Hello,
During the past days I've been trying to flash my C7 with no success. When pressing power button, it turns on and displays the Alcatel logo but stays there, it does not load the OS.
I have tried to use SPtools to flash it, I have the mtk drivers installed in my PC. When I plug the switched-off phone to the computer it turns on and couple seconds after my PC detects it (I can see the preloader mtk loaded on the device manager); however, one second right after it is detected, it is disconnected as it keeps booting to show the logo and stay there. Obviously, if the phone is not detected I cannot use SPtools to flash it.
Any suggestion will be highly appreciated.
PS: I have also tried to connect to it with adb, and dump a ROM using sideload with no sucess, the PC recognizes it from the recovery but after copying the image nothing new happens on reboot.
Related
I have a problem with my xt615,
it started out with the bootloop problem.
after that i managed to get into flash mode (redscreen) installed the pc drivers
and tried to flash 2-3 different stock roms, and a recovery via RSD LITE version 6.
at the beginning the phone was recognized as a zeus flash device, but i changed that driver to a motorola usb device.
somehow i manage to get the phone connected in the FLASH MSM7227 but still no program can recognize it so i can flash...
since i tried to flash the recovery i cannot enter the Flash mode (red screen) and earlier, when i was trying to turn on the devices from 50power attempts 2 times it was the moto bootloop logo...
now i cannot do that...
any suggestions how to get this device flashed!?or get it into flash mode?!
all the time its blackscreen and as i enter the usb it connects to the pc depends on which mode...when i hold the powerbutton and connect it it will connect as flash device msm7227 but still...i cannot do anything via RSD LITE , also tried via adb to get it recognized. but no luck...
Help desperatly needed
Hello!
I can't install USB driver, and also can't get into recovery. Phone is working, but... When I connect the phone to computer the device manager shows nothing. With battery plugged in it shows 9520, but that is not helpfull in any way... Also when I'm trying to get into recovery mode, it's showing the loading android and after few seconds there is android laying with a red triangle with exclamation mark in it. I have flashed the official ROM with SP Flashtool but nothing changed. Is there any possibility to install the driver manually, not through the device manager? And how do I get the recovery to work again?
Hi all, I have a Lenovo P780 4GB that I flashed successfully with SPFT, P780_S125_130529 ROM from needrom.com. from there the phone will not boot but I can see is a red led charging light glowing while connecting it to a computer or charger. The device is not getting recognized by VCOM drivers so no use with flash tool any more. the only thing I see from Device manager is Alcatel Single RNDIS Interface #2. when I plug the phone to the computer I can hear the device connected/disconnected sound, Tried to reboot in to recovery and meta mode but the phone simply does not turn on. Anyone knows how to fix this problem?
Is there any other way I can get the device to change modes or rather a way to get it to be recognized by the PC?
a solution to fix the device will be the best.
Thanx for the help
I bricked my phone while installing official update from system update. I tried to flash it with SP flash tool, loaded the scatter, formatted it and then clicked Download with Da Dl...
my phone was detected and started downloading but it wasn't writting the preloader, it was stuck in 0%.
So I reattached the USB cable but alas, My computer culdn't recognize it. Windows says "USB Device not recognized"
I tried 3 different computers, uninstalled every driver with USBdeview. reinstalled them. But nothing changed. Tried pressing power and volume buttons combo. Nothing happened.
What to do now?
N.B. I flashed it with same scatter & firmware before. It was ok then, but last time it bricked.
Device: Lenovo S850
MT6582
Hi , my x96Air v2, 4/32 is stuck on logo and i cant access recovery mode to do a hard reset , is there any solution ?
and can anyone help me please.
PS i can flash roms using the sd card or Amlogic usb burning tool.
I also have an X96Air, 4/32....
After flasching my Image nothing happens on startup.
It takes a while until the logo appears. This is when the device comes to the emergency upload mode. This is the moment where the device becomes recognized by the usb burning tool from amlogic. (when drivers are correctly installed)
Be patient... after fail boots my device always comes back to an emergency upload mode after some time.
Stil searching the Backup of the Device with AM7256 Wifi chip. Have you this Backup?
rogi1 said:
I also have an X96Air, 4/32....
After flasching my Image nothing happens on startup.
It takes a while until the logo appears. This is when the device comes to the emergency upload mode. This is the moment where the device becomes recognized by the usb burning tool from amlogic. (when drivers are correctly installed)
Be patient... after fail boots my device always comes back to an emergency upload mode after some time.
Stil searching the Backup of the Device with AM7256 Wifi chip. Have you this Backup?
Click to expand...
Click to collapse
no i don't have it sorry