Hey, I need Some help ASAP, I am in a Big trouble. So The whole scenario is that I decided to install the Paranoid Android 11 in my Mi A3 and After Unlocking the Bootloader, I changed the Boot Slot from A to B and Flashed the Twrp file ( to the boot ) and Pressed the Power and Volume down Button, The Phone turned off and is not turning on Not Even the Fastboot Logo, Its Bricked. (Here are some additional Points Which you Should Know, 1. I checked the ports on my Computer and It was Showing Qualcomm HS-USB QDLoader 9008 So I think the phone is in EDL mode. 2. I tried to Flash Mi A3 Stock Firmware using Miflash and It was Showing Error "Cannot receive hello Packet") The Phone is my Daily Driver and If anyone can, Please help me Fix this.
Even I got the same issue after downloading the latest Android 11, then got rectified the Mobile through the nearest service center.
Globally many people experienced the same issue.
Now it is ok !
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
elprfesor said:
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
Click to expand...
Click to collapse
could you explain it more?
I also dead briked my phone after install a11 and used qfil to flash some stuff in edl mode using test points,
I recommend using the right qualcomm driver 32 or 64 bits like your OS and also reboot after install driver,
I don't recommend open the back painel bcs even u doing it right it don't close well after bcs lose stickiness,
If u can just go to a service, they can manage with this better then u.
Same here. Even opened the back cover to touch the EDL points.
Tried getting out of that mode by flashing to stock ROM using the Mi Flash Tool as I'm getting a weird error, `Input string was not in the correct format`. even when using the very same input as I've seen on a YouTube Tutorial & I had also tried it out on the very same version of Flash Tool (and still got the error)
Related
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
have you tried to re-install the Driver? make sure that you only use win 64 bit for flashing, many issues occurred when you try to flash using win 32 bit
I am using Windows 10 64 bit. Moreover, I have installed ADB drivers separately (although these seem to come with the Mi Flash utility too).
I think it's intended behavior not to be able to flash via Fastboot with the bootloader locked? I was hoping to be able to restore via Mi PC Suite but it can't seem to see the phone, although the computer does and Mi Flash does too.
try using Mi PC Suite, http://en.miui.com/thread-92720-1-1.html, After Mi PC Suite is installed, make sure that your phone is in fastboot mode, connect your phone to a computer, and select the correct ROM file to flash
"I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too)."
For some reason, Mi PC Suite is not detecting the phone.
Ultimatum99 said:
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
Hello there,
I faced the same situation, but unfortunately in download mode, the phone is not detected in MiFlash, it detected as QHSUSB_BULK in Windows. Phone is detected while in fastboot and normal mode, but not in download mode. Do you have any idea what to do?
I expect this is a driver issue, but I can't figure out what.. I'm using Windows 64 bit, disabled driver signature enforcement, and installed all driver from MiFlash installation (there were 3 of driver notification prompt).
noersetiawan said:
Hello there,
I faced the same situation, but unfortunately in download mode, the phone is not detected in MiFlash, it detected as QHSUSB_BULK in Windows. Phone is detected while in fastboot and normal mode, but not in download mode. Do you have any idea what to do?
I expect this is a driver issue, but I can't figure out what.. I'm using Windows 64 bit, disabled driver signature enforcement, and installed all driver from MiFlash installation (there were 3 of driver notification prompt).
Click to expand...
Click to collapse
You need to update QHSUSB_BULK to the Qualcomm driver.
Device Manager > Select QHSUSB_BULK > Update Driver Software > Find manually the location of the driver, most likely: C:\Program Files (x86)\Xiaomi\MiPhone\Qualcomm\Driver
The driver should now appear as Qualcomm something, and Mi Flash should be able to see the phone.
Does this work?
Ultimatum99 said:
You need to update QHSUSB_BULK to the Qualcomm driver.
Device Manager > Select QHSUSB_BULK > Update Driver Software > Find manually the location of the driver, most likely: C:\Program Files (x86)\Xiaomi\MiPhone\Qualcomm\Driver
The driver should now appear as Qualcomm something, and Mi Flash should be able to see the phone.
Does this work?
Click to expand...
Click to collapse
Hi,
Thank you for the help. Unfortunately it doesn't work straight away, fortunately this leads me to the right direction, after I tried to point the driver to Xiaomi directory, a window dialog says the driver is 32 bit thus noninstallable for my PC, then I looked around for 64 bit driver for Qualcomm, installed it. I can finally install the driver but the phone is detected as unknown USB device, after removing it from Device Manager, restarted my PC, and tried again, it's still the same, on the third try it finally detected properly. It's working now, thank you very much.
Really weird why did MiFlash comes with noninstallable driver.
