Hi all I want to ask for your help on that and made a mistake when installing the application GooManager.
I happen to install the application on my tablet GooManager back to my current rom, but the problem that I have is that my tablet really has the lock fastboot, and for that reason I have been looking for other alternatives in order to install custom roms without losing the current rom.
But now I'm in serious trouble because Goomanager urge upon the OpenRecovery-also install TWRP-2.5.0.0-hws7300u.img. using OPENRECOVERYSCRIPT.
This worked perfectly and manages to do the installation, but the problem is that not good for my huawei tablet and did not start properly.
I have now a recovery.img which is the stock of the tablet, but as I have the fastboot lock, I can not install it with adb and other methods I found surfing the web, so I ask for your help, if I can I can show you how to install the stock recovery in a safe and transparent, you do not need that this unlock fastboot.
Or if I can use the OpenRecoveryScript GooManager Scrip somehow to not install the OpenRecovery-TWRP-2.5.0.0-hws7300u.img and achieves install my recovery.img which is what I want to use.
I have similar problem. Installed TWRP 2.5 but it's buggy, cannot complete data backup (hangs with reboot). I need to install a previous twrp version but can't use fastboot for practical reason and rom toolbox crash while starting to flash twrp 2.3 :|
any hint?
Question: goomanager is able to flash a recovery with tablet on and not via adb fastboot, so can we flash a recovery (twrp or stock) via terminal emulator? How?
used good old dd on /dev/block/mmcblk0p17 partition
How and where..
Working on my brothers mediapad.. he have installed twrp 2.3.2.3 and it cant flash either stock or any roms i tested with. it say faild.
So now i want back to stock rom and stock recovery. Or get this crap to work.
Any help.?
I have understood that it can be repaired but from linux, you have to press the button volume + and volume-for more than 30 seconds, this connected via USB and then get access to the 32 partitions mediapad there looking for the recovery.img and replace it by ready stock and fixed the problem.
TheMasterMindGT said:
I have understood that it can be repaired but from linux, you have to press the button volume + and volume-for more than 30 seconds, this connected via USB and then get access to the 32 partitions mediapad there looking for the recovery.img and replace it by ready stock and fixed the problem.
Click to expand...
Click to collapse
how do you return from 10.1 cynogenmod the stock rom?
Related
Hi
I hope someone can help me with this.
I have updated my P8 from B200 Lollipop to B317 Marshmallow. Update completed with come errors in stock recovery but phone seems to be in perfect order and fully updated to the latest build.
Now my problem is I've lost the root access. I was expecting this to happen after the update but now I can't re-root it.
In fastboot, I can flash twrp 2.8.7.0 and twrp 2.8.7.0 no problem. It all seems ok in fastboot window, however after recovery is flashed I'm trying to access it from bootloader holding power + volume up.
Unfortunately, at first phone was in bootloop and after a few loops was starting normally, and recovery was back to stock. Now after another few ties of flashing twrp recoveries and trying to access it it goes straight to stock recovery, like custom was never installed. Does not even give me bootloop anymore.
I have tried to press and hold both volume buttons but with similar result.
Recovery is not important to me as long as I have get my phone rooted but it seems like there is no other way to push SuperSU to the system without the custom recovery.
KingRoot app worked with Lollipop byt it fails now.
Booting to recovery without installing it also dees not work from fastboot.
Does anyone have an idea how to root this B317 or have tried the roll back to B200 with success ?
same
I'm in the same situation.
What is the solution?
OK. The nu twrp is the solution
Here
So, I kind of rooted my device using Kingo Root and it wasn't successful (I guess). So, in fastboot mode, I tried OEM unlock and it didn't work too; but anyway, I flashed TWRP recovery into my phone and through that I tried to install CM 13,14 custom ROMs which was completely unsuccessful. It doesn't allow me to install any ROM. And says that root privilege is lost. And now, all that I have access to is a phone stuck in bootloop and TWRP which doesn't allow me anything to do because apparently root access is lost. :crying:
I tried every method of flashing via YGDP tool and it is stuck at 'entering download mode'. I have installed different drivers over and again to fix as suggested by different threads but still, it's the same. [Windows 8.1] . And is there any other tool to flash this same stock ROM or better, can I get root access again in a bricked device and install a custom ROM any way?:fingers-crossed:
I also have access to ADB sideload via TWRP, so can I get stock ROM in .zip format. So far, I can only find it in .CPB format; maybe I can use .zip stock ROM via ADB sideload to flash it. Please help if any of this is possible.
*Apology for such a long question but I think you guys must know everything in order to provide me with a fix*
It's fixed.
dhananjaydhiman said:
So, I kind of rooted my device using Kingo Root and it wasn't successful (I guess). So, in fastboot mode, I tried OEM unlock and it didn't work too; but anyway, I flashed TWRP recovery into my phone and through that I tried to install CM 13,14 custom ROMs which was completely unsuccessful. It doesn't allow me to install any ROM. And says that root privilege is lost. And now, all that I have access to is a phone stuck in bootloop and TWRP which doesn't allow me anything to do because apparently root access is lost. :crying:
I tried every method of flashing via YGDP tool and it is stuck at 'entering download mode'. I have installed different drivers over and again to fix as suggested by different threads but still, it's the same. [Windows 8.1] . And is there any other tool to flash this same stock ROM or better, can I get root access again in a bricked device and install a custom ROM any way?:fingers-crossed:
I also have access to ADB sideload via TWRP, so can I get stock ROM in .zip format. So far, I can only find it in .CPB format; maybe I can use .zip stock ROM via ADB sideload to flash it. Please help if any of this is possible.
