Just downloaded new ROM named CarbonRom for my htc evo 3D GSM version.
here is the link - http://forum.xda-developers.com/showthread.php?t=2271325
I dont know how to flash it. Nothing mentioned there about how to flash it.
On other ROMs it is mentioned which which baseband(radio) to flash before flasing the ROM but in this nothing is mentioned.
I downloaded the ROM and gapps,
Should i start away flash the ROM i need to flash any baseband first.
Right now i am on Mwakious ROM - http://forum.xda-developers.com/showthread.php?t=1648407
can anybody help me.
Assuming you're s-off and with a custom recovery
Reboot in recovery, do a backup, do a factory reset, flash the rom then flash gapps
Reboot and enjoy
Sent from my HTC Evo 3D GSM using xda app-developers app
helicopter88 said:
Assuming you're s-off and with a custom recovery
Reboot in recovery, do a backup, do a factory reset, flash the rom then flash gapps
Reboot and enjoy
Sent from my HTC Evo 3D GSM using xda app-developers app
Click to expand...
Click to collapse
Thanks for the answer, currently m on ICS and do i need to update any firmware or radio /?
thanks
Flash rom, flash gapps, make a nandroid backup, put the latest PG86IMG.zip in your sd, flash it via bootloader, boot into recovery and restore backup! Hope that helps friend!
Related
hey everyone. so my question is about the flash image gui. if I flash a kernel through it and reboot recovery, am I able to wipe the rom using superwipe right then and there? or do I have to reboot recovery again to make the kernel stick so superwipe doesn't touch it before flashing the rom. pretty sure that's clear. but if not let me know. thanks for everyone who looks and helps!
When using flash image GUI to flash a kernel. You don't need to go into recovery at all afterwards. Should be good. When installing a ROM with a custom kernel flash superwipe script then flash ROM in recovery boot phone then flash kernel VIA image GUI. Then test your wifi, 4g, data, calling etc.
sent from America...F__k Yeah!
Actually you had it right the first time. You flash the kernel first, reboot into recovery, wipe then flash the rom. Wiping won't touch the kernel you just flashed.
Sent from my PG86100 using XDA App
Jabawockee said:
When using flash image GUI to flash a kernel. You don't need to go into recovery at all afterwards. Should be good. When installing a ROM with a custom kernel flash superwipe script then flash ROM in recovery boot phone then flash kernel VIA image GUI. Then test your wifi, 4g, data, calling etc.
You should change this post as you could cause problems for people. If someone is changing from sense rom to an AOSP rom, or vise versa, you definitely want to flash kernel first with flash image gui.
sent from America...F__k Yeah!
Click to expand...
Click to collapse
Sent from my PG86100 using XDA App
Because of s-on I don't think that the superwipe script can affect the boot partition of the phone so your good with what you say OP.
Sent from my PG86100 using Tapatalk
JayDaKissEP said:
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Oh! Thats weird because thats how I have been doing it. Everything works for me. I been on just about all ROMS out there...from ICS to sense 3.5 and now the lastest firmware running imbredded ROM. Only once I had a problem with a kernel when I updated to latest OTA using my method above. I then used flash image gui to flash the stock kernel (boot.img) and everything worked fine after.
thanks everyone for answering! I was pretty sure the superwipe wasnt able to erase the kernel being 1.5, just wanted to have some clarification
I have a Problem to flash any AOSP ROM on my EVO 3D (GSM). The Leedroid ROM works good, but when i flash AOSP based ROMs like E3DLight or CM9, the phone doesn't boot. It hangs on the splash screen.
Try clearing data before flashing.
I did a factory reset, data wipe and dalvik cache wipe.... but still it hangs on splash screen. I have flashed Virtuous Quattro Sense, but it doesn't work too.
Schenten said:
I have a Problem to flash any AOSP ROM on my EVO 3D (GSM). The Leedroid ROM works good, but when i flash AOSP based ROMs like E3DLight or CM9, the phone doesn't boot. It hangs on the splash screen.
Click to expand...
Click to collapse
If you are s-on first flash boot.img via fastboot or "flash image gui" and then flash new rom.
try flashing a super wipe script. i think you can find it in the virus thread linked to the first post. After flashing the zip your recovery should reboot then flash the room as per usual.
Another problem may be the kernel, are you s-off? Because aosp ROM require an aosp kernel and if you dont have s-off you need to flash the kernel in a different way.
