Related
Just saw it today. Otterbox is going to have a case for the slide!
Otterbox dot come and look under HTC cases!
I saw it about a week ago. Its a bit basic looking, but knowing them it's as tough as a brick s%!t house. I own several of their products and can vouch for them. Great products.
Looks good, the more aftermarket support the better!
Finally!!
My only gripe is $35.00 for a case is off the chain!
But seeing as they'll be the only manufacturer of a good case
for this phone I'll shut up and pay.
Same, i had an otterbox for my BB. It was kind of a race, who would release my case first? Otterbox or Siedio? Looks like Otter wins.
Thanks drazile, finally something of what appears to be superb quality.
I ranted and raved to them wanting a case and was told basically due to the split slider design that they would not likely make one. I went back and forth for a month or more. Then finally ditch my slide for a vibrant and now I hear this! Well its still a great thing. Wife has my slide now so I may get one for her if I can talk her into giving up that god awful rhine stone monstrosity she has now.
Direct Link
Still listed as coming soon, I put my e-mail in to be notified when it will be available so I will let you know when I get it. Love this phone, but it sure hasn't gotten the love from accesory makers.
Sent from my T-Mobile myTouch 3G Slide using XDA App
This is definitely exciting. Been holding out on buying a case so I wouldn't waste money on garbage. Looks like I'll finally have a place to drop some money at.
Sent from my T-Mobile myTouch 3G Slide using XDA App
does anyone know when this case will be available?
Body Glove.
I've been waiting for this too, but now body glove has one for 25 that looks better than what I see on the otterbox page. I dont think they are going to have a defender series.
gillaney said:
I've been waiting for this too, but now body glove has one for 25 that looks better than what I see on the otterbox page. I dont think they are going to have a defender series.
Click to expand...
Click to collapse
Which body glove case are your referring to? Hopefully it isn't the one sold through tmo. That case cost a decent bit and was total garbage if you took the case off more then a couple times. The real problem with putting a case on a slide type phone is that there is nowhere for the case to get a good grip. They rely on these thin tabs that must be thin in order to fit in the cracks and not cause friction, but being thin causes them to bend and wear quickly when case is taken off repeatedly. So if you have a couple batteries that you like to switch between, a case is likely not for you on this phone. Im hoping this otterbox case will be different somehow, perhaps very high quality tabs. I would love to buy one for my wife but I certainly wont be a guinea pig after that pos body glove case.
bulkyglove cases ...
This bodyglove case looks to have a bit better coverage on the screen part of the slide than the one tmo sells. My issue with the bodyglove cases (besides the faulty tabs) is the amazing amount of bulk they add to the device ... too much to warrant a purchase in my opinion. The otter box case looks sweet but I am concerned the demand has not prompted them to make a production run. If you're interested in the otter box case please sign up for it at the site so they know the demand is there.
Just got the email, the MT3GS Otterbox case is available: http://www.otterbox.com/HTC-myTouch...tch2-20101022&cid=emu-lch-htc4-mtch2-20101022
Yep, that is correct! It's available online.
http://www.otterbox.com/HTC-myTouch...tch2-20101022&cid=emu-lch-htc4-mtch2-20101022
Update
Enter coupon code "tb1010y" upon checkout for 10% off
colors
But it only comes in black! That's fine for y'all with white or black phones, but I love my red one. Oh sure, some of the color would show as trim, but.....
That's not really an issue. How hard is it to remove and replace?
Looking forward to a review when someone gets one.
So who's going to be the guinea pig? I'm extremely disappointed with the Body Glove case tabs. After a couple months, I'm down to one tab, lol.
tahbasco said:
So who's going to be the guinea pig? I'm extremely disappointed with the Body Glove case tabs. After a couple months, I'm down to one tab, lol.
Click to expand...
Click to collapse
That's a downer I just ordered one from Amazon, but the bonus was it was only 12 bucks, and of course I got the e-mail from Otterbox about 10 hours after I placed the order that it was now available.
Sent from my Rooted myTouch 3G Slide using the XDA App
Sorry archie. You might have better luck than I did. It would've held up better if I didn't have to pull the battery a couple times. It's a solid case though. I'm still rocking it with 1 tab.
I am hoping there are some people here who know about what brands/sites are good ones or trustworthy.
