Bricked redmi 6a [sp flash tool issue] - Xiaomi Redmi 6A Questions & Answers

Hey guys, i am hoping someone can help me.
I have bricked my phone, no recovery, no fastboot, nothing, just vibrations and notification led. So i managed to open up phone and to disconnect battery.
Next thing i installed lattest sp flash tool v5.1952, and i found authentication file on xda. I downloaded 11.0.7.0 global image, and use Android_scatter file from there. I installed both drivers for mediatek preload one and vcom drivers, and rebooted my phone.
So i turned the phone off, by disconnecting battery, pressed start on sp flash tool, connected the phone via usb cable, but nothing is happening. I also tried while phone was on but same thing.. Have anyone have same issues, can somebody help me please?

You will need a authorized mi account if u have can you please help me

Related

Archos 40 Titanium: Enable_Dram_Failed error

Hello guys.
I have a problem with my phone. It's an Archos 40 Titanium (neither model c or model b).
I flashed recently the rom of Wiko Sunset which is a KitKat rom. I thought it would be fine as wiko sunset has really similar features to my phone. Before I flashed that rom, I made a backup with SP Flash tool.
The problem now is that I can't flash the backup back. I get always Error 4032: Enable_DRAM_Failed. I've tried different versions of SP Flash Tool and drivers (MTK USB and VCOM drivers). I've followed many "guides" that I found on different websites (eg. to flash the preloader of the stock rom without having the battery in the phone etc), but unfortunatelly I get still the same error.
It's maybe worth mentioning that if I connect the phone without the battery and by pusshing VOL+ and power buttons then it connects but after 4-5 seconds it disconnects. If I do the same with the battery on, then it doesn't disconnect.
I am running Windows 7 x64 and Linux through dual boot.
I would be greatful if you guys could help me.
If you need any more info, you can ask me.
Thank you in advance.
Update:
I solved it by myself. After some tries it "accepted" the format I was trying to do (with SP Flash Tool) . Now I am flashing back my backup..
how to
first download the right firmware for this phone
then open sp flash tool and open the scarter from firmware if the firmware is corect all the directions is on screen of sp flash tool.
now click the download buton
after 2 sec remove the batery from your phone and conect the usb cable
windows update find automatic the right drivers mtk 65xx preloader vcom and after 5 sec the drivers is ok.
sp tool now flashing the firmware and the yelow bar work .
when you see the check on green square ,work is finished.
now you can unplung the usb cable and open your device.
What if i ddnt get the stock rom...
My bootloader is gone..
And phone is dead..
Really in financial problem
ELUGA S STOCK ROM...
google drive links are showing
404 error
You can find the right rom for your device on needrom site and flash it again. Check the choice of download+format
Ok.

Homtom HT3 stuck on boot logo

Hi guys, I recently purchased a Homtom HT3 for my mother, when it arrived to me I charged it and checked it out a bit just to make sure everything was fine which it was.
She collected it from me the next day and told me she'd start to use it the day after, she calls me up the next day and tells me there's some problems with it and a few people at her workplace tried to fix it for her to no avail. I pick the phone back up and I notice that everytime I power it on, it gets stuck on the "homtom" logo.
As I don't know too much about fixing phones I only took the following steps before asking for advice here; I went into recovery mode by holding up volume and power button, the android guy with the red triangle appeared so I tapped up + power button to get into the recovery(?) menu. I wiped the phone to factory settings and deleted the cache in there but it hasn't fixed the problem.
I assume I need to flash a firmware or something to potentially fix this, but I'm unable to find an official firmware from doogee/homtom's site for the HT3. I've found a firmware that I downloaded from "chinagadgetsreviews" but I'm a bit weary to try and flash with that rom because it isn't from the manufacturer. (even if I knew how to - the only experience I have is rooting my own phone but that's when I actually had access to a working phone, not one thats stuck on a boot logo).
Sorry for the long post but could anyone guide me in the right direction here? TIA
I'm not opposed to not using official firmware, I think I use cyanogen mod(?) on my own phone. I'd just like the problem fixed in the easiest way possible.
Trying to fix it myself by flashing a rom via SP flash tools but I've ran into another problem which is stopping any kind of progress - the phone isn't detected in Windows, I can't enable usb debugging because I can't get passed the boot loop, I've tried installing the ADB driver manually which didn't seem to work (just said it didn't install correctly and left me with a yellow exclamation mark) and I tried to install it automatically via ADB driver installer but it just throws up an error that the device isn't detected.
Any help would be greatly appreciated.
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Same here - any solution for this problem?
Kleos89 said:
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Click to expand...
Click to collapse

Homtom HT3 flashing problems

Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Once the red line loads, try putting back the battery. Sometimes the handset needs power from the battery. I did that with my HT3: once SP Flash Tool detected my phone, I put the battery back.

Dead boot cm flare 4 after flashing help!

FLASHED 2.DUMP_ROM [SPFT][ROOTED] FROM All About CherryMobile Flare 4 AFTER IT SAYS FLASHING IS DONE 100% WITH CHECK MARK THEN MY PHONE DIDNT RESTART I WAITED FOR ABOUT 15 MINUTES TO SEE IF THERE'S SOMETHING MIGHT HAPPEN BUT NOTHING ONLY BLACK..
SO I PULLED THE USB CONNECTOR, THEN PLUG IT BACK. THE ONLY THING THAT I SAW IS UNRECOGNIZED USB. NO CHARGING LOGO OR ANDROID OR ANYTHING EVEN THE LED INDICATION OF CHARGING IS NOT BLINKING.
I HOPE SOMEONE CAN HELP ME :crying::crying::crying::crying::crying::crying::crying:
UP
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
AlexanderBabansky said:
I also had the same problem and I also cried. Your phone have MediaTek MT6753 Chipset. I have MT6582. You flashed ROM via recovery and looks like ROM have conflict with bootloader.
SP Flash Tool can flash shutdown MTK devices via USB. Your computer show "UNRECOGNIZED USB". SP Flash Tool need special ROM and driver to find your phone. Not sure, that SP Flash Tool can help you, but it helped me.
How I decided problem:
I waited some time (I went sleep, it was night)
Found stock ROM for Flashtool. This ROM contain all data for device and have more size.
Install driver for my phone.
Pulled out battery.
Connect with computer via USB.
Put in battery and computer detected phone as "MediatekDevice". SP Flash tool also detected phone
Started flashing.
Good luck!
Click to expand...
Click to collapse
thanks bro.
now it show dram fail (4032)

[Redmi Note 2]Bricked.... Need to recover data

Hi, my device suddenly stopped working, I kept it to charge over night and in the morning, problem started
So i ordered a new battery but still nothing.
I think that phone is bricked
Simply no response, twrp or fastboot, nothing
The problem is that i need my data from the phone, i have set backup every friday it hapened in thursday - so i will loose som of my data
What i should use? SP flash tool or MI flash tool, or chinese miracle?
Repair me if i wrong with something.
When i unplug the battery. phone will connect to PC but after few seconds it will automaticaly disconnect,
I've installed Mediatek DA USB VCOM drivers - but there is yellow triangle when i connect phone to PC it will recognise it as - Mediatek USB port
Thanks for any help.

Categories

Resources