guys i have big problem.
I flash this rom via twrp and add to the tree su and some other files like xpose.
After that I have brick my device.
When I push power it shows only for 1 s miui logo and after that red led is blinking.
When i plug it to my computer it shows that it couldn`t recognize the usb driver, when i go to the menager it shows that it is decrypted).
I could turn on fastboot mode but it not helping beacuse my comp doesn`t see device in fastoob/adb mode.. (i have good drivers - i do a lot of diferent flash by fastboot).
Maybe you have some advice for my problem. I loose TWRP ;( .....
I trie to disconect battery (open the body) but it not help.
Please hepl me!
http://www.tinypic.pl/y2rjc02j3h7u
Dinosek said:
guys i have big problem.
I flash this rom via twrp and add to the tree su and some other files like xpose.
After that I have brick my device.
When I push power it shows only for 1 s miui logo and after that red led is blinking.
When i plug it to my computer it shows that it couldn`t recognize the usb driver, when i go to the menager it shows that it is decrypted).
I could turn on fastboot mode but it not helping beacuse my comp doesn`t see device in fastoob/adb mode.. (i have good drivers - i do a lot of diferent flash by fastboot).
Maybe you have some advice for my problem. I loose TWRP ;( .....
I trie to disconect battery (open the body) but it not help.
Please hepl me!
Click to expand...
Click to collapse
This might help you http://en.miui.com/thread-235865-1-1.html
http://en.miui.com/thread-274589-1-1.html good luck
bigest problem i think is that that my computer can`t recognize phone. all the that it show that he can`t recognize usb. device.
even I want to use test point method but it doesn`t work for me I think - I want to connect first and last pin (it`s correct??)
in my device menager i have
http://www.tinypic.pl/y2rjc02j3h7u
I try I think every thing. With my computer and another. Bouth of them doesn`t recognize phone. I could only go to the fastoboot mode but comp don`t see it.
I try even deep flash...
Try to install driver mi
Sent from my Redmi Note 3 using Tapatalk
What I do
Change computer , reinstall drivers, unsuscribe drivers
Disconnect battery, di the test point
The bigest problem I thing right know I that that any computer doesn't see it. I do not understand why I always shows unknown device and info about description problem. I check it in one computer that one company change systems in selling xiaomi ( for sure good drivers)
I rescue my phone. What happend. I don't know how but my USB port was broken after last flashing by twrp. I change USB port and miflash start to see my device (funny is that computer doesn't saw it).
I unlock my device and flash in miflash stable miui.
Wysłane z mojego Redmi Note 3 przy użyciu Tapatalka
Related
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
have you tried to re-install the Driver? make sure that you only use win 64 bit for flashing, many issues occurred when you try to flash using win 32 bit
I am using Windows 10 64 bit. Moreover, I have installed ADB drivers separately (although these seem to come with the Mi Flash utility too).
I think it's intended behavior not to be able to flash via Fastboot with the bootloader locked? I was hoping to be able to restore via Mi PC Suite but it can't seem to see the phone, although the computer does and Mi Flash does too.
try using Mi PC Suite, http://en.miui.com/thread-92720-1-1.html, After Mi PC Suite is installed, make sure that your phone is in fastboot mode, connect your phone to a computer, and select the correct ROM file to flash
"I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too)."
For some reason, Mi PC Suite is not detecting the phone.
Ultimatum99 said:
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
Hello there,
I faced the same situation, but unfortunately in download mode, the phone is not detected in MiFlash, it detected as QHSUSB_BULK in Windows. Phone is detected while in fastboot and normal mode, but not in download mode. Do you have any idea what to do?
I expect this is a driver issue, but I can't figure out what.. I'm using Windows 64 bit, disabled driver signature enforcement, and installed all driver from MiFlash installation (there were 3 of driver notification prompt).
noersetiawan said:
Hello there,
I faced the same situation, but unfortunately in download mode, the phone is not detected in MiFlash, it detected as QHSUSB_BULK in Windows. Phone is detected while in fastboot and normal mode, but not in download mode. Do you have any idea what to do?
I expect this is a driver issue, but I can't figure out what.. I'm using Windows 64 bit, disabled driver signature enforcement, and installed all driver from MiFlash installation (there were 3 of driver notification prompt).
Click to expand...
Click to collapse
You need to update QHSUSB_BULK to the Qualcomm driver.