Ok, picking up my Evo 3D on Friday..... and surprise surprise, the phone isn't even out yet, yet there are a million different places with brands nobody has ever heard of with supposed cases for this phone, some of them even having dimensions smaller than the phone itself despite being listed as for the 3D.... (Yes I know, no need to tell me many manufacturers will take existing stock and claim it works for the new device just to sell it).
So the thing is, I have no idea what cases might be designed specifically for the HTC Evo 3D, or even any respectable sites to buy such cases from.
But I am also sorta over-complicating the issue by not being sure if I should first over a back cover for the phone or not. See, I am not a fan of the way the camerapod sticks out, I was wondering if there were any GOOD cases that add enough bulk to essentially make the cameras level with the rest of the phone, even if this will add thickness.
Something like this, but I don't know if this really is an official HTC product or not, and if there aren't better ones (or if that is a trustworthy site):
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28040
And this brings me to my main concern. The main case I want to get is a belt-clip holster, not just a simple little clip that attaches the phone to your belt but basically a whole pouch to hold it, something like this:
http://www.amazon.com/Black-Horizontal-Leather-Magnetic-Closing/dp/B0051IGCAI
But on top of the problem I already mentioned of there being a million cases just simply calling themselves a HTC Evo 3D case... there is also the issue of how it will fit. Normally, I don't care if a case is a little too big for a phone since it will hold it anyway, but all of my previous phones didn't have sensitive parts like the camera sticking out so much before, if I were to get a case, id want one designed to hold the pushed-out camera in place too.... but that would only work if I decide not to get a case that ads bulk for the purpose of keeping the cameras flush with the back of the phone.... and if I do decide to go with a back-cover to add bulk, will those pouch-cases then even still hold the phone or will it then be too thick?
Sigh... I'm over-complicating things aren't I? So anyway, any ideas? Its a shame those back-covers that increase the size of the phone can't make use of that size, such as storing a slightly higher capacity battery or something.
That first one's badass. I wonder how much coverage you get on the front. I ordered two slide together ones (like the innocase surface, but a clone), and one super-silicone one. I like buying a bunch of different colored cases to shake things up every now and then.
ey
retnuh730 said:
That first one's badass. I wonder how much coverage you get on the front. I ordered two slide together ones (like the innocase surface, but a clone), and one super-silicone one. I like buying a bunch of different colored cases to shake things up every now and then.
Click to expand...
Click to collapse
post some links so we can see what they look like plz i still need case
http://www.amazon.com/gp/product/B0053NWDO0
This is the silicone one. Cheap and highly rated for other phones.
http://www.amazon.com/gp/product/B0052TTMXA
This is the snap together (innocase surface-esque) one. Might be sold out now.
where is the case with the kickstand?
I went yesterday to a sprint store and got me a otterbox commuter case. I love it. They had about 4 different kinds but none with a kickstand. They also had the car dock as well.
TPU case for me. Ordered a few weeks ago from ebay, $4 shipped.
picked up a chase from BB this morning belt clip
case 20
screen protector was free
Are there images of any of these cases?
Cyber Akuma said:
Are there images of any of these cases?
Click to expand...
Click to collapse
case i have
http://www.bestbuy.com/site/olspage...d=1218353393109&viewtype=largeFrontView&h=387
but with out the kickstand
Picked up a Body Glove hard case when I picked my 3vo up this morning. Doesnt add too much bulk
Sent from my PG86100 using XDA Premium App
I got the case that Best Buy sells with a kick stand. It's 2-piece, kickstand, soft-touch, protects well. Very streamline. It costs too much ($40.00) but I had some reward points and ended up getting it for free. Love it!
Hmph, just terrific. To complicate matters, that hardshell case I posted isn't even available until July 13 apparently.... and nobody is showing that it looks like from the front...
I guess I should just at the minimum get a belt-clip pouch for now. Does anyone know of any good horizontal ones that were specifically designed for the Evo 3D instead of just general cases that roughly fit a phone of that shape?
I just thought I may as well post a little review on this case. I bought this case at the same AT&T Corp store that I bought my SGS II on Sunday.
This case has a very high quality feel to it. The fitment was incredibly tight though. This is likely because it is designed to fit both the international and AT&T SGS II devices. This should be obvious if you look at the fourth pic. It clearly shows openings for both the international and AT&T NC mic positions.
