The 920 feels really slippery to be. I'm sure I'll drop it at some point when using it one-handed.
I don't want a big protective case, but just something to add texture to the back of the phone.
Is there some kind of texturized skin I could stick on? (Ideally with no residue if I remove it)
Or some other rubber that would stick on the back?
Or even a really thin silicon case?
I can't be the only one with this problem, has anyone else noticed this and found a good solution?
mattsnowboard said:
The 920 feels really slippery to be. I'm sure I'll drop it at some point when using it one-handed.
I don't want a big protective case, but just something to add texture to the back of the phone.
Is there some kind of texturized skin I could stick on? (Ideally with no residue if I remove it)
Or some other rubber that would stick on the back?
Or even a really thin silicon case?
I can't be the only one with this problem, has anyone else noticed this and found a good solution?
Click to expand...
Click to collapse
I agree that the phone is slippery ... and I started by using a gel case ... which worked, and it had knobby grips on the edges of the case -- and that worked very well to stop dropping the phone (I did that several times before I put the case on it).
Then I tried a phone with the Nokia CC-1043 case ... but that also was too slippery for me. I tried some egrip (they are non sticky things that will "stick" to most any surface ... and if you want something on the back of the phone -- there are pads that are 1" by 2" (about) that would work. However, for me, I wanted something on the edges -- so that I could get it out on the vertical holster that I use. The egrips on the edges did not stay formed along the curve of the case ... so I modified the CC-1043 with some grooves on the edges -- which really works great!
I was going to post some pictures, but I don't have access to a web site for the insertion ... If you send me a private message, I can send you the pictures ...
The grooves were made using a bandsaw with a block of wood taking the place of the phone to provide stability to the case as it was cut ... and there was a block of wood to stop how far into the blade that the case would go, and resulted in a cut that is about 1/2 mm deep ... it provides enough grip to grab the phone out of the case and while holding it -- most of what my hand / fingers are touching are the edges of the phone ...
It depends on which color you have. The blue and red are not as slippery. But I have Ghost armor on mine and it gives it a slightly tacky feel in addition to protecting it from scratches. Mine is red.
I have the black one (matte finish).
Is this the egrips you mentioned? http://www.egrips.com/
It sounds like that might be too much grip. I don't want to have trouble getting the phone into/out of my pocket. I just want more grip so that I don't constantly feel like it's going to fly out of my hand.
I looked at the case you mentioned here and it sounds good: http://www.amazon.com/Nokia-02733P4-CC-1043-Cover-Lumia/dp/B009T8YXCA but having some texture built-in would be nice (as opposed to your DIY grooves).
So I looked at related products and found the following:
http://www.amazon.com/Worldshopping-Black-Matte-Quicksand-Accessories/dp/B00A1Z3U3S/ref=pd_sim_cps_7
http://www.amazon.com/JKase-Premium-Quality-Nokia-Streamline/dp/B00A1UPHYS/ref=pd_sim_cps_17 (the sides of this seem ideal)
http://www.amazon.com/Fosmon-Series-Protective-Nokia-Lumia/dp/B009YLCFZY/ref=pd_sim_cps_3 (don't like the color)
http://www.amazon.com/NOKIA-LUMIA-HYBRID-RUBBERISED-COVER/dp/B009YB0P5G/ref=sr_1_1 (mentioned by a reviewer above)
Can anyone speak for those cases? Probably going to make a decision between those 5 in a day or so.
I had a case like the JKase ... and it is OK, but it adds some noticeable weight to the phone ... it is the one with knobby sides ... it has a very thin strip along the front-bottom of the case that is along the micro USB connector and the speakers ... it never was straight, but it also didn't seem to provide much function ... read other posts that said that they cut it off ...
Don't know about the other cases ...
The egrips link that you have are the ones that I tried ... I always use a case and never just in the pocket -- so I don't know if it would cause a problem ...
Like I said, I like the Nokia case after the modification ... before it, it was still at risk of being dropped ...
mattsnowboard said:
The 920 feels really slippery to be. I'm sure I'll drop it at some point when using it one-handed.
I don't want a big protective case, but just something to add texture to the back of the phone.
Is there some kind of texturized skin I could stick on? (Ideally with no residue if I remove it)
Or some other rubber that would stick on the back?
Or even a really thin silicon case?
I can't be the only one with this problem, has anyone else noticed this and found a good solution?
