Hello please help i have a big problem on my NEO N003 1/4g T13
I have flashed to newest Stock room from the website neo then i try magerto room he was fine as the beginning then after 2 days he start freezing and sometimes working then the camera is no longer working i tell my self its just poor room
i decide to use the stock room but after i flashed work normal for 10 minute then freeze the screen turn black utile you remove the battery and put back in 2 minutes
after many times trying to flash it by sp flash tool i hit format ...my imei is gone and no signal on the sim card ( thats not a big problem)
but the phone still freezing and restarting ...black screen ......
after that the phone not able to turn on even the logo just black you can see he is trying turn on but no logo no nothing
in the device manager detect MediaTek Usb port before was detect preloader MediaTek somthing ......
look at the picture and the sp tool not working MediaTek Usb port and i got this error (look at the picture)
please help me i use the phone only 1 month please help me
this Morning accidentally i put the phone into Preloader Mode and make normal flash and my phone is a live a was very Happy i went to write the imei must root the phone...i have install root programe name is geno (he is work fine on lenovo P780) but in neo N003 he just freeze and tun off and no longer can trun it on again just black screen.
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???
Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
Guys please Help me .
Please Help Help !!!!!
Help me For God Sake I am going Crazy !!!!!
benladen said:
Hello please help i have a big problem on my NEO N003 1/4g T13
I have flashed to newest Stock room from the website neo then i try magerto room he was fine as the beginning then after 2 days he start freezing and sometimes working then the camera is no longer working i tell my self its just poor room
i decide to use the stock room but after i flashed work normal for 10 minute then freeze the screen turn black utile you remove the battery and put back in 2 minutes
after many times trying to flash it by sp flash tool i hit format ...my imei is gone and no signal on the sim card ( thats not a big problem)
but the phone still freezing and restarting ...black screen ......
after that the phone not able to turn on even the logo just black you can see he is trying turn on but no logo no nothing
in the device manager detect MediaTek Usb port before was detect preloader MediaTek somthing ......
look at the picture and the sp tool not working MediaTek Usb port and i got this error (look at the picture)
please help me i use the phone only 1 month please help me
this Morning accidentally i put the phone into Preloader Mode and make normal flash and my phone is a live a was very Happy i went to write the imei must root the phone...i have install root programe name is geno (he is work fine on lenovo P780) but in neo N003 he just freeze and tun off and no longer can trun it on again just black screen.
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???
Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
Guys please Help me .
Click to expand...
Click to collapse
benladen said:
Help me For God Sake I am going Crazy !!!!!
Click to expand...
Click to collapse
Why no one try to Help me please
:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Up up up
help !!!!
benladen said:
Up up up
help !!!!
Click to expand...
Click to collapse
help
benladen said:
Now when i plug the phone via usb port windows detect it MediaTek USB Port how i can put it again in Mediatek Preloader VCOM ???
Always get error 4032 on sp flash tool (format , upgrade, download) all he same error
Guys please Help me .
Click to expand...
Click to collapse
On my phone, mine has the same chip as yours, to flash in preloader mode, I do it in this order,
1 connect phone to pc via usb with battery removed,
2 load flashtool with scatterfile and rom to flash,
3 click on download in flashtool,
4 put battery into phone
SPflashtool then searches for the preloader driver, loads it briefly and then loads the DA Usb Vcom port driver and then proceeds with flashing
This will only work if you have the usb vcom preloader drivers installed on your pc
To check if you have preloader driver installed, open device manager on your pc, connect your phone with usb cable and battery removed, put in battery while watching device manager, if driver is installed you should see 'Preloader Usb Vcom port' appear in the ports section,
but it will only be there for a few seconds, and will dissappear again. If you do not see this you need to install the Vcom driver.
Hope this helps
you help me a lot man !!!!!
oscarblue48 said:
On my phone, mine has the same chip as yours, to flash in preloader mode, I do it in this order,
1 connect phone to pc via usb with battery removed,
2 load flashtool with scatterfile and rom to flash,
3 click on download in flashtool,
4 put battery into phone
SPflashtool then searches for the preloader driver, loads it briefly and then loads the DA Usb Vcom port driver and then proceeds with flashing
This will only work if you have the usb vcom preloader drivers installed on your pc
To check if you have preloader driver installed, open device manager on your pc, connect your phone with usb cable and battery removed, put in battery while watching device manager, if driver is installed you should see 'Preloader Usb Vcom port' appear in the ports section,
but it will only be there for a few seconds, and will dissappear again. If you do not see this you need to install the Vcom driver.
