miflash not detecting redmi 3 phone - Xiaomi Redmi 3 Questions & Answers

hey
im trying to flash global rom on my phone but i miflash does not seem to detect my phone.
i have tired reinstalling a miflash.
anyone have any ideas what could be the problem?
also could someone send me a link to a clean global rom as i my current rom has been tampered with and the seller has sent me a new rom to flash which i believe also may be tampered with..

Have you unlocked your bootloader yet?
Sent from my Redmi 3 using Tapatalk

GrimEire said:
hey
im trying to flash global rom on my phone but i miflash does not seem to detect my phone.
i have tired reinstalling a miflash.
anyone have any ideas what could be the problem?
also could someone send me a link to a clean global rom as i my current rom has been tampered with and the seller has sent me a new rom to flash which i believe also may be tampered with..
Click to expand...
Click to collapse
if you want to flash on locked bootloader then you need to be in edl mode not in fastboot mode.to be in edl mode turn off your phone.plug the usb cable to the computer.now get ready to to plug it into the phone but before that be ready to press both volume buttons.this is important step ok.keep your fingers on both volume up and down buttons.now as soon as you plug the usb cable into the phone press both volume buttons.then it will vibrate bt screen will be black.now open mi flash and see there it should show com 10 or com 20 or watever com something like that.then you are ready to flash the rom.after that i hope you know the steps after this.

jokerpappu said:
if you want to flash on locked bootloader then you need to be in edl mode not in fastboot mode.to be in edl mode turn off your phone.plug the usb cable to the computer.now get ready to to plug it into the phone but before that be ready to press both volume buttons.this is important step ok.keep your fingers on both volume up and down buttons.now as soon as you plug the usb cable into the phone press both volume buttons.then it will vibrate bt screen will be black.now open mi flash and see there it should show com 10 or com 20 or watever com something like that.then you are ready to flash the rom.after that i hope you know the steps after this.
Click to expand...
Click to collapse
On Windows you usually have to install drivers because windows usually don't recognize device as something connected through com port. This could be done through device manager, install drivers for unknown device, browse for location and they are in drivers directory in miflash directory.
Sent from my Redmi 3 using Tapatalk

kosiiik said:
On Windows you usually have to install drivers because windows usually don't recognize device as something connected through com port. This could be done through device manager, install drivers for unknown device, browse for location and they are in drivers directory in miflash directory.
Sent from my Redmi 3 using Tapatalk
Click to expand...
Click to collapse
I just let windows find the driver and they do.it automatically if u have internet connection ok.why work hard when it can be simple

It has never worked for me, but if it works for you, no problem
Sent from my Redmi 3 using Tapatalk

haha maybe i am lucky

my computer for some reason just detected the phone the first time i connected to it a few days later.
im having bigger issues now as the flashing took forever after about 12 hours it was still flashing so i unplugged it.
now my phone is bricked i think.
when trying to turn on the phone it is stuck at the mi mi.com logo
it stays there for a few minutes and then vibrates and goes black and starts again.
i can get into fastboot (volume down and power) but cant get into anything else.

You will need to flash a ROM using fastboot.
First install fastboot on your pc: http://www.theandroidsoul.com/how-t...with-drivers-on-windows-quickest-setup-75174/
Second Download a flashable Rom: http://en.miui.com/a-234.html (make sure to choose the right one)
Unzip the rom and navigate to the 'images' folder
Put the phone into Fastboot mode (volume down and power button together until fastboot appears)
Connect the phone to pc with USB
Shift Right click on a blank space in the folder and choose 'open command window here'
run the following commands. one at a time
fastboot devices
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash system system.img
fastboot reboot