Click to expand...
Click to collapse
The cc-1043 cases is matte see my ebay sale!
Electrical tape to a thin plastic case.
Simple, thin, and adds a lot of grip. However, it can cause issues if you work in a very hot environment as the tape will goop and slip. Otherwise, I do this with almost all of my devices.
Add texture to slippery cell phone
To make your phone less slippery, you can add textured stickers to it. The kind that you would put on the bottom of the bathtub to prevent slips.
I bought some good ones at Bed, Bath, and Beyond. You can cut them into any shape you want. They were actually shaped like fish. I cut them into strips and put a few on the back of the phone and on the sides.
You can find them in many colors.
Amazon has a good selection.
Surprised nobody has mentioned Ghost Armor. It's perfect for what you want.
I bought their MatteArmor for the back of my Samsung Galaxy tablet and to provide a matte finish instead of it's slippery plastic.
Increased holdability (made up word lol) and maintains the look of the device because it's transparent and thin.
It's that good I paid to have it shipped from the USA to UK. Lifetime warranty, 30 day money-back guarantee
Here's a link to the Lumia range but they do literally any device.
Just bought silicone case from dx.com. Transparent, back side is matted. Not bad for this price, but flash working incorrect - fills all the frame because case scatters light
I'm a a sailing captain and watch people dropping their phones all the time, breaking glass and going overboard. I looked for a solution and couldn't find on that fit the bill as being easy to use, no installation, fits most phones and cases, so I invented one for me. People wanted one, so I patented it and just started production. Just search CellGrasp in google. You'll find me. Drop me a note and you can check it out at the site. Dropping cell phones is a real and growing problem. CellGrasp is a device that is a solution to the problem. Simple, easy, secure, better pics and vids instantly. Just for your information...
Related
I've always wondered how it would look on our DNA's after seeing the nexus 4 put in a bumper case I'm really interested in seeing some for our phones. Although this is unlikely what do you guys think?
I would love to see one
I have made my own so many times for phones. I made my own Nexus 4 one (Before we had poetic) and I made my own SGS 1,2,3 Bumpers. I just use a cheap and tight TPU case (USually the ones with the "S" design on the back) draw my design on it then cut out the back with an exacto knife. You can use some of the remaining back piece to cut out some small shapes to match the corners of the device and put it inside the border for extra cushion.
Sometimes this method fails if the TPU case is not a tight fit because it slides around a bit and just feels sloppy to hold. If there is enough remaining case left over, try to cut out another layer to go inside the border and it usually works.
Once I purchased one of the completely clear TPU cases that have that weird texture that makes your hand get really sweaty, anyways the case was very poorly designed as it was off with the measurements. So I put the the case on and used a heatgun to tighten the grip it had over my phone (being careful not to hit the phone too much) - I couldn't believe how well it worked.
Anyways I hope you are successful
I would pay so much for one. I tried to make my own and it worked for a couple weeks but dust would get in there and ruin the back of the phone.
have you guys seen the one's for the nexus 4? by poetic i believe? one of those would look amazing on the DNA we should contact them to see if anything is possible!
Get the poetic case its really nice.
HI all! I just got the Nokia made Lumia 920 Protective Cover CC 1043. It's a fantastic fit and feels just like the original finish of the matt NL920. it's very nicely made and it's almost invisible on the phone! it's great product for someone who want's keep the original look and color while adding a lot of protection!
Here's a video review:
http://youtu.be/YkY-6dnK26U
Highly recommended!
HTCalltheway said:
HI all! I just got the Nokia made Lumia 920 Protective Cover CC 1043. It's a fantastic fit and feels just like the original finish of the matt NL920. it's very nicely made and it's almost invisible on the phone! it's great product for someone who want's keep the original look and color while adding a lot of protection!
Here's a video review:
http://youtu.be/YkY-6dnK26U
Highly recommended!
Click to expand...
Click to collapse
I have been looking for a review on this. I have tried various cases on my L920 and while most of them are pretty good I was wondering if this one from Nokia would be actually better than say the Case Mate case which is my current fav. Looks like this offers more protection and with my Zagg screen protector I should hopefully have no dramas.
I've never used any other case. but this one is fantastic. perfect size/fit, and very slim. after a few says of use I don't notice the extra thickness at all. it's pretty much perfect I don't know how other cases could be better.
