I have a Micromax Canvas p480 tab It has a charging issue when I charge it when it is on it not charge it charges when it is switch off so I think I should root it and install custom recovery I rooted it with kingroot and started searching for custom recovery I not found any custom recovery in YouTube I found a custom recovery it is phliz.recovery I not know it is for my device or not I flashed it using flashify and forgot to rename it recovery.img and when I reboot to recovery it shows a white screen and reboot. my device is running normally but now when I power off my device to charge it not show charging animation but the screen releases small amount of light and my device charge but it not show charging animation so for these I think I should change the boot animation to get back charging animation and I change my boot animation using root explorer but the boot animation changed but the charging animation problem exist after these I have installed a app root essential and done battery calibration from it but it also not solved my charging animation problem and after second time I do battery calibration my device unable to boot when I press power button the small amount of light releases and I not see any boot animation and my device not power on I not know exact reason for this but I think it is due to root essential and I tried reflashing stock but my device is not regonise by pc even I boot my device in fastboot mode it is not regonises by pc please help me
Re-flash again tablet's Stock ROM to bring tablet back to its initial state. You may use MTK Flash Tool to do so.
It is not recognised by pc
I have installed all drivers also but it is not recognised
@AnomoyousNoNameAndroid
To successfully run MTK Flash Tool requires you have installed Micromax P480 USB Driver - package name: Mediatek_Driver_Auto_Installer_v1.1352.zip.
Did you?
Yes I have installed it but it is not recognised I try in other pc also but it is always not recognised by pc and sp flash tool
@AnomoyousNoNameAndroid
As I can see you use SP Flash Tool and not MTK Flash Tool.
AFAIK these are the requirements for SP Flash Tool
MediaTek USB VCOM Driver
Android CDC Driver
Hence install these 2
Please give me these two drivers autoinstaller for windows 10
AnomoyousNoNameAndroid said:
Please give me these two drivers autoinstaller for windows 10
Click to expand...
Click to collapse
GIYF ...
jwoegerbauer said:
GIYF ...
Click to expand...
Click to collapse
What does this mean
I not found any bcom driver autoinstaller for windows 10
I have installed all drivers and sp tool but the pc is not detecting tab
I guess you ruined the tablet, now it is a case either for the repair center or the e-waste
Hey anyone please suggest a way to get my tablet back
Any other way to get my tablet back
AnomoyousNoNameAndroid said:
I have a Micromax Canvas p480 tab It has a charging issue when I charge it when it is on it not charge it charges when it is switch off so I think I should root it and install custom recovery I rooted it with kingroot and started searching for custom recovery I not found any custom recovery in YouTube I found a custom recovery it is phliz.recovery I not know it is for my device or not I flashed it using flashify and forgot to rename it recovery.img and when I reboot to recovery it shows a white screen and reboot. my device is running normally but now when I power off my device to charge it not show charging animation but the screen releases small amount of light and my device charge but it not show charging animation so for these I think I should change the boot animation to get back charging animation and I change my boot animation using root explorer but the boot animation changed but the charging animation problem exist after these I have installed a app root essential and done battery calibration from it but it also not solved my charging animation problem and after second time I do battery calibration my device unable to boot when I press power button the small amount of light releases and I not see any boot animation and my device not power on I not know exact reason for this but I think it is due to root essential and I tried reflashing stock but my device is not regonise by pc even I boot my device in fastboot mode it is not regonises by pc please help me
Click to expand...
Click to collapse
+1
Related
hello
Thank you for having treated this thread because i didn't find any solution in the net and the only forum i feelt that he is good and i will find the help is yours so please i want your help.
I have nextbook premium 8 se and i use it well suddenly it shutdown and do not respond I did a long press on power but nothing i tried to do a reset with that little thing in the corner but nothing i tried to get access to recovery mode with pressing power and sound + but nothing it always blocked in the first logo. by the way my tab was rooted using the methode linked in " www"dot"freaktab"dot"com/showthread.php?6674-Amlogic-Next8HD8G-(NX008HD8G)-Modified-Recovery-Stock-Rom-amp-Flashable-Root " i used the modified recovery and the root package and it worked well with super su.apk.shoretly my nextbook premium 8 se c'ant boot can't have access to recovery mode to do a hard reset can't be open at all and stil freeze in the first logo until i long press the power so that it shutdown and the battery and tha charger ac worked well and the led also .
I followed many threads some use aml flach some use rk29upgrade.exe but my problem was that i didn't have a full rom package. also i tried to connect my tab with my pc so that i plug the usb and press power and sound - until my pc shows a new unknown device and failed in getting driver and in the device manager it shows M3-Chip after a long search i installed the driver libusb-win32-bin-1.2.6.0 so my tab was named worldcup device but still not detected by aml flach and also rk29upgrade !!!!! I didn't know what should i do i am a beginner in android world so i reach these information after a long nights in the net so please i need your help guys i know that you can do it !!!
brick
you now own a brick if you flashed an incomplete rom package.......you need the fastboot files, etc yada yada from who ever makes that tablet....then maybe just maybe you can turn your beautiful new brick back into a little android man once again...
I guess I cant post the stupid link but google android SDK tools and go to that website and download the tools and install the basic package for your tablet and make sure google usb drivers are checked when downloading it all.....you need that google driver so you can install it on your windows system so your computer can read the tablet....anyways do that install driver in windows device manager under that unknown device and then reboot everything and you should have a generic android driver now installed..............you flashed root so you never set up SDK so im guessing you don't have a clue as to why you bricked your phone but hopefully this will help.....if you do unbrick it then you have to use that link you posted....his stock rom and flash that over what you have on there right now and you should just stop trying to flash stuff until you have a clue as to how to fix the device BEFORE you start.....
Ayow nigga .