Ultimatum99 said:
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
My 3s prime is locked bootloader, developer option off, oem disable thus not able to flash as device is in bootloop.
Garu8 said:
My 3s prime is locked bootloader, developer option off, oem disable thus not able to flash as device is in bootloop.
Click to expand...
Click to collapse
you have to flash in edl mode not fastboot so google on how to take redmi 3s into edl mode then you can flash the rom in locked bootloader.in redmi 3 we use volume up and volume down and power button.press all three at the same time and it will take u to edl mode.screen becomes all black but if you plug it to ur computer and press refresh in miflash then it will show as com 10 or 20.thats for redmi 3.maybe redmi 3s has the same steps
jokerpappu said:
you have to flash in edl mode not fastboot so google on how to take redmi 3s into edl mode then you can flash the rom in locked bootloader.in redmi 3 we use volume up and volume down and power button.press all three at the same time and it will take u to edl mode.screen becomes all black but if you plug it to ur computer and press refresh in miflash then it will show as com 10 or 20.thats for redmi 3.maybe redmi 3s has the same steps
Click to expand...
Click to collapse
I have already tried to switch to edl mode using cmd with "fastboot oem edl" command but it enter bootloop. It happen because oem is locked alongwith usb debugging as I didn't unlock developer option.
Garu8 said:
I have already tried to switch to edl mode using cmd with "fastboot oem edl" command but it enter bootloop. It happen because oem is locked alongwith usb debugging as I didn't unlock developer option.
Click to expand...
Click to collapse
then you should buy a usb cable which has a button in it which forces xiaomi devices to boot into edl mode.i forgot its name but i think you can google to find it
jokerpappu said:
then you should buy a usb cable which has a button in it which forces xiaomi deveot into edl mode.i forgot its name but i think you can google to find it
Click to expand...
Click to collapse
I believe you are talking about dfc a.k.a deep flash cable. I have searched alot I couldn't find it on any e-commerce site except alibaba which doesn't ship at my place. Can yousuggest any seller or website if you ever came across selling dfc cable? Deep flash method is the only last resort for my problem other than sending phone to service centre. Could you suggest any website to make dfc cable manually?;as I have searched youtube but non of the method mentioned in it seemed liable to me.
Garu8 said:
I believe you are talking about dfc a.k.a deep flash cable. I have searched alot I couldn't find it on any e-commerce site except alibaba which doesn't ship at my place. Can yousuggest any seller or website if you ever came across selling dfc cable? Deep flash method is the only last resort for my problem other than sending phone to service centre. Could you suggest any website to make dfc cable manually?;as I have searched youtube but non of the method mentioned in it seemed liable to me.
Click to expand...
Click to collapse
i saw it on ebay also.i think that seller will ship worldwide to any country.
here is the link
http://www.ebay.com/sch/i.html?_fro...le.TRS0&_nkw=xiaomi+deep+flash+cable&_sacat=0
You don't need deep flash cable use button combo to put in edl mode. From device manager update driver for QHSUSB_BULK. \After that reboot pc with driver signature disabled, then open mi flash and phone should be recognised. Just found the thread I used to remove vendor rom.
http://en.miui.com/thread-254606-1-1.html
JUST MAKE SURE YOU DOWNLOAD THE ROM FOR YOUR DEVICE!:crying:
jazz452 said:
You don't need deep flash cable use button combo to put in edl mode. From device manager update driver for QHSUSB_BULK. \After that reboot pc with driver signature disabled, then open mi flash and phone should be recognised. Just found the thread I used to remove vendor rom.
http://en.miui.com/thread-254606-1-1.html
JUST MAKE SURE YOU DOWNLOAD THE ROM FOR YOUR DEVICE!:crying:
Click to expand...
Click to collapse
As I have already said edl mode won't work since developers option was not activated as edl requires oem activated. I had already tried all the methods.
By the way thanks to u all at xda as I have successfully flashed new rom using deep flash cable method...
Nexus 10 rooted in a bootloop
Hi folks! I'm a newbie with this stuffs so I'll do my best to explain the issue. I've recently rooted my Nexus 10 with Nexus root toolkit 2.1.9( I believe). All was fine until I turn it off and back on. Now I'm in a bootloop. I could use the Unroot+flash command but my windows 7 won't detect the device. It only detect it when my tablet is connected and turn off. In that case shows as MTP. Can anyone help me reinstalling the driver or else? Thank you
Novice12 said:
Hi folks! I'm a newbie with this stuffs so I'll do my best to explain the issue. I've recently rooted my Nexus 10 with Nexus root toolkit 2.1.9( I believe). All was fine until I turn it off and back on. Now I'm in a bootloop. I could use the Unroot+flash command but my windows 7 won't detect the device. It only detect it when my tablet is connected and turn off. In that case shows as MTP. Can anyone help me reinstalling the driver or else? Thank you
Click to expand...
