HELP!! No Display with continous vibration - Android Q&A, Help & Troubleshooting

I was flashing image to my android via fastboot. During the process i was flashing stock rom system image. On the middle of writing system image the process stuck so i pulled the battery and again tried but then my android starts on powering up so that iibrates continously with no Display. I tried recovery mod and fastboot mode keys combination but the same vibration thing occurs. Even i plug my phone into charger the same problem persists. Please HeLP me

Could you tell us the model? Or at least the brand? That'll be a lot easier to debug.
Sent from my Nexus 4, want to know my current project? Check http://team-fun.eu

I am using Qmobile A4 bolt in pakistan. It's micromax a35 in india aswell

Help meeeeeeeeeeeeeeeeeee
I cant get into any mode....

Anyone here to help me? :-/

http://androidxda.com/download-micromax-stock-rom-models
This might help you. If you reflash your stock ROM it could be fixed.
Sent from my Nexus 4, want to know my current project? Check http://team-fun.eu

how can i flash because i cant flash via fastboot or via adb. after connecting the phone via usb phone starts to vibrate and the driver that windows detect is sprd com enumerator driver.

Related

HELP

I was flashing image to my android via fastboot. During the process i was flashing stock rom system image. On the middle of writing system image the process stuck so i pulled the battery and again tried but then my android starts on powering up so that vibrates continously with no Display. I tried recovery mod and fastboot mode keys combination but the same vibration thing occurs. Even i plug my phone into charger the same problem persists. Please HeLP me
I can't flash anything because i cant open on android fastboot or via adb. after connecting the phone via usb phone starts to vibrate continously and the driver that windows detect is sprd com enumerator driver.
Qmobile A4
1Ghz
256mb ram
512mb ram
In India it's micromax A35.

Gionee M3 Recovery/Boot Loop Problem

Ayow nigga .
The problem started when my system updates, after I click upgrade I've experience some effin errors . Then my Gionee m3 started to malfunction .
Help me this effin loop is so irritated . I already tried to flash stock rom , SP Flash, and I also download mediatek and some usb drivers . I think my main problem is SP flash tool cant recognize my device it wont charge either . Help me do you have some solution ?
i have the same problem my gionee m3.... i dont know other method to usb debuging my phone because it is only showing of android system recovery 3e when i use adb devices it not recognize it only shown as 0123456789abcdef sideload... in my searching it will change if i usb debugging enable... also sptools work on usb debugging i think
I have the same problem. I have installed two different sp flash tools, installed ADB drivers. my PC detects my phone and charging but having the option to open my files. I tried SP flash tools but wont detect my phone and will just charge.
PLease help.
Hi all,
I have a similar problem of bootloop after installing cm13 and gapps, it keeps rebooting back to twrp recovery. pls help.

help on lenovo a7000 hard brick

my lenovo a7000 doesn't turn on, can't go to recovery mode. also my first hardbrick experience. desperate for help.
whenever i use spflashtools to download a fresh stock rom to my phone, it always shows this problem
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
I've also tried to format it, but the same problem comes up.
Then I saw this vid. It's about fixing any bricked china phone.
"How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD]"
(pls search it on youtube if you like. somehow i couldn't post links.)
I don't know, but I think this vid is trying to fix those phones that aren't recognized by the PC. But mine is recognized. It comes up on the Device Manager as a MTK USB Port (COM10) with the battery on. But it keeps on getting disconnected and reconnected again. But this stops when I remove the battery, put the battery back on, click on download on the spflashtools, then connect the USB. The error will appear, but somehow the connection becomes stable.
Also this video talks about META mode. With the battery out, I tried all of the key combinations to enter this mode, without success whatsoever. If you know something, pls. share.
Maervince015 said:
my lenovo a7000 doesn't turn on, can't go to recovery mode. also my first hardbrick experience. desperate for help.
whenever i use spflashtools to download a fresh stock rom to my phone, it always shows this problem
"BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)"
I've also tried to format it, but the same problem comes up.
Then I saw this vid. It's about fixing any bricked china phone.
"How to Unbrick every MTK China Phone ! Preloader / SP Flashtool Fix [HD]"
(pls search it on youtube if you like. somehow i couldn't post links.)
I don't know, but I think this vid is trying to fix those phones that aren't recognized by the PC. But mine is recognized. It comes up on the Device Manager as a MTK USB Port (COM10) with the battery on. But it keeps on getting disconnected and reconnected again. But this stops when I remove the battery, put the battery back on, click on download on the spflashtools, then connect the USB. The error will appear, but somehow the connection becomes stable.
Also this video talks about META mode. With the battery out, I tried all of the key combinations to enter this mode, without success whatsoever. If you know something, pls. share.
Click to expand...
Click to collapse
Hi!
I had the same issue 2 day before!
To fix it I was unable with windows,so I downloaded a spflashtool for linux. I started with sudo (root access) and made the same method with the windows version.Its worked for me! But wait one or two day,maybe somebody will know a solution with windows.
My Lenovo A7000 Does not turn on
While installing the official update marshmallow device switched of and then it does not turn on. If i put in charge then after sometime lenovo screen appears and the it shuts down again,. Cannot go to recovery mode also. The lenovo screen shows TOOL Dl image fail in the left bottom side.
How can i solve this problem Please someone help me:crying::crying::crying:

Micromax Canvas P480 tab unable to boot

I have a Micromax Canvas p480 tab It has a charging issue when I charge it when it is on it not charge it charges when it is switch off so I think I should root it and install custom recovery I rooted it with kingroot and started searching for custom recovery I not found any custom recovery in YouTube I found a custom recovery it is phliz.recovery I not know it is for my device or not I flashed it using flashify and forgot to rename it recovery.img and when I reboot to recovery it shows a white screen and reboot. my device is running normally but now when I power off my device to charge it not show charging animation but the screen releases small amount of light and my device charge but it not show charging animation so for these I think I should change the boot animation to get back charging animation and I change my boot animation using root explorer but the boot animation changed but the charging animation problem exist after these I have installed a app root essential and done battery calibration from it but it also not solved my charging animation problem and after second time I do battery calibration my device unable to boot when I press power button the small amount of light releases and I not see any boot animation and my device not power on I not know exact reason for this but I think it is due to root essential and I tried reflashing stock but my device is not regonise by pc even I boot my device in fastboot mode it is not regonises by pc please help me
Re-flash again tablet's Stock ROM to bring tablet back to its initial state. You may use MTK Flash Tool to do so.
It is not recognised by pc
I have installed all drivers also but it is not recognised
@AnomoyousNoNameAndroid
To successfully run MTK Flash Tool requires you have installed Micromax P480 USB Driver - package name: Mediatek_Driver_Auto_Installer_v1.1352.zip.
Did you?
Yes I have installed it but it is not recognised I try in other pc also but it is always not recognised by pc and sp flash tool
@AnomoyousNoNameAndroid
As I can see you use SP Flash Tool and not MTK Flash Tool.
AFAIK these are the requirements for SP Flash Tool
MediaTek USB VCOM Driver
Android CDC Driver
Hence install these 2
Please give me these two drivers autoinstaller for windows 10
AnomoyousNoNameAndroid said:
Please give me these two drivers autoinstaller for windows 10
Click to expand...
Click to collapse
GIYF ...
jwoegerbauer said:
GIYF ...
Click to expand...
Click to collapse
What does this mean
I not found any bcom driver autoinstaller for windows 10
I have installed all drivers and sp tool but the pc is not detecting tab
I guess you ruined the tablet, now it is a case either for the repair center or the e-waste
Hey anyone please suggest a way to get my tablet back
Any other way to get my tablet back
AnomoyousNoNameAndroid said:
I have a Micromax Canvas p480 tab It has a charging issue when I charge it when it is on it not charge it charges when it is switch off so I think I should root it and install custom recovery I rooted it with kingroot and started searching for custom recovery I not found any custom recovery in YouTube I found a custom recovery it is phliz.recovery I not know it is for my device or not I flashed it using flashify and forgot to rename it recovery.img and when I reboot to recovery it shows a white screen and reboot. my device is running normally but now when I power off my device to charge it not show charging animation but the screen releases small amount of light and my device charge but it not show charging animation so for these I think I should change the boot animation to get back charging animation and I change my boot animation using root explorer but the boot animation changed but the charging animation problem exist after these I have installed a app root essential and done battery calibration from it but it also not solved my charging animation problem and after second time I do battery calibration my device unable to boot when I press power button the small amount of light releases and I not see any boot animation and my device not power on I not know exact reason for this but I think it is due to root essential and I tried reflashing stock but my device is not regonise by pc even I boot my device in fastboot mode it is not regonises by pc please help me
Click to expand...
Click to collapse
+1

Mi A3 Bricked, BlackScreen, Not Turning On.

Hey, I need Some help ASAP, I am in a Big trouble. So The whole scenario is that I decided to install the Paranoid Android 11 in my Mi A3 and After Unlocking the Bootloader, I changed the Boot Slot from A to B and Flashed the Twrp file ( to the boot ) and Pressed the Power and Volume down Button, The Phone turned off and is not turning on Not Even the Fastboot Logo, Its Bricked. (Here are some additional Points Which you Should Know, 1. I checked the ports on my Computer and It was Showing Qualcomm HS-USB QDLoader 9008 So I think the phone is in EDL mode. 2. I tried to Flash Mi A3 Stock Firmware using Miflash and It was Showing Error "Cannot receive hello Packet") The Phone is my Daily Driver and If anyone can, Please help me Fix this.
Even I got the same issue after downloading the latest Android 11, then got rectified the Mobile through the nearest service center.
Globally many people experienced the same issue.
Now it is ok !
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
elprfesor said:
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
Click to expand...
Click to collapse
could you explain it more?
I also dead briked my phone after install a11 and used qfil to flash some stuff in edl mode using test points,
I recommend using the right qualcomm driver 32 or 64 bits like your OS and also reboot after install driver,
I don't recommend open the back painel bcs even u doing it right it don't close well after bcs lose stickiness,
If u can just go to a service, they can manage with this better then u.
Same here. Even opened the back cover to touch the EDL points.
Tried getting out of that mode by flashing to stock ROM using the Mi Flash Tool as I'm getting a weird error, `Input string was not in the correct format`. even when using the very same input as I've seen on a YouTube Tutorial & I had also tried it out on the very same version of Flash Tool (and still got the error)

Categories

Resources