Ayow nigga .
The problem started when my system updates, after I click upgrade I've experience some effin errors . Then my Gionee m3 started to malfunction .
Help me this effin loop is so irritated . I already tried to flash stock rom , SP Flash, and I also download mediatek and some usb drivers . I think my main problem is SP flash tool cant recognize my device it wont charge either . Help me do you have some solution ?
i have the same problem my gionee m3.... i dont know other method to usb debuging my phone because it is only showing of android system recovery 3e when i use adb devices it not recognize it only shown as 0123456789abcdef sideload... in my searching it will change if i usb debugging enable... also sptools work on usb debugging i think
I have the same problem. I have installed two different sp flash tools, installed ADB drivers. my PC detects my phone and charging but having the option to open my files. I tried SP flash tools but wont detect my phone and will just charge.
PLease help.
Hi all,
I have a similar problem of bootloop after installing cm13 and gapps, it keeps rebooting back to twrp recovery. pls help.
Related
Hello guys.
I have a problem with my phone. It's an Archos 40 Titanium (neither model c or model b).
I flashed recently the rom of Wiko Sunset which is a KitKat rom. I thought it would be fine as wiko sunset has really similar features to my phone. Before I flashed that rom, I made a backup with SP Flash tool.
The problem now is that I can't flash the backup back. I get always Error 4032: Enable_DRAM_Failed. I've tried different versions of SP Flash Tool and drivers (MTK USB and VCOM drivers). I've followed many "guides" that I found on different websites (eg. to flash the preloader of the stock rom without having the battery in the phone etc), but unfortunatelly I get still the same error.
It's maybe worth mentioning that if I connect the phone without the battery and by pusshing VOL+ and power buttons then it connects but after 4-5 seconds it disconnects. If I do the same with the battery on, then it doesn't disconnect.
I am running Windows 7 x64 and Linux through dual boot.
I would be greatful if you guys could help me.
If you need any more info, you can ask me.
Thank you in advance.
Update:
I solved it by myself. After some tries it "accepted" the format I was trying to do (with SP Flash Tool) . Now I am flashing back my backup..
how to
first download the right firmware for this phone
then open sp flash tool and open the scarter from firmware if the firmware is corect all the directions is on screen of sp flash tool.
now click the download buton
after 2 sec remove the batery from your phone and conect the usb cable
windows update find automatic the right drivers mtk 65xx preloader vcom and after 5 sec the drivers is ok.
sp tool now flashing the firmware and the yelow bar work .
when you see the check on green square ,work is finished.
now you can unplung the usb cable and open your device.
What if i ddnt get the stock rom...
My bootloader is gone..
And phone is dead..
Really in financial problem
ELUGA S STOCK ROM...
google drive links are showing
404 error
You can find the right rom for your device on needrom site and flash it again. Check the choice of download+format
Ok.
So I have Doogee Valencia2 Y100 Plus for only two weeks, and after installing Chainfire3D my phone got stuck in a bootloop.. so I have no ADB update, no sdcard update and no cache update.. so I have been left with factory reset but it didn't work.. I also don't have CWM or TWRP recovery, but USB debugging for me is on.. I am sure I have all drivers for USB installed because before I messed up my phone I had to connect it to my pc, plus I have manually downloaded proper drivers.. I have tried with ADB shell but it won't detect my phone, otherwise I could already fix my problem.. Doogee Valencia2 Y100 Plus doesn't seem to have a firmware online, so I couldn't re-flash it. Help, help.. surely I will never download Chainfire3D ever again..
HELP
I have same problem it stuck on boot loop when i was trying to update phone
You need to flash rom.
http://www.needrom.com/download/doogee-aurora-y100/ | + if worket
Hey guys, i am hoping someone can help me.
I have bricked my phone, no recovery, no fastboot, nothing, just vibrations and notification led. So i managed to open up phone and to disconnect battery.
Next thing i installed lattest sp flash tool v5.1952, and i found authentication file on xda. I downloaded 11.0.7.0 global image, and use Android_scatter file from there. I installed both drivers for mediatek preload one and vcom drivers, and rebooted my phone.
So i turned the phone off, by disconnecting battery, pressed start on sp flash tool, connected the phone via usb cable, but nothing is happening. I also tried while phone was on but same thing.. Have anyone have same issues, can somebody help me please?
You will need a authorized mi account if u have can you please help me
Hello, guys.
Recently, I've tried to root a Cubot Power 4G following a guide I found online. I probably should have been more catious about it, cause now the phone is stuck on a bootloop. I tried to install a custom recovery to try and fix this, but as there was no official twrp for Cubot, I once again downloaded something that was probably shady. Thus, now the phone is stuck on bootloop, won't access recovery mode, is now turned off because battery gave out, but if I try to connect it to the pc, it will start to bootloop again. I cannot access adb, or at the least I don't know a way to, since it keeps bootlooping and I have no way to access a recovery mode(since there's no one, or at the least, if there is, it's faulty). What can I do here?
@Giordyman
Re-flash phone's Stock ROM by means od MTK Flash Tool. You have to install the Mediatek VCOM drivers before on your Windows computer, if not done yet.
jwoegerbauer said:
@Giordyman
Re-flash phone's Stock ROM by means od MTK Flash Tool. You have to install the Mediatek VCOM drivers before on your Windows computer, if not done yet.
Click to expand...
Click to collapse
I did! Or so I think... The moment I connect it to the pc, it starts bootlooping and so the pc cannot actually connect there
Bootloop is a situation where you cannot get into the "normal" Android system. Take note that as soon Android logo is shown on phone's display Android kernel got successfully initialized, ADB & Fastboot are ready.
I'm trying to install stock rom to Lenovo a2016a40 (Lenovo B). After I connect phone to my system using volume down key preloder appears in device manager but after few seconds it disconnects from pc. I have tried to install via SP flash tool but it fails and gives error.
I have tried to update all mediatek drivers , changed port and cables but still I'm facing that issue , please help with this issue.
@sangram200
AFAIK Lenovo Vibe B is based on Mediatek chipset, hence SP Flash Tool seems to be the correct one.
It just disappeared from Device manager on PC
It simply disconnects from pc after few seconds ( disappeared from device manager), hense SP tool fails there is no issue with flash tool , its the connectivity issue but I don't understand why it disconnects from PC ,I have tried to update drivers and changed cables and switched ports but still having same issue.
@sangram200
I'm pretty sure you haven't installed the correct USB-drivers as needed, for example the MediaTek MT65xx USB VCOM Driver: this USB Driver will make sure that your MediaTek Android device is properly recognized by your PC, it ensures that there will be no hiccups while you are trying to flash a custom ROM or when you are trying to root your device.