I was flashing image to my android via fastboot. During the process i was flashing stock rom system image. On the middle of writing system image the process stuck so i pulled the battery and again tried but then my android starts on powering up so that vibrates continously with no Display. I tried recovery mod and fastboot mode keys combination but the same vibration thing occurs. Even i plug my phone into charger the same problem persists. Please HeLP me
I can't flash anything because i cant open on android fastboot or via adb. after connecting the phone via usb phone starts to vibrate continously and the driver that windows detect is sprd com enumerator driver.
Qmobile A4
1Ghz
256mb ram
512mb ram
In India it's micromax A35.
Related
I was flashing image to my android via fastboot. During the process i was flashing stock rom system image. On the middle of writing system image the process stuck so i pulled the battery and again tried but then my android starts on powering up so that iibrates continously with no Display. I tried recovery mod and fastboot mode keys combination but the same vibration thing occurs. Even i plug my phone into charger the same problem persists. Please HeLP me
Could you tell us the model? Or at least the brand? That'll be a lot easier to debug.
Sent from my Nexus 4, want to know my current project? Check http://team-fun.eu
I am using Qmobile A4 bolt in pakistan. It's micromax a35 in india aswell
Help meeeeeeeeeeeeeeeeeee
I cant get into any mode....
Anyone here to help me? :-/
http://androidxda.com/download-micromax-stock-rom-models
This might help you. If you reflash your stock ROM it could be fixed.
Sent from my Nexus 4, want to know my current project? Check http://team-fun.eu
how can i flash because i cant flash via fastboot or via adb. after connecting the phone via usb phone starts to vibrate and the driver that windows detect is sprd com enumerator driver.
Here is my complete problem,
My device is Micromax a110(canvas 2) (AKA Cynus t2 or Qmobile a10) (The board is s9081).
I was in CWM and i flashed the galaxy custom rom(meant for my device) it worked nicely after due to some reasons i rebooted it on factory mode after that the device went to bootloop, the bootscreen shows and then restarts infinitely , so i decided to reflash the stock rom (Stock recovery) so that i removed the battery and connected the phone via usb, now my phone detected as MT65xx preloader and in a second it disappers instantly. i tried testpoint too it doest works ,it is not the driver problem since the device needs to be detected and stay detected for that long to install the drivers(and i do have the drivers), is there any solutions for that? any help is appreciated, thanks in advance.
Hi all, I have a Lenovo P780 4GB that I flashed successfully with SPFT, P780_S125_130529 ROM from needrom.com. from there the phone will not boot but I can see is a red led charging light glowing while connecting it to a computer or charger. The device is not getting recognized by VCOM drivers so no use with flash tool any more. the only thing I see from Device manager is Alcatel Single RNDIS Interface #2. when I plug the phone to the computer I can hear the device connected/disconnected sound, Tried to reboot in to recovery and meta mode but the phone simply does not turn on. Anyone knows how to fix this problem?
Is there any other way I can get the device to change modes or rather a way to get it to be recognized by the PC?
a solution to fix the device will be the best.
Thanx for the help
Hello,
During the past days I've been trying to flash my C7 with no success. When pressing power button, it turns on and displays the Alcatel logo but stays there, it does not load the OS.
I have tried to use SPtools to flash it, I have the mtk drivers installed in my PC. When I plug the switched-off phone to the computer it turns on and couple seconds after my PC detects it (I can see the preloader mtk loaded on the device manager); however, one second right after it is detected, it is disconnected as it keeps booting to show the logo and stay there. Obviously, if the phone is not detected I cannot use SPtools to flash it.
Any suggestion will be highly appreciated.
PS: I have also tried to connect to it with adb, and dump a ROM using sideload with no sucess, the PC recognizes it from the recovery but after copying the image nothing new happens on reboot.
Hello Members,
The device was stuck in boot loop so i tried to flash via EDL mode. First it came to edl mode but while flashing i got some XML error. Now i tried to put the phone again in EDL mode but its not working.
I had removed the battery and and i have connected to 2 jumper pins 1 and 4 and connect the usb but the phone dont seems to come to edl mode. just flashes the MI screen and power off repeatedly.
Now i connect the phone directly with battery on and its coming as charging but surprisingly the phone got detected, the device manager shows the phone as Linux file stor gaget usb device. I tried to flash with mi flash tool and its running indefinitely saying flashing..
Help...