I have been having the same problem recently
My Moto e2 is unlocked and doesn't work when it isn't connected to the charger
As soon as I remove the charging pin it gets switched off and I'm unable to power it up.
But when I plug in the charging cable it immediately lights up and is stuck in bootloop
It shows the bootloader screen and restarts again everytime
I'm able to go into the fastboot menu, but whenever I select any option other than barcodes it goes into the same bootloop.
In the fastboot menu it doesn't even show the device as connected when I use a data cable.
I tried charging it overnight. No use. It was stuck in the same bootloop till the next day
Please help
lsandmanl said:
I have been having the same problem recently
My Moto e2 is unlocked and doesn't work when it isn't connected to the charger
As soon as I remove the charging pin it gets switched off and I'm unable to power it up.
But when I plug in the charging cable it immediately lights up and is stuck in bootloop
It shows the bootloader screen and restarts again everytime
I'm able to go into the fastboot menu, but whenever I select any option other than barcodes it goes into the same bootloop.
In the fastboot menu it doesn't even show the device as connected when I use a data cable.
I tried charging it overnight. No use. It was stuck in the same bootloop till the next day
Please help
Click to expand...
Click to collapse
Flash stock full firmware.(not rom)
Using fastboot or mfastboot
The device shows the status : Not Connected in the menu
Any option other than barcodes cause the device to reboot again
Pankaj Rai said:
Flash stock full firmware.(not rom)
Using fastboot or mfastboot
Click to expand...
Click to collapse
The device shows the status : Not Connected in the menu
Any option other than barcodes cause the device to reboot again
lsandmanl said:
The device shows the status : Not Connected in the menu
Any option other than barcodes cause the device to reboot again
Click to expand...
Click to collapse
Change usb cable (or try in other pc)
Check whether Motorola drivers installed correctly or not.
Pankaj Rai said:
Change usb cable (or try in other pc)
Check whether Motorola drivers installed correctly or not.
Click to expand...
Click to collapse
The same thing has started on my Xiaomi redmi 1s Armani
Can you please guide me
lsandmanl said:
The same thing has started on my Xiaomi redmi 1s Armani
Can you please guide me
Click to expand...
Click to collapse
Ok,
1.download Mi Flash Tool
2.install drivers for 1s
3.download stock firmware for 1s
3.Connect your phone in fastboot mode (using original usb cable)
4.select firmware and flash
Hope this will help you
Related
Hi
I have xperia neo v 11wxx
- performed unlock with test point (paid service) - all went ok
- flashed new soft with CWM - all went ok - flashed kernel in zip ICS_Spacious_Smooth_Light_ODEX_v2
After flashing phone stays at SE logo nothing happens
I Can't enter fastboot and flashboot mode
in fastboot the diode flashes blue for a sec and nothing happens
in flashboot (flashtool or companion or suse or manul) nothing happens
The phone is not detected properly (in flashtool i have to select my model manual) in companion it say "null"
In flashtool after manual selection it says that the phone flash is emty (no files in /system folders etc) no root ........
In s1tool after identify it gives some usb device error and missing file.
Iv also tried 3 diffrent computers (win8 - with driver signing off, 1x xp laptop , 1x win 7 laptop)
Tried diffrent drivers and diffrent cables
It look like kernel problem. Did you flash a kernel from zip package rom?
When you will want enter to fastboot mode turn off you device and put menu button and now connect phone to PC.
----------------------
Sorry for my bad English
tgrobi said:
It look like kernel problem. Did you flash a kernel from zip package rom?
When you will want enter to fastboot mode turn off you device and put menu button and now connect phone to PC.
----------------------
Sorry for my bad English
Click to expand...
Click to collapse
Yes iv flashed kernel from zip
I cannot enter fastboot (like i said blue led diode flashes and notthing happens)
The problem with fastboot started right after unlocking with testpoint.
Can you write what Rom you flashed?
tgrobi said:
Can you write what Rom you flashed?
Click to expand...