I have to be honest, I only chose this case because the Case-Mate and Ballistic options were far too bulky for my taste. This case provides enough protection, for me anyway, without adding too much bulk. I really wasn't too keen on the leather insert at first either.
In the last few days of use, I have come to really like this case. I even appreciate the leather insert. It provides a high-end feel to the case and provides for outstanding grip. The front lip barely covers the chrome bezel. I actually had to work the case to get it to completely wrap around the front of the device. The end result is a case that looks and feels like part of the phone.
At this point, I can say I highly recommend this case for anyone who doesn't need a bulky case (although they provide more protection), and who also wants something more than just a gel cover.
naplesbill said:
I just thought I may as well post a little review on this case. I bought this case at the same AT&T Corp store that I bought my SGS II on Sunday.
This case has a very high quality feel to it. The fitment was incredibly tight though. This is likely because it is designed to fit both the international and AT&T SGS II devices. This should be obvious if you look at the fourth pic. It clearly shows openings for both the international and AT&T NC mic positions.
I have to be honest, I only chose this case because the Case-Mate and Ballistic options were far too bulky for my taste. This case provides enough protection, for me anyway, without adding too much bulk. I really wasn't too keen on the leather insert at first either.
In the last few days of use, I have come to really like this case. I even appreciate the leather insert. It provides a high-end feel to the case and provides for outstanding grip. The front lip barely covers the chrome bezel. I actually had to work the case to get it to completely wrap around the front of the device. The end result is a case that looks and feels like part of the phone.
At this point, I can say I highly recommend this case for anyone who doesn't need a bulky case (although they provide more protection), and who also wants something more than just a gel cover.
Click to expand...
Click to collapse
Thanks for this review! I am looking for something less bulky than the case-mate. I'll have to check this out when I stop in my local ATT store. How much they selling them for?
I believe it was the usual rip-off price of $35. However, they give me 20% off on accessories at this store (frequent shopper there LOL). I am sure there are better deals, but I did not want to take a chance of messing up my phone before finding a case elsewhere. I paid full retail price so a few extra bones wasn't that big of a deal.
I was planning to return it, but I can't find anything similar online. If I find it online cheaper, I will buy it and return this one for sure. Either way, I am happy enough as it is.
I just bought this case today. I love it! Its like a mix between a hard case and tpu. If you had the bodyglove case on your captivate, you'll love this case. I like the look of the leather back, as I think it adds some class. This case doesn't add that much bulk either.
That was my first choice but the store rep couldn't get it to fit properly so I went with the ballistic even In this case the phone feels tiny in my Herman Munster hands after the infuse in a ballistic case I love this phone just gotta adjust to it
Sent from my SAMSUNG-SGH-I777 using xda premium
I also got this case. I like it a lot, it keeps the same of the phone without adding much bulk at all!
I got this case for my AT&T Galaxy S2 on launch day and I LOVE it. The Ballistics were just ridiculous. As far as getting the case on goes, I couldn't get it to fit at first but if you put it in bottom only, completely lip it; then top, completely lip it; then work the sides, it will always fit perfectly. Sometimes I feel like Gollum caressing my precious Ring with this baby.
Picked up this case today and absolutely love it. It doesn't add much weight to the phone and i feel it still keeps it slimness. As far as fitment goes. It does fit damn tight. I put it on the best I could at the store. I squeezed the sides to get the lip to go over but never could get the bottom corners to cover properly. Once I got home, I took it back out, then put it back on in reverse. This did the trick and it went on a lot easier.
I'm probably going to end up buying this case ASAP... I was interested in it for a while, but was afraid that it may have been too bulky.
Thanks for the feedback guys!
Sent from my SAMSUNG-SGH-I777 using xda premium
I just picked this case up from the AT&T store today. I have to say, it isn't a bad case but it adds a little bulk to the phone. I have another case coming in from Amazon tomorrow so we will see which one is better. I am not really a fan of the buttons being covered though since it makes it a little harder to press. I can already tell that this case will offer a lot of protection to any standard drop.
This is a great case!! been having it since Monday.
One thing to note is that if you are getting a discount on your cell phone plan you should also get that same discount on any accessories that you buy from AT&T.
I too chose this case with my purchase. it was the best of the lot,but I cannot keep this case. it just does not fit. I get 50% accessories on my plan. I went back to a store (not the one I got it from) thinking that they might have others. When I told the rep about the fit she said they are having returns for the same reasons. Found one that seem better on ebay waiting for it to come in. In the mean time I will kee this case to protect my baby, but will return within 30 days.