It hasn't been mentioned -- but does this case provide better "grip" than the phone? Before I got the case that I am using, I dropped the phone because is slipped out my hand ... the one that I am using has bumps along the side so that it provides a really good grip to the phone when I pull it out of the holster ...
But the case that I am using -- while it works, has a funky small strip on the bottom that does not lie flat. However, the grip is the main reason that I use the case -- and I have heard good thing about the fit of the Nokia case ...
So, can you comment on the Nokia case and its grip as compared to the phone?
RJH57108 said:
It hasn't been mentioned -- but does this case provide better "grip" than the phone? Before I got the case that I am using, I dropped the phone because is slipped out my hand ... the one that I am using has bumps along the side so that it provides a really good grip to the phone when I pull it out of the holster ...
But the case that I am using -- while it works, has a funky small strip on the bottom that does not lie flat. However, the grip is the main reason that I use the case -- and I have heard good thing about the fit of the Nokia case ...
So, can you comment on the Nokia case and its grip as compared to the phone?
Click to expand...
Click to collapse
I find the grip to be some better.. not too much difference. my phone too slipped out of my hands with out a case a few times, but so far (12 days) it hasn't happened with the case yet.
just let you all know, make sure there's no dust particles between the case and phone when you put the case on, the sand will scratch the back of the phone over time and little "spots" will be left.
RJH57108 said:
It hasn't been mentioned -- but does this case provide better "grip" than the phone? Before I got the case that I am using, I dropped the phone because is slipped out my hand ... the one that I am using has bumps along the side so that it provides a really good grip to the phone when I pull it out of the holster ...
But the case that I am using -- while it works, has a funky small strip on the bottom that does not lie flat. However, the grip is the main reason that I use the case -- and I have heard good thing about the fit of the Nokia case ...
So, can you comment on the Nokia case and its grip as compared to the phone?
Click to expand...
Click to collapse
I've just gotten mine (even tho the phone isn't even here yet lol). It feels good but it's definitely more slippery than the OEM case for the 800, still a good deal anyway IMHO.
Do take care of dust particles though, especially is you have a matte finish L920. I got my L920 scratched badly by this case. I am still not sure it was actually caused by dust particles but that is the popular believe.
Here is my post on wpcentral. If you read though till the end, I also found a solution from keeping the phone in good shape.
http://forums.wpcentral.com/nokia-lumia-920/218416-lumia-920-black-cc-1043-yellow-problem.html
Sent from my GT-N7100 using xda premium
Yes the spots on the matte phone is caused by dust between phone and case, here's an explanation:
youtube vid HERE
vnvman said:
I've just gotten mine (even tho the phone isn't even here yet lol). It feels good but it's definitely more slippery than the OEM case for the 800, still a good deal anyway IMHO.
Click to expand...
Click to collapse
A guy at work had the case, and I decided to get it ... better fitting than the TPC case I was using, but it was too slippery ... tried some egrips on the sides, but they did not stay on the curves on the case ...
I thought about it, and put a series of grooves along the edges (cut with a band saw) and these have helped a lot! The cuts are about 1/4 mm deep, and spaces about 1 - 1.5 mm apart. The grooves are about 1 mm wide (the width of the blade cut).
Just another way to have both the fit of the CC-1043 with the grip that I wanted ...
took the gray one for my lumia. to prevent me removing the case every now and then so there won't be any particles, i placed on a wet install protector from gadgetshieldz. seems to do its work. love the gray color.
Two issues, don't know if anyone has had this: one is discolouration around the edges from use, and the second is that the cutouts for the flash and camera/backplate aren't 100%. Now, as a disclaimer, I purchased from a supposedly reputable eBay seller, so while I believe my case is genuine, there IS a chance it is not.
I found this review of the Nilkin case for the Xperia P helpful, and wanted to give back by posting a review of my own. Had been pretty keen on the Nilkin case myself, but after reading the reports of the corners cracking, I went looking for another quality option and ended up with a Rock Quicksand. This is a "dark grey" model I bought from Casesss.com.
Note the white specks that appear on the case are bits of dust/fluff that aren't part of the case surface - sorry for overlooking these but they didn't look that visible while taking the pics, and it'd be too much of a pain setting up my tripod and lighting again to redo them nicely with my crappy camera. Also note the pics convey a sort of "white speckliness" overall which is not how it looks in person - IMO, the case looks better than it appears in the pics.