Click to collapse
ICS_Spacious_Smooth_Light_ODEX_v2
abaddon6661 said:
ICS_Spacious_Smooth_Light_ODEX_v2
Click to expand...
Click to collapse
It's good.
It seems like drivers problem.
But when you enter to fastboot mode the led blue flashes every time or fleshes on the moment and off.
If blue led off it's mean drivers problem for me.
I dont understand...if you cant enter fastboot mode,so you cant flash any kernel.My question,how you flash kernel from the zip actually?
flashes on the moment and off
iv tried many drivers nothing works
iv flashed zip in CWM
abaddon6661 said:
flashes on the moment and off
iv tried many drivers nothing works
Click to expand...
Click to collapse
Try to do hard reset. Remove the battery for 15 minutes.
Or try connect your phone to the mains without the battery for 15 minutes.
I see...actually you are not flash kernel,because kernel cant flashed through CWM.kernel ONLY can be flash through PC...
Sent from my MT11i using xda app-developers app
Your phone is not bricked. Had you unlocked your bootloader? New kernel can only be installed with unlocked bootloader in fastboot mode.
Open PC companion and select update phone, then remove battery, wait for 30 seconds, reinstall battery and connect phone to PC while pressing the back button, now follow instructions on PC. If this does not work you will need 'Sony_Ericsson_Update_Engine' which is no longer available on Sony website. If your bootloader is unlocked then you can install the stock kernel through fastboot mode and then flash stock ICS ROM through flashtool.
tgrobi said:
Try to do hard reset. Remove the battery for 15 minutes.
Or try connect your phone to the mains without the battery for 15 minutes.
Click to expand...
Click to collapse
Iv removed battery for 24h - no effect
Connecting without batter - no effect
mustang2011 said:
Your phone is not bricked. Had you unlocked your bootloader? New kernel can only be installed with unlocked bootloader in fastboot mode.
Open PC companion and select update phone, then remove battery, wait for 30 seconds, reinstall battery and connect phone to PC while pressing the back button, now follow instructions on PC. If this does not work you will need 'Sony_Ericsson_Update_Engine' which is no longer available on Sony website. If your bootloader is unlocked then you can install the stock kernel through fastboot mode and then flash stock ICS ROM through flashtool.
Click to expand...
Click to collapse
i have unlocked bootloader (test point - paid for this)
Pc companion detecting phone as "null"
Pressing back button - no effect. Phone not entering fastboot or flashmod mode
abaddon6661 said:
i have unlocked bootloader (test point - paid for this)
Pc companion detecting phone as "null"
Pressing back button - no effect. Phone not entering fastboot or flashmod mode
Click to expand...
Click to collapse
When you connect phone to mains does battery is charging?
Maybe microUSB port is damaged.
abaddon6661 has right, your phone isn't bricked.
----------------------------------
Sorry for my bad english
tgrobi said:
When you connect phone to mains does battery is charging?
Maybe microUSB port is damaged.
abaddon6661 has right, your phone isn't bricked.
----------------------------------
Sorry for my bad english
Click to expand...
Click to collapse
Battery is charging.
The problem is that i cannot reflash or enter fastboot.........
abaddon6661 said:
Battery is charging.
The problem is that i cannot reflash or enter fastboot.........
Click to expand...
Click to collapse
Can you enter CWM?
no
abaddon6661 said:
no
Click to expand...
Click to collapse
SUS (not SUSE) not detect phone too? In SUS is repair options.Your phone isn't brick SUS should repair it.
I spoke with a guy who had a similar problem. PC not detect phone and hi can't enter to fastboot mode. His phone has problem to battery. System kept that battery is low (0%). Exchange battery helped.
--------------------------------
Sorry for my bad english
hey everyone, flashed the cwm recovery which i found someware and the source were saying the it meant for all devices. but npw my phone does not go to fastnoot nor to recovery mode.
But, whenever i connect it to pc the the red noti. red light blinks and device name qualcomm 900e shows up in device manager. also waiting for device in adb. is there any way to revive my phone???:crying: :crying:
Try flashing a fastboot rom using MI flash tool beta.The red light shows that it is in edl mode.
