Hi
I flashed the phone with invalid firmware using SP_Flash_Tool.
Now SP_Flash_Tool and Windows doesn't see the MT65xx Preloader USB device after disconnecting/reconnecting the battery.
The phone doesn't switch on.
Is possible to recover a preloader on MTK6577 (Zopo ZP 900) using the flex cables or other methods?
Thank you
I have same situation. Did you find any solution for this?
Hi all,
I accidentlly wipe preloader on my Lenovo P770 and computer identify it as "alcatel single rndis interface #2". Is there any possibility to restore preloader in my phone or it is comlete brick?
I would be very thankful for any help.
Lenovo P770 preloader wiped
my preloader accidentally wiped by my son, now my prealoder appears as ALCATEL.
I can't turn on my phone. Any ideas what to do?
when i install MTK Preloader / Usb driver, when i put the phone and usb on the computer it will disconnect after a few seconds, and connect and disconnects again.
The problem also appearing when i am flashing the phone with FLASHTOOL. That's why i am not able to flash my phone...
Kindly please help me out...
Any idea to help me regarding this problem would be a great help...
Thanks in advance...
Hi there...I am also facing the same problem in my mtk device...I could flash the stock rom from SP flashtool...but after flashing my phone is in dead state...Any Leads..???
I got to the same problem with my phone. There is no chance to turn it on.
Someone has got a suggestion?
Same problem.
We hope that one hero appears here
i will pay for the solution!
MTK6577 Tablet
Hey guys .. any solution ?
Lenovo A2107A-H, Dual SIM dead after SP-Flash
I stand in a row with you all, I also have killed my tablet with SP-Flash, It appears as Alcatel Single RNDIS Interface in Win7 control panel's network adaptors and in Win8.1 as "unknown device". I already uninstalled the drivers, the Win7 needed to reboot after that, but re-installed the same sh** after reconnecting. I have heard about another tool, not SP-Flash, which shall be able to "find" the tablet on the USB bus, but I don't remember the name.
How to un-brick Lenovo P770!
lystor said:
Hi
I flashed the phone with invalid firmware using SP_Flash_Tool.
Now SP_Flash_Tool and Windows doesn't see the MT65xx Preloader USB device after disconnecting/reconnecting the battery.
The phone doesn't switch on.
Is possible to recover a preloader on MTK6577 (Zopo ZP 900) using the flex cables or other methods?
Thank you
Click to expand...
Click to collapse
I un-bricked my Lenovo P770 yesterday!
How to do this:
1) Download and install "MT6577 USB VCOM drivers" -drivers for your phone
2) Open Device manager in your computer. Then "View" and "Show hidden devices" (do not close Device manager)
3) connect your phone to PC by USB cable (without battery, some phone with battery)
4) In device manager, in Network adapter (in my situation, after few second) shows "Alcatel single rndis interface #. . ." - it can appears and disappears!
5) When "Alcatel single rndis interface #. . ." appears click on this device Update drivers->Browse my computer...->Let me pick.. and here you should see "Mt65xx Preloader" if not you should find your driver.
6) When you update this driver you could use Flashtool v3->loading scatter file (you can find your android on needrom website. for example: P770_ROW_S110_130204_707WOW) -> check only PRELOADER and click Download
then connect your phone again to USB (without or with battery) and wait some seconds.
GoodLuck!!!
You can control on needrom website
I have the same issue. mediatek S8 - mt6577 7inch tab
Hi Masters,
I just like to inquire if I can still unbrick my clone Note phone. It has same spec as the HDC 5.7 Lord N9588 same box with NeoI brand. The main reason I flashed the ROM is because the accelerometer and GPS is not working so I found this ROM in needrom.com under HDC Lord N9588. as instruction says do not change anything in the setting (includes preloader). It successfully flashed the ROM but after reboot, the display is messed up and showing different color vertical lines. same as in the recovery. I believe that the phone still boots up, only the display messd up as I still can hear a sound every time I press the button and the screen and can hear volume sound when pressed. I still have the original ROM but the problem is it does not connect to SP flash. Last time when I connect to SP flash I can see MTK PReload VCOM USB when connected, now I can only see Preloader VCOM USB and gives errorS_COM PORT OPEN FAIL ERROR (1013) .already tried reinstall usb drivers.I can still access the phone trough adb shell but could not flash using fastboot at it says device not detected.
Thanks for any advice in advance.
Regards,
Ferdie
I was flashing image to my android via fastboot. During the process i was flashing stock rom system image. On the middle of writing system image the process stuck so i pulled the battery and again tried but then my android starts on powering up so that vibrates continously with no Display. I tried recovery mod and fastboot mode keys combination but the same vibration thing occurs. Even i plug my phone into charger the same problem persists. Please HeLP me
I can't flash anything because i cant open on android fastboot or via adb. after connecting the phone via usb phone starts to vibrate continously and the driver that windows detect is sprd com enumerator driver.
Qmobile A4
1Ghz
256mb ram
512mb ram
In India it's micromax A35.
Ayow nigga .
The problem started when my system updates, after I click upgrade I've experience some effin errors . Then my Gionee m3 started to malfunction .
Help me this effin loop is so irritated . I already tried to flash stock rom , SP Flash, and I also download mediatek and some usb drivers . I think my main problem is SP flash tool cant recognize my device it wont charge either . Help me do you have some solution ?
i have the same problem my gionee m3.... i dont know other method to usb debuging my phone because it is only showing of android system recovery 3e when i use adb devices it not recognize it only shown as 0123456789abcdef sideload... in my searching it will change if i usb debugging enable... also sptools work on usb debugging i think
I have the same problem. I have installed two different sp flash tools, installed ADB drivers. my PC detects my phone and charging but having the option to open my files. I tried SP flash tools but wont detect my phone and will just charge.
PLease help.
Hi all,
I have a similar problem of bootloop after installing cm13 and gapps, it keeps rebooting back to twrp recovery. pls help.
Hi, I was asked to post my help-request in this board
http://forum.xda-developers.com/general/xda-assist/phone-totally-bricked-t3248796
So, my phone is hard-bricked (doesn't boot at all) and it's no longer responding when connecting it via usb cable. I was about to flash it but couldn't complete the operation, now everything is deleted including the operation system (the ROM), the recovery mode, the preloader etc....
So what to do?
my phone is versus pioneer p1 ( a.k.a gionee pioneer p1)
Thanks.