Is there any possibility to review this tablet back to life ?There is no boot, no starting picture , nothing .hen i connect it to PC via USB and i hold the power on button the PC say unknowing device .I have tried put there drivers for RK2818 - bad drivers or something ..Is there any other possibility to review this device with something like JTAG (RX,TX connection ) ?Or i need just find the right driver for USB ?
Related
Hello,
Few weeks ago I updated my Tablet to ICS with AiO-Tool by condi. Today I tried to connect my Tablet to PC to use some of the AiO-functions. But my Tablet doesn't show up in devices list in Windows. In device-manager there is no device that could be my tablet. Normally it says "Unknown device" but there is still nothing
Does anybody has the same problem or knows how to solve this? Thank you
djlars
Try to set usb debugging off. Then connect and re enable it again. If that doesn't work restart you tab in recovery mode let you pc install the driver and then reboot system. If your pc doesnt show any thing then try a other usb port on your pc last you could try is to use a device thats compitable with your tab like a camera or something but you will need the official kable from sony to connect the micro usb to normal usb...
Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
ivko1982 said:
Hi everyone
I think you guys can help me with this:
Sanei N10 3g with qualcomm snapdragon is bricked.
All this happend when I pressed vol- vol + and power all together, some window popped up and I had a new drive, but when I tried to turn sane i on notthing happend.
When I press the power button nothing happens, when I connect it on USB port it is recgonized as Qualcomm USB HD QLoader 9008(on COM port 3)
When I install Live Suite 1.07 or 1.09 it is recgonized as vid_1f3a_pid_efe8 but it always gives me code 10(device cannot start) which is actually right, I cannot start my sanei.
I unsolderd the battery and when I solderd it back notthing happend but i got a new device (HD AUDIO MODEM DEVICE), something like that but I cannot find the drivers.
I also used Qpst tools and it is recgonized as phone in download mode??? What is this?
I have downloaded a new firmware from sanei website, but dont now what to do with it. There is no .img file(except boot and recovery)
Now it just lays on my table.
Please help
Click to expand...
Click to collapse
you can find the answer to unbrick the device here
http://www.forum.tabletworldstore.co...ch-tablet.html
Hi all...
I received my THL W100 yesterday from an italian reseller... I ordered it already rooted and it arrived directly fron Hong Kong with the latest firmware 130711 and prerooted with Superuser (I checked it with root checker and it's effectively rooted...).
It also has it's own recovery pre installed (when I enter the recovery mode with pover+volume up it appears an "android recovery"...)...
I wanted to flash a different recovery (the Barry63 recovery) and so proceeded with installing in one of my four pc (running win XP SP3) the drivers I founf inside the Ro.edi package... after this, I turned off my phone, disassembled the battery, put the usb cable both on my phone and on my pc and finally inserted the battery... I hear the tipical sound played when you put a new USB device in a computer and immediately after (a secondo or so...) a second sound tipical of when you disconnect your USB device... all in all my phone automatically disconnects and this results in a "non installation" of the Mediatek USB preloader I neeed to use the SPFlashtool...
I tried on anoter pc of mines, running Win XP (a modded version) and got the same result...
I also tried another pc running Win7 Home Premium , forced the installation of the Mediatek USB preloader via the "hdwwiz" method, put the usb cable in both the phone and the pc, re-connected the battery and... it recognizes the new device, starts to install the Mediatek USB preloader, but after some seconds it says "device diconnected"....
Same issue on the fourth and last pc of mine running Win 7 starter...
It's like my phone has something in the firmware (root?Recovery?) that doesn't allow me to install the Mediatek USB preloader...
Any idea about it ?
My phone works perfectly, the pc recognizes it both as USB archive and USB debug... I can do almost all the things I want (the phone is rooted and so I installed all the apks I wanted, included the MobileUncleTools... but I can not use the SPFlash tool as I can not install the MediaTek USB preloader... :crying:
Thank you in advance for you precious answers...
usb debugging
did you enabled "usb debuging" in developer settings.
android---central.com/how-enable-developer-settings-android-42
buyukbalkan said:
did you enabled "usb debuging" in developer settings.
android---central.com/how-enable-developer-settings-android-42
Click to expand...
Click to collapse
Yes... it was enabled...
Anyway I solved the problem... I discovered that what it happened to my phone is the "supposed to be" for that driver... in fact, after launching SPFlashtool and press dowload, when you plug in the battery on the phone SPFlash recognize the phone and starts flashing the right way.
Finally I succeeded in it and flashed the Barry6030 recovery. :laugh:
Thank you :good:
bigboss1970 said:
Yes... it was enabled...
Anyway I solved the problem... I discovered that what it happened to my phone is the "supposed to be" for that driver... in fact, after launching SPFlashtool and press dowload, when you plug in the battery on the phone SPFlash recognize the phone and starts flashing the right way.