On another note anyone got the ivisor AG screen protector? not sure i am liking it. It seem to make my screen dim because of the non-glare, cant seem to find any good one on the net, they all seem to be for the international version. things are new so I will wait a bit.
Coldheat1906 said:
This is a great case!! been having it since Monday.
One thing to note is that if you are getting a discount on your cell phone plan you should also get that same discount on any accessories that you buy from AT&T.
Click to expand...
Click to collapse
I am on a corporate account through my employer and get 15% off. I asked them about that discount on accessories and they said that it only applies to service plans. I guess I will be returning the case today after work...
jiannichan said:
I just picked this case up from the AT&T store today. I have to say, it isn't a bad case but it adds a little bulk to the phone. I have another case coming in from Amazon tomorrow so we will see which one is better. I am not really a fan of the buttons being covered though since it makes it a little harder to press. I can already tell that this case will offer a lot of protection to any standard drop.
Click to expand...
Click to collapse
What soft cases don't cover the buttons? If they didn't cover them, you wouldn't be able to reach them.
Bigdog1 said:
I too chose this case with my purchase. it was the best of the lot,but I cannot keep this case. it just does not fit. I get 50% accessories on my plan. I went back to a store (not the one I got it from) thinking that they might have others. When I told the rep about the fit she said they are having returns for the same reasons. Found one that seem better on ebay waiting for it to come in. In the mean time I will kee this case to protect my baby, but will return within 30 days.
Click to expand...
Click to collapse
What problems are you having with fitment? While it does take a little bit to get it on right, it should still fit. I had problems with the bottom corners until I took it out then put in back on, starting on the opposite end.
axis01 said:
What soft cases don't cover the buttons? If they didn't cover them, you wouldn't be able to reach them.
Click to expand...
Click to collapse
The one I ordered and received from Amazon covers only the volume u/d buttons and has a cutout for the sleep/power button. I can press the power button just fine. I like this case better than the AGF from AT&T. It doesn't add a lot of bulk to the phone and was almost 1/3 the price so I will return it after work.
http://www.amazon.com/gp/product/B005P13O8E
I would love a case like this but the wife has the same phone as me. Does anyone know if it comes i white? Or am able to order a different color online?
Sent from my SAMSUNG-SGH-I777 using Tapatalk
jiannichan said:
The one I ordered and received from Amazon covers only the volume u/d buttons and has a cutout for the sleep/power button. I can press the power button just fine. I like this case better than the AGF from AT&T. It doesn't add a lot of bulk to the phone and was almost 1/3 the price so I will return it after work.
http://www.amazon.com/gp/product/B005P13O8E
Click to expand...
Click to collapse
That one doesn't look bad. I see they made a large cut out where the power button goes. Don't really care for that big cutout but to each his own. Mine has actually become a lot easier over the last day or so. I guess the compound loosens up over time.
Just got my GS2 today and bought this case at the same time. I wanted something sleek after a Ballistic case on my Infuse and this seemed perfect.
As others have stated it's a tight fit. The sales rep couldn't get it on completely so I had to play with it myself. Another post stated putting bottom and top on first. I had better luck with the sides first. Maybe it is just loosening up after trying 2-3 times to get it on.
The volume and power buttons being covered are going to take getting used to as it takes a good press to work them.
To sum up, love the case so far. Seems to be good quality and good protection.
I tried this case on yesterday and did not like the fit. The ATT store only had one so I am going to try a few more to see if they fit better. It was tight and I couldn't keep the lip over the edges all the way around no matter how hard I tried.
awtryau89 said:
I tried this case on yesterday and did not like the fit. The ATT store only had one so I am going to try a few more to see if they fit better. It was tight and I couldn't keep the lip over the edges all the way around no matter how hard I tried.
Click to expand...
Click to collapse
I had to keep pressing in around the sides to get it to fit perfectly. It took an hour or so to settle in.
Sent from my SAMSUNG-SGH-I777 using xda premium
Has anyone found a holster or holster combo for the note i have the white one?
I haven't. I'm waiting for Seidio's release. Just have to settle for something else for now for protection.
I am also waiting for seidio..hope they release a surface/innocase/holster combo like the active case they have on the site.
http://forum.xda-developers.com/showthread.php?t=1497252
Used one of these for the last 4 1/2 years, they build them with gun holster leather and clips. Indestructable.
