Related
Gents
I need your advise.I tried to upgrade my XT910 from GB 2.3.6 to 4.0.4 through RSD.Everything went OK but my XT910 did not start after upgrade.It always stuck on Motorola Logo and try to boot but again going to black screen and then again Motorola logo apperas.
I tried to enter in AP Mode pressing Power+Vol Up+Vol down but it is not going in Recovery and just blinking and then Motorola Logo apperas.
My PC is also not detecinting XT910.It detects only as USB drive.One Driver calls MTP always trying to install on my PC and failed.
Can anyone assist me how to recover it.
masaud said:
Gents
I need your advise.I tried to upgrade my XT910 from GB 2.3.6 to 4.0.4 through RSD.Everything went OK but my XT910 did not start after upgrade.It always stuck on Motorola Logo and try to boot but again going to black screen and then again Motorola logo apperas.
I tried to enter in AP Mode pressing Power+Vol Up+Vol down but it is not going in Recovery and just blinking and then Motorola Logo apperas.
My PC is also not detecinting XT910.It detects only as USB drive.One Driver calls MTP always trying to install on my PC and failed.
Can anyone assist me how to recover it.
Click to expand...
Click to collapse
restart your PC.
Make sure u have all the required drivers for your phone.
Make sure u have the latest RSD.
If possible, try to re-download the fastboot file again.
I hope you are not flashing a ROM through RSD.
All the best.
circleofomega said:
restart your PC.
Make sure u have all the required drivers for your phone.
Make sure u have the latest RSD.
If possible, try to re-download the fastboot file again.
I hope you are not flashing a ROM through RSD.
All the best.
Click to expand...
Click to collapse
Thanks for your advise.I already tried this way but problem is that RSD is not reconsizing XT910.As I mention earlier I can not go in Recovery mode and my PC is also not reconizing XT910.It only reconize it as USB Device and trying to install one driver called MTP but always failed.
masaud said:
Thanks for your advise.I already tried this way but problem is that RSD is not reconsizing XT910.As I mention earlier I can not go in Recovery mode and my PC is also not reconizing XT910.It only reconize it as USB Device and trying to install one driver called MTP but always failed.
Click to expand...
Click to collapse
Then u can do two things. Get hold of another PC, friend, cousin, X GF anyone. And try everything again on that PC.
Also, try to get a new cable. USB cable could be faulty too.
Also , u have written ur phone didn't start after the upgrade. What was the message showing in RSD exactly. And what fast boot files did u use?
Could u post the link??
Sent from my XT910 using Xparent ICS Blue Tapatalk 2
circleofomega said:
Then u can do two things. Get hold of another PC, friend, cousin, X GF anyone. And try everything again on that PC.
Also, try to get a new cable. USB cable could be faulty too.
Also , u have written ur phone didn't start after the upgrade. What was the message showing in RSD exactly. And what fast boot files did u use?
Could u post the link??
Sent from my XT910 using Xparent ICS Blue Tapatalk 2
Click to expand...
Click to collapse
Thanks.I will try using other PC today.I already tried changing other USB cable but result is same.RSD is not reconizing XT910 and MTP driver falied everytime to install when ever I connect XT910 to my PC.
Whenever I connect XT910 to my PC now.It only shows USB of XT910 and ask me to install moto cast from USB.
I downloaded Fastboot file from below link
http://www.eternityproject.eu/topic...-official-fastboot-package-for-motorola-razr/
Look for this thread:
Re: 676.226.3.en.EU (For Retail EU) ICS Leak [UPDATE]
Download the fast boot files from here. U have XT910, GSM RaZr right??
Sent from my XT910 using Xparent ICS Blue Tapatalk 2
My Motorola XT910 did not start after upgrade
Dear All ,
I have the same problem mentioned below
im tring to power on the phone from the power key but nothing happen. when pressing Power+Vol Up+Vol down, It always stuck on Motorola Logo and try to boot but again going to black screen and then again Motorola logo apperas.
have any one a solution for that problem??
"I need your advise.I tried to upgrade my XT910 from GB 2.3.6 to 4.0.4 through RSD.Everything went OK but my XT910 did not start after upgrade.It always stuck on Motorola Logo and try to boot but again going to black screen and then again Motorola logo apperas.
I tried to enter in AP Mode pressing Power+Vol Up+Vol down but it is not going in Recovery and just blinking and then Motorola Logo apperas.
My PC is also not detecinting XT910.It detects only as USB drive.One Driver calls MTP always trying to install on my PC and failed.
Can anyone assist me how to recover it."