Finally I succeeded in it and flashed the Barry6030 recovery. :laugh:
Thank you :good:
Click to expand...
Click to collapse
I'm happy to hear that you can handle it...
Hello guys,for two weeks now i have tried to revive this phone after the last nougat OTA update.After the updated it worked 1 day,during a phone call it completely died.
I get only 5 seconds of elephone logo and then phone turns off.
Now even my computer doesn't recognize it,only showing that unknown USB device as in the photo attached.
I have tried a lot of "how to install the driver on win10" and so on. Win7 and XP machines don't recognize it at all !!! i have all operating systems.
The thing is after the update i doubt it remained adb,mtp,usb debbuging ON.
I removed the battery hoping the SP flash/win10 will recognize it this way...no luck...
If you guys have any suggestions to revive this phone it would be deeply appreciated since i have some stuff i would like to recover from it.
Thanks in advance
Try in win 7 with sp flash tool by pressing power + vol up or down dont remember then plug in usb and flash stock 7 good luck
As i wrote above,I have tried Win7 and XP and also the "recovery mode" trick but it doesn't recognize it,Only windows 10 is giving me that message as in the photo,Windows 7 doesn't do absolutely nothing.I have flashed this phone many times with different roms and stock rom and so on.Recovery mode doesn't even work anymore.
In one sentance i can't get the phone cu comunicate with any of the 3 pc's that i have,Win XP , Win 7 , or Win 10...so SP flash is kinda useless....
Seems to be driver issue reinstall it try other usb ports and wait for windows is installing preloader driver you must use sp flash tool there is no other way to get it back to live and when you flash you must press power and vol up or down all the time....then plug in and good tip there are some threads here in forum where the technic is explained keep searching good luck
Hello guys,
I'm a bit sad, I broke my S6 screen today. It's not a big deal, already ordered a new phone. The really sad thing is the pictures / recorded call with my wife on this phone. I can't access to it throug PC because I can't click the "Ok" pop up when I connect it to the computer. He is not in USB Debug mode also. Is there a way to cast the phone on the PC screen without USB Debug ? Or can I force the USB Debug ? I'm a bit lost...
Thanks a lot,
Hi , can you see that pop UP on your Screen ? if yes , you can use OTG USB kable and connect your Mouse on your phone .
Hello Teddy, thank you for your help !
Unfortunatly, I can't see anything it's just black. I've read about plugging a mouse with an OTG USB cable, but in my case, I won't have any use because it's broken so hard that nothing just show on the screen, no matter what I do.
I've read some stuff accross this forum, and I've found few clues about what to do, like using ADB / Odin. But as far as I understand, my phone need to be in USB Debug mode in order to work with ADB. There is also a solution that comes with something nammed Vaysor that can help you cast your screen on your PC, but again, you also need to be in USB Debug mode, wich i'm not in.
So I'm still lost at this point.
Regards;
There is also another way with flashing ADB enable file on Odin . So my question is what is your model of your phone ?
Hey Teddy ! Thanks for the help again.
My phone is a Galaxy S6 from Samsung.
Do you need the exact model or it is enough ? Is the exact model is needed, tell me I'm gonna have to search on the basement for the user's manual
Yes , You have Model : on the bottom of rear glass example SM-G920F , or G920T , G920A ,G928P .
Damn Teddy, you are right ! I've never noticed this before !
It's the SM G920F
Thanks again for your concern.
Unfortunatly this ADB method will probably not save your data , but you can flash custom recovery by odin which has already adb enabled .
Requirement
1. PC with internet connection
2. Odin
https://odindownload.com/download/Odin3_v3.12.3.zip
3.Custom recovery
https://dl.twrp.me/zeroflte/twrp-3.2.1-0-zeroflte.img.tar
Once you finish downloading those files , open Odin , click on AP choose twrp-3.2.1-0-zeroflte.img.tar put your phone in download mode by Holding together Vol- ,Home button and the Power button at the same time for about 7 second .
Once you feel is booting , release power button but keep holding Vol - and home few second , and then one time press Vol +.
Now connect your phone on pc and wait for Com port to be recognised on ODIN it will be green color , once you see that click on Start and wait to finish flashing new recovery.img .
Good Luck
Hello Teddy !
So, my date are going to be lost this way ? I can skip the pictures, but the recorded conversations with my wife are the most important for me. It reminds me the "good old time", before she start screaming at me because I forgot to take out the trash... I've hearded of Vysor, Where you can cast your phone on your PC. But to make Vysor work, you need both ADB and your phone on USB Debug. So, is there a way to put the phone on USB Debug with Odin / ADB or anything ?
Thanks for you help again.