Redmi note4
kosiiik said:
On Windows you usually have to install drivers because windows usually don't recognize device as something connected through com port. This could be done through device manager, install drivers for unknown device, browse for location and they are in drivers directory in miflash directory.
Sent from my Redmi 3 using Tapatalk
Click to expand...
Click to collapse
Hello,
My Redmi Note 4 got Bootlooped,No Recovery No Rom and no way for Charging while pressing and hold the power button,there appeared one second blink of MI Logo.i tried all the ways to flash thro' fast boot mode.but remote partition flashing is no allowed.while tried to flash in edl mode,mi flash didn't detect the Driver.On Seeing device manager the it shows Qualcomm HS-USB Diagnostics 900E and not as Qualcomm HS-USB qdloader 9008.while upading driver it shows the best driver already installed.In my opnion due to Qualcomm HS-USB Diagnostics 900E ,mi flash didn't detect the driver.how can i switched up to Qualcomm HS-USB qdloader 9008.

device not showing in miflash tool in edl mode..
jokerpappu said:
if you want to flash on locked bootloader then you need to be in edl mode not in fastboot mode.to be in edl mode turn off your phone.plug the usb cable to the computer.now get ready to to plug it into the phone but before that be ready to press both volume buttons.this is important step ok.keep your fingers on both volume up and down buttons.now as soon as you plug the usb cable into the phone press both volume buttons.then it will vibrate bt screen will be black.now open mi flash and see there it should show com 10 or com 20 or watever com something like that.then you are ready to flash the rom.after that i hope you know the steps after this.
Click to expand...
Click to collapse
in edl mode device not showing in miflash tool ...

ManishOutlook said:
in edl mode device not showing in miflash tool ...
Click to expand...
Click to collapse
Make sure you have all tye drivers of ur device installed on ur pc and also latest miflash tool and try again

You can try a different usb cable

Hi,
i have the exact same problem. Device doesnt show in Mi Flash. Its the latest version, I installed the drivers and I can see the device in the device manager under Qualcomm HS-USB QDLoader 9008 (COM4). Anybody know a solution?

gottlobzufall said:
Hi,
i have the exact same problem. Device doesnt show in Mi Flash. Its the latest version, I installed the drivers and I can see the device in the device manager under Qualcomm HS-USB QDLoader 9008 (COM4). Anybody know a solution?
Click to expand...
Click to collapse
same problem, mi A2. Device is present in device manager like Qualcomm HS-USB but Mi flash dont show com port...

Max.Payne said:
same problem, mi A2. Device is present in device manager like Qualcomm HS-USB but Mi flash dont show com port...
Click to expand...
Click to collapse
you can use deep flash cable to solve the problem. also you can make the cable yourself. google it and see how to make and use.

rekh said:
you can use deep flash cable to solve the problem. also you can make the cable yourself. google it and see how to make and use.
Click to expand...
Click to collapse
Deepflash cabe not needed, i used tespoint to forse in qualcomm hsxxx mode, device is present in device manager but flasher can't see him. I solved phone on the same way on another computer. First is win7-64, second is win10-64, same program, drivers, flash file... I don't know why... but problem is solved...

How long should it take? Mine is taking very long. And will there be sounds playing of device disconnected and connected again?