Sent from my HTC EVO 3D X515a using xda premium
jekyll86 said:
If you are s-on first flash boot.img via fastboot or "flash image gui" and then flash new rom.
Click to expand...
Click to collapse
yeah this one....wipe everyhting including system 1st
or downgrade your bootloader
yes i have s-off (HTC method). I try super wipe . Thanks for the answers
Where can i find super wipe script?
Okay, i found the synergy script and the Android Revolution script, but on both i got an Error (Status 1).
I've now seen, I have S-ON . Sorry guys.
HELLO GUYS
MY HTC EVO 3D GSM CAN ROOT TO mwakious3Drom® ?
i is S-on unlock.
I Yesterday try root mwakious3Drom®,but after Unlimited reboot,in the mwakious3Drom® System logo boot Screen.
need to s-off can root mwakious3Drom®?
s-on can not root mwakious3Drom®?
very so sorry.i am English so bad.
so sorry,i can not Replies, so open New posts,very so sorry.
i Just want to Know Reason and Solve my Problem.
Thank you.
I am s-on running mwakious v11.2
Make sure u are using 4ext recovery with smartflash on
First install the base v11 rom with smartflash on
Reboot phone, let it load up once
Go back to recovery
Turn off smartflash
Install v11.1
Clear cache +dalvik
Reboot
Go back to recovery, check smarflash is off then install v11.2
Wipe cache + dalvik
DONE!!
Enjoy the new ROM
Sent from my HTC EVO 3D X515m using xda app-developers app
sgaheer said:
I am s-on running mwakious v11.2
Make sure u are using 4ext recovery with smartflash on
First install the base v11 rom with smartflash on
Reboot phone, let it load up once
Go back to recovery
Turn off smartflash
Install v11.1
Clear cache +dalvik
Reboot
Go back to recovery, check smarflash is off then install v11.2
Wipe cache + dalvik
DONE!!
Enjoy the new ROM
Sent from my HTC EVO 3D X515m using xda app-developers app
Click to expand...
Click to collapse
not need flash boot.img? thank you!
i am using rec..cwm 4.0.1.4.
i now try install 4ext.
if i Complete root v11,but now not V11.1..can install v11.2?
i don't know install Mwakious ROM ,i install after fastboot flash boot boot.img after boot black Screen and Unlimited reboot.
help me Everyone i need your Help. thank you very much!
Just try to install a 4ext recovery, mate..
Then you can try to flashing mwakious rom again.. Let us know if you still can't fix it..
Sent from my HTC EVO 3D X515m using Tapatalk 2
Hey, I'm getting similar results with s-on unlocked.
Using 4ext recovery control, flash the v11 rom (superwipe), goes into bootloader, installs, warns about boot change, reboots.
From then on it loops the HTC splash, black screen with the buttons backlight, reboot.
Flashing the boot.img using fastboot doesn't make a difference.
Any ideas?
DaveL88 said:
Hey, I'm getting similar results with s-on unlocked.
Using 4ext recovery control, flash the v11 rom (superwipe), goes into bootloader, installs, warns about boot change, reboots.
From then on it loops the HTC splash, black screen with the buttons backlight, reboot.
Flashing the boot.img using fastboot doesn't make a difference.
Any ideas?
Click to expand...
Click to collapse
You may need to go S-OFF as well.
Otherwise, try a different ROM.
If you want to stay S-ON, I can recommend the KingCobra V1.2 or V1.5 ICS ROM.
Both are stable. V1.2 still has beats support, V1.5 is a newer version.
However, V1.6 won't work since you're S-ON.
Good Luck!
DaveL88 said:
Hey, I'm getting similar results with s-on unlocked.
Using 4ext recovery control, flash the v11 rom (superwipe), goes into bootloader, installs, warns about boot change, reboots.
From then on it loops the HTC splash, black screen with the buttons backlight, reboot.
Flashing the boot.img using fastboot doesn't make a difference.
Any ideas?
Click to expand...
Click to collapse
Read carefully my previous post,
Flash the v11 base ROM with SMARTFLASH ON!
let it reboot
Boot back to recovery
Flash v11.1 update with SMARTFLASH OFF!
wipe cache and dalvik
Reboot
Reboot into recovery
Flash v11.2 update with SMARTFLASH OFF!
reboot
Done
REMEMBER THAT SMARTFLASH MUST BE OFF FOR THE UPDATES
I ran into the same problem and this method fixed it
Sent from my HTC EVO 3D X515m using xda app-developers app
saiku1314 said:
not need flash boot.img? thank you!
i am using rec..cwm 4.0.1.4.
i now try install 4ext.
if i Complete root v11,but now not V11.1..can install v11.2?
i don't know install Mwakious ROM ,i install after fastboot flash boot boot.img after boot black Screen and Unlimited reboot.
help me Everyone i need your Help. thank you very much!