GNVM said:
Try flashing a fastboot rom using MI flash tool beta.The red light shows that it is in edl mode.
Click to expand...
Click to collapse
flashtool does not recognize the device.
also in adb there is no device in list?
jobangill99 said:
flashtool does not recognize the device.
also in adb there is no device in list?
Click to expand...
Click to collapse
Try miflash to flash a new rom. If this does not work, then remove the back panel of you phone and disconnect the battery cable. Watch video on youtube for help. After that leave the phone disconnected for 30 mins and then reconnect it. Press vol down and power and you should be able to enter fastboot mode.
If nothing works go for test point method. see videos for better understanding.
As I was trying to flash global rom via miflash, It gave an error at %50 helloblabla and stuck at nowhere. Just red led blinking. When I connect it to the pc, It is seen as diagnostics 900e (com10). I hold volume + and - and plug the usb cable after taking out battery and usb cable for 10 seconds and putting them back from back but It doesn't work. I cannot see my device in miflash to flash the device.
Use the deep flash method mentioned here
http://en.miui.com/forum.php?mod=viewthread&tid=310325&extra=page=1&page=1&mobile=2
Had the same issue on my rn3 and was able to recover it using this method(when test point seemed the only option). You just need a copper wire strand to do this. Short the usb 2nd pin as in the video, then remove cable and reinsert. Phone will be detected as unknown device, then update driver and phone will be shown as qdownloader 9008 mode. Next open miflash and flash rom.
tuxing said:
Use the deep flash method mentioned here
http://en.miui.com/forum.php?mod=viewthread&tid=310325&extra=page=1&page=1&mobile=2
Had the same issue on my rn3 and was able to recover it using this method(when test point seemed the only option). You just need a copper wire strand to do this. Short the usb 2nd pin as in the video, then remove cable and reinsert. Phone will be detected as unknown device, then update driver and phone will be shown as qdownloader 9008 mode. Next open miflash and flash rom.
Click to expand...
Click to collapse
See, the person I bought the phone will do it for me. That's not something I want to do.
Use the modified fastboot to reboot to edl from fastboot. google "fastboot edl"
justinxfan said:
Use the modified fastboot to reboot to edl from fastboot. google "fastboot edl"
Click to expand...
Click to collapse
I wish I could go in fastboot mode Device doesn't turn on at all. It needs deep flashing as I can learn. Will do it soon today.
I was using miui pro and I flash Miui multi pro via twrp.
After complete installed rom reboot my phone.
but it is not open.
I try to power on but can't.
Try to open recovery mod via power +volume button but can't.
It's like phone power Off and can't power on.
Pls help me.
Try to flash via Xiaomi tools.
It find com port when I select location of flash files and click flash it failed after 40 second. Error flashing.
Totally no response of my phone when I press power button.
I just installed miui multi pro rom via red wolf.
And it's finished install.
I press reboot.
And the problem create.
Why and what the solution.
your phone is dead,just buy new one and problem can fixed,thanks
Is your booting in bootloader if yes flash fastboot rom
mohsinreadymoney said:
Is your booting in bootloader if yes flash fastboot rom
Click to expand...
Click to collapse
No
Phone power Off and can't go to fastboot mod
mohsinreadymoney said:
Is your booting in bootloader if yes flash fastboot rom
Click to expand...
Click to collapse
When I connect charger or USB with pc just notification light beep on/off nothing show on display.
Maybe your bettery dead. Plug it in charging for 2 hours, otherwise replace the battery.
Bro... Mera v aysa ho chuka hai .. agar charger or data cable plug in krne pr red light blink krta h to.. sbse phle back cover remove or battry ki wire ko disconnect kro or PC se connect kro .. fir mi flash tool se flash kro. Automatic EDL me aa jata h phone .. you can try this method..
Mizanur0001 said:
When I connect charger or USB with pc just notification light beep on/off nothing show on display.
Click to expand...