Related

[SOLVED] Unbrick with locked bootloader

As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
have you tried to re-install the Driver? make sure that you only use win 64 bit for flashing, many issues occurred when you try to flash using win 32 bit
I am using Windows 10 64 bit. Moreover, I have installed ADB drivers separately (although these seem to come with the Mi Flash utility too).
I think it's intended behavior not to be able to flash via Fastboot with the bootloader locked? I was hoping to be able to restore via Mi PC Suite but it can't seem to see the phone, although the computer does and Mi Flash does too.
try using Mi PC Suite, http://en.miui.com/thread-92720-1-1.html, After Mi PC Suite is installed, make sure that your phone is in fastboot mode, connect your phone to a computer, and select the correct ROM file to flash
"I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too)."
For some reason, Mi PC Suite is not detecting the phone.
Ultimatum99 said:
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
Hello there,
I faced the same situation, but unfortunately in download mode, the phone is not detected in MiFlash, it detected as QHSUSB_BULK in Windows. Phone is detected while in fastboot and normal mode, but not in download mode. Do you have any idea what to do?
I expect this is a driver issue, but I can't figure out what.. I'm using Windows 64 bit, disabled driver signature enforcement, and installed all driver from MiFlash installation (there were 3 of driver notification prompt).
noersetiawan said:
Hello there,
I faced the same situation, but unfortunately in download mode, the phone is not detected in MiFlash, it detected as QHSUSB_BULK in Windows. Phone is detected while in fastboot and normal mode, but not in download mode. Do you have any idea what to do?
I expect this is a driver issue, but I can't figure out what.. I'm using Windows 64 bit, disabled driver signature enforcement, and installed all driver from MiFlash installation (there were 3 of driver notification prompt).
Click to expand...
Click to collapse
You need to update QHSUSB_BULK to the Qualcomm driver.
Device Manager > Select QHSUSB_BULK > Update Driver Software > Find manually the location of the driver, most likely: C:\Program Files (x86)\Xiaomi\MiPhone\Qualcomm\Driver
The driver should now appear as Qualcomm something, and Mi Flash should be able to see the phone.
Does this work?
Ultimatum99 said:
You need to update QHSUSB_BULK to the Qualcomm driver.
Device Manager > Select QHSUSB_BULK > Update Driver Software > Find manually the location of the driver, most likely: C:\Program Files (x86)\Xiaomi\MiPhone\Qualcomm\Driver
The driver should now appear as Qualcomm something, and Mi Flash should be able to see the phone.
Does this work?
Click to expand...
Click to collapse
Hi,
Thank you for the help. Unfortunately it doesn't work straight away, fortunately this leads me to the right direction, after I tried to point the driver to Xiaomi directory, a window dialog says the driver is 32 bit thus noninstallable for my PC, then I looked around for 64 bit driver for Qualcomm, installed it. I can finally install the driver but the phone is detected as unknown USB device, after removing it from Device Manager, restarted my PC, and tried again, it's still the same, on the third try it finally detected properly. It's working now, thank you very much.
Really weird why did MiFlash comes with noninstallable driver.