Click to expand...
Click to collapse
Read my previous post carefully and follow every step
make sure that u have the latest 4EXT RECOVERY
You do NOT need to flash boot. Img when using 4ext
Sent from my HTC EVO 3D X515m using xda app-developers app
thank you everybody.
what is smartflash.i Original not smarflash.
i Clear cache +dalvik > install mwakiousV11 > flash boot.img after boot black Screen and Unlimited reboot.
i Clear cache +dalvik > install mwakiousV11 > reboot > not Signal not wifi >UP V,11,2 >go to screen after not respond in screen.
i have install radio for 11.77.3504.00P_11.25.3504.06_M from official release 3.28.707.
i install after reboot,install rom.↑
but,i don't not smartflash this is what,i Thought install 4ext recovery On Success.:<
Again thank everybody!:laugh:
i try Look for Teaching. if Brothers in the here,Hope give me link!
MR.DjDom i try look for you say your rom. thank you and everybody the help!
how SmartFlash off it.
saiku1314 said:
thank you everybody.
what is smartflash.i Original not smarflash.
i Clear cache +dalvik > install mwakiousV11 > flash boot.img after boot black Screen and Unlimited reboot.
i Clear cache +dalvik > install mwakiousV11 > reboot > not Signal not wifi >UP V,11,2 >go to screen after not respond in screen.
i have install radio for 11.77.3504.00P_11.25.3504.06_M from official release 3.28.707.
i install after reboot,install rom.↑
but,i don't not smartflash this is what,i Thought install 4ext recovery On Success.:<
Again thank everybody!:laugh:
i try Look for Teaching. if Brothers in the here,Hope give me link!
MR.DjDom i try look for you say your rom. thank you and everybody the help!
how SmartFlash off it.
Click to expand...
Click to collapse
Good to hear that it all worked out for you!
If you have anymore questions, feel free to ask.
i give up this rom.:<
DjDom and everybody have Stable rom Introduction?
i installX Series] Virtuous Eclipse sense 4.0 No problem.
only mwakious3Drom® Have a problem.:<:<:<:<:<:<:<
i need Stable rom Hope have Brothers Introduction give me.
thank you very much everybody!good guys!
saiku1314 said:
i give up this rom.:<
DjDom and everybody have Stable rom Introduction?
i installX Series] Virtuous Eclipse sense 4.0 No problem.
only mwakious3Drom® Have a problem.:<:<:<:<:<:<:<
i need Stable rom Hope have Brothers Introduction give me.
thank you very much everybody!good guys!
Click to expand...
Click to collapse
Here's the ROM I'm using: http://forum.xda-developers.com/showthread.php?t=1647674
It's KingCobraICS.
However, download version 1.2 or 1.5.
1.6 will NOT work if you are S-ON.
If you want Beats audio, download version 1.2.
If you want the latest S-ON version, download 1.5.
This ROM is very stable and I've been using it for a long time!
i tyr sgaheer Provide Method Also can not!
i Really give up.i Decide install DjDom Introduction OF ROM!
saiku1314 said:
i tyr sgaheer Provide Method Also can not!
i Really give up.i Decide install DjDom Introduction OF ROM!
Click to expand...
Click to collapse
Another possible fix
Download mwakious rom v7 base
Once downloaded get the boot. Img from the folder
After using previous steps to get up to v11.2
Use the fastboot flash boot boot.img command (cant remember if this is the exact command just check to make sure) to flash the boot from v7.
This is the last method i can think of hopefully u can get this rom running or you could just stick with whichever other one you chose
Sent from my HTC EVO 3D X515m using xda app-developers app
DjDom said:
Good to hear that it all worked out for you!
If you have anymore questions, feel free to ask.
Click to expand...
Click to collapse
1.6 s-on Forever can not Use?
i Would like to Latest ROM!
Because,Latest ROM will Compare GOOD!
BUT,I am hboot 149.0012 can not Demote!:< ( MY HTC EVO 3d Come from HKONG KONG)
I Again thank you
i Success UP FOR 1.5 THANK YOU!!!!!!:>
but not htc sense AND Theme.. (Resolved)
i Tomorrow Again try install mwakious3d!THANK YOU!
