HI
I have a goclever R75 RK29 tablet which i have flashed a few times with custom roms and had no problem until now
i flashed this rom
RK2918 Tab Odys-Loox rocks with Jelly Bean !
Oma JB v1.2.2 for evaluation
but the first boot got stuck and i could install fix from sd-card and am stuck my pc see the tab as a universal serial bus only if i keep the rest button in or it doesnt see it at all and it wont take the rockchip drivers or adb driver
i cant get into recovery and tablet wont switch off with usb plugged in
can anybody help please
i have removed the battery and still nothing
Related
Here is my complete problem,
My device is Micromax a110(canvas 2) (AKA Cynus t2 or Qmobile a10) (The board is s9081).
I was in CWM and i flashed the galaxy custom rom(meant for my device) it worked nicely after due to some reasons i rebooted it on factory mode after that the device went to bootloop, the bootscreen shows and then restarts infinitely , so i decided to reflash the stock rom (Stock recovery) so that i removed the battery and connected the phone via usb, now my phone detected as MT65xx preloader and in a second it disappers instantly. i tried testpoint too it doest works ,it is not the driver problem since the device needs to be detected and stay detected for that long to install the drivers(and i do have the drivers), is there any solutions for that? any help is appreciated, thanks in advance.
i update my tablet with a liquid rom using default android recoverymode. the installation was succesful but when i reboot my tablet, logo appears as usual and get stack in blackscreen. i could still enter android recovery mode but it only reads internal storage so i cant update anymore, usb debugging was not turned on. how could i get it back to life/unbrick my tablet. (it is not rooted anyway.)
so i tried livesuit v1.09 and connect my tablet while in recovery mode, (the computer detects it as softwiner761) still livesuit doesnt start even if i already selected an img file. system upgrade says "no available device". then i just nomally boot my tab and the computer detects it as an unspecified android, still livesuit doesnt start any progress. turned off tablet doesnt do anything so what should i do?
from wintouch site ive downloaded the the img and downloaded the latest livesuit.
fastboot devices doesnt work too. i have no more idea how could i unbrick this tablet. please help me how could i repair this.:crying:
please help me :crying: :crying: :crying:
Hi
My toshiba AT7-a tab is bricked. I tried to flash it with a custom rom. (But the ROM was not for the model) I used "RKBatchtool" and "AndroidTools" for for the task. Now my tab is not booting or nothing on display. When I plug the tab in to my PC
Android tools show "One Loader device found" - in recovery mode (Vol+ and Power on)
"One mask device found" in Power on mode (Power on)
I think it is possible to upload a new ROM with "AndroidTools" to the device.
Device Detail:
Toshiba AT7-a
It came with Android 4.2.2 Jelly Bean operating system.
RK3188 1.6GHz processor with ARM Mali-400 GPU
7 inch display with 1,024 x 600 pixels of screen resolution
Please anyone can help me?
Does anyone have Toshiba AT7-a original / custom/ compatible Rom?
or any other ways to fix my tab?
PLEASE Help me!!!
I recently rooted my tablet,using kingoroot.I messed up and now my tablet is stuck on the manufacturer logo...If I try to connect it to a pc,it does not recognize it.It is a chinese turbo-x rubik ii tablet,which has an allwinner 33 processor and android 4.4.2.I can't enter recovery because it stucks on the logo and minimal adb and fastboot doesnt recognize it...It would be amazing if someone could help me,as I need the tablet for studying.
Hi everyone!
I have an Onda V701s tablet that runs on the Allwinner A31s SOC. Specifications of this tablet can be found here: https://www.imei.info/phonedatabase/onda-v701s/
While trying to root the tablet with ADB commands, I bricked the device. When powering on the device, it is stuck on the Onda boot logo. This boot logo shows the brand logo with the text "SINCE 1989" underneath it. The device does not boot any further, no matter how long I wait.
I've tried to connect the tablet to my Windows 11 (64-bit) laptop in a special download mode using the following steps:
Power off the tablet
Press and hold volume button
Connect USB cable from the tablet to the laptop
Press the power button up to 10 times until the tablet is recognized by the laptop
These steps indeed result in a different connection between my laptop and the tablet, but I am still unable to flash the stock firmware. To do this, I've tried LiveSuit and PhoenixSuit, but both pieces of software do not recognize the tablet (no device connected).
Does anyone here have experience with flashing bricked Allwinner chipset devices?
If more information is needed to solve this issue, please let me know
yo ask this guy on fivver he knows everything https://www.fiverr.com/mateenqamar564?source=inbox