Device Manager > Select QHSUSB_BULK > Update Driver Software > Find manually the location of the driver, most likely: C:\Program Files (x86)\Xiaomi\MiPhone\Qualcomm\Driver
The driver should now appear as Qualcomm something, and Mi Flash should be able to see the phone.
Does this work?
Ultimatum99 said:
You need to update QHSUSB_BULK to the Qualcomm driver.
Device Manager > Select QHSUSB_BULK > Update Driver Software > Find manually the location of the driver, most likely: C:\Program Files (x86)\Xiaomi\MiPhone\Qualcomm\Driver
The driver should now appear as Qualcomm something, and Mi Flash should be able to see the phone.
Does this work?
Click to expand...
Click to collapse
Hi,
Thank you for the help. Unfortunately it doesn't work straight away, fortunately this leads me to the right direction, after I tried to point the driver to Xiaomi directory, a window dialog says the driver is 32 bit thus noninstallable for my PC, then I looked around for 64 bit driver for Qualcomm, installed it. I can finally install the driver but the phone is detected as unknown USB device, after removing it from Device Manager, restarted my PC, and tried again, it's still the same, on the third try it finally detected properly. It's working now, thank you very much.
Really weird why did MiFlash comes with noninstallable driver.
Ultimatum99 said:
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
My 3s prime is locked bootloader, developer option off, oem disable thus not able to flash as device is in bootloop.
Garu8 said:
My 3s prime is locked bootloader, developer option off, oem disable thus not able to flash as device is in bootloop.
Click to expand...
Click to collapse
you have to flash in edl mode not fastboot so google on how to take redmi 3s into edl mode then you can flash the rom in locked bootloader.in redmi 3 we use volume up and volume down and power button.press all three at the same time and it will take u to edl mode.screen becomes all black but if you plug it to ur computer and press refresh in miflash then it will show as com 10 or 20.thats for redmi 3.maybe redmi 3s has the same steps
jokerpappu said:
you have to flash in edl mode not fastboot so google on how to take redmi 3s into edl mode then you can flash the rom in locked bootloader.in redmi 3 we use volume up and volume down and power button.press all three at the same time and it will take u to edl mode.screen becomes all black but if you plug it to ur computer and press refresh in miflash then it will show as com 10 or 20.thats for redmi 3.maybe redmi 3s has the same steps
Click to expand...
Click to collapse
I have already tried to switch to edl mode using cmd with "fastboot oem edl" command but it enter bootloop. It happen because oem is locked alongwith usb debugging as I didn't unlock developer option.
Garu8 said:
I have already tried to switch to edl mode using cmd with "fastboot oem edl" command but it enter bootloop. It happen because oem is locked alongwith usb debugging as I didn't unlock developer option.
Click to expand...
Click to collapse
then you should buy a usb cable which has a button in it which forces xiaomi devices to boot into edl mode.i forgot its name but i think you can google to find it
jokerpappu said:
then you should buy a usb cable which has a button in it which forces xiaomi deveot into edl mode.i forgot its name but i think you can google to find it
Click to expand...
Click to collapse
I believe you are talking about dfc a.k.a deep flash cable. I have searched alot I couldn't find it on any e-commerce site except alibaba which doesn't ship at my place. Can yousuggest any seller or website if you ever came across selling dfc cable? Deep flash method is the only last resort for my problem other than sending phone to service centre. Could you suggest any website to make dfc cable manually?;as I have searched youtube but non of the method mentioned in it seemed liable to me.
Garu8 said:
I believe you are talking about dfc a.k.a deep flash cable. I have searched alot I couldn't find it on any e-commerce site except alibaba which doesn't ship at my place. Can yousuggest any seller or website if you ever came across selling dfc cable? Deep flash method is the only last resort for my problem other than sending phone to service centre. Could you suggest any website to make dfc cable manually?;as I have searched youtube but non of the method mentioned in it seemed liable to me.
Click to expand...
Click to collapse
i saw it on ebay also.i think that seller will ship worldwide to any country.
here is the link
http://www.ebay.com/sch/i.html?_fro...le.TRS0&_nkw=xiaomi+deep+flash+cable&_sacat=0
You don't need deep flash cable use button combo to put in edl mode. From device manager update driver for QHSUSB_BULK. \After that reboot pc with driver signature disabled, then open mi flash and phone should be recognised. Just found the thread I used to remove vendor rom.
http://en.miui.com/thread-254606-1-1.html
JUST MAKE SURE YOU DOWNLOAD THE ROM FOR YOUR DEVICE!:crying:
jazz452 said:
You don't need deep flash cable use button combo to put in edl mode. From device manager update driver for QHSUSB_BULK. \After that reboot pc with driver signature disabled, then open mi flash and phone should be recognised. Just found the thread I used to remove vendor rom.
http://en.miui.com/thread-254606-1-1.html
JUST MAKE SURE YOU DOWNLOAD THE ROM FOR YOUR DEVICE!:crying:
Click to expand...