Everyone i would like try Again flash mwakious3Drom® ,but i would like Everyone can Tell me flash Step to me.(Detailed)
I hope to know what is wrong here.
Thank you very much and everyone!
i English is so bad.if have Offend i am very sorry!
Thank you!
sgaheer said:
Another possible fix
Download mwakious rom v7 base
Once downloaded get the boot. Img from the folder
After using previous steps to get up to v11.2
Use the fastboot flash boot boot.img command (cant remember if this is the exact command just check to make sure) to flash the boot from v7.
This is the last method i can think of hopefully u can get this rom running or you could just stick with whichever other one you chose
Sent from my HTC EVO 3D X515m using xda app-developers app
Click to expand...
Click to collapse
^ This. If you can't boot v11, then do this method. So flash v11 and then v11.2 and use the boot.img from v7 and flash it with fastboot. It will work without a problem. Worked for me. But remeber to turn off smartflash when u flash v11.
raZr0708 said:
^ This. If you can't boot v11, then do this method. So flash v11 and then v11.2 and use the boot.img from v7 and flash it with fastboot. It will work without a problem. Worked for me. But remeber to turn off smartflash when u flash v11.
Click to expand...
Click to collapse
thank you very much!
i Success install mwakious ^_^!(FOR NOW)
i use Super Wipe after install mwakious .
i use 4eX Recovery Touch V1.0.0.5 RC5
need flash boot.img?
but i up for v11.2 Did not respond in The main screen.............(reboot after Back to normal wifi can not...)
flash boot.img after Unlimited reboot...
i flash v7 boot.img is No problem,but first boot would stop the screen...(i would Continue test)
but why flash v11 boot.img can not Normal use...(Because i'm is s-on unlock?)
i flash v7 boot.img,now need to flash v11 boot.img?
_____________________________________________________________________
Quickly up for 11v3 ..i flash v11.3 need use super wipe?
v11 latest Firmware/Radio already Installed? i Baseband is 10.55.9020.00p_10.13.9020.29_m
i put PG86IMG save in the sd card .into the bootloader but not give me Select yes or not upgrade...
me is s-on unlock...
I'm having troubles when i wan't to install this ROM :
http://forum.xda-developers.com/showthread.php?t=2555350 .
I'm using the dl from the first post, i'm using fastboot flash boot boot.img (the boot.img i'm getting from the zip-file).
I do a factory reset from the bootloader, then i do a factory reset in the twrp recovery
then i flash the boot.img in the jb hboot 1.25.0002
then i flash the zip file and i reboot.
but i never get to see the boot image. just a black screen...
Can someone help me?
tcornelis said:
I'm having troubles when i wan't to install this ROM :
http://forum.xda-developers.com/showthread.php?t=2555350 .
I'm using the dl from the first post, i'm using fastboot flash boot boot.img (the boot.img i'm getting from the zip-file).
I do a factory reset from the bootloader, then i do a factory reset in the twrp recovery
then i flash the boot.img in the jb hboot 1.25.0002
then i flash the zip file and i reboot.
but i never get to see the boot image. just a black screen...
Can someone help me?
Click to expand...
Click to collapse
You're definitely using a TWRP recovery made for JB hboot? @GtrCraft, did you put the right boot.img inside the zip?
Also, you can try flashing a custom JB kernel of your choice.
@dansou901 I believe so, flashing this (http://forum.xda-developers.com/showthread.php?t=2344254) work like a charm (except for the rom that hasn't got any wifi, ...)
How can i check to be sure?
tcornelis said:
@dansou901 I believe so, flashing this (http://forum.xda-developers.com/showthread.php?t=2344254) work like a charm (except for the rom that hasn't got any wifi, ...)
How can i check to be sure?
Click to expand...
Click to collapse
For booting that ROM a CM kernel is needed. As you have installed one (if it works like you said), you need to install a JB Sense kernel (just pick one from Original Android Development section). Then reinstall SuperSense and you should be fine.