Click to collapse
1. Is it red light beeping ON/OFF?
2. What does the COM port say after connecting the phone to the PC in device manager? HS-USB diagnostics 900E or Downloader?
3. In either way install the Qualcomm HS-USB Downloader driver if not installed in your PC
4. Get ready to pull off the back cover watching youtube, it's not so difficult, disconnect the battery for 20s. Then reconnect. Next connect the cable to the PC to check if it connects in Download mode or not
Hey, i have a Xiaomi Note 3 Pro Kenzo and one day he just turned off and never went back again. When i plug it on pc, it just shows black screen, flashes the red light multiple times and it's recognized as Qualcomm HS-USB Diagnostics 900E.
I've already searched online and seems that my phone is stuck on EDL mode, so I made it go to the real EDL mode that allows me to flash it a new rom. I managed to make my pc recognize as Qualcomm 9008.
Beeing that, I tried to flash a rom but at the mi flash 20160330 it gets stuck on: "send nop command" forever and at the mi flash 2170425 it gets the error : "<?xml version="1.0" encoding="UTF-8" ?><data><log value="init storage:fail " /></data> "
I've got another redmi note 3 pro, and I can flash it, so I don't there's any problem with my computer, but the info is:
Windows 10 Pro 64x
Safe Drivers Disable
If anyone can help...
gustavoabonare said:
Hey, i have a Xiaomi Note 3 Pro Kenzo and one day he just turned off and never went back again. When i plug it on pc, it just shows black screen, flashes the red light multiple times and it's recognized as Qualcomm HS-USB Diagnostics 900E.
I've already searched online and seems that my phone is stuck on EDL mode, so I made it go to the real EDL mode that allows me to flash it a new rom. I managed to make my pc recognize as Qualcomm 9008.
Beeing that, I tried to flash a rom but at the mi flash 20160330 it gets stuck on: "send nop command" forever and at the mi flash 2170425 it gets the error : "<?xml version="1.0" encoding="UTF-8" ?><data><log value="init storage:fail " /></data> "
I've got another redmi note 3 pro, and I can flash it, so I don't there's any problem with my computer, but the info is:
Windows 10 Pro 64x
Safe Drivers Disable
If anyone can help...
Click to expand...
Click to collapse
Seems like a problem with the emmc chip. Get the device checked to make sure that your emmc is not faulty. If the emmc is safe, contact me and I'll help. Until then good luck.
Archit9169 said:
Seems like a problem with the emmc chip. Get the device checked to make sure that your emmc is not faulty. If the emmc is safe, contact me and I'll help. Until then good luck.
Click to expand...
Click to collapse
Thx for the reply man, the problem is that i live in Brazil, we don't have Xiaomi assistance, so I don't have a place to get it checked ;x.
But yeah, I saw in other forums that this migth be a EMMC problem
gustavoabonare said:
Thx for the reply man, the problem is that i live in Brazil, we don't have Xiaomi assistance, so I don't have a place to get it checked ;x.
But yeah, I saw in other forums that this migth be a EMMC problem
Click to expand...
Click to collapse
Forget about warranty, get it checked at a local store.
I have faced this too ,3 months ago , you just need to open the case and then remove the unplug the battery cable then flash the fastboot ROM ,yes the PC will give give enough power to flash ,you must not replug the battery while flashing ,now when the flash is don't unplug the USB cable and put it in charger by hitting power button for 8 secs it will not charge then immediately replug the the battery cable then again press the power button for 8 sec till it reboots ,boom your system will boot
---------- Post added at 04:27 AM ---------- Previous post was at 04:26 AM ----------
I have faced this too ,3 months ago , you just need to open the case and then unplug the battery cable then flash the fastboot ROM ,yes the PC will give give enough power to flash ,you must not replug the battery while flashing ,now when the flash is don't unplug the USB cable and put it in charger by hitting power button for 8 secs it will not charge then immediately replug the the battery cable then again press the power button for 8 sec till it reboots ,boom your system will boot
Deep flash cable
Try flashing after removing the battery like Aditya said it worked on my friends phone.