Ultimatum99 said:
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
My 3s prime is locked bootloader, developer option off, oem disable thus not able to flash as device is in bootloop.
Garu8 said:
My 3s prime is locked bootloader, developer option off, oem disable thus not able to flash as device is in bootloop.
Click to expand...
Click to collapse
you have to flash in edl mode not fastboot so google on how to take redmi 3s into edl mode then you can flash the rom in locked bootloader.in redmi 3 we use volume up and volume down and power button.press all three at the same time and it will take u to edl mode.screen becomes all black but if you plug it to ur computer and press refresh in miflash then it will show as com 10 or 20.thats for redmi 3.maybe redmi 3s has the same steps
jokerpappu said:
you have to flash in edl mode not fastboot so google on how to take redmi 3s into edl mode then you can flash the rom in locked bootloader.in redmi 3 we use volume up and volume down and power button.press all three at the same time and it will take u to edl mode.screen becomes all black but if you plug it to ur computer and press refresh in miflash then it will show as com 10 or 20.thats for redmi 3.maybe redmi 3s has the same steps
Click to expand...
Click to collapse
I have already tried to switch to edl mode using cmd with "fastboot oem edl" command but it enter bootloop. It happen because oem is locked alongwith usb debugging as I didn't unlock developer option.
Garu8 said:
I have already tried to switch to edl mode using cmd with "fastboot oem edl" command but it enter bootloop. It happen because oem is locked alongwith usb debugging as I didn't unlock developer option.
Click to expand...
Click to collapse
then you should buy a usb cable which has a button in it which forces xiaomi devices to boot into edl mode.i forgot its name but i think you can google to find it
jokerpappu said:
then you should buy a usb cable which has a button in it which forces xiaomi deveot into edl mode.i forgot its name but i think you can google to find it
Click to expand...
Click to collapse
I believe you are talking about dfc a.k.a deep flash cable. I have searched alot I couldn't find it on any e-commerce site except alibaba which doesn't ship at my place. Can yousuggest any seller or website if you ever came across selling dfc cable? Deep flash method is the only last resort for my problem other than sending phone to service centre. Could you suggest any website to make dfc cable manually?;as I have searched youtube but non of the method mentioned in it seemed liable to me.
Garu8 said:
I believe you are talking about dfc a.k.a deep flash cable. I have searched alot I couldn't find it on any e-commerce site except alibaba which doesn't ship at my place. Can yousuggest any seller or website if you ever came across selling dfc cable? Deep flash method is the only last resort for my problem other than sending phone to service centre. Could you suggest any website to make dfc cable manually?;as I have searched youtube but non of the method mentioned in it seemed liable to me.
Click to expand...
Click to collapse
i saw it on ebay also.i think that seller will ship worldwide to any country.
here is the link
http://www.ebay.com/sch/i.html?_fro...le.TRS0&_nkw=xiaomi+deep+flash+cable&_sacat=0
You don't need deep flash cable use button combo to put in edl mode. From device manager update driver for QHSUSB_BULK. \After that reboot pc with driver signature disabled, then open mi flash and phone should be recognised. Just found the thread I used to remove vendor rom.