*Apology for such a long question but I think you guys must know everything in order to provide me with a fix*
Click to expand...
Click to collapse
Its fixed now, I assume it was because of the ROM file being downloaded through chrome in phone, I downloaded ROM and GApps in PC and flashed through TWRP and bam! Its back on:laugh:
TWRP - 2.4.4
ROM - Resurrection Remix 5.7.2
Thanks anyways!
So hey! I successfully booted into the TWRP and used it to flash the DISABLEFORCEENCRYPTION file, right after. I decided to reboot to recovery (Cause I think that would be great just after you flash something in TWRP) but then after it finishes showing the pocophone booting screen rather than showing TWRP recovery. It showed the stock MIUI recovery! someone please help! I just finished flashing magisk and a custom rom by using the method of: Everytime I need to flash something using TWRP I would just open adb and fastboot boot recovery it again so that I could use the TWRP!
Thank you in advance!
GGerniWhite said:
So hey! I successfully booted into the TWRP and used it to flash the DISABLEFORCEENCRYPTION file, right after. I decided to reboot to recovery (Cause I think that would be great just after you flash something in TWRP) but then after it finishes showing the pocophone booting screen rather than showing TWRP recovery. It showed the stock MIUI recovery! someone please help! I just finished flashing magisk and a custom rom by using the method of: Everytime I need to flash something using TWRP I would just open adb and fastboot boot recovery it again so that I could use the TWRP!
Thank you in advance!
Click to expand...
Click to collapse
I decided to fix this problem after I flashed a rom cause I think I would run into future problems involving magisk and it's use of the TWRP recovery.
GGerniWhite said:
I decided to fix this problem after I flashed a rom cause I think I would run into future problems involving magisk and it's use of the TWRP recovery.
Click to expand...
Click to collapse
If you already have the ROM installed, use adb to flash TWRP and without booting flash Magisk and then boot to system. If you are on stock ROM, follow THIS.
For entering into TWRP, use the key combination of volume up + power buttons.
You can use the encryption compatible TWRP (search for it) instead of the official one.
Hello everyone,
I have a redmi note 4X with MTK soc
The bootloader is unlocked.
I want to flash TWRP recovery. I use adb, the "nickel " TWRP, and message in the cmd window was "ok"
but when i reboot, whatever the way (buttons or adb reboot), it still reboot on the stock recovery.
I've tryed many times, even with a "moly" TWRP (with my MI 4S, the "aqua" didn't work and I had to flash the "libra" one and it was all effective)
Tryed to re install adb, etc. Wathever, it's always "ok" in adb but still reboot on the stock recovery.
Can't try with flashtool or that kind of (Mitool Flash atc) because I can't find the right "scatter" files....
Does anyone have a clue? what is blocking?
Thanks for help
You must reboot back to recovery, not to system, after installing TWRP.
1. Install TWRP
2. Reboot to Recovery (not to system) - this means you will see TWRP screen again
3. Now you can reboot to System
This is only done for the first time installing TWRP. Next time, TWRP will always be there.
Hello,
Well please I need new help !!
Now I'm fighting a new issu !! Now that I at last managed to flash TWRP, and enter in this custom recovery, my phone don't boot system anymore !! stay stuck on the MI logo (
Do I need to flash the boot.img ? But why the hell would a recovery flashing would have change the boot partition??
And if so, where please could I find the boot.img for MIUI 10.1 stable?
Hello,
For those who have the same issu.
I've flashed a boot.img file found in unzipped miui rom zip.
- download from xiaomi.eu the right rom
- unzip
- find the boot.img file
- flash it with adb / fastboot
Well, So now I have my phone and datas back, and can boot on a custom recovery; but TWRP don't work well. Doesn"t keep the settings, can't install anything (it doesn't find any file when exploring ) and can't wipe cache (as if it can't read partition). That's all I tryed by now, I despair a little and that's a lot of time for an easy thing (was very easy on other phones)
Well, this time I'm flooded, i' ll take somme time but don't give up trying to root that phone
Start again, and I recommend ZCX-TWRP-3.0.2-X-REDMI_NOTE4-MTK_Nikel-16.11.18.img and Magisk instead of SuperSU
https://xiaomifirmware.com/downloads/twrp-custom-recovery-redmi-note-4-mtk/
How i can root lolipop stock ROM of lenovo tab 2 a7-10f ?
I have tried kingroot and much more methods, but doesnt support.
I heard people say that lolipop version cant be rooted, just kitkat version which is first ROM. Lolipop is OTA upgrade from Lenovo.
I dont want to flash ROM, i want to use some tools which are available throught root.
I have tried flashing TWRP throught unlocked bootloader (fastboot), when i run command:
fastboot flash recovery c:\twrp.img
It says, done.
But i cant eneter recovery, and i flashed it multiple times, and it says it flashed fine.
But when i use key combination i enter in stock recovery.
And i tried diffrent command (i didnt know that command is bad idea)
fastboot flash boot c:\twrp.img
And i stucked in twrp recovery, it coudnt boot in normal system, because i changed what android should boot.
I extracted from stock ROM, boot.img and flashed it only in fastboot.
And booted normaly, but when i run on recovery, i saw i deleted it's stock recovery.
I was freaked, and i didnt touched anything anymore, i lost stock recovery but i dont care, i care that tab is still alive.
I'm not able to flash anything in any other way that fastboot which is quite scary to use if tab is working good (i dont want to break if something works)
How i can root it.
I have knowledge of adb commands but with all that knowledge i didnt managed to get root to this device, it looks like it's locked in that way.
Lolipop is best, it is very good and accesibile, and i just want to tweak it more with some xposed modules and apps that support root.