Hope this helps
Click to expand...
Click to collapse
Thank you so much man you help me a lot !!!
This how i get preloader
1-remove the battery
2-connect the phone to usb but before windows detect the device put the battery back
windows will detect preloder driver !!that's great
Now must go to my office i have windows 7 there to flash the phone with stock room and i will put the result later here
because i have win8.1 at home i get a lot of problem flashing this phone on it .
thank's again Peace.
oscarblue48 said:
On my phone, mine has the same chip as yours, to flash in preloader mode, I do it in this order,
1 connect phone to pc via usb with battery removed,
2 load flashtool with scatterfile and rom to flash,
3 click on download in flashtool,
4 put battery into phone
SPflashtool then searches for the preloader driver, loads it briefly and then loads the DA Usb Vcom port driver and then proceeds with flashing
This will only work if you have the usb vcom preloader drivers installed on your pc
To check if you have preloader driver installed, open device manager on your pc, connect your phone with usb cable and battery removed, put in battery while watching device manager, if driver is installed you should see 'Preloader Usb Vcom port' appear in the ports section,
but it will only be there for a few seconds, and will dissappear again. If you do not see this you need to install the Vcom driver.
Hope this helps
Click to expand...
Click to collapse
Hello, I can't Flash the phone over the preloder i have try 2 pcs and 2 diffrent drivers no luck the sp tool give me errors 4010... 2020
after trying many times i got flashed over the mediatek usb port ....
then the usb disconnect and the MediaTek DA USB VCOM connect and the flash begin utill 100%
but the phone not starting just black screen
try to format , upgrade , download nothing try 23 stock roms the old and the new nothing
please help help !!!
Do you see the preloader driver in device manager when you connect your phone as I described above?
Which build of SPflashtool are you using? the tool is quite buggy and sometimes helps to try another version
oscarblue48 said:
Do you see the preloader driver in device manager when you connect your phone as I described above?
Which build of SPflashtool are you using? the tool is quite buggy and sometimes helps to try another version
Click to expand...
Click to collapse
I don't see preloader driver i see just mediatek usb port
I am using SP Flash Tool v3.1328.0.183 and other versions
Now the flash not working again stop at the red bar 100% and give error 4032
i am sick with that error
i read some people get they phones alive with an loading an other preloader and the flash get throw !!!
look at this
thank you for responding man.
any One what i can do now ??!!!
Help for god sake !!
Ok, i think the only way your going to unbrick your phone is to flash the exact correct rom for it, Do you have a copy of the stock rom for your phone suitable for SPflashtool?
The link that you show is for a Feiteng H9500, that is very unlikely that it will work on your phone, the reason your phone is bricked is because you have probably flashed the wrong preloader block, and that is whats causing the trouble, you need to make sure you have the correct rom for your device before you start.
I think the only time you had a little success is when you accidentally entered preloader mode and if it were my phone I would concentrate on getting the preloader driver installed. There are some tutorials on here to install the drivers, it can be a bit tricky, and not all mediatek devices are the same, so a bit of trial and error may be needed
Once you have the Preloader usb vcom drivers installed I would then attempt to flash just the preloader and dsp_bl blocks initially from the correct rom for your phone, and then if successful flash the remainder of the rom, without preloader and dsp_bl
If you flash the wrong preloader/dsp_bl you will almost certainly brick your phone, so it must be either from a backup you have made of your original rom or from the exact stock rom for your phone.
oscarblue48 said:
Ok, i think the only way your going to unbrick your phone is to flash the exact correct rom for it, Do you have a copy of the stock rom for your phone suitable for SPflashtool?
The link that you show is for a Feiteng H9500, that is very unlikely that it will work on your phone, the reason your phone is bricked is because you have probably flashed the wrong preloader block, and that is whats causing the trouble, you need to make sure you have the correct rom for your device before you start.