http://en.miui.com/thread-254606-1-1.html
JUST MAKE SURE YOU DOWNLOAD THE ROM FOR YOUR DEVICE!:crying:
jazz452 said:
You don't need deep flash cable use button combo to put in edl mode. From device manager update driver for QHSUSB_BULK. \After that reboot pc with driver signature disabled, then open mi flash and phone should be recognised. Just found the thread I used to remove vendor rom.
http://en.miui.com/thread-254606-1-1.html
JUST MAKE SURE YOU DOWNLOAD THE ROM FOR YOUR DEVICE!:crying:
Click to expand...
Click to collapse
As I have already said edl mode won't work since developers option was not activated as edl requires oem activated. I had already tried all the methods.
By the way thanks to u all at xda as I have successfully flashed new rom using deep flash cable method...
Nexus 10 rooted in a bootloop
Hi folks! I'm a newbie with this stuffs so I'll do my best to explain the issue. I've recently rooted my Nexus 10 with Nexus root toolkit 2.1.9( I believe). All was fine until I turn it off and back on. Now I'm in a bootloop. I could use the Unroot+flash command but my windows 7 won't detect the device. It only detect it when my tablet is connected and turn off. In that case shows as MTP. Can anyone help me reinstalling the driver or else? Thank you
Novice12 said:
Hi folks! I'm a newbie with this stuffs so I'll do my best to explain the issue. I've recently rooted my Nexus 10 with Nexus root toolkit 2.1.9( I believe). All was fine until I turn it off and back on. Now I'm in a bootloop. I could use the Unroot+flash command but my windows 7 won't detect the device. It only detect it when my tablet is connected and turn off. In that case shows as MTP. Can anyone help me reinstalling the driver or else? Thank you
Click to expand...
Click to collapse
Hi,
This is Redmi 3 section. The correct section for your device is here. Please explain your issue there. Good luck!
Sent from my Redmi 3 using XDA Labs
Unbrick Xiaomi Redmi 3s prime with unlocked boot loader
Hi all,
I've a Xiaomi redmi 3s prime with rooted and unlocked bootloader. I tried unrooting from SuperSu and the phone is in bootloop now. I had TWRP recovery mod installed and a nandroid back up in my phone. But, I can't even enter the recovery mode now. Fast boot is working. Please help me to unbrick it without losing the data or recover the nandroid back up at least.
Thanks!!
Ultimatum99 said:
As the title reads, I am stuck in a bootloop I guess coming from uninstalling more system apps than was probably wise.
I tried to flash via Mi Flash but I get a "can't flash a locked phone" error.
I also tried to connect to Mi PC Suite on Fastboot but it doesn't recognize the phone as connected (although the PC itself does and Mi Flash did too).
What options do I have?
Much appreciated,
Ultimatum
SOLUTION:
Download latest Fastboot ROM and decompress
Download and install MiFlash
Open MiFlash
Shut down the phone
Power on with Power + Vol Up.
Download Mode
Connect phone to computer, let it install the drivers if necessary
Refresh MiFlash, phone should show up (for me, Device showed as COM 10)
Browse the ROM
Tick Flash all except data and storage
Advanced > clear nvflash_all.bat
Flash
Enjoy!
Credit goes to Robertmvp
Click to expand...
Click to collapse
look
you got bootloop and its very very different from brick
update your title