I'll give that a go and let you know
@dansou901 , i've used this boot.img (http://forum.xda-developers.com/showthread.php?t=2337389) because i've already been able to flash that rom as well.
but now i can't seem to get rid of my previous custom rom. i've done a factory reset, i wiped everything there is to wipe, i've flashed the above boot.img and supersense but it's still another custom rom on my device :s
tcornelis said:
@dansou901 , i've used this boot.img (http://forum.xda-developers.com/showthread.php?t=2337389) because i've already been able to flash that rom as well.
but now i can't seem to get rid of my previous custom rom. i've done a factory reset, i wiped everything there is to wipe, i've flashed the above boot.img and supersense but it's still another custom rom on my device :s
Click to expand...
Click to collapse
That's a CM kernel as well. I told you to use a Sense kernel. Use this one for example: http://forum.xda-developers.com/showthread.php?t=2483489
and your recovery should work again as expected. Btw, which recovery did you install? Please give the link.
this is the twrp recovery.img http: // teamw . in / project / twrp2 / 140 (yeah, can't post outside links yet)
i'll give that one a shot
tcornelis said:
this is the twrp recovery.img http: // teamw . in / project / twrp2 / 140 (yeah, can't post outside links yet)
i'll give that one a shot
Click to expand...
Click to collapse
That one's made for ICS, if I recall correctly... Don't use it. Use this one instead: http://forum.xda-developers.com/showthread.php?t=2099513 But be sure to use a JB version.
After changing my recovery, finally i was able to flash the custom rom. I used the boot.img you gave me, but is that going to affect some of the features in the rom?
And i would like to thank you allready
tcornelis said:
After changing my recovery, finally i was able to flash the custom rom. I used the boot.img you gave me, but is that going to affect some of the features in the rom?
And i would like to thank you allready
Click to expand...
Click to collapse
No, it's not. You can however choose the kernel yourself as I said... But keep in mind that it has to be a JB Sense kernel (just read the OP of the kernel thread carefully, then you'll know). For recoveries, keep this in mind.
No Title Here
The boot.img in the SuperSENSE-dx5 zip is stock, every JB Sense kernel should work though
GtrCraft said:
The boot.img in the SuperSENSE-dx5 zip is stock, every JB Sense kernel should work though
Click to expand...
Click to collapse
His problem wasn't the kernel but the wrong recovery he used, it's fixed now.
Sent from my HTC Desire X using XDA Premium 4 mobile app
dansou901 said:
His problem wasn't the kernel but the wrong recovery he used, it's fixed now.
Sent from my HTC Desire X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Perfect :good:
I have a soft bricked Evo LTE I was trying to s-off the phone but usb debugging is a prerequisite and the phone doesn't boot to system, only hboot In the meanwhile I'd like to restore stock rom and then have the choice whether or not i wanna s-off the phone Really I just need to restore it to stock rom The kernel, a zip file, can't be flashed through recovery and there's no way to flash it through fastboot either I think What I need is a nandroid back since twrp is installed and working so if someone could give me a back I could restore through twrp rather than having to flash Please help! Thanks
You can flash the kernel via fastboot. No need to worry about USB debugging. Hit the top link in my sig and scroll down to the section on S-on kernel flashing. Otherwise, I suggest installing a ROM like MeanBean if you're on the old partition layout, as it has a kernel installer to aid with flashing while S-on.
Sent from my HTC M8
Flashing Kernel via fastboot HTC Evo LTE
OK I flash the kernel via fastboot using boot.img file but when I install the rom, Jewel_2.13.651.1_OTA_odexed_rooted_signed.zip, through recovery I get an error "kernel not installed" I'm running hboot 1.15 with s-on and twrp recovery Like I said before the phone's bricked it doesn't get past the HTC quiety brilliant screen
Magnum_Enforcer said:
You can flash the kernel via fastboot. No need to worry about USB debugging. Hit the top link in my sig and scroll down to the section on S-on kernel flashing. Otherwise, I suggest installing a ROM like MeanBean if you're on the old partition layout, as it has a kernel installer to aid with flashing while S-on.
Sent from my HTC M8
Click to expand...
Click to collapse
Did you try flashing the kernel after the ROM?
Sent from my EVO using XDA Premium 4 mobile app
Yes Maybe it's the rom i'm trying to install I dunno All I really need to do is boot the phone so i can enable usb debugging so I can s-off the phone and then installing roms should be easier Maybe I should ask for someone to post a nandroid backup? What's a good valid stock rom for this phone?
fizbanrapper said:
Did you try flashing the kernel after the ROM?
Sent from my EVO using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Flash this ROM in recovery. Make sure you follow the installation instructions and also do a full wipe.
http://forum.xda-developers.com/showthread.php?t=2048229