Click to collapse
As I have already said edl mode won't work since developers option was not activated as edl requires oem activated. I had already tried all the methods.
By the way thanks to u all at xda as I have successfully flashed new rom using deep flash cable method...
Nexus 10 rooted in a bootloop
Hi folks! I'm a newbie with this stuffs so I'll do my best to explain the issue. I've recently rooted my Nexus 10 with Nexus root toolkit 2.1.9( I believe). All was fine until I turn it off and back on. Now I'm in a bootloop. I could use the Unroot+flash command but my windows 7 won't detect the device. It only detect it when my tablet is connected and turn off. In that case shows as MTP. Can anyone help me reinstalling the driver or else? Thank you
Novice12 said:
Hi folks! I'm a newbie with this stuffs so I'll do my best to explain the issue. I've recently rooted my Nexus 10 with Nexus root toolkit 2.1.9( I believe). All was fine until I turn it off and back on. Now I'm in a bootloop. I could use the Unroot+flash command but my windows 7 won't detect the device. It only detect it when my tablet is connected and turn off. In that case shows as MTP. Can anyone help me reinstalling the driver or else? Thank you
Click to expand...
Click to collapse
Hi,
This is Redmi 3 section. The correct section for your device is here. Please explain your issue there. Good luck!
Sent from my Redmi 3 using XDA Labs
Unbrick Xiaomi Redmi 3s prime with unlocked boot loader
Hi all,
I've a Xiaomi redmi 3s prime with rooted and unlocked bootloader. I tried unrooting from SuperSu and the phone is in bootloop now. I had TWRP recovery mod installed and a nandroid back up in my phone. But, I can't even enter the recovery mode now. Fast boot is working. Please help me to unbrick it without losing the data or recover the nandroid back up at least.
Thanks!!
Ultimatum99 said:
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
look
you got bootloop and its very very different from brick
update your title
hey
im trying to flash global rom on my phone but i miflash does not seem to detect my phone.
i have tired reinstalling a miflash.
anyone have any ideas what could be the problem?
also could someone send me a link to a clean global rom as i my current rom has been tampered with and the seller has sent me a new rom to flash which i believe also may be tampered with..
Have you unlocked your bootloader yet?
Sent from my Redmi 3 using Tapatalk
GrimEire said:
hey
im trying to flash global rom on my phone but i miflash does not seem to detect my phone.
i have tired reinstalling a miflash.
anyone have any ideas what could be the problem?
also could someone send me a link to a clean global rom as i my current rom has been tampered with and the seller has sent me a new rom to flash which i believe also may be tampered with..
Click to expand...
Click to collapse
if you want to flash on locked bootloader then you need to be in edl mode not in fastboot mode.to be in edl mode turn off your phone.plug the usb cable to the computer.now get ready to to plug it into the phone but before that be ready to press both volume buttons.this is important step ok.keep your fingers on both volume up and down buttons.now as soon as you plug the usb cable into the phone press both volume buttons.then it will vibrate bt screen will be black.now open mi flash and see there it should show com 10 or com 20 or watever com something like that.then you are ready to flash the rom.after that i hope you know the steps after this.
jokerpappu said:
if you want to flash on locked bootloader then you need to be in edl mode not in fastboot mode.to be in edl mode turn off your phone.plug the usb cable to the computer.now get ready to to plug it into the phone but before that be ready to press both volume buttons.this is important step ok.keep your fingers on both volume up and down buttons.now as soon as you plug the usb cable into the phone press both volume buttons.then it will vibrate bt screen will be black.now open mi flash and see there it should show com 10 or com 20 or watever com something like that.then you are ready to flash the rom.after that i hope you know the steps after this.
Click to expand...
Click to collapse
On Windows you usually have to install drivers because windows usually don't recognize device as something connected through com port. This could be done through device manager, install drivers for unknown device, browse for location and they are in drivers directory in miflash directory.