I think the only time you had a little success is when you accidentally entered preloader mode and if it were my phone I would concentrate on getting the preloader driver installed. There are some tutorials on here to install the drivers, it can be a bit tricky, and not all mediatek devices are the same, so a bit of trial and error may be needed
Once you have the Preloader usb vcom drivers installed I would then attempt to flash just the preloader and dsp_bl blocks initially from the correct rom for your phone, and then if successful flash the remainder of the rom, without preloader and dsp_bl
If you flash the wrong preloader/dsp_bl you will almost certainly brick your phone, so it must be either from a backup you have made of your original rom or from the exact stock rom for your phone.
Click to expand...
Click to collapse
Thank you for you respond ,
i have Preloader usb vcom inslalled on my PC i have 3x stock roms from the NEO website all does not working always red bar 100% and get error 4032 on SP flash tool
Do you want to say that i will contact someone have the same model of my phone and tell him to make backup to his phone and upload it for me ? is it right ?
i have lenovo P780 when i turn it off and plug it to usb he detect it preloader mediatek then Disappears , thats what the NEO N003 must be :crying:
any way if some one have a rom work with my phone plz upload it for me
thank you again peace.
benladen said:
Thank you for you respond ,
i have Preloader usb vcom inslalled on my PC i have 3x stock roms from the NEO website all does not working always red bar 100% and get error 4032 on SP flash tool
Do you want to say that i will contact someone have the same model of my phone and tell him to make backup to his phone and upload it for me ? is it right ?
i have lenovo P780 when i turn it off and plug it to usb he detect it preloader mediatek then Disappears , thats what the NEO N003 must be :crying:
any way if some one have a rom work with my phone plz upload it for me
thank you again peace.
Click to expand...
Click to collapse
So the preloader vcom driver is installed ok on your pc, but you do not see it when you connect your phone, maybe you need to connect in a different way, on my phone I have to connect switched off phone with the battery removed, and when the battery is put in, then you see preloader driver pop up in device manager, there are many different MTK phones and different ways to connect.
The stock rom you have should be fine as long as it is the correct one for your device.
oscarblue48 said:
So the preloader vcom driver is installed ok on your pc, but you do not see it when you connect your phone, maybe you need to connect in a different way, on my phone I have to connect switched off phone with the battery removed, and when the battery is put in, then you see preloader driver pop up in device manager, there are many different MTK phones and different ways to connect.
The stock ROM you have should be fine as long as it is the correct one for your device.
Click to expand...
Click to collapse
the phone does not start at all not logo no no nothing is just black screen i have try this before connect the device then put the battery on it when it connect it's work first time the preloader device show , but i can not flash the ROM with it the sp flash tool give me error
i was able the flash it with mediatek usb port but the phone does not start black screen
, now i can't enter to the preloader device or even flash it with mediatek usb port !!!!!
yes its correct ROM i flash the phone with it before ...i brick the phone by root it by software name GENO the phone just stop working
i have use all the combination button but not luck i am stuck at mediatek usb port and sp tool give me error 4032....
:crying::crying::crying:
benladen said:
the phone does not start at all not logo no no nothing is just black screen i have try this before connect the device then put the battery on it when it connect it's work first time the preloader device show , but i can not flash the ROM with it the sp flash tool give me error
i was able the flash it with mediatek usb port but the phone does not start black screen
, now i can't enter to the preloader device or even flash it with mediatek usb port !!!!!
yes its correct ROM i flash the phone with it before ...i brick the phone by root it by software name GENO the phone just stop working
i have use all the combination button but not luck i am stuck at mediatek usb port and sp tool give me error 4032....
:crying::crying::crying:
Click to expand...
Click to collapse
If your phone now is completely dead, probably your only hope of reviving it is by using the test point, see 'Modes of the virtual COM ports', here.....
http://forum.xda-developers.com/showpost.php?p=38369102&postcount=11
Ive never done this procedure, so cant help much with it, but if you search these threads for mediatek test point or similar, you might find some info on it
oscarblue48 said:
If your phone now is completely dead, probably your only hope of reviving it is by using the test point, see 'Modes of the virtual COM ports', here.....
http://forum.xda-developers.com/showpost.php?p=38369102&postcount=11
Ive never done this procedure, so cant help much with it, but if you search these threads for mediatek test point or similar, you might find some info on it
Click to expand...
