the Android 2.1,2.2 and 2.3
Click to expand...
Click to collapse
Another thread by you..
This makes me more sad...
geekynoob said:
Another thread by you..
This makes me more sad...
Click to expand...
Click to collapse
I'm sorry for that because i had no idea of sections at that time
but now everything's allright.
sorry for the inconvenience :/
the_neo_v_guy said:
I'm sorry for that because i had no idea of sections at that time
but now everything's allright.
sorry for the inconvenience :/
Click to expand...
Click to collapse
No sorry bro.. ur a 14yr old guy..just read the Forums..and the steps uv mentioned..there was no need for these threads..tonnnes of people using cm9 and other roms..But i hope its useful for someone..Pls take notice and b careful from now on..
Sorry if i was a bit rude..this work of mine is getting up into my head...
geekynoob said:
No sorry bro.. ur a 14yr old guy..just read the Forums..and the steps uv mentioned..there was no need for these threads..tonnnes of people using cm9 and other roms..But i hope its useful for someone..Pls take notice and b careful from now on..
Sorry if i was a bit rude..this work of mine is getting up into my head...
Click to expand...
Click to collapse
Yea, I may have helped some noobs, just made the steps clear because 3 months ago when i was a total noob at android and xda, i could only find android terms but not any thread that gave clear instructions, i had to google around for weeks until i could understand what everything was
Anyways, i do understand your mood, but what work are you on?
I just find a way to simple unlock any phone!
just visit http://www.fastgsm.com/en
For neo/v visit
http://www.fastgsm.com/en/page/how-...a-x8-x10-mini-pro-e15-e10-u20-so-01b-aspen-m1
I have a noob question
Im with a neo v with A.0.62 firmware
Which cannot be rooted
But i have already unlocked bootloader
what can I do now?
If i directly flash in JB Kernel and rom, will I be able to have root permissions? Do i even need to care about my .62 firmware if i want to go into CM10?
What should i do? Thanks!
Sent from my SHV-E120L using xda app-developers app
wilfacts said:
I have a noob question
Im with a neo v with A.0.62 firmware
Which cannot be rooted
But i have already unlocked bootloader
what can I do now?
If i directly flash in JB Kernel and rom, will I be able to have root permissions? Do i even need to care about my .62 firmware if i want to go into CM10?
What should i do? Thanks!
Sent from my SHV-E120L using xda app-developers app
Click to expand...
Click to collapse
You will need to root your phone first. Installing a custom ROM won't automatically give you root acces. In fact, I don't think you will be able to install a custom ROM without ClockWork Mod Recovery which needs root access first. Follow Sony's own rooting guide here: http://talk.sonymobile.com/thread/41119?start=0&tstart=0. Then install X-Parts from the Play Store to get CWM.
Once you have CWM you can install any appropriate custom ROM you like.
Oh is that gonna be painful
Iv unlocked bootloaded with .62 firmware
So i cant get to official ics and stucked with the .62, flashing an older firmware for the root is risky? After that i have to go back to .62 again?
so confused
Sent from my SHV-E120L using xda app-developers app
AW: [NOOB-GUIDE][ALL IN ONE GUIDE][NEO V]Xperia Neo V PREPARING PHONE AND PC FOR ANY
wilfacts said:
Oh is that gonna be painful
Iv unlocked bootloaded with .62 firmware
So i cant get to official ics and stucked with the .62, flashing an older firmware for the root is risky? After that i have to go back to .62 again?
so confused
Sent from my SHV-E120L using xda app-developers app
Click to expand...
Click to collapse
Use flash tool and an ftf file to update to ICS. You can go with 0.587 version for example.
After update as you are on unlocked bootloader you should flash a custom ICS kernel like suave, night elf or any other ICS compatible. This will give you root and cwm.
Look at the stickys. You will find all you need.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
wilfacts said:
Oh is that gonna be painful
Iv unlocked bootloaded with .62 firmware
So i cant get to official ics and stucked with the .62, flashing an older firmware for the root is risky? After that i have to go back to .62 again?
so confused
Sent from my SHV-E120L using xda app-developers app
Click to expand...