First, the positives:
- The material is really nice. It looks and feels classier than silicone or textured plastic.
- With moist/sweaty hands, the case provides more grip than the smooth metal surfaces of the phone.
- It allows the phone to sit more securely on your lap or a nearby surface (e.g. train/bus seat) with less fear of it sliding off and onto the floor.
- The cutouts are accurate, and there's plenty of clearance left around the headphone jack.
And the cons/caveats:
- With dry fingers, the material is actually less grippy than the phone's smooth metal surfaces.
- Some reviews of Rock Quicksand cases for other phones suggested the material doesn't grip pocket liners - I disagree. It's not a problem with big/loose pockets on cotton pants, but in more constricted front jeans pockets, it will tend to pull out the pocket liner when removing the phone. Still, it's not as bad as silicone in this respect, and doesn't retain nearly as much fluff/dust as silicone.
- The cutout for the transparent bar is much smaller than one on the Nilkin case. This probably increases the case's strength but doesn't look as cool.
- The buttons are a bit harder to press than without the case, but this seems unavoidable - the cutouts appear as non-intrusive as is possible for this style of case.
Overall, I'm very happy with the case for the purpose of providing extra grip in the situations I most need it and providing some protection, without making the phone look ugly. Would be happy to answer any questions in case I missed anything.
I am also using this product. Very good case.
Sent from my LT22i
can one get it online?
The thin band over the camera volume keys power sim speaker.. tend to brake soon... that's the only thing i don't like... and its very often due to the case's rigid body..
Else i highly recommend it... I am currently using an Soft Silicon-Jelly Case.. for an local manufacture..
Adityagrao said:
The thin band over the camera volume keys power sim speaker.. tend to brake soon... that's the only thing i don't like... and its very often due to the case's rigid body..
Else i highly recommend it... I am currently using an Soft Silicon-Jelly Case.. for an local manufacture..
Click to expand...
Click to collapse
Screenies please?
Following up with something I just observed today: at the bottom right corner, the "sand" material has rubbed off, leaving a shiny surface. I've been using the case for about a month and I'm not sure when this occurred. That corner isn't exposed to repeated friction against anything, so it seems as though a one-off contact with something probably caused it.
rogue operator said:
Following up with something I just observed today: at the bottom right corner, the "sand" material has rubbed off, leaving a shiny surface. I've been using the case for about a month and I'm not sure when this occurred. That corner isn't exposed to repeated friction against anything, so it seems as though a one-off contact with something probably caused it.
Click to expand...
Click to collapse
I use this case and this appears to be a problem that arises over time. I keep my phone in my pocket and over two months the edges have lost a lot of sand coating. It doesn't affect the usability of the case but can look pretty ugly. I can't take a photo now but will post one soon.
Another notable thing about this case is that if you have a creaky bottom cap from removing the cap too much, this case will hold the cap securely in place and stop the creaking.
EDIT: Here are some photos of the quicksand peeling. The lighting isn't great but you can see it clearly enough.
http://i.imgur.com/816DFkO.jpg
http://i.imgur.com/1OEzJkd.jpg
peeled too much... which casing can on get or leather pouch?
Zap_12100 said:
I use this case and this appears to be a problem that arises over time. I keep my phone in my pocket and over two months the edges have lost a lot of sand coating. It doesn't affect the usability of the case but can look pretty ugly. I can't take a photo now but will post one soon.
Another notable thing about this case is that if you have a creaky bottom cap from removing the cap too much, this case will hold the cap securely in place and stop the creaking.
EDIT: Here are some photos of the quicksand peeling. The lighting isn't great but you can see it clearly enough.
http://i.imgur.com/816DFkO.jpg
http://i.imgur.com/1OEzJkd.jpg
Click to expand...
Click to collapse
uhm very bad....did you go tu the beach or something???
I used to use this case and yes, it's beautiful at first but after a long time of using, it become ugly and i must change another one =.=
i wish i can find one of those in Egypt ,
I also got one of this case but mine is purple and the rubber of some place on the casing have lost but between it's a nice case I'm happy with it.
After just over three months use, I can report the "sand" has now rubbed off the rear corner adjacent to the one I pictured on the previous page (that one hasn't gotten any worse since the picture was taken). The three other front corners also show the same sort of wear, but smaller. The edges and larger surfaces show no signs of wear.