Click to collapse
ok thank you i will see what i can do !!
oscarblue48 said:
If your phone now is completely dead, probably your only hope of reviving it is by using the test point, see 'Modes of the virtual COM ports', here.....
http://forum.xda-developers.com/showpost.php?p=38369102&postcount=11
Ive never done this procedure, so cant help much with it, but if you search these threads for mediatek test point or similar, you might find some info on it
Click to expand...
Click to collapse
Hello, man can you Help me to find Test point
look at the picture down here
thank you.
benladen said:
Hello, man can you Help me to find Test point
Click to expand...
Click to collapse
As I said, Ive never done this myself, only read about it and have no idea where the test point is on your phone, they all appear to be in different places, on an mt6577 I had previously it was easy to find, just by the sim slot, there was no need to even strip the phone down, but on most other models they all seem to be less accessible. It will be somewhere on the main board I would imagine, usually, but not always, a small round brass dot about 2mm accross, and I noticed while searching that some are marked 'KCOLO' or similar. I believe also from what I've read that the manufacturers use this method to input the factory rom, so it must be there somewhere, its just a question of locating it. The best method to find it apparently is by testing different points with a multimeter to find one that corresponds with your battery output.
some more info here... http://forum.xda-developers.com/showpost.php?p=32424838&postcount=616
and a link to rua1's russian thread on the subject, translation with google chrome is not very good but there are some pics throughout the thread that might be helpful.... http://forum.china-iphone.ru/test-pointi-dlya-proshivki-preloader-na-mt6573-75-77-t22559.html
Hello guys.
I have a problem with my phone. It's an Archos 40 Titanium (neither model c or model b).
I flashed recently the rom of Wiko Sunset which is a KitKat rom. I thought it would be fine as wiko sunset has really similar features to my phone. Before I flashed that rom, I made a backup with SP Flash tool.
The problem now is that I can't flash the backup back. I get always Error 4032: Enable_DRAM_Failed. I've tried different versions of SP Flash Tool and drivers (MTK USB and VCOM drivers). I've followed many "guides" that I found on different websites (eg. to flash the preloader of the stock rom without having the battery in the phone etc), but unfortunatelly I get still the same error.
It's maybe worth mentioning that if I connect the phone without the battery and by pusshing VOL+ and power buttons then it connects but after 4-5 seconds it disconnects. If I do the same with the battery on, then it doesn't disconnect.
I am running Windows 7 x64 and Linux through dual boot.
I would be greatful if you guys could help me.
If you need any more info, you can ask me.
Thank you in advance.
Update:
I solved it by myself. After some tries it "accepted" the format I was trying to do (with SP Flash Tool) . Now I am flashing back my backup..
how to
first download the right firmware for this phone
then open sp flash tool and open the scarter from firmware if the firmware is corect all the directions is on screen of sp flash tool.
now click the download buton
after 2 sec remove the batery from your phone and conect the usb cable
windows update find automatic the right drivers mtk 65xx preloader vcom and after 5 sec the drivers is ok.
sp tool now flashing the firmware and the yelow bar work .
when you see the check on green square ,work is finished.
now you can unplung the usb cable and open your device.
What if i ddnt get the stock rom...
My bootloader is gone..
And phone is dead..
Really in financial problem
ELUGA S STOCK ROM...
google drive links are showing
404 error
You can find the right rom for your device on needrom site and flash it again. Check the choice of download+format
Ok.
Hi guys, I recently purchased a Homtom HT3 for my mother, when it arrived to me I charged it and checked it out a bit just to make sure everything was fine which it was.
She collected it from me the next day and told me she'd start to use it the day after, she calls me up the next day and tells me there's some problems with it and a few people at her workplace tried to fix it for her to no avail. I pick the phone back up and I notice that everytime I power it on, it gets stuck on the "homtom" logo.
As I don't know too much about fixing phones I only took the following steps before asking for advice here; I went into recovery mode by holding up volume and power button, the android guy with the red triangle appeared so I tapped up + power button to get into the recovery(?) menu. I wiped the phone to factory settings and deleted the cache in there but it hasn't fixed the problem.