How to Revert back to global rom

Hi,
I am currently on China Developer Rom, how can I go back to global stable rom. Currently my device bootloader is locked :crying:
https://www.youtube.com/watch?v=KzNTxRVF0pI
follow this guide how to flash fastboot roms with a locked bootloader
rhimezz said:
https://www.youtube.com/watch?v=KzNTxRVF0pI
follow this guide how to flash fastboot roms with a locked bootloader
Click to expand...
Click to collapse
I do exaclty what the video says. Pressing the volume + and volume - together only redirects me on test mode. Do you know what else i can do? I want global stable back..
If your phone is redmi note 3 pro, aka with qualcomm cpu, follow this post : http://en.miui.com/thread-235865-1-1.html
if it is with mtk cpu, follow this post: http://en.miui.com/thread-279784-1-1.html
sunvv said:
If your phone is redmi note 3 pro, aka with qualcomm cpu, follow this post : http://en.miui.com/thread-235865-1-1.html
if it is with mtk cpu, follow this post: http://en.miui.com/thread-279784-1-1.html
Click to expand...
Click to collapse
Nothing works.. keep entering test mode, after a short red blink :/
Aristalex said:
I do exaclty what the video says. Pressing the volume + and volume - together only redirects me on test mode. Do you know what else i can do? I want global stable back..
Click to expand...
Click to collapse
in ADB with USB-debugging on you can write "adb reboot edl" in command promt and it should make your phone reboot to download mode.
download mode is the screen off and the LED is just blinking red.
Flash with MiFlash the rom you want?
If all drivers are installed on your pc(adb&fastboot) open adb cmd tool and type : Adb reboot edl
whith your phone on
In_a_state said:
Flash with MiFlash the rom you want?
Click to expand...
Click to collapse
I cant because phone isn't recognised from miflash. I can only enter fastboot mode but cant flash with locked bl. :/
Also reboot edl doesnt work because pc doesn't recognise my phone.
it's not clear what "not recognize your phone" looks like, but let's try these simplified steps.
prerequisite: your phone is redmi note 3 pro (qualcomm cpu), windows 64bit, mi flash version 20160401, you've downloaded fastboot ROM.
step 1 install mi flash on your pc
step 2 reboot your pc
step 3 enable usb debugging on your phone
step 4 connect your phone to your pc
step 5 in command windows, run adb devices
step 6 authorize your pc on your phone
step 7 in command windows, run adb reboot edl
step 8 launch miflash
step 9 choose rom
step 10 flash
Check device manager in your pc and report back on whether it shows your phone under portas as Qualcomm 9008 port or 900e port (try and enter edl mode with the button press trick).
sunvv said:
it's not clear what "not recognize your phone" looks like, but let's try these simplified steps.
prerequisite: your phone is redmi note 3 pro (qualcomm cpu), windows 64bit, mi flash version 20160401, you've downloaded fastboot ROM.
step 1 install mi flash on your pc
step 2 reboot your pc
step 3 enable usb debugging on your phone
step 4 connect your phone to your pc
step 5 in command windows, run adb devices
step 6 authorize your pc on your phone
step 7 in command windows, run adb reboot edl
step 8 launch miflash
step 9 choose rom
step 10 flash
Click to expand...
Click to collapse
By saying my pc doesn't recognise the phone i mean that when i have the device powered on an then connect it to the pc, nothing happens. its like connecting the phone with a usb cable and not connecting the other side with the pc. Like the pc isn't powered on. That's why i can't run adb devices and furthermore reboot edl. Also i can't access usb mode in 6.5.12 stable dev rom, through settings and every app that i checked. Its like the usb mode selector app crashes. sorry for my english... i hope you understand me
Aristalex said:
By saying my pc doesn't recognise the phone i mean that when i have the device powered on an then connect it to the pc, nothing happens. its like connecting the phone with a usb cable and not connecting the other side with the pc. Like the pc isn't powered on. That's why i can't run adb devices and furthermore reboot edl. Also i can't access usb mode in 6.5.12 stable dev rom, through settings and every app that i checked. Its like the usb mode selector app crashes. sorry for my english... i hope you understand me
Click to expand...
Click to collapse
while, did you follow what I've written?
or maybe you can try these first: factory reset your phone, then when you connect your phone to pc, you should use the original usb cable coming with your phone, do not use other usb cable even it worked for other phones.
then follow steps I've mentioned.
if successful, after step 7, you should see this in device manager windows.
http://imgur.com/hq9ocjB
sunvv said:
while, did you follow what I've written?
or maybe you can try these first: factory reset your phone, then when you connect your phone to pc, you should use the original usb cable coming with your phone, do not use other usb cable even it worked for other phones.
then follow steps I've mentioned.
if successful, after step 7, you should see this in device manager windows.
http://imgur.com/hq9ocjB
Click to expand...
Click to collapse
Thanks for replying. My phone finally decided to be nice and when I connected it to my USB 3.0 port on my laptop and powered it on just installed mtp drivers and finally worked like a charm. It charges it can be recognised by PC. I installed global stable ROM now and I am fine. thanks for your time.
Aristalex said:
I cant because phone isn't recognised from miflash. I can only enter fastboot mode but cant flash with locked bl. :/
Also reboot edl doesnt work because pc doesn't recognise my phone.
Click to expand...
Click to collapse
It seems to be a driver issue, installing MI pc suit will install all needed drivers.
PS: sorry I didn't see the later posts and you were able to resolve your issue
Sent from my kenzo using Tapatalk