Click to collapse
You can always relock the bootloader (don't know what method you used to unlock, so can't advise on how to relock - I only know how if unlocking was done through Sony). Update the firnware to stock Sony ICS using Sony's PC Companion. Then root it using Sony's rooting guide. After rooting you can unlock the bootloader again. Install X-Parts and CWM. Then try out the custom ROMs+kernels to your heart's content.
neo668 said:
I only know how if unlocking was done through Sony
Click to expand...
Click to collapse
Could you share how? I've heard if its officially unlocked, you cannot lock it again.
BlitzBerg said:
Could you share how? I've heard if its officially unlocked, you cannot lock it again.
Click to expand...
Click to collapse
On the other hand,unlocking via official method gives you an easy option to Relock bl via flashtool!
There's a thread by Blagus on how to do that!
Btw even Relocking via setool is an option for unofficially unlocked bl users!
So there's always an option!
Sent from my MT11i using xda premium
If this is what you're talking about, I've read it. But will it allow me to use the PC Companion and receive updates(Although I hardly feel there's going to be more than 1 update)/ Go back to official Sony ROM?
BlitzBerg said:
If this is what you're talking about, I've read it. But will it allow me to use the PC Companion and receive updates(Although I hardly feel there's going to be more than 1 update)/ Go back to official Sony ROM?
Click to expand...
Click to collapse
Yes. That's the tutorial I'm talking about. I only mentioned what I did because I've done it before. After relocking use PC Companion to update your phone. Or the Sony phone repair program. I don't remember which. If you try both (like I did) one (or both) of them will work. But still you are out of warranty. You know that, don't you?
---------- Post added at 08:20 AM ---------- Previous post was at 07:54 AM ----------
BlitzBerg said:
Could you share how? I've heard if its officially unlocked, you cannot lock it again.
Click to expand...
Click to collapse
http://unlockbootloader.sonymobile.com/
neo668 said:
Yes. That's the tutorial I'm talking about. I only mentioned what I did because I've done it before. After relocking use PC Companion to update your phone. Or the Sony phone repair program. I don't remember which. If you try both (like I did) one (or both) of them will work. But still you are out of warranty. You know that, don't you?
Click to expand...
Click to collapse
Basically its all about DRM loss. What do I exactly lose? Only trackid? I suppose the newer versions run on unlocked bootloaders as well.
BlitzBerg said:
Basically its all about DRM loss. What do I exactly lose? Only trackid? I suppose the newer versions run on unlocked bootloaders as well.
Click to expand...
Click to collapse
I think you are right. It's basically about losing DRM. I don't know what it is and of what use it is. All I know is I've never missed it. If you are into trying out custom ROMs then unlocking the bootloader is a must because certain custom ROMs need custom kernels. To install custom kernels you must have an unlocked bootloader.
Hi, i have the xperia mini pro with ICS 4.0.4,not rooted.I have unlocked the bootloader succesfully [or i think so]
I want to root my device and then install cyanogenmod, but when i try to use flashtool [either for downgrade or do the Neo V kernel trick] it says my that it doesn't recognize my device and i have to install the drivers.
i installed all the drivers from flashtool\drivers\install drivers.exe and also the ADB drivers that i found on a thread here [http://forum.xda-developers.com/showthread.php?t=1701357]
i know that when it says that i should press the back button,i press the volume-.
i've tried this on 3 diferent PCs,so either i am doing something wrong,or my device is not working properly.
Any help? Thanks in advance.
Regular_John said:
Hi, i have the xperia mini pro with ICS 4.0.4,not rooted.I have unlocked the bootloader succesfully [or i think so]
I want to root my device and then install cyanogenmod, but when i try to use flashtool [either for downgrade or do the Neo V kernel trick] it says my that it doesn't recognize my device and i have to install the drivers.
i installed all the drivers from flashtool\drivers\install drivers.exe and also the ADB drivers that i found on a thread here [http://forum.xda-developers.com/showthread.php?t=1701357]
i know that when it says that i should press the back button,i press the volume-.
i've tried this on 3 diferent PCs,so either i am doing something wrong,or my device is not working properly.
Any help? Thanks in advance.
Click to expand...
Click to collapse
Don't Worry.
Just need to install your mobile's driver.
You need to go- C:/Flashtool/Drivers/Flashtool-drivers.exe, then select your corresponding Phone Model & Install it.