I assume I need to flash a firmware or something to potentially fix this, but I'm unable to find an official firmware from doogee/homtom's site for the HT3. I've found a firmware that I downloaded from "chinagadgetsreviews" but I'm a bit weary to try and flash with that rom because it isn't from the manufacturer. (even if I knew how to - the only experience I have is rooting my own phone but that's when I actually had access to a working phone, not one thats stuck on a boot logo).
Sorry for the long post but could anyone guide me in the right direction here? TIA
I'm not opposed to not using official firmware, I think I use cyanogen mod(?) on my own phone. I'd just like the problem fixed in the easiest way possible.
Trying to fix it myself by flashing a rom via SP flash tools but I've ran into another problem which is stopping any kind of progress - the phone isn't detected in Windows, I can't enable usb debugging because I can't get passed the boot loop, I've tried installing the ADB driver manually which didn't seem to work (just said it didn't install correctly and left me with a yellow exclamation mark) and I tried to install it automatically via ADB driver installer but it just throws up an error that the device isn't detected.
Any help would be greatly appreciated.
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Same here - any solution for this problem?
Kleos89 said:
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Click to expand...
Click to collapse
FLASHED 2.DUMP_ROM [SPFT][ROOTED] FROM All About CherryMobile Flare 4 AFTER IT SAYS FLASHING IS DONE 100% WITH CHECK MARK THEN MY PHONE DIDNT RESTART I WAITED FOR ABOUT 15 MINUTES TO SEE IF THERE'S SOMETHING MIGHT HAPPEN BUT NOTHING ONLY BLACK..
SO I PULLED THE USB CONNECTOR, THEN PLUG IT BACK. THE ONLY THING THAT I SAW IS UNRECOGNIZED USB. NO CHARGING LOGO OR ANDROID OR ANYTHING EVEN THE LED INDICATION OF CHARGING IS NOT BLINKING.
I HOPE SOMEONE CAN HELP ME :crying::crying::crying::crying::crying::crying::crying:
UP
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
AlexanderBabansky said:
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
Click to expand...
Click to collapse
thanks bro.
now it show dram fail (4032)
So I need to fix one of these and there's no zip or img of the ROM for it. There's a SP Flash tool backup but I can't use that because the device boots as soon as I connect it to my PC. I can only boot it into TWRP or fastboot mode. Is there a working ROM I can put on this? It really doesn't matter what, any ROM that can make it boot is fine.
You dont have correct drivers, if you have correct drivers the tablet WONT boot when plugged in for SPTools.
uninstall all your mtk drivers, all the vcom drivers, spflash tools...etc... reboot pc
I'm using spflashtools 5.1648.00: http://www.mediafire.com/file/qwgshp..._5.1648.00.rar dont run it yet.
I had to do THIS before I could do anything else, install the vcom drivers following this exactly: https://forum.xda-developers.com/ele...32-64-t3267033 reboot pc
Now, install this using the inbuilt installer: http://mtkusballdriver.com/download/mtk-usb-v1-0-1 and reboot pc once done.
NOW open sptools AS ADMIN, turn tablet off, open your sptools backup/rom in sptools, select FORMAT ALL AND DOWNLOAD from the drop down menu, press the green arrow download button and the 'stop' button will change colour.
plug the tablet to usb and the bottom bars on the flash tool should go red, then purple, then a slow yellow bar. Keep waiting until a box with a green circle pops up saying OK.
If it doesnt work, try another usb lead, try another port, if that doesnt work try a DIFFERENT sptools version, and another , and another... until you find one particular version that works with your particular tablet on your particular PC, it sounds so pointless but trust me from experience one that works for 99 people wont work for 1
9002a and 9002x
You can use a 9002x firmware for a 9002a it works great,
There are others as well, Use the sp slash tools to do it.
alcatel one touch pixi 3(7) 8055 firmware
can anyone please help me to this problem.. i try to fix my alcatel one touch pixi 3 7 by flashing the stock firmware but after flashing firmware using sp flash tool the error message pop up then flashing stop.. now my tablet wont open nor charging.. what should i do please help.
is there any custom rom for alcatel onetouch pixi 3 (7) 9002 tablet?