Hi
I have a problem with my tablet GOCLEVER Table R75.
When you connect it via USB or by pressing the switch
Tablet nothing at all to react, after ramping up when I touch the processor (RK2906) and connected via usb processor is very hot, if a little wait my windows 7 is it as unknow device. What I do
Sorry for my bad english
Related
Is there any possibility to review this tablet back to life ?There is no boot, no starting picture , nothing .hen i connect it to PC via USB and i hold the power on button the PC say unknowing device .I have tried put there drivers for RK2818 - bad drivers or something ..Is there any other possibility to review this device with something like JTAG (RX,TX connection ) ?Or i need just find the right driver for USB ?
Hi,
I had an accident and fromat flash from my ifive mini 3gs.
My iFive mini 3GS won't turn on. However it get detected by windows as unknown device. I was trying to install rockchip drivers but they won't install for 64 bit windows 7.
I have backup files.
When trying to turn on holding power button screen is black. Also can't get into recovery mode.
Any solution or idea would be welcome! maybe jtag recovery?
Why are you trying install rockchip drivers when your iFive mini 3GS is an MTK6592 device??
you should install mediatek drivers/
are you sure you have the mini 3GS model ?
My driver is right but...
...also my tablet now is recognized like a "unknow device", now I try to send back to the store, I think only the FNF can fix this problem, maybe with a JTAG connection and right software.
Solved (thanks rrileypm), just wait until the battery is empty, after open SP flash toll and push download, then connect the tablet, now wait 1-2 minutes until windows make "ding" for usb device connection, at this point your sp flash tool is working and flashing your tablet, then unplug your tablet and ejoy it.
Hi mates,
I have chines tablet and i touched something on rooting and since then my tablets boots only when it is connected with PC through USB, if i disconnect usb cable off tablet immediately boot icon it appears at tablet. HELP PLS?!!!
hello guy's, my tablet work's ok and then won't turn on at all, DEAD, when i connected to PC, AML flash tool detected, Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C(RootHub)-port5, any sugestion please?
Hi everyone!
I have an Onda V701s tablet that runs on the Allwinner A31s SOC. Specifications of this tablet can be found here: https://www.imei.info/phonedatabase/onda-v701s/
While trying to root the tablet with ADB commands, I bricked the device. When powering on the device, it is stuck on the Onda boot logo. This boot logo shows the brand logo with the text "SINCE 1989" underneath it. The device does not boot any further, no matter how long I wait.
I've tried to connect the tablet to my Windows 11 (64-bit) laptop in a special download mode using the following steps:
Power off the tablet
Press and hold volume button
Connect USB cable from the tablet to the laptop
Press the power button up to 10 times until the tablet is recognized by the laptop
These steps indeed result in a different connection between my laptop and the tablet, but I am still unable to flash the stock firmware. To do this, I've tried LiveSuit and PhoenixSuit, but both pieces of software do not recognize the tablet (no device connected).
Does anyone here have experience with flashing bricked Allwinner chipset devices?
If more information is needed to solve this issue, please let me know
yo ask this guy on fivver he knows everything https://www.fiverr.com/mateenqamar564?source=inbox