[email protected] said:
I have faced this too ,3 months ago , you just need to open the case and then remove the unplug the battery cable then flash the fastboot ROM ,yes the PC will give give enough power to flash ,you must not replug the battery while flashing ,now when the flash is don't unplug the USB cable and put it in charger by hitting power button for 8 secs it will not charge then immediately replug the the battery cable then again press the power button for 8 sec till it reboots ,boom your system will boot
Click to expand...
Click to collapse
Thx man, will try when I get back from work
balazs312 said:
Deep flash cable
Click to expand...
Click to collapse
It's already in EDL 9008 mode, I used the test point. Don't know if the DFC will do anything different, but will try it anyway if the way Aditya told me don't work
I should explain you fully
1)removing battery will keep the phone in edl mode but it will solve your error of mi flash is mi flash will successfully flash the fastboot ROM ,remember you need to first remove the battery cable then insert phone ,no light will blink but it will be recognized as qsp loader port in your PC ,don't worry
2) after successfully completing the first step flash the complete fastboot ROM ,it should go success
3)now don't replug the battery cable now ,do nothing ,just insert cherger and press power button as long as the screen don't turn on ,when it will turn on the battery bar wouldn't go up, then without removing the charger cable from phone ,insert battery, you will see that battery is still not charging, nothing to worry this was just to turn the display on ,now again press the power button for 10 to 14 sec so that the device reboot and boom your phone will start charging and after you can successfully boot into system and use your phone.
4)this is if you still cannot successfully flash using mi flash tool just unplug all a the cable which you see after opening back case don't worry you just have to open the cables which you see ,you don't have to unplug those cables in which you have to open screws etc .
Hope this will help you
[email protected] said:
I should explain you fully
1)removing battery will keep the phone in edl mode but it will solve your error of mi flash is mi flash will successfully flash the fastboot ROM ,remember you need to first remove the battery cable then insert phone ,no light will blink but it will be recognized as qsp loader port in your PC ,don't worry
2) after successfully completing the first step flash the complete fastboot ROM ,it should go success
3)now don't replug the battery cable now ,do nothing ,just insert cherger and press power button as long as the screen don't turn on ,when it will turn on the battery bar wouldn't go up, then without removing the charger cable from phone ,insert battery, you will see that battery is still not charging, nothing to worry this was just to turn the display on ,now again press the power button for 10 to 14 sec so that the device reboot and boom your phone will start charging and after you can successfully boot into system and use your phone.
4)this is if you still cannot successfully flash using mi flash tool just unplug all a the cable which you see after opening back case don't worry you just have to open the cables which you see ,you don't have to unplug those cables in which you have to open screws etc .
Hope this will help you
Click to expand...
Click to collapse
Hey man, didn't work, I disconnected the battery as you said and still got the error when I tried to flash. I downloaded the last rom available from xiaomi site (kenzo_global_images_V9.5.3.0.MHOMIFA_20180405.0000.00_6.0_global_7b6353b764), but still nothing.
I guess it's the EMMC chip alright ;x, but thx anyway
Bro sorry that I couldn't help but can you please try unpluging the cable as shown in the figure and then try to flash using mi flash tool if it still even don't help sorry bro
Unplug the cable given in figure and then try to flash using mi flash , if the device is not detected then replug that cable and and then try to flash if it still don't help sorry bro
[email protected] said:
Bro sorry that I couldn't help but can you please try unpluging the cable as shown in the figure and then try to flash using mi flash tool if it still even don't help sorry bro
Unplug the cable given in figure and then try to flash using mi flash , if the device is not detected then replug that cable and and then try to flash if it still don't help sorry bro
Click to expand...
Click to collapse
Already tried, didn't work, but thx anyways man
Just plug it in to a wall charger. I had the same issue even after edl flash miui rom but charging it fixed my problem. Follow these steps.
1- plug it in
2- ignore the red led blinking
3- wait for 5 min.
4- it will boot.
5- if doesn't, I'm sorry