Sent from my Redmi 3 using Tapatalk
kosiiik said:
On Windows you usually have to install drivers because windows usually don't recognize device as something connected through com port. This could be done through device manager, install drivers for unknown device, browse for location and they are in drivers directory in miflash directory.
Sent from my Redmi 3 using Tapatalk
Click to expand...
Click to collapse
I just let windows find the driver and they do.it automatically if u have internet connection ok.why work hard when it can be simple
It has never worked for me, but if it works for you, no problem
Sent from my Redmi 3 using Tapatalk
haha maybe i am lucky
my computer for some reason just detected the phone the first time i connected to it a few days later.
im having bigger issues now as the flashing took forever after about 12 hours it was still flashing so i unplugged it.
now my phone is bricked i think.
when trying to turn on the phone it is stuck at the mi mi.com logo
it stays there for a few minutes and then vibrates and goes black and starts again.
i can get into fastboot (volume down and power) but cant get into anything else.
You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-t...with-drivers-on-windows-quickest-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot
Redmi note4
kosiiik said:
On Windows you usually have to install drivers because windows usually don't recognize device as something connected through com port. This could be done through device manager, install drivers for unknown device, browse for location and they are in drivers directory in miflash directory.
Sent from my Redmi 3 using Tapatalk
Click to expand...
Click to collapse
Hello,
My Redmi Note 4 got Bootlooped,No Recovery No Rom and no way for Charging while pressing and hold the power button,there appeared one second blink of MI Logo.i tried all the ways to flash thro' fast boot mode.but remote partition flashing is no allowed.while tried to flash in edl mode,mi flash didn't detect the Driver.On Seeing device manager the it shows Qualcomm HS-USB Diagnostics 900E and not as Qualcomm HS-USB qdloader 9008.while upading driver it shows the best driver already installed.In my opnion due to Qualcomm HS-USB Diagnostics 900E ,mi flash didn't detect the driver.how can i switched up to Qualcomm HS-USB qdloader 9008.
device not showing in miflash tool in edl mode..
jokerpappu said:
if you want to flash on locked bootloader then you need to be in edl mode not in fastboot mode.to be in edl mode turn off your phone.plug the usb cable to the computer.now get ready to to plug it into the phone but before that be ready to press both volume buttons.this is important step ok.keep your fingers on both volume up and down buttons.now as soon as you plug the usb cable into the phone press both volume buttons.then it will vibrate bt screen will be black.now open mi flash and see there it should show com 10 or com 20 or watever com something like that.then you are ready to flash the rom.after that i hope you know the steps after this.
Click to expand...
Click to collapse
in edl mode device not showing in miflash tool ...
ManishOutlook said:
in edl mode device not showing in miflash tool ...
Click to expand...
Click to collapse
Make sure you have all tye drivers of ur device installed on ur pc and also latest miflash tool and try again
You can try a different usb cable
Hi,
i have the exact same problem. Device doesnt show in Mi Flash. Its the latest version, I installed the drivers and I can see the device in the device manager under Qualcomm HS-USB QDLoader 9008 (COM4). Anybody know a solution?
gottlobzufall said:
Hi,
i have the exact same problem. Device doesnt show in Mi Flash. Its the latest version, I installed the drivers and I can see the device in the device manager under Qualcomm HS-USB QDLoader 9008 (COM4). Anybody know a solution?
Click to expand...
Click to collapse
same problem, mi A2. Device is present in device manager like Qualcomm HS-USB but Mi flash dont show com port...
Max.Payne said:
same problem, mi A2. Device is present in device manager like Qualcomm HS-USB but Mi flash dont show com port...
Click to expand...
Click to collapse
you can use deep flash cable to solve the problem. also you can make the cable yourself. google it and see how to make and use.
rekh said:
you can use deep flash cable to solve the problem. also you can make the cable yourself. google it and see how to make and use.
Click to expand...
Click to collapse
Deepflash cabe not needed, i used tespoint to forse in qualcomm hsxxx mode, device is present in device manager but flasher can't see him. I solved phone on the same way on another computer. First is win7-64, second is win10-64, same program, drivers, flash file... I don't know why... but problem is solved...
How long should it take? Mine is taking very long. And will there be sounds playing of device disconnected and connected again?
Hey guys. I have kenzo on the latest stable rom and USB doesnt seem to be working. When I connect to my pc (WINDOWS 10 32-BIT) the phone charges but nothing else happens. There is no option to change to mtp mode on phone AND nothing shows up on my PC and nothing on device manager
How do I fix this because I want to unlock my bootloader in the future and if the PC cant detect my phone then I'm screwed. Thanks so much in advance
and yes, the mi flash tool, adb drivers, you call it, all is installed
Is your problem solved???