I'm definitely thinking something else besides a case because when spring time hits and I dont have my coat pockets to carry this in its going to look and feel a little uncomfortable in pants/shorts pockets. But a holster, to me, may not be the safest thing for a device this size besides looking like the biggest geek . I'm thinking something more along the lines of a belt pouch, or man purse or something. Obviously I dont care what I look like carrying this just want to be comfortable and be safe for the device.
maydre said:
Has anyone found a holster or holster combo for the note i have the white one?
Click to expand...
Click to collapse
Go to www.ebay.com and search for Easecase
Eascase is a company, in China, that makes custom cases for a lot of different phones including the Streak and Note. I have one for my Streak, and a new one is in the mail right now for my Note. These are Custom Made cases! You get to choose the type and color of leather both inside and out as well as the closure type and Belt Clip or Loop !! My Streak case has a clip that while very nice and strong still has a tendency to pop off of my belt at times. I must have dropped the Streak at least 20 times Without ANY Damage!!!! My new case, for my Note, I ordered with a belt LOOP so that it will Never fall off again They have both horizontal and vertical cases; and the prices start at $50 and go up from there. Both my cases were $50. Very worth the price for the Incredible Quality IMHO !
Another place you might investigate is netimes dot com. Since I'm a new member I can't post you links but I ordered the hanging waist case for the note.
And at just over 10 bucks including shipping seems totally worth it. Like a lot of these places, you order from Hong Kong or China and have to wait a long time for them to show up. I ordered last Monday and still waiting for mine but it hit the US on Saturday so I imagine it will show up this week and I can give my full impressions then, but I just couldn't see spending 50+ bucks on something like this so thought I would mention this site which seems to have a bunch of Note related stuff really cheap.
Just an update on my holster. I received mine today from netimes and was very impressed. The leather (probably faux) feels high quality with nice straight stitching and the the belt clip is VERY solid. It is almost too hard to get on and off my belt, but I guess that's a good thing. The Note fits perfectly inside. The only thing I'm disappointed about is that it has magnets inside to keep the flap of it down. I got this one because I didn't think it had any magnets inside it just a big flap to keep the Note safely inside, but unfortunately it does have magnets. I guess time will tell if the Note gets ruined by it or not, but for $10.84 including shipping I'm very impressed. So, only complaints, had to use PayPal, took 10 days to get here, and had has magnents in the case. Your mileage may vary.
anyone know if they are any good? im looking to order a case with a holster and they seem to have a pretty good price on htcpedia and eBay. can't find anything, reviews and such, on them though
All I can tell you is the place where they make them is not far from where I live in the greater Baltimore area. Was thinking about getting it to try it out. I have only seen Radio Shack with the brand and they only have the model for the HTC Evo 4G 3D. They do not know if they are getting that accessory for the 4G LTE.
I went ahead and ordered it today. My phone is being shipped Monday by Sprint and I am not taking any chances with getting my accessories locally from any retail outlet on launch day.
Just want to activate my phone and put it in a temporary case for now. Will get a permanent case later.
There's a Youtube review of it if you just look up:
HTC EVO 4G LTE Dura-Gel Waffle TPU Case
Looked pretty good to me and it's already available, so I went ahead and bought it.
I ordered the case/holster combo, too. I hope I like it. It looks rather bulky but also like it will protect the phone very well. The good thing is that htcpedia seems to have a great return policy, if necessary.
Just wanted to post back and say I got one of these (since tpu-cases.com was quite ready with theirs) and it looks great..... Just a weeeeee bit lonely without a device to go inside of it.
<<I too, am a victim of Apple patent #5,946,647>>
Sent from my PG86100 using xda premium app
Case and holster: http://www.youtube.com/watch?v=1BZ7zS0n-2w
TPU case only: http://www.youtube.com/watch?v=n9806oi5yoQ
That holster looks very unsecure. I looks like it is only being held on the top and bottom. Very little security from the sides.
I received the Ventev case and holster today. It's too bulky for me, so I'm sending it back. Of course, without the phone I can't attest to the fit and quality, but it looks like it's pretty well built. It's just not my preference. I guess by the time the phone gets here, I should have found the perfect case. Going to give the Body Glove Tactic Case next; I like the look of it. I have a decent temporary case until I find a great permanent one.