Don't Forget to press Thanks Button
Regular_John said:
Hi, i have the xperia mini pro with ICS 4.0.4,not rooted.I have unlocked the bootloader succesfully [or i think so]
I want to root my device and then install cyanogenmod, but when i try to use flashtool [either for downgrade or do the Neo V kernel trick] it says my that it doesn't recognize my device and i have to install the drivers.
i installed all the drivers from flashtool\drivers\install drivers.exe and also the ADB drivers that i found on a thread here [http://forum.xda-developers.com/showthread.php?t=1701357]
i know that when it says that i should press the back button,i press the volume-.
i've tried this on 3 diferent PCs,so either i am doing something wrong,or my device is not working properly.
Any help? Thanks in advance.
Click to expand...
Click to collapse
If you want to flash cyanogenmod, you don't need to root. Just flash the cyanogenmod kernel (which is prerooted and has cwm included) and after that install the rom. For that check out how to install custom roms/kernels (in my signature).
And remember: NEVER EVER DO UPDATES OVER THE AIR IF THE BOOTLOADER IS UNLOCKED!!! OTHERWISE YOUR PHONE WILL BRICK, SO DON'T ACCEPT UPDATES FROM UPDATE CENTER ON PHONE!!!!!
To root ics just flash a prerooted kernel for ics like rage kernel for ics
Greets
Regular_John said:
Hi, i have the xperia mini pro with ICS 4.0.4,not rooted.I have unlocked the bootloader succesfully [or i think so]
I want to root my device and then install cyanogenmod, but when i try to use flashtool [either for downgrade or do the Neo V kernel trick] it says my that it doesn't recognize my device and i have to install the drivers.
i installed all the drivers from flashtool\drivers\install drivers.exe and also the ADB drivers that i found on a thread here [http://forum.xda-developers.com/showthread.php?t=1701357]
i know that when it says that i should press the back button,i press the volume-.
i've tried this on 3 diferent PCs,so either i am doing something wrong,or my device is not working properly.
Any help? Thanks in advance.
Click to expand...
Click to collapse
Actually, I was also having same problem..
better try on Windows XP.. Make sure you enable "USB Debugging" , "Unknown Sources" & "Mass Storage Mode"
even if you miss anything, it is not possible to root.. Make sure all of the above.. i bet you can root 100%
@ arifkpi, did you even read the whole op's thread? he clearly says he did install the drivers from the folder...
After installing the driver, without using flashtool, switch the phone off and connect it both in flash mode and fastboot mode (first holding vol+ then vol-) windows (i am supposing you are on windows?) will ask for the connected device drivers, tell it to search them automatically in the computer, then try again.
It happened to me too , what I did was after installing the flashtool drivers I uninstalled flashtool and re-installed it and it worked perfectly! I think at first the flashtool didn't recognize the installed drivers, after uninstalling and reinstalling flashtool it was able to recognize the drivers . And to be on the safer side check all the flashtool drivers in the drivers installation page .
Press thanks if I helped!
Sent from my smultron using xda app-developers app
Uninstall flashtool. Be sure to have "PC companion installed" it is needed for drivers.Connect to pc companion in every mode before flashing and let the drivers to be installed.(MTP mode,MSC mode,USB Debugging mode). Then install drivers from flashtool/drivers for your device. Hope this helps.One more thing,get the latest version of flashtool : http://androxyde.github.com/index.html?1349340558000
---------- Post added at 02:58 PM ---------- Previous post was at 02:49 PM ----------
Regular_John said:
I have unlocked the bootloader succesfully [or i think so]
Click to expand...
Click to collapse
For checking if you have successfully unlocked you bootloader,
Dial: *#*#7378423#*#*
Go to "Software info"
See "S1 boot version"
If there is "R9A...",your bootloader is locked
If there is "r9A..." your bootloader in unlocked
So,"R" indicates locked and "r" indicates unlocked bootloader.