hard brick or soft brick. need help

hey everyone, flashed the cwm recovery which i found someware and the source were saying the it meant for all devices. but npw my phone does not go to fastnoot nor to recovery mode.
But, whenever i connect it to pc the the red noti. red light blinks and device name qualcomm 900e shows up in device manager. also waiting for device in adb. is there any way to revive my phone???:crying: :crying:
Try flashing a fastboot rom using MI flash tool beta.The red light shows that it is in edl mode.
GNVM said:
Try flashing a fastboot rom using MI flash tool beta.The red light shows that it is in edl mode.
Click to expand...
Click to collapse
flashtool does not recognize the device.
also in adb there is no device in list?
jobangill99 said:
flashtool does not recognize the device.
also in adb there is no device in list?
Click to expand...
Click to collapse
Try miflash to flash a new rom. If this does not work, then remove the back panel of you phone and disconnect the battery cable. Watch video on youtube for help. After that leave the phone disconnected for 30 mins and then reconnect it. Press vol down and power and you should be able to enter fastboot mode.
If nothing works go for test point method. see videos for better understanding.

NOTE 3 kenzo (hennesey rom)

Hi,
I start with flashing RM3 kenzo, my brother don´t tell me that he has kenzo, so i flash hennesey via SP-FLASH.
Phone don´t start, just black screen, I wanted to recovery via EDL, but I am confused, Its possible now ?
If I plug phone to PC, device manager is showing loop of:
Mediatek Preloader usb VCOM
USB serial device
There is a way to recovery it ?
THANKS
try use miFlash, if your device is detected (COM?) you may flash the right ROM
ridsa said:
try use miFlash, if your device is detected (COM?) you may flash the right ROM
Click to expand...
Click to collapse
phone is in loop, device manager show MEdiatek usb port, after 1s Mediatek preloader vcom usb, after 1s nothing and again again.
Miflash dont show any device
Can i get to Qualcomm HSUSB QLoader 9008 ?
If it show mediatek preloader ? Is HSUSB QLoader definitely lost?
THANKS
Is it phone still can accessing fastboot mode..?,
you can try press and holding vol down plus power button to force rebooting into fastboot mode..then try reboot into EDL mode from fastboot with this method here,
If success go into EDL mode..you can continue flashing with miflash tool.
No it´s not, I am trying get to EDL mode with EDL cable, but windows say unrecognized drivers and after 2s phone detach, in device manager see nothing.

Remdi Note 3 (kenzo) completely dead

Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
Try again to boot in fastboot mode by pressing vol down + power button for 10 to 20 second if booted into fastboot then release buttons
Try to unlock your device from mi unlock tool
Then it must boot
Try going to Fastboot Mode using Power Button and Vol Down. If you can go to Fastboot, then I'm pretty sure you'll be able to go to EDL Mode. Just look up online how to go to EDL Mode from Fastboot. I think the command to be typed in the cmd window is 'fastboot reboot edl'.
If that works, and you have your Qualcomm drivers installed, you should be able to flash a Fastboot ROM using Mi Flash Tools.
Cheers!
[email protected] said:
Try again to boot in fastboot mode by pressing vol down + power button for 10 to 20 second if booted into fastboot then release buttons
Try to unlock your device from mi unlock tool
Then it must boot
Click to expand...
Click to collapse
I can't seem to get to fastboot or recovery using the button combinations.
It does not even power on, even though i have charged for 8 hours now.
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
manakmishra said:
I can't seem to get to fastboot or recovery using the button combinations.
It does not even power on, even though i have charged for 8 hours now.
Click to expand...
Click to collapse
Open kenzo a.k.a. redmi note 3 disconnect battery
Then connect USB just to mobile not to PC
Then connect battery don't press any button
Connect USB to PC while pressing volume up button
Start mi flash tool click on refresh button see if it detects.
Start flash
manakmishra said:
Before I begin I want to say I'm new to the XDA community, so thank you in advance.
I flashed miui 8.0.1.0 stable rom using miflash. it showed success and so i went forward to reboot my device (still connected to the computer). it displayed the mi logo for about 2s and then went completely black with the red led blinking. i went to device manager to check the port(COM), it showed (still showing) Qualcomm HS-USB Diagnostics 900E. i disconnected the device, the led stopped blinking.
Also i don't have access to either the recovery nor the bootloader.
Here's what i had tried -
1) I tried installing the qualcomm HS-USB QDLoader 9008 drivers, it installed but the device is not detected by miflash.
2) I also tried going to edl mode by reconnecting the battery and usb connection, still no luck.
P.S. I had previously unlocked the bootloader officially.
please help.
Click to expand...
Click to collapse
Simply do this : https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Then flash latest global dev rom in Miflash (refresh when phone isn't detected http://en.miui.com/a-234.html
since you can't boot, it might be worth your time to take a look at this.
https://forum.xda-developers.com/redmi-note-3/how-to/guide-how-to-flash-hard-bricked-redmi-t3490055
It's a tutorial to make a 'deep-flash' cable using a micro usb cable that will force your device into fastboot mode, much like samsung's USB jig.
If that works, then you can try following this tutorial :
http://en.miui.com/thread-235865-1-1.html
You can use the link given in post #6 to boot to edl, then flash a stock MIUI ROM using MiFlash.
If all else fails, it might be time to consider taking it to the Mi service centre.

Categories

Resources