Click to collapse
Hi,
This is Redmi 3 section. The correct section for your device is here. Please explain your issue there. Good luck!
Sent from my Redmi 3 using XDA Labs
Unbrick Xiaomi Redmi 3s prime with unlocked boot loader
Hi all,
I've a Xiaomi redmi 3s prime with rooted and unlocked bootloader. I tried unrooting from SuperSu and the phone is in bootloop now. I had TWRP recovery mod installed and a nandroid back up in my phone. But, I can't even enter the recovery mode now. Fast boot is working. Please help me to unbrick it without losing the data or recover the nandroid back up at least.
Thanks!!
Ultimatum99 said:
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
look
you got bootloop and its very very different from brick
update your title
Hi guys, I recently purchased a Homtom HT3 for my mother, when it arrived to me I charged it and checked it out a bit just to make sure everything was fine which it was.
She collected it from me the next day and told me she'd start to use it the day after, she calls me up the next day and tells me there's some problems with it and a few people at her workplace tried to fix it for her to no avail. I pick the phone back up and I notice that everytime I power it on, it gets stuck on the "homtom" logo.
As I don't know too much about fixing phones I only took the following steps before asking for advice here; I went into recovery mode by holding up volume and power button, the android guy with the red triangle appeared so I tapped up + power button to get into the recovery(?) menu. I wiped the phone to factory settings and deleted the cache in there but it hasn't fixed the problem.
I assume I need to flash a firmware or something to potentially fix this, but I'm unable to find an official firmware from doogee/homtom's site for the HT3. I've found a firmware that I downloaded from "chinagadgetsreviews" but I'm a bit weary to try and flash with that rom because it isn't from the manufacturer. (even if I knew how to - the only experience I have is rooting my own phone but that's when I actually had access to a working phone, not one thats stuck on a boot logo).
Sorry for the long post but could anyone guide me in the right direction here? TIA
I'm not opposed to not using official firmware, I think I use cyanogen mod(?) on my own phone. I'd just like the problem fixed in the easiest way possible.
Trying to fix it myself by flashing a rom via SP flash tools but I've ran into another problem which is stopping any kind of progress - the phone isn't detected in Windows, I can't enable usb debugging because I can't get passed the boot loop, I've tried installing the ADB driver manually which didn't seem to work (just said it didn't install correctly and left me with a yellow exclamation mark) and I tried to install it automatically via ADB driver installer but it just throws up an error that the device isn't detected.
Any help would be greatly appreciated.
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Same here - any solution for this problem?
Kleos89 said:
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Click to expand...
Click to collapse
guys i have big problem.
I flash this rom via twrp and add to the tree su and some other files like xpose.
After that I have brick my device.
When I push power it shows only for 1 s miui logo and after that red led is blinking.
When i plug it to my computer it shows that it couldn`t recognize the usb driver, when i go to the menager it shows that it is decrypted).
I could turn on fastboot mode but it not helping beacuse my comp doesn`t see device in fastoob/adb mode.. (i have good drivers - i do a lot of diferent flash by fastboot).
Maybe you have some advice for my problem. I loose TWRP ;( .....
I trie to disconect battery (open the body) but it not help.
Please hepl me!
http://www.tinypic.pl/y2rjc02j3h7u
Dinosek said:
guys i have big problem.
I flash this rom via twrp and add to the tree su and some other files like xpose.
After that I have brick my device.
When I push power it shows only for 1 s miui logo and after that red led is blinking.
When i plug it to my computer it shows that it couldn`t recognize the usb driver, when i go to the menager it shows that it is decrypted).
I could turn on fastboot mode but it not helping beacuse my comp doesn`t see device in fastoob/adb mode.. (i have good drivers - i do a lot of diferent flash by fastboot).
Maybe you have some advice for my problem. I loose TWRP ;( .....
I trie to disconect battery (open the body) but it not help.
Please hepl me!
Click to expand...
Click to collapse
This might help you http://en.miui.com/thread-235865-1-1.html
http://en.miui.com/thread-274589-1-1.html good luck
bigest problem i think is that that my computer can`t recognize phone. all the that it show that he can`t recognize usb. device.
even I want to use test point method but it doesn`t work for me I think - I want to connect first and last pin (it`s correct??)
in my device menager i have
http://www.tinypic.pl/y2rjc02j3h7u
I try I think every thing. With my computer and another. Bouth of them doesn`t recognize phone. I could only go to the fastoboot mode but comp don`t see it.
I try even deep flash...