Finally, after one month of I manage to install CynogemMod 9.1.0-mango with Android version 4.0.4. I read so many blogs and forums but some how the methods are not working for me. So, I mixed my own experience and altered some steps and bang, now it's cracked, just have had to compromise with Sony Bravia Engine.
alone_in_dark said:
Uninstall flashtool. Be sure to have "PC companion installed" it is needed for drivers.Connect to pc companion in every mode before flashing and let the drivers to be installed.(MTP mode,MSC mode,USB Debugging mode). Then install drivers from flashtool/drivers for your device. Hope this helps.One more thing,get the latest version of flashtool : http://androxyde.github.com/index.html?1349340558000
---------- Post added at 02:58 PM ---------- Previous post was at 02:49 PM ----------
For checking if you have successfully unlocked you bootloader,
Dial: *#*#7378423#*#*
Go to "Software info"
See "S1 boot version"
If there is "R9A...",your bootloader is locked
If there is "r9A..." your bootloader in unlocked
So,"R" indicates locked and "r" indicates unlocked bootloader.
Click to expand...
Click to collapse
Thanks for the info, but i don't understand how this can be...i unlocked the bootloader with this tool http://forum.xda-developers.com/showthread.php?t=1560613 and i checked it, in service info it says bootloader unlocked: Yes, and then i looked at what you said, and i have "R9A"...? I don't get it, maybe it's another way around? I have xperia mini st15i
Flashtool for sk17a...
mihahn said:
If you want to flash cyanogenmod, you don't need to root. Just flash the cyanogenmod kernel (which is prerooted and has cwm included) and after that install the rom. For that check out how to install custom roms/kernels (in my signature).
And remember: NEVER EVER DO UPDATES OVER THE AIR IF THE BOOTLOADER IS UNLOCKED!!! OTHERWISE YOUR PHONE WILL BRICK, SO DON'T ACCEPT UPDATES FROM UPDATE CENTER ON PHONE!!!!!
To root ics just flash a prerooted kernel for ics like rage kernel for ics
Greets
Click to expand...
Click to collapse
Guys... The only way that is working over here to load JB rom is using the FlashTool... I Tried a lot to use the bootload... but I couldn't get my xperia rooted...
So... There is a file to upload the JB rom using Flashtool?
Hi! Just a quick question, I can't see the Xperia mini pro sk17i component in the list when I install the flashtool drivers. Please help
Regular_John said:
I have unlocked the bootloader succesfully [or i think so]
Click to expand...
Click to collapse
First:You will not have to root your device to install Cyanogenmod, nor is there any need to downgrade, IF you unlocked the bootloader.
Okay, try to solve this systematically.
1) Check if your bootloader is unlockable, described here: http://forum.xda-developers.com/showthread.php?t=1879750
and check if your Bootloader is really unlocked.
2) If not, follow the instructions from sony (http://unlockbootloader.sonymobile.com) or the same thread (http://forum.xda-developers.com/showthread.php?t=1879750).
Regular_John said:
I want to root my device and then install cyanogenmod, but when i try to use flashtool.
Click to expand...
Click to collapse
If you unlocked the bootloader (see above), you do not need a special version of flashtool or root your device, everything you need is available from google and cyanogenmod. Are you working on Windows? You will need to install drivers as some of the posters here already pointed out. However, i personally always use Ubuntu for everything Android and this works usually well.
To install Cyanogenmod, you will use flashtool. Your device has to be in flashmode. Turn your device off. Wait a few seconds, hold Volume down and connect the usb cable while holding vol down. Full instructions for installing Cyanogenmod on Mango are here: http://wiki.cyanogenmod.org/w/Mango_Info
Just install everything
Does work.
Don't forget to hit thanks
My phone is not on the Flashtool drivers list??
Hi,
I want to flash my Sony Ericsson XPERIA Mini ST15, but when I try to flash it says:
ERROR - Drivers need to be installed for connected device.
ERROR - You can find them in the drivers folder of Flashtool.
Well, I can't find my phone
If someone knows the solution, please let me know!
Thanks
ImAFriendlyOrange said:
Hi,
I want to flash my Sony Ericsson XPERIA Mini ST15, but when I try to flash it says:
ERROR - Drivers need to be installed for connected device.
ERROR - You can find them in the drivers folder of Flashtool.
Well, I can't find my phone
If someone knows the solution, please let me know!
Thanks
Click to expand...
Click to collapse
Just install all drivers for all modes/devices from flashtool - drivers and you should be good to go
Sent from my Nexus 4 running Android 4.3
Where to download??
mihahn said:
Just install all drivers for all modes/devices from flashtool - drivers and you should be good to go
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
Oh
Do you know where I can download this? Or how I should do it?