I had a problem like this on my xt910 ics. I eventually worked out that I had filled the storage (damn you Gameloft). A full wipe/restore fixed it. I used this utility from droidrzr(dot)com developed mattlgroff. droid-razr-utility-182. Sorry, I can't post links yet...
Sent from my Nexus 7 using xda app-developers app
Its pleasure to inform u that i have lost ma CID .
Anybody can activate Mass storage option Via USB?
I tried even with Bootmenu Manager latest version...
Lolz bt ya feeling pleasure after loosing ya customer id ..haha .. I believe ya tried to flash different region ota or rom on ya phone .. Aite no problem if ya can able to switch on ya phone .. have ya tried usb connection apps from market .. If not try it because ya able to switch on ya phone so it might b work on ya phone ..
Sent from my XT910 using Tapatalk 2
Having same exact problem
I accidentaly deleted my cid.img and cant find a way to connect my device to my computer
seveindras said:
I accidentaly deleted my cid.img and cant find a way to connect my device to my computer
Click to expand...
Click to collapse
Its not cid problem at all .. Check ya usb data cable or install drivers properly once again .
Hit the thx button if i helped ya in anyways
He can't mount his phone with an deleted CID, no matter what App or stuff he use.
The only way is to root it and install BMM, to bypass the CID Error without BPTools. Adb is still functional, so he's still able to root.
Gesendet von meinem XT890 mit Tapatalk 2
I got used verizon droid razr maxx ( *Not unlocked*, i guess) & using it on international gsm sim. My PC does not recognize the device....whenever i connect it to PC, it only charges it, no Mass storage, MTP or PTP...debug mode is checked.
Is it because of CID issue??
re-installed drivers too...but no success
thanks!
docneo99 said:
I got used verizon droid razr maxx (unlocked, i guess) & using it on international gsm sim. My PC does not recognize the device....whenever i connect it to PC, it only charges it, no Mass storage, MTP or PTP...debug mode is checked.
Is it because of CID issue??
re-installed drivers too...but no success
thanks!
Click to expand...
Click to collapse
Did you have cid error or boot?
Sent from my Google's Glass
TheMrcool212 said:
Did you have cid error or boot?
Sent from my Google's Glass
Click to expand...
Click to collapse
No...just pop up sim from unknown source!
I'm in your situation as well...
accidentally deleted cid, reboot idiotly,
stuck in the logo with white annoying words above,
only BP tools can let me into the system.
now when the usb is connected,
the options (MTP, Mass storage..etc) didn't show up,
and the computer can't detect my phone!
my XT910 can't be rooted now because the installation needs reboot,
and afteer rebooting it will stuck at the logo then can't proceed, and root fail.
what can i do?
:crying::crying::crying::crying:!!!!!!
baoo123 said:
I'm in your situation as well...
accidentally deleted cid, reboot idiotly,
stuck in the logo with white annoying words above,
only BP tools can let me into the system.
now when the usb is connected,
the options (MTP, Mass storage..etc) didn't show up,
and the computer can't detect my phone!
my XT910 can't be rooted now because the installation needs reboot,
and afteer rebooting it will stuck at the logo then can't proceed, and root fail.
what can i do?
:crying::crying::crying::crying:!!!!!!
Click to expand...
Click to collapse
I think that you can root your phone...
You say that the installation needs reboot when you start rooting,I think it has to be 3 reboots.
Just boot every time with BP tools,I mean,when the phone shutdown the first time,don´t wait it to boot itself,just push & hold Vol - and Vol+ and power button and boot via BP tools.
Just repeat that 3 times and you should be good :fingers-crossed:
welder73 said:
I think that you can root your phone...
You say that the installation needs reboot when you start rooting,I think it has to be 3 reboots.
Just boot every time with BP tools,I mean,when the phone shutdown the first time,don´t wait it to boot itself,just push & hold Vol - and Vol+ and power button and boot via BP tools.
Just repeat that 3 times and you should be good :fingers-crossed:
Click to expand...
Click to collapse
hi there!
you mean when the moment the device is going to reboot,
quickly press the buttons, and choose BP tools?
baoo123 said:
hi there!
you mean when the moment the device is going to reboot,
quickly press the buttons, and choose BP tools?
Click to expand...
Click to collapse
Exactly!
welder73 said:
Exactly!
Click to expand...
Click to collapse
thanks!
successfully rooted my XT910!!!
baoo123 said:
thanks!
successfully rooted my XT910!!!
Click to expand...
Click to collapse
I'm glad that I helped
Sent from my Razr XT910
I have this problem, but I can not in any known Brazilian forum to be able to fix my unit, I wish I could fix it if you know one way or unable to install ubuntu for phone.