Try to install driver mi
Sent from my Redmi Note 3 using Tapatalk
What I do
Change computer , reinstall drivers, unsuscribe drivers
Disconnect battery, di the test point
The bigest problem I thing right know I that that any computer doesn't see it. I do not understand why I always shows unknown device and info about description problem. I check it in one computer that one company change systems in selling xiaomi ( for sure good drivers)
I rescue my phone. What happend. I don't know how but my USB port was broken after last flashing by twrp. I change USB port and miflash start to see my device (funny is that computer doesn't saw it).
I unlock my device and flash in miflash stable miui.
Wysłane z mojego Redmi Note 3 przy użyciu Tapatalka
Hi,
I got my new phone a couple of days back, installed CM13 (officially unlocked, did that with TWRP + install ROM) probably incorrectly because i couldn't get the fingerprint sensor and other stuff to work at all.
Today my phone turned off by itself with around 70% of battery left and it's not responding anymore. Cannot go into Recovery mode, not even to Fastboot. Connected it to the charger and have the red light of the devil blinking... Tried to do everything i found online but i couldn't get into EDL mode (and then Flash through MiFlash), since fastboot is not working at all.
I really don't wanna have to open the back of the phone and. What can i do to save the phone? Is there any proven solution and a comprehensive guide to this (for a total idiot like me)?
Yes there is deep flash cable method search on xda/youtube it works like a charm,😉, this method saved me once
Try this (http://forum.xda-developers.com/redmi-note-3/how-to/guide-how-to-flash-hard-bricked-redmi-t3490055) works 100%
Try to disconnect and reconnect the battery.
This has kicked me into EDL mode once and after flashing it was fine
Both methods are sound, but if you decide to remove the back cover, remember to eject the SIM card tray first
Thanks for the replies, i was hoping i wouldn't have to have to open the back cover and disconnect the battery but it seems to be the only option at this point.
The deep flash cable doesn't seem that difficult tho, why don't you give it a shot? It seems like that's what they use at MI service centres after all.
So i have managed successfully to have the pc recognise the device as Qualcomm Hs USB Qdloader 9008, opened the MiFlash tool and recognised the device, but when i try to flash a stable MIUI rom i get an error: "Write timed out" as many times i tried to do it.
Does anybody have a suggestion?
My device was unlocked officially and i have no recovery no fastboot nothing at all.
alphax_ said:
So i have managed successfully to have the pc recognise the device as Qualcomm Hs USB Qdloader 9008, opened the MiFlash tool and recognised the device,
Click to expand...
Click to collapse
Which method you used - Deep Flash cable or Battery disconnect?
Yeah sorry i did not mention it, disconnected the battery.
i tried the battery removing method but the phone is not responding
now need to try cable method
Ryan Raghendh said:
i tried the battery removing method but the phone is not responding
now need to try cable method
Click to expand...
Click to collapse
Get into EDL
hey I am trying to flash bricked miA3 on miflash but it constantly given me error "cannot read from the port " can anyone help me what should to do I tried every port of my laptop but it sitill given me that error
You had to install qualcomm drivers for edl mode. Adb driver for fastboot. And put your phone into fastboot mode before connet to pc. Or will do not be recognized
wetito said:
You had to install qualcomm drivers for edl mode. Adb driver for fastboot. And put your phone into fastboot mode before connet to pc. Or will do not be recognized
Click to expand...
Click to collapse
my phone is bricked it does not come in fastboot mode I had accuatly install qualcomm driver to my pc but it still give me that error I open it from back and connect using two points from back but it still given me that error and one more thing I had unlocked its bootloader before bricked
Don't open phone! Simply use USB... Maybe you have made a damage now .. give the phone to a repair center is best solution for you, before hard damage the mother board .. if is not yet... good luck. In my opinion now the problem is not software. You have used a bad cable
Also you are using an old version of the mi flash, its from 2018....
Download Xiaomi Flash Tool 20210226 - Official Tool
Download the Official and Tested version of Xiaomi Flash Tool, i.e., Xiaomi Flash Tool 20210226 which allows you to Flash Stock Firmware on Xiaomi Devices.
xiaomiflashtool.com
heres the latest one
I Always used 2017 version. On windows 7 work fine
wetito said:
I Always used 2017 version. On windows 7 work fine
Click to expand...
Click to collapse
was just thinking about it because the Mi A3 came out in 2019
Another thing... If the phone don't enter in fastboot, mean that bootloader is damaged, probably you have flashed a wrong firmare... Have tried to convert to mc9e? Because with AOSP ROM is quite impossible to make an hard brick. The installing instructions are clear and simply. Now I'm running android 12 beta 3. I have never hard bricked my phone. And opening phone maybe have also caused an hardware damage. But I saw that win have installed the Qualcomm port. So maybe you are lucky. I suggest you use normal USB...and different versions of miflash. How Marvin suggested... For future, use edl mode with caution.
I have a question: what edl firmare you have? Are you sure is correct?