Please help me out (I'm sorry but I'm new to this kinda stuff :)
Thanks, :highfive:
ImAFriendlyOrange said:
Oh
Do you know where I can download this? Or how I should do it?
Please help me out (I'm sorry but I'm new to this kinda stuff :)
Thanks, :highfive:
Click to expand...
Click to collapse
It's in the flashtool installation folder - drivers
Sent from my Nexus 4 running Android 4.3
Thanks!!
mihahn said:
It's in the flashtool installation folder - drivers
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
Yay!! It works!
Thanks, dude!!
ImAFriendlyOrange said:
Yay!! It works!
Thanks, dude!!
Click to expand...
Click to collapse
No problem, great to hear it works! For any further questions, just ask
Sent from my Nexus 4 running Android 4.3
Question about DooMLoRD's Xperia rooting kit
mihahn said:
No problem, great to hear it works! For any further questions, just ask
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
I managed to flash my phone back to the standard Android 2.3.
Then I tried to root my phone using DooMLoRD's Xperia ICS Rooting Tool v1.0, when I start it it says this: (look in attachments)
Here comes my question: what are abd drivers?
Please help!
Thanks
Requirements:
Root
Installation:
Unpack .zip on the desktop.
Turn off antivirus, PC Companion, Flashtool, any other adb processes.
Connect the phone to the PC.
Run install.bat.
Choose item #1.
On the phone allow root access.
At the end of the script working press any button on PC keyboard.
To enter in CWM after first vibration press (not hold) several times volume button + until the second vibration.
Download:
Recovery_SP.zip
Script for Linux users
CWM and TWRP !!!
Tested and working !
I'm on rooted c5303 .257 with locked bootloader
alivanov79 said:
Requirements:
Root
Installation:
Unpack .zip on the desktop.
Turn off antivirus, PC Companion, Flashtool, any other adb processes.
Connect the phone to the PC.
Run install.bat.
Choose item #1.
On the phone allow root access.
At the end of the script working press any button on PC keyboard.
Download:
Recovery_SP.zip
Click to expand...
Click to collapse
is it working for all firmware and models of xperia sp?????
mansoorarb said:
is it working for all firmware and models of xperia sp?????
Click to expand...
Click to collapse
Yes
alivanov79 said:
Yes
Click to expand...
Click to collapse
i cnt get in recovery mode.....pls explain how to get into it......i used quickboot app.....but no use.....
mansoorarb said:
i cnt get in recovery mode.....pls explain how to get into it......i used quickboot app.....but no use.....
Click to expand...
Click to collapse
Volume button +
Got it.. ...working nw.. ...but it doesnt work with quickboot app
Sent from my C5302 using xda premium
Thank you so much!!!
Gotta love you guys.
Thx for the effort. Works like a charm
Now mods and custom roms will follow
U saved Me..
Bro
Actually before 10 minutes i just take decision to unlock my bootloader and flash doom kernel for flashing the deodexed .284 firmware... I downloaded all the files and just start to unlock my bootloader via sony site.. But my mind tell just check SP thread for some things and i check .. God .... U save me from unlocking the bootloader and missing the Bravia Engine 2...
Thanks a lot bro.. u r great...
Are you having issues with touch when connected to the charger? Also the Phone does not stay in off mode and turns on / boots up when I plug in.
I think you should look into the chargermon files.. many members report similar issues.
it worked like a charm :victory: so now do i have any need to unlock bootloader? i can install custom roms using cwm, right?
EDIT: I have just read on net that bootloader unlocking is necessary to install any custom ROM, then what is the point to make CWM for locked BL?
dhiman33 said:
it worked like a charm :victory: so now do i have any need to unlock bootloader? i can install custom roms using cwm, right?
EDIT: I have just read on net that bootloader unlocking is necessary to install any custom ROM, then what is the point to make CWM for locked BL?
Click to expand...
Click to collapse
So you can install mods, backup system, use custom stock roms.... This is worth it.
Custom roms like cm,asop,Pac etc all need bootloader unlocked, as they use custom kernels.
Sent from my C5303 using xda premium
To uninstall this, should I flash a stock ROM? or there are any easier methods?