In my case, it seems most likely the wear is being caused simply by the phone rubbing against the pocket liner when in my jeans/jacket pocket, so it's not a very durable surface. With just the corners worn, mine still looks classier overall than other cases and I'd just as soon choose it again over the alternatives, but I can't recommend it to those whose phones are treated less softly than mine, as it may end up looking like crap in a short period.
Very usefull case it is..:good: protects the device very well....
I have a quicksand case for my Xperia Sola. I just got it a few months back and so far I'm quite happy with it. The overall build quality seems to be very robust. However on two corners the rubber starts to come off, but that doesn't really bother me as long my phone is save
i haven't use case for a yeah and now my XP look like old phone :cyclops:
is the available for xperia go?
GGG
** I will post some pictures later today - I'm at work currently **
The Nillkin Fresh case came about 2-3 days ago and I was quite excited. But that was short lived. The case is a faux-leather flip cover case with a thin plastic shell on that clips to the phone. It looks decent enough, but I have some problems with mine (possibly QC problems):
The case though didn't completely fit!! Along the right side (near the SD/SIM) it is a bit warped - not bad or noticeable unless your looking right at it and for it.
The case is held closed by a magnet, but the magnet on the flip cover is quite small which then requires it to be precisely over the other pole or it does nothing. Not a big deal, but I wish this was thought out better.
Additionally, one of the main features of the case is (link below) how the case being used as a stand. The flip cover is a tri-fold design which should act as a stand but I haven't had much luck with it. The inside of the seemingly leather flip cover is a soft touch, almost suede, material that is quite slippery. This plus the fact that the case seems to be needing to be broken in makes for the "stand" feature unusable... it falls right over currently. (I have tried multiple configurations).
Over all, I bought the case on eBay for $9.99 with no shipping cost (ships from china - companies home country) and it took about 15 days to get here (in the US). Not bad, but I am already looking for a replacement that will make my device feel premium again rather then cheap.
Would I recommend this case? Yes, but only as a temporary case until more come out - like the official Sony cases or a case from Incipio (link below).
** Complete side note: I had a Nillkin case for my old Nexus 4 which only lasted a few short months because the leather started to peel away from the flip cover! I knew this would be a temporary case when I bought it, so keep that in mind!
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3526&page=1
http://www.incipio.com/cases/smartphone-cases/sony-smartphones/sony-xperia-z-ultra-cases.html
I was fortunate to get to try that case out and many others (being in hk and china) - and I posted about this case. It's unfortunate you didn't read my post and what case eventually went with in the big Z ultra case thread.
This case is definitely not recommended if you want one to work well with desk stand, and want to use the trifold ipad style cover as a stand.
The snap-in style plastic mounts doesn't make it easy to pop in and out of to use the desk stand, and the plastic mounts are shiny thus looks and feels cheap.
Finally, the cover doesn't even come close to the quality and feel of the ipad cover, even the vinyl kind. The material is stiff and plasticky and most importantly doesn't fold together to function as a working stand at all. It will unfold/collapse and fall over.
In addition, there's an issue with the the magnet. With the magnet closed, there is a gap between the last third of the tri-fold cover and the phone's screen. This gap exists because the case (mold or design) is not the right fit - the wider flap makes it essentially unable to align with the opposing magnet. If you try to push the flap down to get rid of the gap, you inadvertently push/slide the magnet off and the cover comes loose. In practice, the magnet will never be engaged because you'll always push the cover down somehow (pocket, bag, stacking something on top).
The only Nillkin I recommend is the http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3516&page=1 shield case. I ended up buying the black one for scenarios where I don't want a flip cover. The fit is good, texture is good (good grippy backside), and it doesn't look too cheap (no shiny plastic). It's decent protection for rougher than usual situations. There are sections where there's a thin piece of plastic on the edge of the phone (like over the usb flap) where it feels weak, cheap and easily breakable. Besides that only issue, I like this case as a back-up.
For a flip cover case that works well with a desk stand, actually stands up, and feels decent quality - I recommend Kaso and Krussell. I went with Kaso as a cheaper alternative for now.
So I guess it's not just me... which is kind of a bummer, but I have already found a replacement. Now if only October 22 was here (my Birthday) I could get a new case!
Thanks for the replay, some good thoughts there!
toonhead85
Funny how the 2 Nillkin cases the OP talks about are the exact 2 I bought online.