AP fastboot flash mode (s) (boot failure)
0A.77
eMMC info: size 16G
To return to moral mode - first press power key to power down
device is locked. Status code :0
battery OK
OK to program
connect USB
data cable
I
Invalid GG OTU(CG: system): Invalid SP DATA
Invalid GG HAB(CG: system, status: 0x004E)
Invalid GG OTU(CG: system)
Reflash the fastboot using RSD Lite
Sent from my GT-N7100 using xda app-developers app
does not work
TheMrcool212 said:
Reflash the fastboot using RSD Lite
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
not recognized by RSD, the device does not appear to reinstall OS
Tocaterror said:
not recognized by RSD, the device does not appear to reinstall OS
Click to expand...
Click to collapse
Make sure you have motorola usb drivers installed on your pc
Sent from my GT-N7100 using xda app-developers app
TheMrcool212 said:
Make sure you have motorola usb drivers installed on your pc
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
And how to do that?
http://forum.xda-developers.com/showthread.php?t=1539192
Look out on this thread ya will get Motorola drivers , download and install and connect ya phone in ap fastboot mode it will defiantly detect ya phone
Edit : Read the method in case ya noob
Hit the thx button if i helped ya in anyways
anurag.dj2u said:
http://forum.xda-developers.com/showthread.php?t=1539192
Look out on this thread ya will get Motorola drivers , download and install and connect ya phone in ap fastboot mode it will defiantly detect ya phone
Edit : Read the method in case ya noob
Hit the thx button if i helped ya in anyways
Click to expand...
Click to collapse
installed and nothing happens, stays the same does not show the device in order to install the RSD
Tocaterror said:
installed and nothing happens, stays the same does not show the device in order to install the RSD
Click to expand...
Click to collapse
Please try to use some of ya friend laptop or PC. Try it once
Hit the thx button if i helped ya in anyways
anurag.dj2u said:
Please try to use some of ya friend laptop or PC. Try it once
Hit the thx button if i helped ya in anyways
Click to expand...
Click to collapse
I do not have to use another computer because I'm not, if you know anything that can make the most from already thank you.
Tocaterror said:
installed and nothing happens, stays the same does not show the device in order to install the RSD
Click to expand...
Click to collapse
Try to boot to AP Fastboot mode through the bootloader by pressing (vol up + vol down + power button) power 5 seconds. And choose AP Fastboot mode. Connect it to your PC.
Sent from my GT-N7100 using xda app-developers app
TheMrcool212 said:
Try to boot to AP Fastboot mode through the bootloader by pressing (vol up + vol down + power button) power 5 seconds. And choose AP Fastboot mode. Connect it to your PC.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
does not work, does not recognize the device.
Use another usb port. If no go, get another PC.
If I understood correct you have a Latam device, if so, you're hard bricked since we don't have an xml firmware ATM.
If so, you must send ur device to Motorola.
Cheers
Sent from my XT910 using xda premium
I am using WIndows 10 (Maybe that's the problem) and trying to flash stock firmware onto an XT912 via RSD Light. 64bit Moto driver (6.4) were installed. I put the phone into boot mode, and then connect the USB cable, but nothing happens - After awhile it reboots and the computer sees the phone, but I doesn't get seen by RSD. It seems like it is not connecting via the Motot drivers but just the stock ones. I went into Device manager and made sure all the drivers were updated but can't get it to connect. ANy thoughts o what I can do. I have tried reinstalling the drivers multiple times and they seem to be there, phone is just seeing them.
guitar1969 said:
I am using WIndows 10 (Maybe that's the problem) and trying to flash stock firmware onto an XT912 via RSD Light. 64bit Moto driver (6.4) were installed. I put the phone into boot mode, and then connect the USB cable, but nothing happens - After awhile it reboots and the computer sees the phone, but I doesn't get seen by RSD. It seems like it is not connecting via the Motot drivers but just the stock ones. I went into Device manager and made sure all the drivers were updated but can't get it to connect. ANy thoughts o what I can do. I have tried reinstalling the drivers multiple times and they seem to be there, phone is just seeing them.
Click to expand...
Click to collapse
what does it say on phone, in AP Fastboot, complete text?
Sent from my XT912 using Tapatalk
sd_shadow said:
what does it say on phone, in AP Fastboot, complete text?
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
Boot Mode Selection Menu (0A.77)
Vol Up Selects, Volume Down Scrolls
Normal Powerup
Recovery
AP Fastboot
BP SBF Flash
BP Only
BP HW Diag & Boot AP
BP Tools
AP Fastboot:
AP Fastboot Flash Mode (S)
0A.77
eWC Info: Size 16G
to return to normal mode - first press power key to power down
Device is LOCKED Status Code : 0
Battery OK
OK To Program
Transfer Mode
USB Connected
When I connect the USB it makes the windows connection sound
guitar1969 said:
Boot Mode Selection Menu (0A.77)
Vol Up Selects, Volume Down Scrolls
Normal Powerup
Recovery
AP Fastboot
BP SBF Flash
BP Only
BP HW Diag & Boot AP
BP Tools
Click to expand...