If I can remember correctly from se arc forum there are 3 files you need to delete the main one is in system/bin-delete file called recovery.tar this will in effect delete cwm....
But I would leave installed as it is handy.
Sent from my C5303 using xda premium
If I want to uninstall and also unroot, but since my country ftf file is not there, so I can use SUS to repair the phone (since it's also download the firmware file) or just once I download then I convert to ftf file and flash via flashtool?
If you flash phone using sus root and cwm will be gone as they are installed into system just like normal apps.
Sent from my C5303 using xda premium
sxrmafia said:
Are you having issues with touch when connected to the charger? Also the Phone does not stay in off mode and turns on / boots up when I plug in.
I think you should look into the chargermon files.. many members report similar issues.
Click to expand...
Click to collapse
No such issues on me c5303 stock
alivanov79 said:
Requirements:
Root
Installation:
Unpack .zip on the desktop.
Turn off antivirus, PC Companion, Flashtool, any other adb processes.
Connect the phone to the PC.
Run install.bat.
Choose item #1.
On the phone allow root access.
At the end of the script working press any button on PC keyboard.
Download:
Recovery_SP.zip
Click to expand...
Click to collapse
it works! thanks a lot!
sxrmafia said:
Are you having issues with touch when connected to the charger? Also the Phone does not stay in off mode and turns on / boots up when I plug in.
I think you should look into the chargermon files.. many members report similar issues.
Click to expand...
Click to collapse
This happened to me to but i didn't flash cwm on my device. Any way i fixed it by re flashing the Stock firmware
Downloaded DooMLoRD_Easy-Rooting-Toolkit_v17_perf-event-exploit> and prepared for root by enabling usb developer option and enabled unknown sources.
Used the runme.bat however got following:
Changelog is posted here: http://bit.ly/ert_log
Device detected: SGP311 (10.3.1.C.0.136)
SGP311 (10.3.1.C.0.136) is not supported.
You need to manage to get remap_pfn_range addresses.
--- cleaning
--- Please wait device is now rebooting
ALL DONE!!!
Press any key to continue . . .
Any help is truly appreciated! Thanks!!!
DoomLord exploit non working on 4.2.2 rom so you have to root it with vroot (http://www.mgyun.com/vroot), it works
ibis69 said:
DoomLord exploit non working on 4.2.2 rom so you have to root it with vroot (http://www.mgyun.com/vroot), it works
Click to expand...
Click to collapse
can read anything on this page.
flash this image
guyenxda000 said:
Downloaded DooMLoRD_Easy-Rooting-Toolkit_v17_perf-event-exploit> and prepared for root by enabling usb developer option and enabled unknown sources.
Used the runme.bat however got following:
Changelog is posted here: http://bit.ly/ert_log
Device detected: SGP311 (10.3.1.C.0.136)
SGP311 (10.3.1.C.0.136) is not supported.
You need to manage to get remap_pfn_range addresses.
--- cleaning
--- Please wait device is now rebooting
ALL DONE!!!
Press any key to continue . . .
Any help is truly appreciated! Thanks!!!
Click to expand...
Click to collapse
Just flash this image to get root access
download the attached zip and unzip it to get the boot.img ,it is named as "root-4.2.img"
follow the following steps: (im not responsible if you mess up)
1. enable usb debugging from the developer settings and then connect it to the computer
2. open command prompt an enter the following command :-
" adb reboot bootloader "
3. now your tablet should go into fastboot mode
4. now enter the following command
" fastboot flash boot root-4.2.img "
5. once done flashing and sending the image to the device, nter the following command to reboot it safely :-
" fastboot reboot "
6. now your tablet should be booted up, download root checker app from the playstore to make sure u have root access
7. All Done
i tried it on xtz sgp311 running 4.2.2 :angel:
please let u know if u were successful or if u need any more assistance :good:
View attachment root-4.2.zip
hassanman1997 said:
Just flash this image to get root access
download the attached zip and unzip it to get the boot.img ,it is named as "root-4.2.img"
follow the following steps: (im not responsible if you mess up)
1. enable usb debugging from the developer settings and then connect it to the computer
2. open command prompt an enter the following command :-
" adb reboot bootloader "
3. now your tablet should go into fastboot mode
4. now enter the following command
" fastboot flash boot root-4.2.img "
5. once done flashing and sending the image to the device, nter the following command to reboot it safely :-
" fastboot reboot "
6. now your tablet should be booted up, download root checker app from the playstore to make sure u have root access
7. All Done
i tried it on xtz sgp311 running 4.2.2 :angel:
please let u know if u were successful or if u need any more assistance :good:
View attachment 2414587
Click to expand...