Is yes please tell me what you did.
Hello Guys,
I would like to flash a Redmi Note 3 pro with twrp.
The problem is it is not recognized by PC. It's not even showing anything in device Manager.
I installed usb drivers from Xiaomi, I booted to Fastboot Mode and connected the Phone to the PC. Nothing is happening. No device ist showing in device Manager.
I tried 3 different USB cables and also to connect it to a notebook instead using my PC. No Chance.
Then I tried to connect a Redmi Note 4X in Fastboot mode and the same happened. IT IS Not recognized and the device manager don't show a new device.
Both phones are officialy unlocked.
Anyone who faced the same problem and can help
Joe886 said:
Hello Guys,
I would like to flash a Redmi Note 3 pro with twrp. The problem is it is not recognized by PC. It's not even showing anything in device Manager. I installed usb drivers from Xiaomi, I booted to Fastboot Mode and connected the Phone to the PC. Nothing is happening. No device ist showing in device Manager. I tried 3 different USB cables and also to connect it to a notebook instead using my PC. No Chance. Then I tried to connect a Redmi Note 4X in Fastboot mode and the same happened. IT IS Not recognized and the device manager don't show a new device. Both phones are officialy unlocked. Anyone who faced the same problem and can help
Click to expand...
Click to collapse
Hi, so you have tried 2 PCs, 2 phones and 3 cables. I think you missed it in the Device Manager. Please connect your RN3P phone in fastboot mode and run http://www.uwe-sieber.de/usbtreeview_e.html then do File/Save full report, and post it here. Alternatively, run any live Linux and post lsusb output.
Thank you for your reply.
As it seems I can´t post links because i`m new and when I try to post the report here it says I can`t because it has more than 30000 caracters
But as I said it won´t be recognized. Both of them won`t.
When I connect them in working mode I can´t even access the data like pictures etc.
One of the 3 usb-cables were originaly packaged as I at first suspected the usb cables were faulty.
But now a friend of mine come by and I tested to connect his Redmi note 4x and it is working. The only difference is that he has miui 8 and I have miui 9 from xiaomi.eu.
So I am out of ideas now. The only I can imagine is that both usb ports on the smartphone are ****ed and therfore it won´t connect properly.
Charging is no problem by the way
Bro you have to setup adb drivers perfectly a single error in setting up leads error but no worry it would not harm your device....
So first of all setup adb driver from the given link it will show you how to setup adb driver
Then go your processor of setting up twrp.
If you need any help on setting up twrp just reply on it....
Hey, I need Some help ASAP, I am in a Big trouble. So The whole scenario is that I decided to install the Paranoid Android 11 in my Mi A3 and After Unlocking the Bootloader, I changed the Boot Slot from A to B and Flashed the Twrp file ( to the boot ) and Pressed the Power and Volume down Button, The Phone turned off and is not turning on Not Even the Fastboot Logo, Its Bricked. (Here are some additional Points Which you Should Know, 1. I checked the ports on my Computer and It was Showing Qualcomm HS-USB QDLoader 9008 So I think the phone is in EDL mode. 2. I tried to Flash Mi A3 Stock Firmware using Miflash and It was Showing Error "Cannot receive hello Packet") The Phone is my Daily Driver and If anyone can, Please help me Fix this.
Even I got the same issue after downloading the latest Android 11, then got rectified the Mobile through the nearest service center.
Globally many people experienced the same issue.
Now it is ok !
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
elprfesor said:
use qfile and service rom
set up in ufs mod
plug off battery and connct usb with short test point
load files 0/1/2/3/4/5 and
Click to expand...
Click to collapse
could you explain it more?
I also dead briked my phone after install a11 and used qfil to flash some stuff in edl mode using test points,
I recommend using the right qualcomm driver 32 or 64 bits like your OS and also reboot after install driver,
I don't recommend open the back painel bcs even u doing it right it don't close well after bcs lose stickiness,
If u can just go to a service, they can manage with this better then u.
Same here. Even opened the back cover to touch the EDL points.
Tried getting out of that mode by flashing to stock ROM using the Mi Flash Tool as I'm getting a weird error, `Input string was not in the correct format`. even when using the very same input as I've seen on a YouTube Tutorial & I had also tried it out on the very same version of Flash Tool (and still got the error)