Click to collapse
no that's the boot menu
select AP Fastboot
Sent from my XT912 using Tapatalk
sd_shadow said:
no that's the boot menu
select AP Fastboot
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
I listed it below right after posting original
guitar1969 said:
I listed it below right after posting original
Click to expand...
Click to collapse
which moto drivers version?
rsd lite version?
Sent from my XT912 using Tapatalk
sd_shadow said:
which moto drivers version?
rsd lite version?
Sent from my XT912 using Tapatalk
Click to expand...
Click to collapse
I believe I got the issue resolved. I ended up just using a different method completely(DROID RAZR Utility XT912 Jellybean) skipping the use of RSD Lite and the whole moto driver. From my research it looks like the moto drivers do not work with Win 8.1, so definitely not Win 10 at this time.
You can close the thread.
Thanks for the help.
guitar1969 said:
I believe I got the issue resolved. I ended up just using a different method completely(DROID RAZR Utility XT912 Jellybean) skipping the use of RSD Lite and the whole moto driver. From my research it looks like the moto drivers do not work with Win 8.1, so definitely not Win 10 at this time.
You can close the thread.
Thanks for the help.
Click to expand...
Click to collapse
the utility requires the same drivers.
Sent from my XT912 using Tapatalk
Hi Guys!! I am in total trouble, I have xt912 Droid Razr Maxx (CodeName: Spyder), I was installing new rom using safestrap. Everything was going fine till I Clean system partition. safestrap also got deleted and now phone is on bootloop (Bricked).
Worst thing is my phone usb port is not working and can't flash my device using RSD! :crying:
Can anyone help me to provide Safestrap/BMM(Boot Menu Manager) Installed Using Recovery? I Can't Install them through apk, device is bricked and no usb option to flash it. .
can anyone help me? any alternate way to flash or any help please help me...!!!! :crying:
ArsalHussain said:
Hi Guys!! I am in total trouble, I have xt912 Droid Razr Maxx (CodeName: Spyder), I was installing new rom using safestrap. Everything was going fine till I Clean system partition. safestrap also got deleted and now phone is on bootloop (Bricked).
Worst thing is my phone usb port is not working and can't flash my device using RSD! :crying:
Can anyone help me to provide Safestrap/BMM(Boot Menu Manager) Installed Using Recovery? I Can't Install them through apk, device is bricked and no usb option to flash it. .
can anyone help me? any alternate way to flash or any help please help me...!!!! :crying:
Click to expand...
Click to collapse
If your USB port is not working, how do you charge your phone???. Can you boot into fastboot?
Guapo613 said:
If your USB port is not working, how do you charge your phone???. Can you boot into fastboot?
Click to expand...
Click to collapse
Yes I Can Boot Into AP FastBoot Mode, and My Computer's USB Ports Are Not Working. Device Hardware Is OK.
ArsalHussain said:
Yes I Can Boot Into AP FastBoot Mode, and My Computer's USB Ports Are Not Working. Device Hardware Is OK.
Click to expand...
Click to collapse
Find a PC that has working USB ports and use RSD lite to flash the stock firmware again. Your probably going to need to boot into AP Fastboot so RSD lite can see your device
Guapo613 said:
Find a PC that has working USB ports and use RSD lite to flash the stock firmware again. Your probably going to need to boot into AP Fastboot so RSD lite can see your device
Click to expand...
Click to collapse
Sorry, But No Any Other PC Is Available For Me And This The Scary!
ArsalHussain said:
Sorry, But No Any Other PC Is Available For Me And This The Scary!
Click to expand...
Click to collapse
Do you have some internet cafe near you?
welder73 said:
Do you have some internet cafe near you?
Click to expand...
Click to collapse
No Brother, I can't Leave House... I need Technical Answers Please. :Crying:
ArsalHussain said:
No Brother, I can't Leave House... I need Technical Answers Please. :Crying:
Click to expand...
Click to collapse
only option is flashing firmware with pc
Sent from my KFFOWI using XDA Labs
Ok ,I Have Make It Done! I Have Ripped One Data Cable And Used It To Charge Phone Directly From The Battery Terminal, That Helped Me To Bypass The Low Battery Issue. Then I Connect USB Datacable From The Phone. and Just Flashed The Firmware! ...
Slot stok room saya ke wiping bagaimana cara mengembalikanya thanks....