The problem started when my system updates, after I click upgrade I've experience some effin errors . Then my Gionee m3 started to malfunction .
Help me this effin loop is so irritated . I already tried to flash stock rom , SP Flash, and I also download mediatek and some usb drivers . I think my main problem is SP flash tool cant recognize my device it wont charge either . Help me do you have some solution ?
i have the same problem my gionee m3.... i dont know other method to usb debuging my phone because it is only showing of android system recovery 3e when i use adb devices it not recognize it only shown as 0123456789abcdef sideload... in my searching it will change if i usb debugging enable... also sptools work on usb debugging i think
I have the same problem. I have installed two different sp flash tools, installed ADB drivers. my PC detects my phone and charging but having the option to open my files. I tried SP flash tools but wont detect my phone and will just charge.
PLease help.
Hi all,
I have a similar problem of bootloop after installing cm13 and gapps, it keeps rebooting back to twrp recovery. pls help.
Hey everyone,so i had this tecno h6 mtk 6582 rooted phone,i mistakenly deleted the font folder in system,all text disapeared,now that i had enabled recycle bin in es explorer,i restored the files and tried to reboot to see if text will come back,unfortunately it never booted,its in constant boot loop,tried to factory reset in recovery mode nothing it never booted,i have tried sp flashing tool but its not working as the preloader drivers are not fully installed or need to be updated,i tried using mtk droid tools but it wont connect the phone as usb debugging is not enabled.Any help on how to flash the phone,i already have its stock rom downloaded.Thanks in advance
Same Problem
I have the same problem
boot loop.
Click to expand...
Click to collapse
Mine was cause during trying to make Mx player codec neon latest version a system app using luky patcher latest version with custom putches uptodate as of 15,06,2015. My phone hookup in the process of copying file to .../system/ so i decided to restart it by holding the power key down for aprox. 7secs. when it did restart there was and is nothing than ExperinceSMART LIFEnow The usually TECNO welcome into boot logo. Ihave tried several method using the recovery section but nothing works. Please help :crying: i have the backup.backup data after the crash here in my sd card and also a backup.backup data after a restore. Pls help:silly:
I have been having the same problem recently
My Moto e2 is unlocked and doesn't work when it isn't connected to the charger
As soon as I remove the charging pin it gets switched off and I'm unable to power it up.
But when I plug in the charging cable it immediately lights up and is stuck in bootloop
It shows the bootloader screen and restarts again everytime
I'm able to go into the fastboot menu, but whenever I select any option other than barcodes it goes into the same bootloop.
In the fastboot menu it doesn't even show the device as connected when I use a data cable.
I tried charging it overnight. No use. It was stuck in the same bootloop till the next day
Please help
lsandmanl said:
I have been having the same problem recently
My Moto e2 is unlocked and doesn't work when it isn't connected to the charger
As soon as I remove the charging pin it gets switched off and I'm unable to power it up.
But when I plug in the charging cable it immediately lights up and is stuck in bootloop
It shows the bootloader screen and restarts again everytime
I'm able to go into the fastboot menu, but whenever I select any option other than barcodes it goes into the same bootloop.
In the fastboot menu it doesn't even show the device as connected when I use a data cable.
I tried charging it overnight. No use. It was stuck in the same bootloop till the next day
Please help
Click to expand...
Click to collapse
Flash stock full firmware.(not rom)
Using fastboot or mfastboot
The device shows the status : Not Connected in the menu
Any option other than barcodes cause the device to reboot again
Pankaj Rai said:
Flash stock full firmware.(not rom)
Using fastboot or mfastboot
Click to expand...
Click to collapse
The device shows the status : Not Connected in the menu
Any option other than barcodes cause the device to reboot again
lsandmanl said:
The device shows the status : Not Connected in the menu
Any option other than barcodes cause the device to reboot again
Click to expand...
Click to collapse
Change usb cable (or try in other pc)
Check whether Motorola drivers installed correctly or not.
Pankaj Rai said:
Change usb cable (or try in other pc)
Check whether Motorola drivers installed correctly or not.
Click to expand...
Click to collapse
The same thing has started on my Xiaomi redmi 1s Armani
Can you please guide me
lsandmanl said:
The same thing has started on my Xiaomi redmi 1s Armani
Can you please guide me
Click to expand...
Click to collapse
Ok,
1.download Mi Flash Tool
2.install drivers for 1s
3.download stock firmware for 1s
3.Connect your phone in fastboot mode (using original usb cable)
4.select firmware and flash
Hope this will help you
Hello, guys.
Recently, I've tried to root a Cubot Power 4G following a guide I found online. I probably should have been more catious about it, cause now the phone is stuck on a bootloop. I tried to install a custom recovery to try and fix this, but as there was no official twrp for Cubot, I once again downloaded something that was probably shady. Thus, now the phone is stuck on bootloop, won't access recovery mode, is now turned off because battery gave out, but if I try to connect it to the pc, it will start to bootloop again. I cannot access adb, or at the least I don't know a way to, since it keeps bootlooping and I have no way to access a recovery mode(since there's no one, or at the least, if there is, it's faulty). What can I do here?
@Giordyman
Re-flash phone's Stock ROM by means od MTK Flash Tool. You have to install the Mediatek VCOM drivers before on your Windows computer, if not done yet.
jwoegerbauer said:
@Giordyman
Re-flash phone's Stock ROM by means od MTK Flash Tool. You have to install the Mediatek VCOM drivers before on your Windows computer, if not done yet.
Click to expand...
Click to collapse
I did! Or so I think... The moment I connect it to the pc, it starts bootlooping and so the pc cannot actually connect there
Bootloop is a situation where you cannot get into the "normal" Android system. Take note that as soon Android logo is shown on phone's display Android kernel got successfully initialized, ADB & Fastboot are ready.