Click to collapse
That won't work unless he has a unlocked bootloader, which I assume he doesn't. So he either unlocks the bootloader (which might end creating problems, as he might forget to backup TA partition)) or uses the straightforward VRoot
Sent from my SGP311 using Tapatalk
guyenxda000 said:
can read anything on this page.
Click to expand...
Click to collapse
To download the tool, click on the big blue rectangular button located underneath the large white word ROOT.
gowan how do i know if it is locked bootloader?
I found some info on google about ta partition backup that it contains drm keys for prop soft etc.,
So may be this is the first step I shd do if it is locked bootloader.
Now it is restoring ta will get you to point in unlocked state.
Questions becomes will it be possible to restore TA partition and stay in unlocked mode?
Also help is for xperia phone z. Not sure it is same as xperia z tablet.
Thanks,
My Odd Xperia Z C6606
I have this same issue, Except my firmware is slightly newer, 10.3.1.E.0.191, I don't think I can make a new pfn address without root or boot loader access. I'm stuck
I don't get why everyone is having such an issue with rooting this firmware. Grab an ftf of an old ie. Rootable firmware for your tab flash with flash tool,root it,put a custom recovery on, and then grab the files and follow this guide
http://forum.xda-developers.com/showthread.php?p=48904390 there you go no need to void warranty or lose drm keys
Sent from my C6603 using xda app-developers app
gordo79 said:
I don't get why everyone is having such an issue with rooting this firmware. Grab an ftf of an old ie. Rootable firmware for your tab flash with flash tool,root it,put a custom recovery on, and then grab the files and follow this guide
http://forum.xda-developers.com/showthread.php?p=48904390 there you go no need to void warranty or lose drm keys
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
would this method work with 4.3?
i use Kingo Android ROOT :laugh:
Dimitris Dinozzo said:
i use Kingo Android ROOT :laugh:
Click to expand...
Click to collapse
does it work with 4.3?
xuanphucn said:
would this method work with 4.3?
Click to expand...
Click to collapse
Yes. Just look at the second post for instructions if you already are on 4.3. Just make sure you use the files for your device
Sent from my LT26i using Tapatalk
yes i have the SGP321 android 4.3 and work this program make all so easy .. you dont need drivers or sdk...
Felimenta97 said:
Yes. Just look at the second post for instructions if you already are on 4.3. Just make sure you use the files for your device
Sent from my LT26i using Tapatalk
Click to expand...
Click to collapse
one more question. I have the SGP31 U.S. version. so i need to download the SGP311: Custom NORDIC 10.4.B.0.577 file, correct? Im new to xperia tablet
xuanphucn said:
one more question. I have the SGP31 U.S. version. so i need to download the SGP311: Custom NORDIC 10.4.B.0.577 file, correct? Im new to xperia tablet
Click to expand...
Click to collapse
Yes. You just have to look at the SGP3xx thing. It must be the same as yours.
Felimenta97 said:
Yes. You just have to look at the SGP3xx thing. It must be the same as yours.
Click to expand...
Click to collapse
one more thing. i just update my tablet to 4.3. is the bootloader on 4.3 unlocked? I saw on sony website that sony will unlock bootloader but i dont want to void my warranty so is there anyway to unlock bootloader on 4.3 without voiding my warranty? Thanks.
xuanphucn said:
one more thing. i just update my tablet to 4.3. is the bootloader on 4.3 unlocked? I saw on sony website that sony will unlock bootloader but i dont want to void my warranty so is there anyway to unlock bootloader on 4.3 without voiding my warranty? Thanks.
Click to expand...
Click to collapse
No. The bootloader doesn't unlock just because you updated your device. And no, there is no way to unlock the bootloader without voiding your warranty. And, remember, always backup your TA keys before unlocking the bootloader.
Sent from my SGP311 using Tapatalk