I bought the white Fresh, and Yellow leather.
Anyway, after having used both, now I know that flip covers, despite the protection it gives, tend to get in the way of general use. Answering calls involve one extra hassle step.
Taking pictures, you have to roll the flip cover up into the triangle as if you are going to use it as a stand and hold it in your left hand, because simply flipping it and folding it over will obstruct the camera.
Nothing wrong with the build quality...I am sure it is better than most cheapos out there. All the useful ports are left uncovered (one of the reasons why I chose Nillkin...there is actual thought process that has gone into the design). If you want to use the magnetic charging port, not many other manufacturers apart from Nillkin make them uncovered.
The yellow I chose is less vibrant in colour (than what it seemed on screen), and does not go so well with the white ZU I have, so that got retired until the day I get SBH-52 and leave my phone in the bag.
For the Nillkin Fresh, I got in white, and am very happy with it, and currently in use.
It has a nice tight fit, seems to be made of good tough plastic, and the texture on the back helps with general grip.
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
The number of times that i thought that I had closed the USB port properly, but was still slightly open (thus not making it fully waterproof) has prompted me to get the magnetic charging cable. I knew it was something I wanted while I was out choosing the case, so for those who are still looking for cases, I won't say go Nillkin, but make sure you go for one that has the magnetic charging port uncovered.
Whether you buy DK-30 is a different debate. Some like it, but some find it expensive for what it is. There are not many covers out there tat allow you to dock with it on.
But the USB magnetic charging cable is something I believe every ZU owner should have. For that reason get a cover with the port uncovered.
jewelkobayashi said:
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
Click to expand...
Click to collapse
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
liqn7 said:
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
Click to expand...
Click to collapse
Here u go
jewelkobayashi said:
Nothing wrong with the build quality...
Click to expand...
Click to collapse
I came back to post a quick update about the case I got and this caught my eye... actually the build quality is the reason as well!!
The case is broken ><. On the top left hand side (near the charging port) the case has snapped. A piece is broken clean off and only after about 2 weeks. I know the case was $10, but I also had build quality issues with a Nexus 4 case, so I am going to say the quality is rather low.
With this new information, I am going to say stay away from this case. The long import time (from HK to US), and poor quality aren't worth it. Spend the few extra bucks and get a quality case you will have for more than a few weeks.
Just my 2 cents though...
toonhead85
What are peoples experiences with the official Silicone case?
I just picked one up yesterday and I am very impressed. Here is a link to a very quick video I made of it.
PROS
It adds little bulk to the phone (19mm thick so it adds 10.5 mm to the phone)
Matches the style of the phone well
Does NOT feel cheap and nasty at all
Silicone is smooth and a little slippery so it can slip in and out of your pocket easily
But is grippy enough that it doesn't feel like it will slip out of my hand
Button presses feel just the same as without the case on (very easy to press)
Cut outs are precise and perfectly cut
Soft inside and will not mark or damage the phone
Seems like it would give good basic fumble drop protection
The case protrudes past the front of the screen giving front drop protection (but does not encroach on the touch area of the screen)
Super subtle little 'G' logo on the back to match the 'G' on the back of the phone
CONS
It is a bit of a lint and dust magnet. If you have tissues in your pocket etc it picks it up all the time
Silicone near volume can 'bulge' a little bit as it doesn't have as much support as parts of the frame where there is the internal poly-carbonate to make it 'hug' the phone
Is thicker than the having no case at all
Full side cutout at the bottom around the speaker and charging port ( could have been slotted for the single speaker and charging port)
More colours would be a nice to have (gradient or two tone colour would have been awesome)
EDIT - noticed a tiny issue identified in another review (https://www.youtube.com/watch?v=dGkpOP9TWBc). I don't think it is a deal breaker. Other review had very different thoughts on it. Maybe his was not as well produced as mine.
Thanks for the review! I was debating getting one of these, but I was worried it would be too sticky and make the phone hard to take out of my pocket. It sounds like it's not too bad except for the lint and dust. Maybe it's worth a try. Now to decide if I should wait for blue. Google must hate colors or something.
My top case choices are:
Silicone Pixel Case by Google
Otterbox Commuter
Incipio Carnaby
I want one, but I feel like $35 is kind of steep. If a third party made a copy of the three layer design and was cheaper I'd probably get it.